prometheus

Commit Graph

Author	SHA1	Message	Date
Jesus Vazquez	775d90d5f8	TSDB: Rename wal package to wlog (#11352 ) The wlog.WL type can now be used to create a Write Ahead Log or a Write Behind Log. Before the prefix for wbl metrics was 'prometheus_tsdb_out_of_order_wal_' and has been replaced with 'prometheus_tsdb_out_of_order_wbl_'. Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> Signed-off-by: Jesus Vazquez <jesusvazquez@users.noreply.github.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>	3 years ago
Bryan Boreham	d166da7b59	tsdb: stop saving a copy of last 4 samples in memSeries (#11296 ) * TSDB chunks: remove race between writing and reading Because the data is stored as a bit-stream, the last byte in the stream could change if the stream is appended to after an Iterator is obtained. Copy the last byte when the Iterator is created, so we don't have to read it later. Clarify in comments that concurrent Iterator and Appender are allowed, but the chunk must not be modified while an Iterator is created. (This was already the case, in order to copy the bstream slice header.) * TSDB: stop saving last 4 samples in memSeries This extra copy of the last 4 samples was introduced to avoid a race condition between reading the last byte of the chunk and writing to it. But now we have fixed that by having `bstreamReader` copy the last byte, we don't need to copy the last 4 samples. This change saves 56 bytes per series, which is very worthwhile when you have millions or tens of millions of series. * TSDB: tidy up stopIterator re-use Previous changes have left this code duplicating some lines; pull them out to a separate function and tidy up. * TSDB head_test: stop checking when iterators are wrapped The behaviour has changed so chunk iterators are only wrapped when transaction isolation requires them to stop short of the end. This makes tests fail which are checking the type. Tests should check the observable behaviour, not the type. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	3 years ago
Bryan Boreham	ff00dee262	tsdb: turn off transaction isolation for head compaction (#11317 ) * tsdb: add a basic test for read/write isolation * tsdb: store the min time with isolationAppender So that we can see when appending has moved past a certain point in time. * tsdb: allow RangeHead to have isolation disabled This will be used when for head compaction. * tsdb: do head compaction with isolation disabled This saves a lot of work tracking appends done while compaction is ongoing. Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	3 years ago
Bryan Boreham	d0607435a2	tsdb: remove chunkRange and oooCapMax from memSeries (#11288 ) * tsdb: remove chunkRange from memSeries chunkRange is the (oddly-named) configured duration for the head block. We don't need a copy of this value per series. Pass it down where required, and remove the copy. The value in `Head` is only updated in `resetInMemoryState()`, which also discards all `memSeries`. * tsdb: remove oooCapMax from memSeries oooCapMax is the configured maximum capacity for an out-of-order chunk. Storing it per-series uses extra memory, and has surprising behaviour if users change the value in config - series created before the change will keep their old value. Instead, pass it down where required, and remove the per-series value. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	3 years ago
Jesus Vazquez	c1b669bf9b	Add out-of-order sample support to the TSDB (#11075 ) * Introduce out-of-order TSDB support This implementation is based on this design doc: https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing This commit adds support to accept out-of-order ("OOO") sample into the TSDB up to a configurable time allowance. If OOO is enabled, overlapping querying are automatically enabled. Most of the additions have been borrowed from https://github.com/grafana/mimir-prometheus/ Here is the list ist of the original commits cherry picked from mimir-prometheus into this branch: - `4b2198d7ec` - `2836e5513f` - `00b379c3a5` - `ff0dc75758` - `a632c73352` - `c6f3d4ab33` - `5e8406a1d4` - `abde1e0ba1` - `e70e769889` - `df59320886` Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * gofumpt files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add license header to missing files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO tests due to existing chunk disk mapper implementation Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix truncate int overflow Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add Sync method to the WAL and update tests Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * remove useless sync Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Update minOOOTime after truncating Head * Update minOOOTime after truncating Head Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix lint Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Add a unit test Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Load OutOfOrderTimeWindow only once per appender Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO Head LabelValues and PostingsForMatchers Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix replay of OOO mmap chunks Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Remove unnecessary err check Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Prevent panic with ApplyConfig Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run OOO compaction after restart