Scan recursion is the process of identifying files embedded in other
files and then scanning them, recursively.
Internally this process is more complex than it may sound because a file
may have multiple layers of types before finding a new "file".
At present we treat the recursion count in the scanning context as an
index into both our fmap list AND our container list. These two lists
are conceptually a part of the same thing and should be unified.
But what's concerning is that the "recursion level" isn't actually
incremented or decremented at the same time that we add a layer to the
fmap or container lists but instead is more touchy-feely, increasing
when we find a new "file".
To account for this shadiness, the size of the fmap and container lists
has always been a little longer than our "max scan recursion" limit so
we don't accidentally overflow the fmap or container arrays (!).
I've implemented a single recursion-stack as an array, similar to before,
which includes a pointer to each fmap at each layer, along with the size
and type. Push and pop functions add and remove layers whenever a new
fmap is added. A boolean argument when pushing indicates if the new layer
represents a new buffer or new file (descriptor). A new buffer will reset
the "nested fmap level" (described below).
This commit also provides a solution for an issue where we detect
embedded files more than once during scan recursion.
For illustration, imagine a tarball named foo.tar.gz with this structure:
| description | type | rec level | nested fmap level |
| ------------------------- | ----- | --------- | ----------------- |
| foo.tar.gz | GZ | 0 | 0 |
| └── foo.tar | TAR | 1 | 0 |
| ├── bar.zip | ZIP | 2 | 1 |
| │ └── hola.txt | ASCII | 3 | 0 |
| └── baz.exe | PE | 2 | 1 |
But suppose baz.exe embeds a ZIP archive and a 7Z archive, like this:
| description | type | rec level | nested fmap level |
| ------------------------- | ----- | --------- | ----------------- |
| baz.exe | PE | 0 | 0 |
| ├── sfx.zip | ZIP | 1 | 1 |
| │ └── hello.txt | ASCII | 2 | 0 |
| └── sfx.7z | 7Z | 1 | 1 |
| └── world.txt | ASCII | 2 | 0 |
(A) If we scan for embedded files at any layer, we may detect:
| description | type | rec level | nested fmap level |
| ------------------------- | ----- | --------- | ----------------- |
| foo.tar.gz | GZ | 0 | 0 |
| ├── foo.tar | TAR | 1 | 0 |
| │ ├── bar.zip | ZIP | 2 | 1 |
| │ │ └── hola.txt | ASCII | 3 | 0 |
| │ ├── baz.exe | PE | 2 | 1 |
| │ │ ├── sfx.zip | ZIP | 3 | 1 |
| │ │ │ └── hello.txt | ASCII | 4 | 0 |
| │ │ └── sfx.7z | 7Z | 3 | 1 |
| │ │ └── world.txt | ASCII | 4 | 0 |
| │ ├── sfx.zip | ZIP | 2 | 1 |
| │ │ └── hello.txt | ASCII | 3 | 0 |
| │ └── sfx.7z | 7Z | 2 | 1 |
| │ └── world.txt | ASCII | 3 | 0 |
| ├── sfx.zip | ZIP | 1 | 1 |
| └── sfx.7z | 7Z | 1 | 1 |
(A) is bad because it scans content more than once.
Note that for the GZ layer, it may detect the ZIP and 7Z if the
signature hits on the compressed data, which it might, though
extracting the ZIP and 7Z will likely fail.
The reason the above doesn't happen now is that we restrict embedded
type scans for a bunch of archive formats to include GZ and TAR.
(B) If we scan for embedded files at the foo.tar layer, we may detect:
| description | type | rec level | nested fmap level |
| ------------------------- | ----- | --------- | ----------------- |
| foo.tar.gz | GZ | 0 | 0 |
| └── foo.tar | TAR | 1 | 0 |
| ├── bar.zip | ZIP | 2 | 1 |
| │ └── hola.txt | ASCII | 3 | 0 |
| ├── baz.exe | PE | 2 | 1 |
| ├── sfx.zip | ZIP | 2 | 1 |
| │ └── hello.txt | ASCII | 3 | 0 |
| └── sfx.7z | 7Z | 2 | 1 |
| └── world.txt | ASCII | 3 | 0 |
(B) is almost right. But we can achieve it easily enough only scanning for
embedded content in the current fmap when the "nested fmap level" is 0.
