grafana/vendor/github.com/hashicorp/go-plugin/client.go

package plugin

import (
	"bufio"
	"crypto/subtle"
	"crypto/tls"
	"errors"
	"fmt"
	"hash"
	"io"
	"io/ioutil"
	"log"
	"net"
	"os"
	"os/exec"
	"path/filepath"
	"strconv"
	"strings"
	"sync"
	"sync/atomic"
	"time"
	"unicode"

	hclog "github.com/hashicorp/go-hclog"
)

// If this is 1, then we've called CleanupClients. This can be used
// by plugin RPC implementations to change error behavior since you
// can expected network connection errors at this point. This should be
// read by using sync/atomic.
var Killed uint32 = 0

// This is a slice of the "managed" clients which are cleaned up when
// calling Cleanup
var managedClients = make([]*Client, 0, 5)
var managedClientsLock sync.Mutex

// Error types
var (
	// ErrProcessNotFound is returned when a client is instantiated to
	// reattach to an existing process and it isn't found.
	ErrProcessNotFound = errors.New("Reattachment process not found")

	// ErrChecksumsDoNotMatch is returned when binary's checksum doesn't match
	// the one provided in the SecureConfig.
	ErrChecksumsDoNotMatch = errors.New("checksums did not match")

	// ErrSecureNoChecksum is returned when an empty checksum is provided to the
	// SecureConfig.
	ErrSecureConfigNoChecksum = errors.New("no checksum provided")

	// ErrSecureNoHash is returned when a nil Hash object is provided to the
	// SecureConfig.
	ErrSecureConfigNoHash = errors.New("no hash implementation provided")

	// ErrSecureConfigAndReattach is returned when both Reattach and
	// SecureConfig are set.
	ErrSecureConfigAndReattach = errors.New("only one of Reattach or SecureConfig can be set")
)

// Client handles the lifecycle of a plugin application. It launches
// plugins, connects to them, dispenses interface implementations, and handles
// killing the process.
//
// Plugin hosts should use one Client for each plugin executable. To
// dispense a plugin type, use the `Client.Client` function, and then
// cal `Dispense`. This awkward API is mostly historical but is used to split
// the client that deals with subprocess management and the client that
// does RPC management.
//
// See NewClient and ClientConfig for using a Client.
type Client struct {
	config      *ClientConfig
	exited      bool
	doneLogging chan struct{}
	l           sync.Mutex
	address     net.Addr
	process     *os.Process
	client      ClientProtocol
	protocol    Protocol
	logger      hclog.Logger
}

// ClientConfig is the configuration used to initialize a new
// plugin client. After being used to initialize a plugin client,
// that configuration must not be modified again.
type ClientConfig struct {
	// HandshakeConfig is the configuration that must match servers.
	HandshakeConfig

	// Plugins are the plugins that can be consumed.
	Plugins map[string]Plugin

	// One of the following must be set, but not both.
	//
	// Cmd is the unstarted subprocess for starting the plugin. If this is
	// set, then the Client starts the plugin process on its own and connects
	// to it.
	//
	// Reattach is configuration for reattaching to an existing plugin process
	// that is already running. This isn't common.
	Cmd      *exec.Cmd
	Reattach *ReattachConfig

	// SecureConfig is configuration for verifying the integrity of the
	// executable. It can not be used with Reattach.
	SecureConfig *SecureConfig

	// TLSConfig is used to enable TLS on the RPC client.
	TLSConfig *tls.Config

	// Managed represents if the client should be managed by the
	// plugin package or not. If true, then by calling CleanupClients,
	// it will automatically be cleaned up. Otherwise, the client
	// user is fully responsible for making sure to Kill all plugin
	// clients. By default the client is _not_ managed.
	Managed bool

	// The minimum and maximum port to use for communicating with
	// the subprocess. If not set, this defaults to 10,000 and 25,000
	// respectively.
	MinPort, MaxPort uint

	// StartTimeout is the timeout to wait for the plugin to say it
	// has started successfully.
	StartTimeout time.Duration

	// If non-nil, then the stderr of the client will be written to here
	// (as well as the log). This is the original os.Stderr of the subprocess.
	// This isn't the output of synced stderr.
	Stderr io.Writer

	// SyncStdout, SyncStderr can be set to override the
	// respective os.Std* values in the plugin. Care should be taken to
	// avoid races here. If these are nil, then this will automatically be
	// hooked up to os.Stdin, Stdout, and Stderr, respectively.
	//
	// If the default values (nil) are used, then this package will not
	// sync any of these streams.
	SyncStdout io.Writer
	SyncStderr io.Writer

