As of ClamAV 0.105, libjson-c is required.
There is also no option to disable libjson-c support.
This commit removes the dead code associated with the old build
option.
Primarily this commit fixes an issue with the size of the parameters
passed to cli_checklimits(). The parameters were "unsigned long", which
varies in size depending on platform.
I've switched them to uint64_t / u64.
While working on this, I observed some concerning warnigns on Windows,
and some less serious ones, primarily regarding inconsistencies with
`const` parameters.
Finally, in `scanmem.c`, there is a warning regarding use of `wchar_t *`
with `GetModuleFileNameEx()` instead of `GetModuleFileNameExW()`.
This made me realize this code assumes we're not defining `UNICODE`,
which would have such macros use the 'A' variant.
I have fixed it the best I can, although I'm still a little
uncomfortable with some of this code that uses `char` or `wchar_t`
instead of TCHAR.
I also remove the `if (GetModuleFileNameEx) {` conditional, because this
macro/function will always be defined. The original code was checking a
function pointer, and so this was a bug when integrating into ClamAV.
Regarding the changes to `rijndael.c`, I found that this module assumes
`unsigned long` == 32bits. It does not.
I have corrected it to use `uint32_t`.
Image fuzzy hashing is enabled by default. The following options have
been added to allow users to disable it, if desired.
New clamscan options:
--scan-image[=yes(*)/no]
--scan-image-fuzzy-hash[=yes(*)/no]
New clamd config options:
ScanImage yes(*)/no
ScanImageFuzzyHash yes(*)/no
New libclamav scan options:
options.parse &= ~CL_SCAN_PARSE_IMAGE;
options.parse &= ~CL_SCAN_PARSE_IMAGE_FUZZY_HASH;
This commit also changes scan behavior to disable image fuzzy hashing
for specific types when the DCONF (.cfg) signatures disable those types.
That is, if DCONF disables the PNG parser, it should not only disable
the CVE/format checker for PNG files, but also disable image fuzzy
hashing for PNG files.
Also adds a DCONF option to disable image fuzzy hashing:
OTHER_CONF_IMAGE_FUZZY_HASH
DCONF allows scanning features to be disabled using a configuration
"signature".
The '%f' filename format character has been disabled and will no longer
be replaced with the file name, due to command injection security concerns.
Use the 'CLAM_VIRUSEVENT_FILENAME' environment variable instead.
For the same reason, you should NOT use the environment variables in the
command directly, but should use it carefully from your executed script.
Includes rudimentary support for getting slices from FMap's and for
interacting with libclamav's context structure.
For now will use a Cisco-Talos org fork of the onenote_parser
until the feature to read open a onenote section from a slice (instead
of from a filepath) is added to the upstream.
The clamd and clamav-milter `--help` message and manpages do
not mention the `--pid` (`-p`) option.
The clamd `--help` message and manpage do not mention the
`--datadir` option.
Also corrected minor punctuation issues, and removed the meaningless
jargon about the "main thread" which has nothing to do with the PID.
* Add new clamd and clamscan option --cache-size
This option allows you to set the number of entries the cache can store.
Additionally, introduce CacheSize as a clamd.conf
synonym for --cache-size.
Fixes#867
* Add a new function cl_cvdgetage() to the libclamav API.
This function will retrieve the age of the youngest file in a
database directory, or the age of a single CVD (or CLD) file.
* Add new clamscan option --fail-if-cvd-older-than=days
When passed, causes clamscan to exit with a non-zero return code
if the virus database is older than the specified number of days.
* Add new clamd option --fail-if-cvd-older-than=days
When passed, causes clamd to exit on start-up with a non-zero
return code if the virus database is older than the specified
number of days.
Additionally, we introduce FailIfCvdOlderThan as a clamd.conf
synonym for --fail-if-cvd-older-than.
Fixes#820
If you run clamdscan with the --allmatch option, it will cause all
subsequent clamdscan scans to have all-match mode enabled.
This bug is specific to clamd / clamdscan and does not affect clamscan.
The problem was introduced when we converted the scan options from a
single integer bitfield to a struct. The scan options set by the
clamdscan parameters should be saved in a local copy of the scan
options, but instead it is saving a copy of the pointer to the scan
options struct, and so any changes to the scan options affect future
scans.
* Added loglevel parameter to logg()
* Fix logg and mprintf internals with new loglevels
* Update all logg calls to set loglevel
* Update all mprintf calls to set loglevel
* Fix hidden logg calls
* Executed clam-format
Adds an equivalent functionality to ClamScan's --gen-json option to
ClamD.