if there is OOO data from WBL Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Apply Bartek's suggestions Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Refactor OOO compaction Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address comments and TODOs - Added a comment explaining why we need the allow overlapping compaction toggle - Clarified TSDBConfig OutOfOrderTimeWindow doc - Added an owner to all the TODOs in the code Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run go format Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix remaining review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix tests Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix TestWBLAndMmapReplay test failure on windows Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address most of the feedback Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Refactor the block meta for out of order Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix windows error Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>	3 years ago
Bryan Boreham	d2701be53a	tsdb: remove chunk pool from memSeries (#11280 ) The chunk pool belongs to the head not to the series. Pass it down where required, and remove the copy of the pointer that `memSeries` was holding. `safeChunk` also needs to hold it, because in scenarios where it is used we don't have a reference to the head. However it was already holding `chunkDiskMapper` for the same reason, so no big change. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	3 years ago
Julien Pivotto	ec6c1f17d1	Update dependencies (#11287 ) Updating dependencies following CI changes and move to go 1.19 Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>	3 years ago
Łukasz Mierzwa	3196c98bc2	Reduce memSeries memory usage by decoupling metadata (#11152 ) Metadata was added recently but doesn't seem to be used much, at least as far as I could identify. Yet it's part of memSeries struct and so even when empty takes 48 bytes, which is a lot given that without it memSeries requires 224 bytes. This change turns it into a pointer on the struct, that get set only when metadata is actually set of given series. Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com> Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>	3 years ago
Paschalis Tsilias	d1122e0743	Introduce TSDB changes for appending metadata to the WAL (#10972 ) * Append metadata to the WAL Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove extra whitespace; Reword some docstrings and comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use RLock() for hasNewMetadata check Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use single byte for metric type in RefMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update proposed WAL format for single-byte type metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implementa MetadataAppender interface for the Agent Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of review comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Amend description of metadata in wal.md Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Correct key used to retrieve metadata from cache When we're setting metadata entries in the scrapeCace, we're using the p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and use it as the cache key. When checking for cache entries though, we used p.Series() as the key, which included the metric name _with_ its labels. That meant that we were never actually hitting the cache. We're fixing this by utiling the __name__ internal label for correctly getting the cache entries after they've been set by setHelp(), setType() or setUnit(). Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Put feature behind a feature flag Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix AppendMetadata docstring Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reorder WAL format document Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse temporary buffer in Metadata encoder Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Only keep latest metadata for each refID during checkpointing Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test that's referencing decoding metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Avoid creating metadata block if no new metadata are present Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for corrupt metadata block and relevant record type Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix CR comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Extract logic about changing metadata in an anonymous function Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implement new proposed WAL format and amend relevant tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use 'const' for metadata field names Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Apply metadata to head memSeries in Commit, not in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add docstring and rename extracted helper in scrape.go Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for tsdb-related cases Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol1 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol2 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix Windows test by closing WAL reader files Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use switch instead of two if statements in metadata decoding Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments around TestMetadata* tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add code for replaying WAL; test correctness of in-memory data after a replay Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove scrape-loop related code from PR Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify tests by sorting slices before comparison Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test to use separate transactions Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Empty out buffer and record slices after encoding latest metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linting issue Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update calculation for DroppedMetadata metric Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse buffer when encoding latest metadata for each series Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments; Check all returned error values using two helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify use of helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Satisfy linter Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>	3 years ago
Xiaochao Dong (@damnever)	6b042da2d8	Fix panic if series is not found when deleting series Signed-off-by: Xiaochao Dong (@damnever) <the.xcdong@gmail.com>	4 years ago
Steve Azzopardi	04fe2c9522	fix(tsdb): inc mmap corruption counter on mmap out of sequence error (#10406 ) What --- When we see out of sequence chunks increase the chunk corruption counter to indicate that one of the chunks was corrupted. Reference: https://github.com/prometheus/prometheus/pull/10406#issuecomment-1142595527 Signed-off-by: Steve Azzopardi <steveazz@outlook.com>	4 years ago
Ganesh Vernekar	4cc25c0cb0	Fix panic on query when m-map replay fails with snapshot enabled (#10348 ) * Fix panic on query when m-map replay fails with snapshot enabled Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix flake Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Ganesh Vernekar	24827782cb	Fix panics when m-mapping head chunks (#10316 ) * Fix panics when m-mapping head chunks Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix reviews Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Mauro Stettler	0df3489275	Write chunks via queue, predicting the refs (#10051 ) * Write chunks via queue, predicting the refs Our load tests have shown that there is a latency spike in the remote write handler whenever the head chunks need to be written, because chunkDiskMapper.WriteChunk() blocks until the chunks are written to disk. This adds a queue to the chunk disk mapper which makes the WriteChunk() method non-blocking unless the queue is full. Reads can still be served from the queue. Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * address PR feeddback Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * initialize metrics without .Add(0) Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * change isRunningMtx to normal lock Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * do not re-initialize chunkrefmap Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * update metric outside of lock scope Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * add benchmark for adding job to chunk write queue Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * remove unnecessary "success" var Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * gofumpt -extra Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * avoid WithLabelValues call in addJob Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * format comments Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * addressing PR feedback Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * rename cutExpectRef to cutAndExpectRef Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * use head.Init() instead of .initTime() Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * address PR feedback Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * PR feedback Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * update test according to PR feedback Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * replace callbackWg -> awaitCb Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * better test of truncation with empty files Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * replace callbackWg -> awaitCb Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>	4 years ago
Ganesh Vernekar	087e3c7360	Fix queries after a failed snapshot replay (#9980 ) (#9986 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Ganesh Vernekar	902817e17f	Fix queries after a failed snapshot replay (#9980 ) (#9987 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Ganesh Vernekar	227d155e3f	Fix queries after a failed snapshot replay (#9980 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Ganesh Vernekar	05d4d97bcd	Fix queries after a failed snapshot replay (#9980 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Nick Pillitteri	084bd70708	Convert atomic Int64 to native type when logging value (#9938 ) The atomic Int64 type wasn't able to be represented when logging via go-kit log and ended up as `"unsupported value type"`. Signed-off-by: Nick Pillitteri <nick.pillitteri@grafana.com>	4 years ago