The upside is that it should safely detect all embedded content, even if
it may think the sfz.zip and sfx.7z are in foo.tar instead of in baz.exe.
The biggest risk I can think of affects ZIPs. SFXZIP detection
is identical to ZIP detection, which is why we don't allow SFXZIP to be
detected if insize of a ZIP. If we only allow embedded type scanning at
fmap-layer 0 in each buffer, this will fail to detect the embedded ZIP
if the bar.exe was not compressed in foo.zip and if non-compressed files
extracted from ZIPs aren't extracted as new buffers:
| description | type | rec level | nested fmap level |
| ------------------------- | ----- | --------- | ----------------- |
| foo.zip | ZIP | 0 | 0 |
| └── bar.exe | PE | 1 | 1 |
| └── sfx.zip | ZIP | 2 | 2 |
Provided that we ensure all files extracted from zips are scanned in
new buffers, option (B) should be safe.
(C) If we scan for embedded files at the baz.exe layer, we may detect:
| description | type | rec level | nested fmap level |
| ------------------------- | ----- | --------- | ----------------- |
| foo.tar.gz | GZ | 0 | 0 |
| └── foo.tar | TAR | 1 | 0 |
| ├── bar.zip | ZIP | 2 | 1 |
| │ └── hola.txt | ASCII | 3 | 0 |
| └── baz.exe | PE | 2 | 1 |
| ├── sfx.zip | ZIP | 3 | 1 |
| │ └── hello.txt | ASCII | 4 | 0 |
| └── sfx.7z | 7Z | 3 | 1 |
| └── world.txt | ASCII | 4 | 0 |
(C) is right. But it's harder to achieve. For this example we can get it by
restricting 7ZSFX and ZIPSFX detection only when scanning an executable.
But that may mean losing detection of archives embedded elsewhere.
And we'd have to identify allowable container types for each possible
embedded type, which would be very difficult.
So this commit aims to solve the issue the (B)-way.
Note that in all situations, we still have to scan with file typing
enabled to determine if we need to reassign the current file type, such
as re-identifying a Bzip2 archive as a DMG that happens to be Bzip2-
compressed. Detection of DMG and a handful of other types rely on
finding data partway through or near the ned of a file before
reassigning the entire file as the new type.
Other fixes and considerations in this commit:
- The utf16 HTML parser has weak error handling, particularly with respect
to creating a nested fmap for scanning the ascii decoded file.
This commit cleans up the error handling and wraps the nested scan with
the recursion-stack push()/pop() for correct recursion tracking.
Before this commit, each container layer had a flag to indicate if the
container layer is valid.
We need something similar so that the cli_recursion_stack_get_*()
functions ignore normalized layers. Details...
Imagine an LDB signature for HTML content that specifies a ZIP
container. If the signature actually alerts on the normalized HTML and
you don't ignore normalized layers for the container check, it will
appear as though the alert is in an HTML container rather than a ZIP
container.
This commit accomplishes this with a boolean you set in the scan context
before scanning a new layer. Then when the new fmap is created, it will
use that flag to set similar flag for the layer. The context flag is
reset those that anything after this doesn't have that flag.
The flag allows the new recursion_stack_get() function to ignore
normalized layers when iterating the stack to return a layer at a
requested index, negative or positive.
Scanning normalized extracted/normalized javascript and VBA should also
use the 'layer is normalized' flag.
- This commit also fixes Heuristic.Broken.Executable alert for ELF files
to make sure that:
A) these only alert if cli_append_virus() returns CL_VIRUS (aka it
respects the FP check).
B) all broken-executable alerts for ELF only happen if the
SCAN_HEURISTIC_BROKEN option is enabled.
- This commit also cleans up the error handling in cli_magic_scan_dir().