Behavior for GenerateMetadataJson is the same as with --gen-json.
If Debug is enabled, it will print out the JSON after each scan.
If LeaveTemporaryFiles is enabled, it will drop a metadat.json file
in the scan temp directory, which of course may be customized using
the TemporaryDirectory option.
To build with code signing, the macOS build must have:
-G Xcode \
-D CLAMAV_SIGN_FILE=ON \
-D CODE_SIGN_IDENTITY="...your codesign ID..." \
-D DEVELOPMENT_TEAM_ID="...your team ID..." \
You can find the codesign ID using:
/usr/bin/env xcrun security find-identity -v -p codesigning
The team ID should also be listed in the identity description.
Also I changed the package name for APPLE to be "clamav" so it doesn't
put "ClamAV <version>" in the PKG PackageInfo like this:
com.cisco.ClamAV 0.104.0.libraries
Instead, it should just be something like:
com.cisco.clamav.libraries
Version is a separate field in that file and shouldn't be in the name.
CMake/CPack is already used to build:
- TGZ source tarball
- WiX-based installer (Windows)
- ZIP install packages (Windows)
This commit adds support for building:
- macOS PKG installer
- DEB package
- RPM package
This should also enable building FreeBSD packages, but while I was able
to build all of the static dependencies using Mussels, CMake/CPack 3.20
doesn't appear to have the the FreeBSD generator despite being in the
documentation.
The package names are will be in this format:
clamav-<version><suffix>.<os>.<arch>.<extension>
This includes changing the Windows .zip and .msi installer names.
E.g.:
- clamav-0.104.0-rc.macos.x86_64.pkg
- clamav-0.104.0-rc.win.win32.msi
- clamav-0.104.0-rc.win.win32.zip
- clamav-0.104.0-rc.win.x64.msi
- clamav-0.104.0-rc.linux.x86_64.deb
- clamav-0.104.0-rc.linux.x86_64.rpm
Notes about building the packages:
I've only tested this with building ClamAV using static dependencies that
I build using the clamav_deps "host-static" recipes from the "clamav"
Mussels cookbook. Eg:
msl build clamav_deps -t host-static
Here's an example configuration to build clam in this way, installing to
/usr/local/clamav:
```sh
cmake .. \
-D CMAKE_FIND_PACKAGE_PREFER_CONFIG=TRUE \
-D CMAKE_PREFIX_PATH=$HOME/.mussels/install/host-static \
-D CMAKE_INSTALL_PREFIX="/usr/local/clamav" \
-D CMAKE_MODULE_PATH=$HOME/.mussels/install/host-static/lib/cmake \
-D CMAKE_BUILD_TYPE=RelWithDebInfo \
-D ENABLE_EXAMPLES=OFF \
-D JSONC_INCLUDE_DIR="$HOME/.mussels/install/host-static/include/json-c" \
-D JSONC_LIBRARY="$HOME/.mussels/install/host-static/lib/libjson-c.a" \
-D ENABLE_JSON_SHARED=OFF \
-D BZIP2_INCLUDE_DIR="$HOME/.mussels/install/host-static/include" \
-D BZIP2_LIBRARY_RELEASE="$HOME/.mussels/install/host-static/lib/libbz2_static.a" \
-D OPENSSL_ROOT_DIR="$HOME/.mussels/install/host-static" \
-D OPENSSL_INCLUDE_DIR="$HOME/.mussels/install/host-static/include" \
-D OPENSSL_CRYPTO_LIBRARY="$HOME/.mussels/install/host-static/lib/libcrypto.a" \
-D OPENSSL_SSL_LIBRARY="$HOME/.mussels/install/host-static/lib/libssl.a" \
-D LIBXML2_INCLUDE_DIR="$HOME/.mussels/install/host-static/include/libxml2" \
-D LIBXML2_LIBRARY="$HOME/.mussels/install/host-static/lib/libxml2.a" \
-D PCRE2_INCLUDE_DIR="$HOME/.mussels/install/host-static/include" \
-D PCRE2_LIBRARY="$HOME/.mussels/install/host-static/lib/libpcre2-8.a" \
-D CURSES_INCLUDE_DIR="$HOME/.mussels/install/host-static/include" \
-D CURSES_LIBRARY="$HOME/.mussels/install/host-static/lib/libncurses.a" \
-D ZLIB_INCLUDE_DIR="$HOME/.mussels/install/host-static/include" \
-D ZLIB_LIBRARY="$HOME/.mussels/install/host-static/lib/libz.a" \
-D LIBCHECK_INCLUDE_DIR="$HOME/.mussels/install/host-static/include" \
-D LIBCHECK_LIBRARY="$HOME/.mussels/install/host-static/lib/libcheck.a"
```
Set CPACK_PACKAGING_INSTALL_PREFIX to customize the resulting package's
install location. This can be different than the install prefix. E.g.:
```sh
-D CMAKE_INSTALL_PREFIX="/usr/local/clamav" \
-D CPACK_PACKAGING_INSTALL_PREFIX="/usr/local/clamav" \
```
Then `make` and then one of these, depending on the platform:
```sh
cpack # macOS: productbuild is default
cpack -G DEB # Debian-based
cpack -G RPM # RPM-based
```
On macOS you'll need to `pip3 install markdown` so that the NEWS.md file can
be converted to html so it will render in the installer.