	// AllowedProtocols is a list of allowed protocols. If this isn't set,
	// then only netrpc is allowed. This is so that older go-plugin systems
	// can show friendly errors if they see a plugin with an unknown
	// protocol.
	//
	// By setting this, you can cause an error immediately on plugin start
	// if an unsupported protocol is used with a good error message.
	//
	// If this isn't set at all (nil value), then only net/rpc is accepted.
	// This is done for legacy reasons. You must explicitly opt-in to
	// new protocols.
	AllowedProtocols []Protocol

	// Logger is the logger that the client will used. If none is provided,
	// it will default to hclog's default logger.
	Logger hclog.Logger
}

// ReattachConfig is used to configure a client to reattach to an
// already-running plugin process. You can retrieve this information by
// calling ReattachConfig on Client.
type ReattachConfig struct {
	Protocol Protocol
	Addr     net.Addr
	Pid      int
}

// SecureConfig is used to configure a client to verify the integrity of an
// executable before running. It does this by verifying the checksum is
// expected. Hash is used to specify the hashing method to use when checksumming
// the file.  The configuration is verified by the client by calling the
// SecureConfig.Check() function.
//
// The host process should ensure the checksum was provided by a trusted and
// authoritative source. The binary should be installed in such a way that it
// can not be modified by an unauthorized user between the time of this check
// and the time of execution.
type SecureConfig struct {
	Checksum []byte
	Hash     hash.Hash
}

// Check takes the filepath to an executable and returns true if the checksum of
// the file matches the checksum provided in the SecureConfig.
func (s *SecureConfig) Check(filePath string) (bool, error) {
	if len(s.Checksum) == 0 {
		return false, ErrSecureConfigNoChecksum
	}

	if s.Hash == nil {
		return false, ErrSecureConfigNoHash
	}

	file, err := os.Open(filePath)
	if err != nil {
		return false, err
	}
	defer file.Close()

	_, err = io.Copy(s.Hash, file)
	if err != nil {
		return false, err
	}

	sum := s.Hash.Sum(nil)

	return subtle.ConstantTimeCompare(sum, s.Checksum) == 1, nil
}

// This makes sure all the managed subprocesses are killed and properly
// logged. This should be called before the parent process running the
// plugins exits.
//
// This must only be called _once_.
func CleanupClients() {
	// Set the killed to true so that we don't get unexpected panics
	atomic.StoreUint32(&Killed, 1)

	// Kill all the managed clients in parallel and use a WaitGroup
	// to wait for them all to finish up.
	var wg sync.WaitGroup
	managedClientsLock.Lock()
	for _, client := range managedClients {
		wg.Add(1)

		go func(client *Client) {
			client.Kill()
			wg.Done()
		}(client)
	}
	managedClientsLock.Unlock()

	log.Println("[DEBUG] plugin: waiting for all plugin processes to complete...")
	wg.Wait()
}

// Creates a new plugin client which manages the lifecycle of an external
// plugin and gets the address for the RPC connection.
//
// The client must be cleaned up at some point by calling Kill(). If
// the client is a managed client (created with NewManagedClient) you
// can just call CleanupClients at the end of your program and they will
// be properly cleaned.
func NewClient(config *ClientConfig) (c *Client) {
	if config.MinPort == 0 && config.MaxPort == 0 {
		config.MinPort = 10000
		config.MaxPort = 25000
	}

	if config.StartTimeout == 0 {
		config.StartTimeout = 1 * time.Minute
	}

	if config.Stderr == nil {
		config.Stderr = ioutil.Discard
	}

	if config.SyncStdout == nil {
		config.SyncStdout = ioutil.Discard
	}
	if config.SyncStderr == nil {
		config.SyncStderr = ioutil.Discard
	}

	if config.AllowedProtocols == nil {
		config.AllowedProtocols = []Protocol{ProtocolNetRPC}
	}

	if config.Logger == nil {
		config.Logger = hclog.New(&hclog.LoggerOptions{
			Output: hclog.DefaultOutput,
			Level:  hclog.Trace,
			Name:   "plugin",
		})
	}

	c = &Client{
		config: config,
		logger: config.Logger,
	}
	if config.Managed {
		managedClientsLock.Lock()
		managedClients = append(managedClients, c)
		managedClientsLock.Unlock()
	}