This was needed so we could correctly apply the layer-is-normalized-flag
to all VBA macros extracted to a directory when scanning the directory.
- Also fix an issue where exceeding scan maximums wouldn't cause embedded
file detection scans to abort. Granted we don't actually want to abort
if max filesize or max recursion depth are exceeded... only if max
scansize, max files, and max scantime are exceeded.
Add 'abort_scan' flag to scan context, to protect against depending on
correct error propagation for fatal conditions. Instead, setting this
flag in the scan context should guarantee that a fatal condition deep in
scan recursion isn't lost which result in more stuff being scanned
instead of aborting. This shouldn't be necessary, but some status codes
like CL_ETIMEOUT never used to be fatal and it's easier to do this than
to verify every parser only returns CL_ETIMEOUT and other "fatal
status codes" in fatal conditions.
- Remove duplicate is_tar() prototype from filestypes.c and include
is_tar.h instead.
- Presently we create the fmap hash when creating the fmap.
This wastes a bit of CPU if the hash is never needed.
Now that we're creating fmap's for all embedded files discovered with
file type recognition scans, this is a much more frequent occurence and
really slows things down.
This commit fixes the issue by only creating fmap hashes as needed.
This should not only resolve the perfomance impact of creating fmap's
for all embedded files, but also should improve performance in general.
- Add allmatch check to the zip parser after the central-header meta
match. That way we don't multiple alerts with the same match except in
allmatch mode. Clean up error handling in the zip parser a tiny bit.
- Fixes to ensure that the scan limits such as scansize, filesize,
recursion depth, # of embedded files, and scantime are always reported
if AlertExceedsMax (--alert-exceeds-max) is enabled.
- Fixed an issue where non-fatal alerts for exceeding scan maximums may
mask signature matches later on. I changed it so these alerts use the
"possibly unwanted" alert-type and thus only alert if no other alerts
were found or if all-match or heuristic-precedence are enabled.
- Added the "Heuristics.Limits.Exceeded.*" events to the JSON metadata
when the --gen-json feature is enabled. These will show up once under
"ParseErrors" the first time a limit is exceeded. In the present
implementation, only one limits-exceeded events will be added, so as to
prevent a malicious or malformed sample from filling the JSON buffer
with millions of events and using a tonne of RAM.
The fmap_duplicate function is used create a new fmap with a view into
an existing fmap. When the new view is a different size than the old
fmap, a new hash must be calculated for the duplicate fmap. However,
when the duplicated fmap is the same size as the original fmap, the hash
will be the same and there's no point recalculating.
The issue is apparent when scanning large EXE files because the hash was
being calculated at the beginning and end of the scan.
Digging into this issue revealed that hash calculations for fmaps were
also being performed at the wrong place. For scans of maps we use
fmap_duplicate() early in the process to apply the name API argument to
the duplicate fmap. Fixing the logic so we doing recalculate the hash
revealed that we never calculated hashes for fmap's created from buffers
in the first place, so that also had to be fixed be relocating where the
hash is calculated.
I also found that fmap_duplicate()'s offset argument used an off_t,
though it and all caller offsets are not allowed to be negative. This
was a bit of tangent to fix a bunch of off_t variables and paramters
that should've been size_t.
Added a couple unit tests to verify that making duplicate fmaps, and
duplicate-duplicate fmaps works as expected after the change.
Changed CLI_ISCONTAINED() and CLI_ISCONTAINED2() macros to cast to
size_t, because pointers and buffer sizes may not be negative, and these
two macros do not rely on substraction.
Reduced the verbosity of a GPT parser warning that occurs frequently
when parsing DMG files prior to DMG file type recognition.
DMG files support a handful of compression formats. File type
recognition for DMG presently works by doing "embedded" file type
recognition during the raw scan after having already identified the file
type by traditional file type magic checks. I found that when DMG uses
bzip2 for compression, we identify an MBR type containing a BZ type, at
which point the raw scan detects it as DMG. The previous commits broke
this by disabling embedded file type recognition for BZ and other
compression & archivie types. Ideally the fix would be to do DMG file
type detection by checking the end of the file; perhaps adding negative
offset support for FTM sigs could fix it. Until we can implement that or
another/better solution for DMG file type detection, we'll have to allow
embedded file type recognition for BZ files.
