"Storage is temporarily not available":"Glabātuve īslaicīgi nav pieejama",
"Storage invalid":"Nepareiza glabātuve",
"Unknown error":"Nezināma kļūda",
"Files":"Datnes",
"All files":"Visas datnes",
"Recent":"Nesenās",
"File could not be found":"Datni nevar atrast",
@ -23,9 +22,11 @@ OC.L10N.register(
"Download":"Lejupielādēt",
"Rename":"Pārsaukt",
"Move":"Pārvietot",
"Target folder":"Mērķa mape",
"Delete":"Dzēst",
"Disconnect storage":"Atvienot glabātuvi",
"Unshare":"Pārtraukt koplietošanu",
"Files":"Datnes",
"Details":"Detaļas",
"Select":"Norādīt",
"Pending":"Gaida savu kārtu",
@ -67,7 +68,21 @@ OC.L10N.register(
"New folder":"Jauna mape",
"Upload":"Augšupielādēt",
"An error occurred while trying to update the tags":"Notika kļūda atjaunojot atzīmi",
"Added to favorites":"Pievienot izlasei",
"Removed from favorites":"Noņemt no izlases",
"Created by {user}":"Izveidoja {user}",
"Changed by {user}":"Izmainīja {user}",
"Deleted by {user}":"Dzēsa {user}",
"Restored by {user}":"Atjaunoja {user}",
"Renamed by {user}":"Pārdēvēja {user}",
"Moved by {user}":"Pārvietoja {user}",
"{user} changed {file}":"{user} mainīts {file}",
"You deleted {file}":"Tu izdzēsi {file}",
"You restored {file}":"Tu atjaunoji {file}",
"{user} restored {file}":"{user} atjaunoja {file}",
"{user} renamed {oldfile} to {newfile}":"{user} pārdēvēja {oldfile} uz {newfile}",
"{user} moved {oldfile} to {newfile}":"{user} pārvietoja {oldfile} uz {newfile}",
"A file or folder has been <strong>changed</strong> or <strong>renamed</strong>":"Fails vai mape tika <strong>mainīts</strong> vai <strong>pārsaukts</strong>",
"A new file or folder has been <strong>created</strong>":"<strong>Izveidota</strong> jauna datne vai mape",
"Limit notifications about creation and changes to your <strong>favorite files</strong> <em>(Stream only)</em>":"Limitēt ziņojumus par jūsu <strong>iecienīto datņu</strong> izveidošanu un izmaiņām <em>(tikai datu straumei)</em>",
"Storage is temporarily not available":"Glabātuve īslaicīgi nav pieejama",
"Storage invalid":"Nepareiza glabātuve",
"Unknown error":"Nezināma kļūda",
"Files":"Datnes",
"All files":"Visas datnes",
"Recent":"Nesenās",
"File could not be found":"Datni nevar atrast",
@ -21,9 +20,11 @@
"Download":"Lejupielādēt",
"Rename":"Pārsaukt",
"Move":"Pārvietot",
"Target folder":"Mērķa mape",
"Delete":"Dzēst",
"Disconnect storage":"Atvienot glabātuvi",
"Unshare":"Pārtraukt koplietošanu",
"Files":"Datnes",
"Details":"Detaļas",
"Select":"Norādīt",
"Pending":"Gaida savu kārtu",
@ -65,7 +66,21 @@
"New folder":"Jauna mape",
"Upload":"Augšupielādēt",
"An error occurred while trying to update the tags":"Notika kļūda atjaunojot atzīmi",
"Added to favorites":"Pievienot izlasei",
"Removed from favorites":"Noņemt no izlases",
"Created by {user}":"Izveidoja {user}",
"Changed by {user}":"Izmainīja {user}",
"Deleted by {user}":"Dzēsa {user}",
"Restored by {user}":"Atjaunoja {user}",
"Renamed by {user}":"Pārdēvēja {user}",
"Moved by {user}":"Pārvietoja {user}",
"{user} changed {file}":"{user} mainīts {file}",
"You deleted {file}":"Tu izdzēsi {file}",
"You restored {file}":"Tu atjaunoji {file}",
"{user} restored {file}":"{user} atjaunoja {file}",
"{user} renamed {oldfile} to {newfile}":"{user} pārdēvēja {oldfile} uz {newfile}",
"{user} moved {oldfile} to {newfile}":"{user} pārvietoja {oldfile} uz {newfile}",
"A file or folder has been <strong>changed</strong> or <strong>renamed</strong>":"Fails vai mape tika <strong>mainīts</strong> vai <strong>pārsaukts</strong>",
"A new file or folder has been <strong>created</strong>":"<strong>Izveidota</strong> jauna datne vai mape",
"Limit notifications about creation and changes to your <strong>favorite files</strong> <em>(Stream only)</em>":"Limitēt ziņojumus par jūsu <strong>iecienīto datņu</strong> izveidošanu un izmaiņām <em>(tikai datu straumei)</em>",
"Notify members of the following groups about available updates:":"次のグループのメンバーに対してアップデートのメッセージが表示されます:",
"Only notification for app updates are available.":"アプリ更新情報があるときのみ通知する。",
"The selected update channel makes dedicated notifications for the server obsolete.":"選択した更新チャネルでは、廃止サーバーについて専用の通知を行います。",
"The selected update channel does not support updates of the server.":"選択したチャンネルでは、サーバーのアップデートをサポートしていません。"