Darshan Chaudhary	9dcf8b2208	Add the ability to disable tsdb isolation (#9270 ) * Disable isolation in isolation struct Signed-off-by: darshanime <deathbullet@gmail.com> * Run tsdb tests with isolation disabled Signed-off-by: darshanime <deathbullet@gmail.com> * Check for isolation disabled in isoState.Close() Signed-off-by: darshanime <deathbullet@gmail.com> * use t.Skip to skip isolation tests when disabled Signed-off-by: darshanime <deathbullet@gmail.com> * address review comments Signed-off-by: darshanime <deathbullet@gmail.com> * fix test for defaultIsolationState Signed-off-by: darshanime <deathbullet@gmail.com> * Change flag name. Set flag in DB. Do not init txRing. Close isoState. Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Test disabled isolation in CircleCI test_go Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Skip isolation related tests in db_test.go Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Dieter Plaetinck	067efc3725	clarify HeadChunkID type and usage (#9726 ) Signed-off-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>	4 years ago
Dieter Plaetinck	0fac9bb859	Add basic initial developer docs for TSDB (#9451 ) * Add basic initial developer docs for TSDB There's a decent amount of content already out there (blog posts, conference talks, etc), but: * when they get stale, they don't tend to get updated * they still leave me with questions that I'ld like to answer for developers (like me) who want to use, or work with, TSDB What I propose is developer docs inside the prometheus repository. Easy to find and harness the power of the community to expand it and keep it up to date. * perfect is the enemy of good. Let's have a base and incrementally improve * Markdown docs should be broad but not too deep. Source code comments can complement them, and are the ideal place for implementation details. Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * use example code that works out of the box Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * Apply suggestions from code review Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * PR feedback Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * more docs Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * PR feedback Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * Apply suggestions from code review Signed-off-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> * Apply suggestions from code review Signed-off-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> * feedback Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * Update tsdb/docs/usage.md Signed-off-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> * final tweaks Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * workaround docs versioning issue Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * Move example code to real executable, testable example. Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * cleanup example test and make sure it always reproduces Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * obtain temp dir in a way that works with older Go versions Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * Fix Ganesh's comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
beorn7	c954cd9d1d	Move packages out of deprecated pkg directory This creates a new `model` directory and moves all data-model related packages over there: exemplar labels relabel rulefmt textparse timestamp value All the others are more or less utilities and have been moved to `util`: gate logging modetimevfs pool runtime Signed-off-by: beorn7 <beorn@grafana.com>	4 years ago
Dieter Plaetinck	cda025b5b5	TSDB: demistify SeriesRefs and ChunkRefs (#9536 ) * TSDB: demistify seriesRefs and ChunkRefs The TSDB package contains many types of series and chunk references, all shrouded in uint types. Often the same uint value may actually mean one of different types, in non-obvious ways. This PR aims to clarify the code and help navigating to relevant docs, usage, etc much quicker. Concretely: * Use appropriately named types and document their semantics and relations. * Make multiplexing and demuxing of types explicit (on the boundaries between concrete implementations and generic interfaces). * Casting between different types should be free. None of the changes should have any impact on how the code runs. TODO: Implement BlockSeriesRef where appropriate (for a future PR) Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * feedback Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * agent: demistify seriesRefs and ChunkRefs Signed-off-by: Dieter Plaetinck <dieter@grafana.com>	4 years ago
Mateusz Gozdek	1a6c2283a3	Format Go source files using 'gofumpt -w -s -extra' Part of #9557 Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>	4 years ago
Dieter Plaetinck	d5afe0a577	TSDB: Use a dedicated head chunk reference type (#9501 ) * Use dedicated Ref type Throughout the code base, there are reference types masked as regular integers. Let's use dedicated types. They are equivalent, but clearer semantically. This also makes it trivial to find where they are used, and from uses, find the centralized docs. Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * postpone some work until after possible return Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * clarify Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * rename feedback Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * skip header is up to caller Signed-off-by: Dieter Plaetinck <dieter@grafana.com>	4 years ago