On RPM-based systems, you'll need rpmbuild (install rpm-build)
This commit also fixes an issue where the html manual (if present) was
not correctly added to the Windows (or now other) install packages.
Fix num to hex function for Windows installer guid
Fix win32 cpack build
Fix macOS cpack build
Fixup input output params to be anotated with [in,out], not [in/out].
Note: skipped some other incorrectly annodated [out] params that are
already staged to be fixed in a different PR.
Added feature to start FreshClam & Clamd as Windows services
Special thanks to Gianluigi Tiesi for allowing us to integrate this
feature from ClamWin directly into ClamAV.
Added internal --service-mode option for FreshClam and ClamD
This is used when Windows starts FreshClam or ClamD as a service so
that they will register with the service manager.
Code found in service.c.
clamav-daemon.service requires clamav-daemon.socket but
it is missing from the build and install process.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
CMake is now required to build.
The built-in LLVM is no longer available.
Also removed support for libltdl calls, which is not used in the CMake
builds, was only used when building with Autotools.
TODO: Fix CMake LLVM support & update to work with modern versions.
There are some merits of having the configs in `/etc/clamav` and the databases
in `/var/lib/clamav` to match the way the distros all package it and so these
directories can be mounted volumes if needed.
The DATABASE_DIRECTORY and APP_CONFIG_DIRECTORY variables don't support
absolute paths. This patch changes that.
The named "shared" is confusing, especially now that these features are
built as a static library instead of being directly compiled into the
various applications.
- 192959 Resource leak - In cli_bcomp_compare_check: Leak of
memory or pointers to system resources. Several fail cases
could lead to `buffer` or `tmp_buffer` being leaked
- 192934 Resource leak - In cli_bcomp_normalize_buffer: Leak of
memory or pointers to system resources. `hex_buffer` leaked
under certain conditions
- 185977 Resource leak - In ole2_process_property: Leak of memory
or pointers to system resources. A fail case could lead to
`outstr` and `outstr2` being leaked
- 185941 Resource leak - In header_cb (clamsubmit): Leak of
memory or pointers to system resources. A fail case could lead
to `mem` being leaked
- 185925 Resource leak - In load_oneyara: Leak of memory or
pointers to system resources. Several fail cases could lead
to `newident` being leaked
- 185918 Resource leak - In parsehwp3_docsummary: Leak of memory
or pointers to system resources. Not actually a leak, but
caused by checking for a condition that can’t occur.
- 185915 Resource leak - In parsehwp3_docinfo: Leak of memory or
pointers to system resources. Not actually a leak, but caused
by checking for a condition that can’t occur.