"The selected update channel does not support updates of the server.":"選択したチャンネルでは、サーバーのアップデートをサポートしていません。",
"You are running PHP %s. To allow you to upgrade to Nextcloud 11 and higher you need to run at least PHP 5.6. Once you upgraded your PHP version you will be able to receive update notifications for these newer versions.":"PHP %s が動いています。Nextcloud 11以上にバージョンアップする場合は、PHP 5.6以上を使う必要があります。PHPのバージョンをアップグレードしたら、新しいバージョンのアップデート通知を受信できるようになります。"
"Notify members of the following groups about available updates:":"次のグループのメンバーに対してアップデートのメッセージが表示されます:",
"Only notification for app updates are available.":"アプリ更新情報があるときのみ通知する。",
"The selected update channel makes dedicated notifications for the server obsolete.":"選択した更新チャネルでは、廃止サーバーについて専用の通知を行います。",
"The selected update channel does not support updates of the server.":"選択したチャンネルでは、サーバーのアップデートをサポートしていません。"
"The selected update channel does not support updates of the server.":"選択したチャンネルでは、サーバーのアップデートをサポートしていません。",
"You are running PHP %s. To allow you to upgrade to Nextcloud 11 and higher you need to run at least PHP 5.6. Once you upgraded your PHP version you will be able to receive update notifications for these newer versions.":"PHP %s が動いています。Nextcloud 11以上にバージョンアップする場合は、PHP 5.6以上を使う必要があります。PHPのバージョンをアップグレードしたら、新しいバージョンのアップデート通知を受信できるようになります。"
"Select object classes":"Sélectionner les classes d'objet",
"Please check the credentials, they seem to be wrong.":"Veuillez vérifier vos informations d'identification",
"Please specify the port, it could not be auto-detected.":"Veuillez spécifier le port, il n'a pu être détecté automatiquement",
"Please specify the port, it could not be auto-detected.":"Veuillez indiquer le port, il n'a pu être détecté automatiquement.",
"Base DN could not be auto-detected, please revise credentials, host and port.":"Le DN de base n'a pu être détecté automatiquement. Vérifiez les informations d'identification, l'hôte et le port.",
"Could not detect Base DN, please enter it manually.":"Impossible de détecter le DN de base, veuillez le spécifier manuellement",
"Could not detect Base DN, please enter it manually.":"Impossible de détecter le DN de base, veuillez le saisir manuellement.",
"{nthServer}. Server":"{nthServer}. Serveur",
"No object found in the given Base DN. Please revise.":"Aucun objet trouvé dans le DN de base spécifié. Veuillez le vérifier.",
"More than 1,000 directory entries available.":"Il y a plus de 1 000 entrées de répertoire disponibles.",
@ -89,7 +89,7 @@ OC.L10N.register(
"Password":"Mot de passe",
"For anonymous access, leave DN and Password empty.":"Pour un accès anonyme, laisser le DN utilisateur et le mot de passe vides.",
"One Base DN per line":"Un DN de base par ligne",
"You can specify Base DN for users and groups in the Advanced tab":"Vous pouvez spécifier les DN de base de vos utilisateurs et groupes via l'onglet Avancé",
"You can specify Base DN for users and groups in the Advanced tab":"Vous pouvez indiquer le DN de base de vos utilisateurs et groupes via l'onglet Avancé",
"Detect Base DN":"Détecter le DN de base",
"Test Base DN":"Tester le DN de base",
"Avoids automatic LDAP requests. Better for bigger setups, but requires some LDAP knowledge.":"Évite les requêtes LDAP automatiques. Mieux pour les installations de grande ampleur, mais demande des connaissances en LDAP.",
"Select object classes":"Sélectionner les classes d'objet",
"Please check the credentials, they seem to be wrong.":"Veuillez vérifier vos informations d'identification",
"Please specify the port, it could not be auto-detected.":"Veuillez spécifier le port, il n'a pu être détecté automatiquement",
"Please specify the port, it could not be auto-detected.":"Veuillez indiquer le port, il n'a pu être détecté automatiquement.",
"Base DN could not be auto-detected, please revise credentials, host and port.":"Le DN de base n'a pu être détecté automatiquement. Vérifiez les informations d'identification, l'hôte et le port.",
"Could not detect Base DN, please enter it manually.":"Impossible de détecter le DN de base, veuillez le spécifier manuellement",
"Could not detect Base DN, please enter it manually.":"Impossible de détecter le DN de base, veuillez le saisir manuellement.",
"{nthServer}. Server":"{nthServer}. Serveur",
