Like Prometheus, but for logs.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
loki/pkg/dataobj/section_reader.go

87 lines
2.4 KiB

refactor(dataobj): invert dependency between dataobj and sections (#17762) Originally, the dataobj package was a higher-level API around sections. This design caused it to become a bottleneck: * Implementing any new public behaviour for a section required bubbling it up to the dataobj API for it to be exposed, making it tedious to add new sections or update existing ones. * The `dataobj.Builder` pattern was focused on constructing dataobjs for storing log data, which will cause friction as we build objects around other use cases. This PR builds on top of the foundation laid out by #17704 and #17708, fully inverting the dependency between dataobj and sections: * The `dataobj` package has no knowledge of what sections exist, and can now be used for writing and reading generic sections. Section packages now create higher-level APIs around the abstractions provided by `dataobj`. * Section packages are now public, and callers interact directly with these packages for writing and reading section-specific data. * All logic for a section (encoding, decoding, buffering, reading) is now fully self-contained inside the section package. Previously, the implementation of each section was spread across three packages (`pkg/dataobj/internal/encoding`, `pkg/dataobj/internal/sections/SECTION`, `pkg/dataobj`). * Cutting a section is now a decision made by the caller rather than the section implementation. Previously, the logs section builder would create multiple sections. For the most part, this change is a no-op, with two exceptions: 1. Section cutting is now performed by the caller; however, this shouldn't result in any issues. 2. Removing the high-level `dataobj.Stream` and `dataobj.Record` types will temporarily reduce the allocation gains from #16988. I will address this after this PR is merged.
7 months ago
package dataobj
import (
"context"
"fmt"
"io"
"math"
"github.com/grafana/loki/v3/pkg/dataobj/internal/metadata/filemd"
)
type sectionReader struct {
rr rangeReader // Reader for absolute ranges within the file.
md *filemd.Metadata
sec *filemd.SectionInfo
extensionData []byte
refactor(dataobj): invert dependency between dataobj and sections (#17762) Originally, the dataobj package was a higher-level API around sections. This design caused it to become a bottleneck: * Implementing any new public behaviour for a section required bubbling it up to the dataobj API for it to be exposed, making it tedious to add new sections or update existing ones. * The `dataobj.Builder` pattern was focused on constructing dataobjs for storing log data, which will cause friction as we build objects around other use cases. This PR builds on top of the foundation laid out by #17704 and #17708, fully inverting the dependency between dataobj and sections: * The `dataobj` package has no knowledge of what sections exist, and can now be used for writing and reading generic sections. Section packages now create higher-level APIs around the abstractions provided by `dataobj`. * Section packages are now public, and callers interact directly with these packages for writing and reading section-specific data. * All logic for a section (encoding, decoding, buffering, reading) is now fully self-contained inside the section package. Previously, the implementation of each section was spread across three packages (`pkg/dataobj/internal/encoding`, `pkg/dataobj/internal/sections/SECTION`, `pkg/dataobj`). * Cutting a section is now a decision made by the caller rather than the section implementation. Previously, the logs section builder would create multiple sections. For the most part, this change is a no-op, with two exceptions: 1. Section cutting is now performed by the caller; however, this shouldn't result in any issues. 2. Removing the high-level `dataobj.Stream` and `dataobj.Record` types will temporarily reduce the allocation gains from #16988. I will address this after this PR is merged.
7 months ago
}
func (sr *sectionReader) ExtensionData() []byte { return sr.extensionData }
refactor(dataobj): invert dependency between dataobj and sections (#17762) Originally, the dataobj package was a higher-level API around sections. This design caused it to become a bottleneck: * Implementing any new public behaviour for a section required bubbling it up to the dataobj API for it to be exposed, making it tedious to add new sections or update existing ones. * The `dataobj.Builder` pattern was focused on constructing dataobjs for storing log data, which will cause friction as we build objects around other use cases. This PR builds on top of the foundation laid out by #17704 and #17708, fully inverting the dependency between dataobj and sections: * The `dataobj` package has no knowledge of what sections exist, and can now be used for writing and reading generic sections. Section packages now create higher-level APIs around the abstractions provided by `dataobj`. * Section packages are now public, and callers interact directly with these packages for writing and reading section-specific data. * All logic for a section (encoding, decoding, buffering, reading) is now fully self-contained inside the section package. Previously, the implementation of each section was spread across three packages (`pkg/dataobj/internal/encoding`, `pkg/dataobj/internal/sections/SECTION`, `pkg/dataobj`). * Cutting a section is now a decision made by the caller rather than the section implementation. Previously, the logs section builder would create multiple sections. For the most part, this change is a no-op, with two exceptions: 1. Section cutting is now performed by the caller; however, this shouldn't result in any issues. 2. Removing the high-level `dataobj.Stream` and `dataobj.Record` types will temporarily reduce the allocation gains from #16988. I will address this after this PR is merged.