- 147644 Resource leak - In tcpserver: Leak of memory or pointers
to system resources. A fail case could lead to `info` being leaked
- 147642 Resource leak - In onas_ht_add_hierarchy: Leak of memory
or pointers to system resources. Several fail cases could lead
to `hnode` or `elem` memory leaks
Coverity warnings:
- 293628 Uninitialized pointer read - In reload_db: Reads
an uninitialized pointer or its target. A fail case
could lead to `rldata` being used before initialization
- 293627 Uninitialized pointer read - In reload_th: Reads
an uninitialized pointer or its target. A fail case could
lead to `engine` being used before initialization
- 265483 Uninitialized pointer write - In parseEmailFile:
Write to target of an uninitialized pointer. A fail case
could lead `ret` to be dereferenced and written to
- 265482 Resource leak - In parseEmailFile: Leak of memory
or pointers to system resources. A fail case could lead
to `head` being leaked
- 225221 Resource leak - In onas_get_opt_list: Leak of memory
or pointers to system resources. A fail case could lead to
`opt_list` being leaked
- 225181 Resource leak - In onas_ht_rm_hierarchy: Leak of
memory or pointers to system resources. A fail case could
lead to `prntname` being leaked
- 193874 Resource leak - In cli_genfname: Leak of memory
or pointers to system resources. A fail case could lead
to `sanitized_prefix` being leaked
- 225196 Resource leak - In onas_fan_eloop: Leak of memory
or pointers to system resources. A fail cases could lead
to `event_data` being leaked
Also, I added some unresolved comments regarding clamonacc
functionality, and added a version compatibility check that
is shown in the example code in the `fanotify` man page
If you set an ExcludePath regex in clamd.conf and then perform a
ClamDScan scan with --fdpass --multiscan, it will segfault.
The same issue also affects --fdpass --multiscan scans when using
ExcludePath when scanning a patch that doesn't exist.
The issue is that the filepath isn't being passed along for the path
exclusion regex match, resulting in a NULL deref.
This commit also fixes a possible memory leak if by duplicating the path
for the handle_entry() call _after_ the callback() runs, in case ret
isn't CL_SUCCESS and the function exits without every using the entry
structure or free'ing the copied filename.
The above work temporarily caused a test failure in check_clamd and a
valgrind failure in clamd for the nonexistent file test due to a minor
memory leak. This made it apparent that there were a few other nearby
possible memory leaks.
This commit fixes the above plus cleans up the error handling in clamd's
the file tree walk functions.
Adds support to the pcre2 and pthreadw32 Find<Package>.cmake modules for
correctly discovering the debug versions. This change modeled after the
upstream FindBZip2.cmake module.
Also eliminated HAVE_STRUCT_TIMESPEC redefinition warnings in Windows
builds.
In testing on Alpine, I found that most libs were installing to
<prefix>/lib while libclamav installed to <prefix>/lib64. Those who like
multiarch will advocate for lib64, though I only actually noticed it
because clamscan failed to find libclamav.so! Anyways, they should all
install to lib64 by default if that's what how the system is set up.
Using ${CMAKE_INSTALL_FULL_LIBDIR} instead of <prefix>/lib will do that.
The clamd socket path was changed be an absolute path when
adding CTest support. This quietly broke the check_clamd libcheck
program when building with autotools because a relative path was
expected. I failed to notice because the autotools `make check`
doesn't actually care if check_clamd works!
It turns out that a relative path is required because the max length for
a socket path is *very* short.
This commit changes check_clamd and the associated CMake test to also
use a relative path for the clamd socket. Notably it also modifies the
testcase.py framework switch to the cls.path_tmp (generated) directory
before the tests and restore the CWD after the tests so as to ensure
that the socket file is dropped in somewhere in that tmp directory.
Also creates a ZIP for non-Admin (per-user) installs.
WIX requires the license file to have a .txt or .rtf extension so I
added the .txt extension. I've taken the opportunity to migrate the 3rd
party licenses to a COPYING subdirectory and have added licensing
details to the README.md file.
To build the installer, install WIX and simply run `cpack -C Release`
Also removed the explicit --config option from the
clamav-clamonacc.service file because it should not be required and
isn't being generated correctly when using autotools anyways, especially
after changes in this commit.
Enabled the metadata collection feature, scan heuristics, and all-match
mode when fuzzing in the interest of better code coverage.
Also remove deprecated STREAM command.
An ENABLE_TESTS CMake option is provided so that users can disable
testing if they don't want it. Instructions for how to use this
included in the INSTALL.cmake.md file.
If you run `ctest`, each testcase will write out a log file to the
<build>/unit_tests directory.
As with Autotools' make check, the test files are from test/.split
and unit_tests/.split files, but for CMake these are generated at
build time instead of at test time.
On Posix systems, sets the LD_LIBRARY_PATH so that ClamAV-compiled
libraries can be loaded when running tests.
On Windows systems, CTest will identify and collect all library
dependencies and assemble a temporarily install under the
build/unit_tests directory so that the libraries can be loaded when
running tests.
The same feature is used on Windows when using CMake to install to
collect all DLL dependencies so that users don't have to install them
manually afterwards.
Each of the CTest tests are run using a custom wrapper around Python's
unittest framework, which is also responsible for finding and inserting
valgrind into the valgrind tests on Posix systems.