"No object found in the given Base DN. Please revise.":"Aucun objet trouvé dans le DN de base spécifié. Veuillez le vérifier.",
"More than 1,000 directory entries available.":"Il y a plus de 1 000 entrées de répertoire disponibles.",
@ -87,7 +87,7 @@
"Password":"Mot de passe",
"For anonymous access, leave DN and Password empty.":"Pour un accès anonyme, laisser le DN utilisateur et le mot de passe vides.",
"One Base DN per line":"Un DN de base par ligne",
"You can specify Base DN for users and groups in the Advanced tab":"Vous pouvez spécifier les DN de base de vos utilisateurs et groupes via l'onglet Avancé",
"You can specify Base DN for users and groups in the Advanced tab":"Vous pouvez indiquer le DN de base de vos utilisateurs et groupes via l'onglet Avancé",
"Detect Base DN":"Détecter le DN de base",
"Test Base DN":"Tester le DN de base",
"Avoids automatic LDAP requests. Better for bigger setups, but requires some LDAP knowledge.":"Évite les requêtes LDAP automatiques. Mieux pour les installations de grande ampleur, mais demande des connaissances en LDAP.",
"The link to reset your password has been sent to your email. If you do not receive it within a reasonable amount of time, check your spam/junk folders.<br>If it is not there ask your local administrator.":"Se ha enviado un enlace para restablecer su contraseña a su correo electrónico. Si usted no lo recibe en un tiempo razonable, revise su carpeta de spam/chatarra/basura.<br>Si no lo encuentra, consulte a su administrador local.",
"Your files are encrypted. There will be no way to get your data back after your password is reset.<br />If you are not sure what to do, please contact your administrator before you continue. <br />Do you really want to continue?":"Sus archivos han sido cifrados. No habrá forma de recuperar sus datos tras resetear la contraseña.<br /> Si no está seguro de qué hacer, contacte con su administrador antes de continuar. ¿Está seguro de qué quiere continuar?",
"I know what I'm doing":"Sé lo que estoy haciendo",
"Password can not be changed. Please contact your administrator.":"La contraseña no se puede cambiar. Por favor, contacte a su administrador.",
"The link to reset your password has been sent to your email. If you do not receive it within a reasonable amount of time, check your spam/junk folders.<br>If it is not there ask your local administrator.":"Se ha enviado un enlace para restablecer su contraseña a su correo electrónico. Si usted no lo recibe en un tiempo razonable, revise su carpeta de spam/chatarra/basura.<br>Si no lo encuentra, consulte a su administrador local.",
"Your files are encrypted. There will be no way to get your data back after your password is reset.<br />If you are not sure what to do, please contact your administrator before you continue. <br />Do you really want to continue?":"Sus archivos han sido cifrados. No habrá forma de recuperar sus datos tras resetear la contraseña.<br /> Si no está seguro de qué hacer, contacte con su administrador antes de continuar. ¿Está seguro de qué quiere continuar?",
"I know what I'm doing":"Sé lo que estoy haciendo",
"Password can not be changed. Please contact your administrator.":"La contraseña no se puede cambiar. Por favor, contacte a su administrador.",
"Oracle username and/or password not valid":"Nom d'utilisateur et/ou mot de passe de la base Oracle non valide(s)",
"DB Error: \"%s\"":"Erreur de la base de données : \"%s\"",
"Offending command was: \"%s\"":"La requête en cause est : \"%s\"",
"You need to enter either an existing account or the administrator.":"Vous devez spécifier le nom d'un compte existant, ou celui de l'administrateur.",
"You need to enter either an existing account or the administrator.":"Vous devez indiquer un compte existant ou celui de l'administrateur.",
"Offending command was: \"%s\", name: %s, password: %s":"La requête en cause est : \"%s\", nom : %s, mot de passe : %s",
"PostgreSQL username and/or password not valid":"Nom d'utilisateur et/ou mot de passe de la base PostgreSQL non valide(s)",
"Mac OS X is not supported and %s will not work properly on this platform. Use it at your own risk! ":"Mac OS X n'est pas pris en charge et %s ne fonctionnera pas correctement sur cette plate-forme. Son utilisation est à vos risques et périls !",