Also added some comments to narrate the scan process.
This patch adds experimental-quality CMake build tooling.
The libmspack build required a modification to use "" instead of <> for
header #includes. This will hopefully be included in the libmspack
upstream project when adding CMake build tooling to libmspack.
Removed use of libltdl when using CMake.
Flex & Bison are now required to build.
If -DMAINTAINER_MODE, then GPERF is also required, though it currently
doesn't actually do anything. TODO!
I found that the autotools build system was generating the lexer output
but not actually compiling it, instead using previously generated (and
manually renamed) lexer c source. As a consequence, changes to the .l
and .y files weren't making it into the build. To resolve this, I
removed generated flex/bison files and fixed the tooling to use the
freshly generated files. Flex and bison are now required build tools.
On Windows, this adds a dependency on the winflexbison package,
which can be obtained using Chocolatey or may be manually installed.
CMake tooling only has partial support for building with external LLVM
library, and no support for the internal LLVM (to be removed in the
future). I.e. The CMake build currently only supports the bytecode
interpreter.
Many files used include paths relative to the top source directory or
relative to the current project, rather than relative to each build
target. Modern CMake support requires including internal dependency
headers the same way you would external dependency headers (albeit
with "" instead of <>). This meant correcting all header includes to
be relative to the build targets and not relative to the workspace.
For example, ...
```c
include "../libclamav/clamav.h"
include "clamd/clamd_others.h"
```
... becomes:
```c
// libclamav
include "clamav.h"
// clamd
include "clamd_others.h"
```
Fixes header name conflicts by renaming a few of the files.
Converted the "shared" code into a static library, which depends on
libclamav. The ironically named "shared" static library provides
features common to the ClamAV apps which are not required in
libclamav itself and are not intended for use by downstream projects.
This change was required for correct modern CMake practices but was
also required to use the automake "subdir-objects" option.
This eliminates warnings when running autoreconf which, in the next
version of autoconf & automake are likely to break the build.
libclamav used to build in multiple stages where an earlier stage is
a static library containing utils required by the "shared" code.
Linking clamdscan and clamdtop with this libclamav utils static lib
allowed these two apps to function without libclamav. While this is
nice in theory, the practical gains are minimal and it complicates
the build system. As such, the autotools and CMake tooling was
simplified for improved maintainability and this feature was thrown
out. clamdtop and clamdscan now require libclamav to function.
Removed the nopthreads version of the autotools
libclamav_internal_utils static library and added pthread linking to
a couple apps that may have issues building on some platforms without
it, with the intention of removing needless complexity from the
source. Kept the regular version of libclamav_internal_utils.la
though it is no longer used anywhere but in libclamav.
Added an experimental doxygen build option which attempts to build
clamav.h and libfreshclam doxygen html docs.
The CMake build tooling also may build the example program(s), which
isn't a feature in the Autotools build system.
Changed C standard to C90+ due to inline linking issues with socket.h
when linking libfreshclam.so on Linux.
Generate common.rc for win32.
Fix tabs/spaces in shared Makefile.am, and remove vestigial ifndef
from misc.c.
Add CMake files to the automake dist, so users can try the new
CMake tooling w/out having to build from a git clone.
clamonacc changes:
- Renamed FANOTIFY macro to HAVE_SYS_FANOTIFY_H to better match other
similar macros.
- Added a new clamav-clamonacc.service systemd unit file, based on
the work of ChadDevOps & Aaron Brighton.
- Added missing clamonacc man page.
Updates to clamdscan man page, add missing options.
Remove vestigial CL_NOLIBCLAMAV definitions (all apps now use
libclamav).
Rename Windows mspack.dll to libmspack.dll so all ClamAV-built
libraries have the lib-prefix with Visual Studio as with CMake.