Unlike with Autotools, the CMake CTest Valgrind-tests are enabled by
default, if Valgrind can be found. There's no need to set VG=1.
CTest's memcheck module is NOT supported, because we use Python to
orchestrate our tests.
Added a bunch of Windows compatibility changes to the unit tests.
These were primarily changing / to PATHSEP and making adjustments
to use Win32 C headers and ifdef out the POSIX ones which aren't
available on Windows. Also disabled a bunch of tests on Win32
that don't work on Windows, notably the mmap ones and FD-passing
(i.e. FILEDES) ones.
Add JSON_C_HAVE_INTTYPES_H definition to clamav-config.h to eliminate
warnings on Windows where json.h is included after inttypes.h because
json-c's inttypes replacement relies on it.
This is a it of a hack and may be removed if json-c fixes their
inttypes header stuff in the future.
Add preprocessor definitions on Windows to disable MSVC warnings about
CRT secure and nonstandard functions. While there may be a better
solution, this is needed to be able to see other more serious warnings.
Add missing file comment block and copyright statement for clamsubmit.c.
Also change json-c/json.h include filename to json.h in clamsubmit.c.
The directory name is not required.
Changed the hash table data integer type from long, which is poorly
defined, to size_t -- which is capable of storing a pointer. Fixed a
bunch of casts regarding this variable to eliminate warnings.
Fixed two bugs causing utf8 encoding unit tests to fail on Windows:
- The in_size variable should be the number of bytes, not the character
count. This was was causing the SHIFT_JIS (japanese codepage) to UTF8
transcoding test to only transcode half the bytes.
- It turns out that the MultiByteToWideChar() API can't transcode
UTF16-BE to UTF16-LE. The solution is to just iterate over the buffer
and flip the bytes on each uint16_t. This but was causing the UTF16-BE
to UTF8 tests to fail.
I also split up the utf8 transcoding tests into separate tests so I
could see all of the failures instead of just the first one.
Added a flags parameter to the unit test function to open testfiles
because it turns out that on Windows if a file contains the \r\n it will
replace it with just \n if you opened the file as a text file instead of
as binary. However, if we open the CBC files as binary, then a bunch of
bytecode tests fail. So I've changed the tests to open the CBC files in
the bytecode tests as text files and open all other files as binary.
Ported the feature tests from shell scripts to Python using a modified
version of our QA test-framework, which is largely compatible and will
allow us to migrate some QA tests into this repo. I'd like to add GitHub
Actions pipelines in the future so that all public PR's get some testing
before anyone has to manually review them.
The clamd --log option was missing from the help string, though it
definitely works. I've added it in this commit.
It appears that clamd.c was never clang-format'd, so this commit also
reformats clamd.c.
Some of the check_clamd tests expected the path returned by clamd to
match character for character with original path sent to clamd. However,
as we now evaluate real paths before a scan, the path returned by clamd
isn't going to match the relative (and possibly symlink-ridden) path
passed to clamdscan. I fixed this test by changing the test to search
for the basename: <signature> FOUND within the response instead of
matching the exact path.
Autotools: Link check_clamd with libclamav so we can use our utility
functions in check_clamd.c.
VirusEvent commands may use %v to get the signature name (virus name)
for the alert but do not have a format option to get the file name.
This commit adds %f to get the file name.
The VirusEvent feature does provide two environment variables,
$CLAM_VIRUSEVENT_FILENAME and $CLAM_VIRUSEVENT_VIRUSNAME which provide
file and virus names, but they weren't documented in the sample configs.
This commit also adds these environment variables to the sample configs.
The clamd TOCTOU access check fix introduced and expectation that the
scanfile API will set errno if access was denied. We should instead use
the cl_error_t error code enum.
Also added Duane Waddle to the 0.104 contributors acknowledgements.
Clamd presently uses an access() check prior to a scan to see if the
process has permission to open the file. This is problematic for two
reasons.
1. There's a time-of-check/time-of-use issue with checking access
before accessing because the permissions could change in between.
2. The POSIX CAP_DAC_READ_SEARCH feature won't work with access().
CAP_DAC_READ_SEARCH is a posix capability that allows the kernel to
bless a process, saying "You can read any file just like you were root."
The service manager can run clamd and bless it at run time with
CAP_DAC_READ_SEARCH such that fd-passing is not required for clamd to
read files it would otherwise not have permission to access.