Ganesh Vernekar	10bc6e80ee	Fix panic on failed snapshot replay and don't hard fail replay on disabled exemplars (#9438 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Darshan Chaudhary	1f688657bf	Call delete on head if interval overlaps (#9151 ) * Call delete on head if interval overlaps Signed-off-by: darshanime <deathbullet@gmail.com> * Garbage collect tombstones during head gc Signed-off-by: darshanime <deathbullet@gmail.com> * Truncate tombstones before min time during head gc Signed-off-by: darshanime <deathbullet@gmail.com> * Lock less by deleting all keys in a single pass Signed-off-by: darshanime <deathbullet@gmail.com> * Pass map to DeleteTombstones Signed-off-by: darshanime <deathbullet@gmail.com> * Create new slice to replace old one Signed-off-by: darshanime <deathbullet@gmail.com>	4 years ago
Ganesh Vernekar	30534e99d9	Take snapshot only after closing the WAL (#9328 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Bryan Boreham	87d909df4a	Remove symbols map from TSDB head (#9301 ) This saves memory, effort and locking. Since every symbol is also added to postings, `Symbols()` can be implemented there instead. This now has to build a map for deduplication, but `Symbols()` is only called for compaction, and `gc()` used to rebuild the symbols map after every compaction so not an additional cost. Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	4 years ago
Ganesh Vernekar	35b1a82594	Exemplars in snapshot (#9255 ) * Exemplars in snapshot Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix lint Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Add docs Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix lint Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Ganesh Vernekar	f4c63b9008	Fix a data race in the loadWAL function caused by reusing the same error var in multiple goroutines (#9259 ) (#9263 ) Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Callum Styan <callumstyan@gmail.com>	4 years ago
Ganesh Vernekar	8a5d8c15e3	Do not replay checkpoint if it is covered by snapshot (#9226 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Ganesh Vernekar	328a74ca36	Fix bugs and add enhancements to the chunk snapshot (#9185 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Julien Pivotto	cab96a06ef	Merge release 2.29 in main (#9196 ) * PromQL: Fix start and end keywords masking label and metric names This commit fixes an issue with the "at modifier" that introduced two new keywords: `start` and `end`. In grouping options and in metric names, these keywords took precedence over metric or label names, so that those metrics and labels could no longer be referenced. Signed-off-by: Clayton Peters <clayton.peters@man.com> * Add in additional tests for metrics and/or labels called start/end. Signed-off-by: Clayton Peters <clayton.peters@man.com> * : Cut 2.29.0-rc.0 Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com> VERSION: bump to 2.29.0-rc.0 Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com> * Remove experimental wording on size-based retention Followup of #9004 Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu> * Fix PR reference in changelog Signed-off-by: George Brighton <george@gebn.co.uk> * Describe EC2 availability zone IDs at most once per refresh (#9142) Signed-off-by: George Brighton <george@gebn.co.uk> * Describe EC2 availability zones at most once per SD load Closes #9142. Signed-off-by: George Brighton <george@gebn.co.uk> * Incorporate feedback Signed-off-by: George Brighton <george@gebn.co.uk> * Integrate feedback Signed-off-by: George Brighton <george@gebn.co.uk> * Add a compatibility note for macOS users. Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu> * : Cut v2.29.0-rc.1 Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com> Fix `kuma_sd` targetgroup reporting (#9157) * Bundle all xDS targets into a single group Signed-off-by: austin ce <austin.cawley@gmail.com> * : cut v2.29.0-rc.2 Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com> Rename links Signed-off-by: Levi Harrison <git@leviharrison.dev> * bump codemirror-promql to 0.17.0 Signed-off-by: Augustin Husson <husson.augustin@gmail.com> * : cut v2.29.0 Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com> tsdb: align atomically accessed int64 (#9192) This prevents a panic in 32-bit archs: https://pkg.go.dev/sync/atomic#pkg-note-BUG Fixed #9190 Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu> * Release 2.29.1 (#9193) Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu> Co-authored-by: Clayton Peters <clayton.peters@man.com> Co-authored-by: Frederic Branczyk <fbranczyk@gmail.com> Co-authored-by: George Brighton <george@gebn.co.uk> Co-authored-by: Austin Cawley-Edwards <austin.cawley@gmail.com> Co-authored-by: Levi Harrison <git@leviharrison.dev> Co-authored-by: Augustin Husson <husson.augustin@gmail.com>	4 years ago
Julien Pivotto	2d2aba4e8d	tsdb: align atomically accessed int64 (#9192 ) This prevents a panic in 32-bit archs: https://pkg.go.dev/sync/atomic#pkg-note-BUG Fixed #9190 Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>	4 years ago