7 months ago
func (sr *sectionReader) DataRange(ctx context.Context, offset, length int64) (io.ReadCloser, error) {
if offset < 0 || length < 0 {
return nil, fmt.Errorf("parameters must not be negative: offset=%d length=%d", offset, length)
}
region := sr.sec.GetLayout().GetData()
if region == nil {
return nil, fmt.Errorf("section has no data")
} else if region.Offset > math.MaxInt64 {
return nil, fmt.Errorf("section data offset is too large")
} else if region.Length > math.MaxInt64 {
return nil, fmt.Errorf("section data length is too large")
}
refactor(dataobj): invert dependency between dataobj and sections (#17762) Originally, the dataobj package was a higher-level API around sections. This design caused it to become a bottleneck: * Implementing any new public behaviour for a section required bubbling it up to the dataobj API for it to be exposed, making it tedious to add new sections or update existing ones. * The `dataobj.Builder` pattern was focused on constructing dataobjs for storing log data, which will cause friction as we build objects around other use cases. This PR builds on top of the foundation laid out by #17704 and #17708, fully inverting the dependency between dataobj and sections: * The `dataobj` package has no knowledge of what sections exist, and can now be used for writing and reading generic sections. Section packages now create higher-level APIs around the abstractions provided by `dataobj`. * Section packages are now public, and callers interact directly with these packages for writing and reading section-specific data. * All logic for a section (encoding, decoding, buffering, reading) is now fully self-contained inside the section package. Previously, the implementation of each section was spread across three packages (`pkg/dataobj/internal/encoding`, `pkg/dataobj/internal/sections/SECTION`, `pkg/dataobj`). * Cutting a section is now a decision made by the caller rather than the section implementation. Previously, the logs section builder would create multiple sections. For the most part, this change is a no-op, with two exceptions: 1. Section cutting is now performed by the caller; however, this shouldn't result in any issues. 2. Removing the high-level `dataobj.Stream` and `dataobj.Record` types will temporarily reduce the allocation gains from #16988. I will address this after this PR is merged.
7 months ago
// Validate bounds within the range of the section.
var (
start = offset
end = offset + length - 1
)
if start > int64(region.Length) || end > int64(region.Length) {
return nil, fmt.Errorf("section data is invalid: start=%d end=%d length=%d", start, end, region.Length)
refactor(dataobj): invert dependency between dataobj and sections (#17762) Originally, the dataobj package was a higher-level API around sections. This design caused it to become a bottleneck: * Implementing any new public behaviour for a section required bubbling it up to the dataobj API for it to be exposed, making it tedious to add new sections or update existing ones. * The `dataobj.Builder` pattern was focused on constructing dataobjs for storing log data, which will cause friction as we build objects around other use cases. This PR builds on top of the foundation laid out by #17704 and #17708, fully inverting the dependency between dataobj and sections: * The `dataobj` package has no knowledge of what sections exist, and can now be used for writing and reading generic sections. Section packages now create higher-level APIs around the abstractions provided by `dataobj`. * Section packages are now public, and callers interact directly with these packages for writing and reading section-specific data. * All logic for a section (encoding, decoding, buffering, reading) is now fully self-contained inside the section package. Previously, the implementation of each section was spread across three packages (`pkg/dataobj/internal/encoding`, `pkg/dataobj/internal/sections/SECTION`, `pkg/dataobj`). * Cutting a section is now a decision made by the caller rather than the section implementation. Previously, the logs section builder would create multiple sections. For the most part, this change is a no-op, with two exceptions: 1. Section cutting is now performed by the caller; however, this shouldn't result in any issues. 2. Removing the high-level `dataobj.Stream` and `dataobj.Record` types will temporarily reduce the allocation gains from #16988. I will address this after this PR is merged.