	return
}

// Client returns the protocol client for this connection.
//
// Subsequent calls to this will return the same client.
func (c *Client) Client() (ClientProtocol, error) {
	_, err := c.Start()
	if err != nil {
		return nil, err
	}

	c.l.Lock()
	defer c.l.Unlock()

	if c.client != nil {
		return c.client, nil
	}

	switch c.protocol {
	case ProtocolNetRPC:
		c.client, err = newRPCClient(c)

	case ProtocolGRPC:
		c.client, err = newGRPCClient(c)

	default:
		return nil, fmt.Errorf("unknown server protocol: %s", c.protocol)
	}

	if err != nil {
		c.client = nil
		return nil, err
	}

	return c.client, nil
}

// Tells whether or not the underlying process has exited.
func (c *Client) Exited() bool {
	c.l.Lock()
	defer c.l.Unlock()
	return c.exited
}

// End the executing subprocess (if it is running) and perform any cleanup
// tasks necessary such as capturing any remaining logs and so on.
//
// This method blocks until the process successfully exits.
//
// This method can safely be called multiple times.
func (c *Client) Kill() {
	// Grab a lock to read some private fields.
	c.l.Lock()
	process := c.process
	addr := c.address
	doneCh := c.doneLogging
	c.l.Unlock()

	// If there is no process, we never started anything. Nothing to kill.
	if process == nil {
		return
	}

	// We need to check for address here. It is possible that the plugin
	// started (process != nil) but has no address (addr == nil) if the
	// plugin failed at startup. If we do have an address, we need to close
	// the plugin net connections.
	graceful := false
	if addr != nil {
		// Close the client to cleanly exit the process.
		client, err := c.Client()
		if err == nil {
			err = client.Close()

			// If there is no error, then we attempt to wait for a graceful
			// exit. If there was an error, we assume that graceful cleanup
			// won't happen and just force kill.
			graceful = err == nil
			if err != nil {
				// If there was an error just log it. We're going to force
				// kill in a moment anyways.
				c.logger.Warn("error closing client during Kill", "err", err)
			}
		}
	}

	// If we're attempting a graceful exit, then we wait for a short period
	// of time to allow that to happen. To wait for this we just wait on the
	// doneCh which would be closed if the process exits.
	if graceful {
		select {
		case <-doneCh:
			return
		case <-time.After(250 * time.Millisecond):
		}
	}

	// If graceful exiting failed, just kill it
	process.Kill()

	// Wait for the client to finish logging so we have a complete log
	<-doneCh
}

// Starts the underlying subprocess, communicating with it to negotiate
// a port for RPC connections, and returning the address to connect via RPC.
//
// This method is safe to call multiple times. Subsequent calls have no effect.
// Once a client has been started once, it cannot be started again, even if
// it was killed.
func (c *Client) Start() (addr net.Addr, err error) {
	c.l.Lock()
	defer c.l.Unlock()

	if c.address != nil {
		return c.address, nil
	}

	// If one of cmd or reattach isn't set, then it is an error. We wrap
	// this in a {} for scoping reasons, and hopeful that the escape
	// analysis will pop the stock here.
	{
		cmdSet := c.config.Cmd != nil
		attachSet := c.config.Reattach != nil
		secureSet := c.config.SecureConfig != nil
		if cmdSet == attachSet {
			return nil, fmt.Errorf("Only one of Cmd or Reattach must be set")
		}

		if secureSet && attachSet {
			return nil, ErrSecureConfigAndReattach
		}
	}

	// Create the logging channel for when we kill
	c.doneLogging = make(chan struct{})

	if c.config.Reattach != nil {
		// Verify the process still exists. If not, then it is an error
		p, err := os.FindProcess(c.config.Reattach.Pid)
		if err != nil {
			return nil, err
		}

		// Attempt to connect to the addr since on Unix systems FindProcess
		// doesn't actually return an error if it can't find the process.
		conn, err := net.Dial(
			c.config.Reattach.Addr.Network(),
			c.config.Reattach.Addr.String())
		if err != nil {
			p.Kill()
			return nil, ErrProcessNotFound
		}
		conn.Close()

		// Goroutine to mark exit status
		go func(pid int) {
			// Wait for the process to die
			pidWait(pid)

			// Log so we can see it
			c.logger.Debug("reattached plugin process exited")

			// Mark it
			c.l.Lock()
			defer c.l.Unlock()
			c.exited = true

			// Close the logging channel since that doesn't work on reattach
			close(c.doneLogging)
		}(p.Pid)