The StandardOutput option for systemd has been deprecated and results in
the following warning messages in systemd version: systemd 246.3-1:
usr/lib/systemd/system/clamav-freshclam.service:13: Standard output
type syslog is obsolete, automatically updating to journal. Please
update your unit file, and consider removing the setting altogether.
/usr/lib/systemd/system/clamav-daemon.service:13: Standard output
type syslog is obsolete, automatically updating to journal. Please
update your unit file, and consider removing the setting altogether.
This commit removes the option for the freshclam and clamd service
files.
Signed-off-by: Sven Rueß <github@sritd.de>
Added a new scan option to alert on broken media (graphics) file
formats. This feature mitigates the risk of malformed media files
intended to exploit vulnerabilities in other software. At present
media validation exists for JPEG, TIFF, PNG, and GIF files.
To enable this feature, set `AlertBrokenMedia yes` in clamd.conf, or
use the `--alert-broken-media` option when using `clamscan`.
These options are disabled by default for now.
Application developers may enable this scan option by enabling
`CL_SCAN_HEURISTIC_BROKEN_MEDIA` for the `heuristic` scan option bit
field.
Fixed PNG parser logic bugs that caused an excess of parsing errors
and fixed a stack exhaustion issue affecting some systems when
scanning PNG files. PNG file type detection was disabled via
signature database update for 0.103.0 to mitigate effects from these
bugs.
Fixed an issue where PNG and GIF files no longer work with Target:5
(graphics) signatures if detected as CL_TYPE_PNG/GIF rather than as
CL_TYPE_GRAPHICS. Target types now support up to 10 possible file
types to make way for additional graphics types in future releases.
Scanning JPEG, TIFF, PNG, and GIF files will no longer return "parse"
errors when file format validation fails. Instead, the scan will alert
with the "Heuristics.Broken.Media" signature prefix and a descriptive
suffix to indicate the issue, provided that the "alert broken media"
feature is enabled.
GIF format validation will no longer fail if the GIF image is missing
the trailer byte, as this appears to be a relatively common issue in
otherwise functional GIF files.
Added a TIFF dynamic configuration (DCONF) option, which was missing.
This will allow us to disable TIFF format validation via signature
database update in the event that it proves to be problematic.
This feature already exists for many other file types.
Added CL_TYPE_JPEG and CL_TYPE_TIFF types.
This improvement looks up the filename given the file descriptor.
This is supported on Mac and Linux but not presently supported
on other UNIX operating systems. FD-passing is not available on
Windows.
On supported systems, the verdict in the clamd log and the VirusEvent
will show the actual file path instead of something like fd[14].
Users have complained about two specific log events that are extremely
verbose in non-critical error conditions:
- clamonacc reports "ERROR: Can't send to clamd: Bad address"
This may occur when small files are created/destroyed before they can
be sent to be scanned. The log message probably should only be
reported in verbose mode.
- clamonacc reports "ClamMisc: $/proc/XXX vanished before UIDs could be
excluded; scanning anyway"
This may occur when a process that accessed a file exits before
clamonacc find out who accessed the file. This is a fairly frequent
occurence. It can still be problematic if `clamd` was the process which
accessed the file (like a clamd temp file if watching /tmp), generally
it's not an issue and we want to silently scan it anyways.
Also addressed copypaste issue in onas_send_stream() wherein fd is set
to 0 (aka STDIN) if the provided fd == 0 (should've been -1 for invalid
FD) and if filename == NULL. In fact clamonacc never scans STDIN so the
scan should fail if filename == NULL and the provided FD is invalid
(-1).
I also found that "Access denied. ERROR" is easily provoked when using
--fdpass or --stream using this simple script:
for i in {1..5000}; do echo "blah $i" > tmp-$i && rm tmp-$i; done
Clamdscan does not allow for scans to fail quietly because the file does
not exist, but for clamonacc it's a common thing and we don't want to
output an error. To solve this, I changed it so a return length of -1
will still result in an "internal error" message but return len 0
failures will be silently ignored.
I've added a static variable to onas_client_scan() that keeps state in
case clamd is stopped and started - that way it won't print an error
message for every event when offline. Instead it will log an error for
the first connection failure, and log again when the connection is
re-established for a future scan. Calls to onas_client_scan() are
already wrapped with the onas_scan_lock mutex so the static variable
should be safe.
Finally, there were a couple of error responses from clamd that can
occur if the file isn't found which we want to silently ignore, so I've
tweaked the code which checks for specific error messages to account for
these.
Micah Snyder