7 months ago
}
absoluteOffset := int64(region.Offset) + offset
refactor(dataobj): invert dependency between dataobj and sections (#17762) Originally, the dataobj package was a higher-level API around sections. This design caused it to become a bottleneck: * Implementing any new public behaviour for a section required bubbling it up to the dataobj API for it to be exposed, making it tedious to add new sections or update existing ones. * The `dataobj.Builder` pattern was focused on constructing dataobjs for storing log data, which will cause friction as we build objects around other use cases. This PR builds on top of the foundation laid out by #17704 and #17708, fully inverting the dependency between dataobj and sections: * The `dataobj` package has no knowledge of what sections exist, and can now be used for writing and reading generic sections. Section packages now create higher-level APIs around the abstractions provided by `dataobj`. * Section packages are now public, and callers interact directly with these packages for writing and reading section-specific data. * All logic for a section (encoding, decoding, buffering, reading) is now fully self-contained inside the section package. Previously, the implementation of each section was spread across three packages (`pkg/dataobj/internal/encoding`, `pkg/dataobj/internal/sections/SECTION`, `pkg/dataobj`). * Cutting a section is now a decision made by the caller rather than the section implementation. Previously, the logs section builder would create multiple sections. For the most part, this change is a no-op, with two exceptions: 1. Section cutting is now performed by the caller; however, this shouldn't result in any issues. 2. Removing the high-level `dataobj.Stream` and `dataobj.Record` types will temporarily reduce the allocation gains from #16988. I will address this after this PR is merged.
7 months ago
return sr.rr.ReadRange(ctx, absoluteOffset, length)
}
func (sr *sectionReader) MetadataRange(ctx context.Context, offset, length int64) (io.ReadCloser, error) {
if offset < 0 || length < 0 {
return nil, fmt.Errorf("parameters must not be negative: offset=%d length=%d", offset, length)
}
metadataRegion := sr.sec.GetLayout().GetMetadata()
if metadataRegion == nil {
return nil, fmt.Errorf("section has no metadata")
refactor(dataobj): invert dependency between dataobj and sections (#17762) Originally, the dataobj package was a higher-level API around sections. This design caused it to become a bottleneck: * Implementing any new public behaviour for a section required bubbling it up to the dataobj API for it to be exposed, making it tedious to add new sections or update existing ones. * The `dataobj.Builder` pattern was focused on constructing dataobjs for storing log data, which will cause friction as we build objects around other use cases. This PR builds on top of the foundation laid out by #17704 and #17708, fully inverting the dependency between dataobj and sections: * The `dataobj` package has no knowledge of what sections exist, and can now be used for writing and reading generic sections. Section packages now create higher-level APIs around the abstractions provided by `dataobj`. * Section packages are now public, and callers interact directly with these packages for writing and reading section-specific data. * All logic for a section (encoding, decoding, buffering, reading) is now fully self-contained inside the section package. Previously, the implementation of each section was spread across three packages (`pkg/dataobj/internal/encoding`, `pkg/dataobj/internal/sections/SECTION`, `pkg/dataobj`). * Cutting a section is now a decision made by the caller rather than the section implementation. Previously, the logs section builder would create multiple sections. For the most part, this change is a no-op, with two exceptions: 1. Section cutting is now performed by the caller; however, this shouldn't result in any issues. 2. Removing the high-level `dataobj.Stream` and `dataobj.Record` types will temporarily reduce the allocation gains from #16988. I will address this after this PR is merged.
7 months ago
}
// Validate bounds within the range of the section.