		// Set the address and process
		c.address = c.config.Reattach.Addr
		c.process = p
		c.protocol = c.config.Reattach.Protocol
		if c.protocol == "" {
			// Default the protocol to net/rpc for backwards compatibility
			c.protocol = ProtocolNetRPC
		}

		return c.address, nil
	}

	env := []string{
		fmt.Sprintf("%s=%s", c.config.MagicCookieKey, c.config.MagicCookieValue),
		fmt.Sprintf("PLUGIN_MIN_PORT=%d", c.config.MinPort),
		fmt.Sprintf("PLUGIN_MAX_PORT=%d", c.config.MaxPort),
	}

	stdout_r, stdout_w := io.Pipe()
	stderr_r, stderr_w := io.Pipe()

	cmd := c.config.Cmd
	cmd.Env = append(cmd.Env, os.Environ()...)
	cmd.Env = append(cmd.Env, env...)
	cmd.Stdin = os.Stdin
	cmd.Stderr = stderr_w
	cmd.Stdout = stdout_w

	if c.config.SecureConfig != nil {
		if ok, err := c.config.SecureConfig.Check(cmd.Path); err != nil {
			return nil, fmt.Errorf("error verifying checksum: %s", err)
		} else if !ok {
			return nil, ErrChecksumsDoNotMatch
		}
	}

	c.logger.Debug("starting plugin", "path", cmd.Path, "args", cmd.Args)
	err = cmd.Start()
	if err != nil {
		return
	}

	// Set the process
	c.process = cmd.Process

	// Make sure the command is properly cleaned up if there is an error
	defer func() {
		r := recover()

		if err != nil || r != nil {
			cmd.Process.Kill()
		}

		if r != nil {
			panic(r)
		}
	}()

	// Start goroutine to wait for process to exit
	exitCh := make(chan struct{})
	go func() {
		// Make sure we close the write end of our stderr/stdout so
		// that the readers send EOF properly.
		defer stderr_w.Close()
		defer stdout_w.Close()

		// Wait for the command to end.
		cmd.Wait()

		// Log and make sure to flush the logs write away
		c.logger.Debug("plugin process exited", "path", cmd.Path)
		os.Stderr.Sync()

		// Mark that we exited
		close(exitCh)

		// Set that we exited, which takes a lock
		c.l.Lock()
		defer c.l.Unlock()
		c.exited = true
	}()

	// Start goroutine that logs the stderr
	go c.logStderr(stderr_r)

	// Start a goroutine that is going to be reading the lines
	// out of stdout
	linesCh := make(chan []byte)
	go func() {
		defer close(linesCh)

		buf := bufio.NewReader(stdout_r)
		for {
			line, err := buf.ReadBytes('\n')
			if line != nil {
				linesCh <- line
			}

			if err == io.EOF {
				return
			}
		}
	}()

	// Make sure after we exit we read the lines from stdout forever
	// so they don't block since it is an io.Pipe
	defer func() {
		go func() {
			for _ = range linesCh {
			}
		}()
	}()

	// Some channels for the next step
	timeout := time.After(c.config.StartTimeout)

	// Start looking for the address
	c.logger.Debug("waiting for RPC address", "path", cmd.Path)
	select {
	case <-timeout:
		err = errors.New("timeout while waiting for plugin to start")
	case <-exitCh:
		err = errors.New("plugin exited before we could connect")
	case lineBytes := <-linesCh:
		// Trim the line and split by "|" in order to get the parts of
		// the output.
		line := strings.TrimSpace(string(lineBytes))
		parts := strings.SplitN(line, "|", 6)
		if len(parts) < 4 {
			err = fmt.Errorf(
				"Unrecognized remote plugin message: %s\n\n"+
					"This usually means that the plugin is either invalid or simply\n"+
					"needs to be recompiled to support the latest protocol.", line)
			return
		}

		// Check the core protocol. Wrapped in a {} for scoping.
		{
			var coreProtocol int64
			coreProtocol, err = strconv.ParseInt(parts[0], 10, 0)
			if err != nil {
				err = fmt.Errorf("Error parsing core protocol version: %s", err)
				return
			}

			if int(coreProtocol) != CoreProtocolVersion {
				err = fmt.Errorf("Incompatible core API version with plugin. "+
					"Plugin version: %s, Ours: %d\n\n"+
					"To fix this, the plugin usually only needs to be recompiled.\n"+
					"Please report this to the plugin author.", parts[0], CoreProtocolVersion)
				return
			}
		}