Many of the core scanning functions' names no longer represent their
specific purpose or arguments. This commit aims to make the names more
intuitive. Names are now prefixed with "magic" if they involve
file-typing and file-type parsing. In addition, each function now
includes the type of input being scanned whether its "desc", "fmap", or
"buff". Some of the APIs also now specify "type" to indicate that a type
other than "ANY" may be passed in to select the type rather than use
file type magic for type recognition.
| current name | new name |
| ------------------------- | --------------------------------- |
| magic_scandesc() | cli_magic_scan() |
| cli_magic_scandesc_type() | <delete> |
| cli_magic_scandesc() | cli_magic_scan_desc() |
| cli_base_scandesc() | cli_magic_scan_desc_type() |
| cli_partition_scandesc() | <delete> |
| cli_map_scandesc() | magic_scan_nested_fmap_type() |
| cli_map_scan() | cli_magic_scan_nested_fmap_type() |
| cli_mem_scandesc() | cli_magic_scan_buff() |
| cli_scanbuff() | cli_scan_buff() |
| cli_scandesc() | cli_scan_desc() |
| cli_fmap_scandesc() | cli_scan_fmap() |
| cli_scanfile() | cli_magic_scan_file() |
| cli_scandir() | cli_magic_scan_dir() |
| cli_filetype2() | cli_determine_fmap_type() |
| cli_filetype() | cli_compare_ftm_file() |
| cli_partitiontype() | cli_compare_ftm_partition() |
| cli_scanraw() | scanraw() |
A way is needed to record scanned file names for two purposes:
1. File names (and extensions) must be stored in the json metadata
properties recorded when using the --gen-json clamscan option. Future
work may use this to compare file extensions with detected file types.
2. File names are useful when interpretting tmp directory output when
using the --leave-temps option.
This commit enables file name retention for later use by storing file
names in the fmap header structure, if a file name exists.
To store the names in fmaps, an optional name argument has been added to
any internal scan API's that create fmaps and every call to these APIs
has been modified to pass a file name or NULL if a file name is not
required. The zip and gpt parsers required some modification to record
file names. The NSIS and XAR parsers fail to collect file names at all
and will require future work to support file name extraction.
Also:
- Added recursive extraction to the tmp directory when the
--leave-temps option is enabled. When not enabled, the tmp directory
structure remains flat so as to prevent the likelihood of exceeding
MAX_PATH. The current tmp directory is stored in the scan context.
- Made the cli_scanfile() internal API non-static and added it to
scanners.h so it would be accessible outside of scanners.c in order to
remove code duplication within libmspack.c.
- Added function comments to scanners.h and matcher.h
- Converted a TDB-type macros and LSIG-type macros to enums for improved
type safey.
- Converted more return status variables from `int` to `cl_error_t` for
improved type safety, and corrected ooxml file typing functions so
they use `cli_file_t` exclusively rather than mixing types with
`cl_error_t`.
- Restructured the magic_scandesc() function to use goto's for error
handling and removed the early_ret_from_magicscan() macro and
magic_scandesc_cleanup() function. This makes the code easier to
read and made it easier to add the recursive tmp directory cleanup to
magic_scandesc().
- Corrected zip, egg, rar filename extraction issues.
- Removed use of extra sub-directory layer for zip, egg, and rar file
extraction. For Zip, this also involved changing the extracted
filenames to be randomly generated rather than using the "zip.###"
file name scheme.
XLM is a macro language in Excel that was used before VBA (before
1996). It is still parsed and executed by modern Excel and is gaining
popularity with malware authors.
This patch adds rudimentary support for detecting and extracting
Excel 4.0 (XLM) macros.
The code is based on Didier Steven's plugin_biff for oletools.py.
Updated libclamav documentation detailing new scan options structure.
Renamed references to 'algorithmic' detection to 'heuristic' detection. Renaming references to 'properties' to 'collect metadata'.
Renamed references to 'scan all' to 'scan all match'.
Renamed a couple of 'Hueristic.*' signature names as 'Heuristics.*' signatures (plural) to match majority of other heuristics.
micasnyd