var (
start = offset
end = offset + length - 1
)
if start > int64(metadataRegion.Length) || end > int64(metadataRegion.Length) {
return nil, fmt.Errorf("section data is invalid: start=%d end=%d length=%d", start, end, metadataRegion.Length)
}
absoluteOffset := int64(metadataRegion.Offset) + offset
return sr.rr.ReadRange(ctx, absoluteOffset, length)
}
func (sr *sectionReader) DataSize() int64 {
dataRegion := sr.sec.GetLayout().GetData()
if dataRegion == nil {
return 0
}
return int64(dataRegion.Length)
refactor(dataobj): invert dependency between dataobj and sections (#17762) Originally, the dataobj package was a higher-level API around sections. This design caused it to become a bottleneck: * Implementing any new public behaviour for a section required bubbling it up to the dataobj API for it to be exposed, making it tedious to add new sections or update existing ones. * The `dataobj.Builder` pattern was focused on constructing dataobjs for storing log data, which will cause friction as we build objects around other use cases. This PR builds on top of the foundation laid out by #17704 and #17708, fully inverting the dependency between dataobj and sections: * The `dataobj` package has no knowledge of what sections exist, and can now be used for writing and reading generic sections. Section packages now create higher-level APIs around the abstractions provided by `dataobj`. * Section packages are now public, and callers interact directly with these packages for writing and reading section-specific data. * All logic for a section (encoding, decoding, buffering, reading) is now fully self-contained inside the section package. Previously, the implementation of each section was spread across three packages (`pkg/dataobj/internal/encoding`, `pkg/dataobj/internal/sections/SECTION`, `pkg/dataobj`). * Cutting a section is now a decision made by the caller rather than the section implementation. Previously, the logs section builder would create multiple sections. For the most part, this change is a no-op, with two exceptions: 1. Section cutting is now performed by the caller; however, this shouldn't result in any issues. 2. Removing the high-level `dataobj.Stream` and `dataobj.Record` types will temporarily reduce the allocation gains from #16988. I will address this after this PR is merged.
7 months ago
}
func (sr *sectionReader) MetadataSize() int64 {
metadataRegion := sr.sec.GetLayout().GetMetadata()
if metadataRegion == nil {
return 0
refactor(dataobj): invert dependency between dataobj and sections (#17762) Originally, the dataobj package was a higher-level API around sections. This design caused it to become a bottleneck: * Implementing any new public behaviour for a section required bubbling it up to the dataobj API for it to be exposed, making it tedious to add new sections or update existing ones. * The `dataobj.Builder` pattern was focused on constructing dataobjs for storing log data, which will cause friction as we build objects around other use cases. This PR builds on top of the foundation laid out by #17704 and #17708, fully inverting the dependency between dataobj and sections: * The `dataobj` package has no knowledge of what sections exist, and can now be used for writing and reading generic sections. Section packages now create higher-level APIs around the abstractions provided by `dataobj`. * Section packages are now public, and callers interact directly with these packages for writing and reading section-specific data. * All logic for a section (encoding, decoding, buffering, reading) is now fully self-contained inside the section package. Previously, the implementation of each section was spread across three packages (`pkg/dataobj/internal/encoding`, `pkg/dataobj/internal/sections/SECTION`, `pkg/dataobj`). * Cutting a section is now a decision made by the caller rather than the section implementation. Previously, the logs section builder would create multiple sections. For the most part, this change is a no-op, with two exceptions: 1. Section cutting is now performed by the caller; however, this shouldn't result in any issues. 2. Removing the high-level `dataobj.Stream` and `dataobj.Record` types will temporarily reduce the allocation gains from #16988. I will address this after this PR is merged.
7 months ago
}
return int64(metadataRegion.Length)
refactor(dataobj): invert dependency between dataobj and sections (#17762) Originally, the dataobj package was a higher-level API around sections. This design caused it to become a bottleneck: * Implementing any new public behaviour for a section required bubbling it up to the dataobj API for it to be exposed, making it tedious to add new sections or update existing ones. * The `dataobj.Builder` pattern was focused on constructing dataobjs for storing log data, which will cause friction as we build objects around other use cases. This PR builds on top of the foundation laid out by #17704 and #17708, fully inverting the dependency between dataobj and sections: * The `dataobj` package has no knowledge of what sections exist, and can now be used for writing and reading generic sections. Section packages now create higher-level APIs around the abstractions provided by `dataobj`. * Section packages are now public, and callers interact directly with these packages for writing and reading section-specific data. * All logic for a section (encoding, decoding, buffering, reading) is now fully self-contained inside the section package. Previously, the implementation of each section was spread across three packages (`pkg/dataobj/internal/encoding`, `pkg/dataobj/internal/sections/SECTION`, `pkg/dataobj`). * Cutting a section is now a decision made by the caller rather than the section implementation. Previously, the logs section builder would create multiple sections. For the most part, this change is a no-op, with two exceptions: 1. Section cutting is now performed by the caller; however, this shouldn't result in any issues. 2. Removing the high-level `dataobj.Stream` and `dataobj.Record` types will temporarily reduce the allocation gains from #16988. I will address this after this PR is merged.
7 months ago
}