		// Parse the protocol version
		var protocol int64
		protocol, err = strconv.ParseInt(parts[1], 10, 0)
		if err != nil {
			err = fmt.Errorf("Error parsing protocol version: %s", err)
			return
		}

		// Test the API version
		if uint(protocol) != c.config.ProtocolVersion {
			err = fmt.Errorf("Incompatible API version with plugin. "+
				"Plugin version: %s, Ours: %d", parts[1], c.config.ProtocolVersion)
			return
		}

		switch parts[2] {
		case "tcp":
			addr, err = net.ResolveTCPAddr("tcp", parts[3])
		case "unix":
			addr, err = net.ResolveUnixAddr("unix", parts[3])
		default:
			err = fmt.Errorf("Unknown address type: %s", parts[3])
		}

		// If we have a server type, then record that. We default to net/rpc
		// for backwards compatibility.
		c.protocol = ProtocolNetRPC
		if len(parts) >= 5 {
			c.protocol = Protocol(parts[4])
		}

		found := false
		for _, p := range c.config.AllowedProtocols {
			if p == c.protocol {
				found = true
				break
			}
		}
		if !found {
			err = fmt.Errorf("Unsupported plugin protocol %q. Supported: %v",
				c.protocol, c.config.AllowedProtocols)
			return
		}

	}

	c.address = addr
	return
}

// ReattachConfig returns the information that must be provided to NewClient
// to reattach to the plugin process that this client started. This is
// useful for plugins that detach from their parent process.
//
// If this returns nil then the process hasn't been started yet. Please
// call Start or Client before calling this.
func (c *Client) ReattachConfig() *ReattachConfig {
	c.l.Lock()
	defer c.l.Unlock()

	if c.address == nil {
		return nil
	}

	if c.config.Cmd != nil && c.config.Cmd.Process == nil {
		return nil
	}

	// If we connected via reattach, just return the information as-is
	if c.config.Reattach != nil {
		return c.config.Reattach
	}

	return &ReattachConfig{
		Protocol: c.protocol,
		Addr:     c.address,
		Pid:      c.config.Cmd.Process.Pid,
	}
}

// Protocol returns the protocol of server on the remote end. This will
// start the plugin process if it isn't already started. Errors from
// starting the plugin are surpressed and ProtocolInvalid is returned. It
// is recommended you call Start explicitly before calling Protocol to ensure
// no errors occur.
func (c *Client) Protocol() Protocol {
	_, err := c.Start()
	if err != nil {
		return ProtocolInvalid
	}

	return c.protocol
}

// dialer is compatible with grpc.WithDialer and creates the connection
// to the plugin.
func (c *Client) dialer(_ string, timeout time.Duration) (net.Conn, error) {
	// Connect to the client
	conn, err := net.Dial(c.address.Network(), c.address.String())
	if err != nil {
		return nil, err
	}
	if tcpConn, ok := conn.(*net.TCPConn); ok {
		// Make sure to set keep alive so that the connection doesn't die
		tcpConn.SetKeepAlive(true)
	}

	// If we have a TLS config we wrap our connection. We only do this
	// for net/rpc since gRPC uses its own mechanism for TLS.
	if c.protocol == ProtocolNetRPC && c.config.TLSConfig != nil {
		conn = tls.Client(conn, c.config.TLSConfig)
	}

	return conn, nil
}

func (c *Client) logStderr(r io.Reader) {
	bufR := bufio.NewReader(r)
	for {
		line, err := bufR.ReadString('\n')
		if line != "" {
			c.config.Stderr.Write([]byte(line))
			line = strings.TrimRightFunc(line, unicode.IsSpace)

			l := c.logger.Named(filepath.Base(c.config.Cmd.Path))

			entry, err := parseJSON(line)
			// If output is not JSON format, print directly to Debug
			if err != nil {
				l.Debug(line)
			} else {
				out := flattenKVPairs(entry.KVPairs)

				l = l.With("timestamp", entry.Timestamp.Format(hclog.TimeFormat))
				switch hclog.LevelFromString(entry.Level) {
				case hclog.Trace:
					l.Trace(entry.Message, out...)
				case hclog.Debug:
					l.Debug(entry.Message, out...)
				case hclog.Info:
					l.Info(entry.Message, out...)
				case hclog.Warn:
					l.Warn(entry.Message, out...)
				case hclog.Error:
					l.Error(entry.Message, out...)
				}
			}
		}

		if err == io.EOF {
			break
		}
	}

	// Flag that we've completed logging for others
	close(c.doneLogging)
}