Bryan Boreham	040ef175eb	Optimise WAL loading by removing extra map and caching min-time (#9160 ) * BenchmarkLoadWAL: close WAL after use So that goroutines are stopped and resources released Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * BenchmarkLoadWAL: make series IDs co-prime with #workers Series are distributed across workers by taking the modulus of the ID with the number of workers, so multiples of 100 are a poor choice. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * BenchmarkLoadWAL: simulate mmapped chunks Real Prometheus cuts chunks every 120 samples, then skips those samples when re-reading the WAL. Simulate this by creating a single mapped chunk for each series, since the max time is all the reader looks at. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Fix comment Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Remove series map from processWALSamples() The locks that is commented to reduce contention in are now sharded 32,000 ways, so won't be contended. Removing the map saves memory and goes just as fast. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * loadWAL: Cache the last mmapped chunk time So we can skip calling append() for samples it will reject. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Improvements from code review Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Full stops and capitals on comments Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Cache max time in both places mmappedChunks is updated Including refactor to extract function `setMMappedChunks`, to reduce code duplication. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Update head min/max time when mmapped chunks added This ensures we have the correct values if no WAL samples are added for that series. Note that `mSeries.maxTime()` was always `math.MinInt64` before, since that function doesn't consider mmapped chunks. Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	4 years ago
Ganesh Vernekar	ee7e0071d1	Snapshot in-memory chunks on shutdown for faster restarts (#7229 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Ganesh Vernekar	848cb5a6d6	Enhanced WAL replay for duplicate series record (#7438 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Ganesh Vernekar	8002a3ab80	Breakdown tsdb/head.go into multiple files (#9147 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Oleg Zaytsev	f9482c5bf6	Clarify computeChunkEndTime's purpose (#9049 ) I was struggling to understand the purpose of this method until I tweaked the tests, so I decided to write down my observations. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>	4 years ago
Oleg Zaytsev	b1ed4a0a66	LabelNames API with matchers (#9083 ) * Push the matchers for LabelNames all the way into the index. NB This doesn't actually implement it in the index, just plumbs it through for now... Signed-off-by: Tom Wilkie <tom@grafana.com> * Hack it up. Does not work. Signed-off-by: Tom Wilkie <tom@grafana.com> * Revert changes I don't understand Can't see why do we need to hold a mutex on symbols, and the purpose of the LabelNamesFor method. Maybe I'll need to re-add this later. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Implement LabelNamesFor This method provides the label names that appear in the postings provided. We do that deeper than the label values because we know beforehand that most of the label names we'll be the same across different postings, and we don't want to go down an up looking up the same symbols for all different series. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Mutex on symbols should be unlocked However, I still don't understand why do we need a mutex here. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Fix head.LabelNamesFor Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Implement mockIndex LabelNames with matchers Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Nitpick on slice initialisation Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Add tests for LabelNamesWithMatchers Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Fix the mutex mess on head.LabelValues/LabelNames I still don't see why we need to grab that unrelated mutex, but at least now we're grabbing it consistently Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Check error after iterating postings Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Use the error from posting when there was en error in postings Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Update storage/interface.go comment Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> * Update tsdb/index/index.go comment Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> * Update tsdb/index/index.go wrapped error msg Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> * Update tsdb/index/index.go wrapped error msg Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> * Update tsdb/index/index.go warpped error msg Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> * Remove unneeded comment Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Add testcases for LabelNames w/matchers in api.go Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Use t.Cleanup() instead of defer in tests Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Tom Wilkie <tom@grafana.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>	4 years ago
Ganesh Vernekar	59d02b5ef0	tsdb: Block Head GC till pending readers are done reading (#9081 ) * tsdb: Block Head GC till pending readers are done reading Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments 2 Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix the exclusiveness of maxt in WaitForPendingReadersInTimeRange Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	4 years ago
Martin Disibio	1bcd13d6b5	Exemplar resize (#8974 ) * Create experimental circular buffer resize method, benchmarks Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Optimize exemplar resize to only replay as many exemplars as needed Signed-off-by: Martin Disibio <mdisibio@gmail.com> * More comments, benchmark AddExemplar Signed-off-by: Martin Disibio <mdisibio@gmail.com> * optimizations Signed-off-by: Martin Disibio <mdisibio@gmail.com> * comment Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Slight refactor of resize benchmark + make use of resize via runtime reloadable storage config. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Some more config related changes. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Refactor to remove usage of noopExemplarStorage and avoid race condition when resizing from Head code. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix or add comments to clarify some of the new behaviour. Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix potential panics related to negative exemplar buffer lengths Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Callum Styan <callumstyan@gmail.com>	4 years ago
ide-rea	14b24d15b0	update checkpoint replay status (#8898 ) * Consider wal checkpoint replay status Signed-off-by: XiaoYu Zhang <ideoutrea@163.com> * Fix tests failed Signed-off-by: XiaoYu Zhang <ideoutrea@163.com> * Update checkpoint replay status Signed-off-by: XiaoYu Zhang <ideoutrea@163.com>	4 years ago
Bryan Boreham	dc8f505595	tsdb: coalesce lock/unlock operations for append (#9061 ) Fetch the low watermark value under the same lock as we need for the appender, rather than releasing then re-aquiring a lock on the same Mutex. Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	5 years ago
Levi Harrison	b5f6f8fb36	Switched to go-kit/log Signed-off-by: Levi Harrison <git@leviharrison.dev>	5 years ago
Levi Harrison	7bc11dcb06	React UI: Add Starting Screen (#8662 ) * Added walreplay API endpoint Signed-off-by: Levi Harrison <git@leviharrison.dev> * Added starting page to react-ui Signed-off-by: Levi Harrison <git@leviharrison.dev> * Documented the new endpoint Signed-off-by: Levi Harrison <git@leviharrison.dev> * Fixed typos Signed-off-by: Levi Harrison <git@leviharrison.dev> Co-authored-by: Julius Volz <julius.volz@gmail.com> * Removed logo Signed-off-by: Levi Harrison <git@leviharrison.dev> * Changed isResponding to isUnexpected Signed-off-by: Levi Harrison <git@leviharrison.dev> * Changed width of progress bar Signed-off-by: Levi Harrison <git@leviharrison.dev> * Changed width of progress bar Signed-off-by: Levi Harrison <git@leviharrison.dev> * Added DB stats object Signed-off-by: Levi Harrison <git@leviharrison.dev> * Updated starting page to work with new fields Signed-off-by: Levi Harrison <git@leviharrison.dev> * Passing nil Signed-off-by: Levi Harrison <git@leviharrison.dev> * Passing nil (pt. 2) Signed-off-by: Levi Harrison <git@leviharrison.dev> * Passing nil (pt. 3) Signed-off-by: Levi Harrison <git@leviharrison.dev> * Passing nil (and also implementing a method this time) (pt. 4) Signed-off-by: Levi Harrison <git@leviharrison.dev> * Passing nil (and also implementing a method this time) (pt. 5) Signed-off-by: Levi Harrison <git@leviharrison.dev> * Changed const to let Signed-off-by: Levi Harrison <git@leviharrison.dev> * Passing nil (pt. 6) Signed-off-by: Levi Harrison <git@leviharrison.dev> * Remove SetStats method Signed-off-by: Levi Harrison <git@leviharrison.dev> * Added comma Signed-off-by: Levi Harrison <git@leviharrison.dev> * Changed api Signed-off-by: Levi Harrison <git@leviharrison.dev> * Changed to triple equals Signed-off-by: Levi Harrison <git@leviharrison.dev> * Fixed data response types Signed-off-by: Levi Harrison <git@leviharrison.dev> * Don't return pointer Signed-off-by: Levi Harrison <git@leviharrison.dev> * Changed version Signed-off-by: Levi Harrison <git@leviharrison.dev> * Fixed interface issue Signed-off-by: Levi Harrison <git@leviharrison.dev> * Fixed pointer Signed-off-by: Levi Harrison <git@leviharrison.dev> * Fixed copying lock value error Signed-off-by: Levi Harrison <git@leviharrison.dev> Co-authored-by: Julius Volz <julius.volz@gmail.com>	5 years ago
Callum Styan	8fd73b1d28	Add Exemplar Remote Write support (#8296 ) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>	5 years ago
Fiona Liao	9b83d8330a	Fix memSafeIterator.Seek() (#8748 ) * Add range query test cases This includes a couple of failing ones that double count some points due to the iterator seek bug. Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com> Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com> * Add Seek() implementation for memSafeIterator Previously, calling memSafeIterator.Seek() would call the Seek() method on its embedded iterator. This was causing the embedded iterator and the memSafeIterator to get out of sync because when the embedded Seek() moved to the next element of the embedded iterator, memSafeIterator didn't "know" about it. memSafeIterator has to "know" when the embedded iterator has moved to be able to work out when it should be reading from its buffer rather than the embedded iterator. Used same logic as for xorIterator.Seek() (which in runtime is used as the embedded iterator) - return false if the iterator has an error and try to move to next element if the required time hasn't been reached, or if no elements have been read yet. The memSafeIterator.Next() method is being called so memSafeIterator.i is always accurate. Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com> * Add tsdb package test Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com> Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com>	5 years ago

1 2 3

137 Commits (775d90d5f87a64f3594c8b911ab2bc65a04f80c1)