"Oracle username and/or password not valid":"Nom d'utilisateur et/ou mot de passe de la base Oracle non valide(s)",
"DB Error: \"%s\"":"Erreur de la base de données : \"%s\"",
"Offending command was: \"%s\"":"La requête en cause est : \"%s\"",
"You need to enter either an existing account or the administrator.":"Vous devez spécifier le nom d'un compte existant, ou celui de l'administrateur.",
"You need to enter either an existing account or the administrator.":"Vous devez indiquer un compte existant ou celui de l'administrateur.",
"Offending command was: \"%s\", name: %s, password: %s":"La requête en cause est : \"%s\", nom : %s, mot de passe : %s",
"PostgreSQL username and/or password not valid":"Nom d'utilisateur et/ou mot de passe de la base PostgreSQL non valide(s)",
"Mac OS X is not supported and %s will not work properly on this platform. Use it at your own risk! ":"Mac OS X n'est pas pris en charge et %s ne fonctionnera pas correctement sur cette plate-forme. Son utilisation est à vos risques et périls !",
"You need to set your user email before being able to send test emails.":"Zunächst muss die Benutzer-E-Mail-Adresse angegeben werden, bevor Test-E-Mails verschickt werden können.",
"Invalid request":"Fehlerhafte Anfrage",
"Invalid mail address":"Ungültige E-Mail-Adresse",
"No valid group selected":"Keine gültige Gruppe ausgewählt",
"A user with that name already exists.":"Ein Benutzer mit diesem Namen existiert bereits.",
"Unable to create user.":"Benutzer konnte nicht erstellt werden.",
"Your %s account was created":"Dein %s-Konto wurde erstellt",
"You need to set your user email before being able to send test emails.":"Zunächst muss die Benutzer-E-Mail-Adresse angegeben werden, bevor Test-E-Mails verschickt werden können.",
"Invalid request":"Fehlerhafte Anfrage",
"Invalid mail address":"Ungültige E-Mail-Adresse",
"No valid group selected":"Keine gültige Gruppe ausgewählt",
"A user with that name already exists.":"Ein Benutzer mit diesem Namen existiert bereits.",
"Unable to create user.":"Benutzer konnte nicht erstellt werden.",
"Your %s account was created":"Dein %s-Konto wurde erstellt",
"You need to set your user email before being able to send test emails.":"Sie müssen Ihre Benutzer-E-Mail-Adresse einstellen, bevor Sie Test-E-Mails versenden können.",
"Invalid request":"Ungültige Anforderung",
"Invalid mail address":"Ungültige E-Mail-Adresse",
"No valid group selected":"Keine gültige Gruppe ausgewählt",
"A user with that name already exists.":"Ein Benutzer mit diesem Namen existiert bereits.",
"Unable to create user.":"Benutzer konnte nicht erstellt werden.",
"Your %s account was created":"Ihr %s-Konto wurde erstellt",
"You need to set your user email before being able to send test emails.":"Sie müssen Ihre Benutzer-E-Mail-Adresse einstellen, bevor Sie Test-E-Mails versenden können.",
"Invalid request":"Ungültige Anforderung",
"Invalid mail address":"Ungültige E-Mail-Adresse",
"No valid group selected":"Keine gültige Gruppe ausgewählt",
"A user with that name already exists.":"Ein Benutzer mit diesem Namen existiert bereits.",
"Unable to create user.":"Benutzer konnte nicht erstellt werden.",
"Your %s account was created":"Ihr %s-Konto wurde erstellt",
"You need to set your user email before being able to send test emails.":"Tiene que configurar su dirección de correo electrónico antes de poder enviar mensajes de prueba.",
"Invalid request":"Petición no válida",
"Invalid mail address":"Dirección de correo inválida",
"No valid group selected":"No se ha seleccionado un grupo válido",
"A user with that name already exists.":"Ya existe un usuario con ese nombre.",
"Unable to create user.":"No se pudo crear el usuario.",
"Your %s account was created":"Se ha creado su cuenta de %s",
@ -122,6 +123,8 @@ OC.L10N.register(
"undo":"deshacer",
"never":"nunca",
"deleted {userName}":"borrado {userName}",
"Unable to add user to group {group}":"No se puede añadir el usuario al grupo {group}",
"Unable to remove user from group {group}":"No se puede eliminar el usuario del grupo {group}",
"Add group":"Añadir grupo",
"Invalid quota value \"{val}\"":"Valor de cuota inválido \"{val}\"",
"You need to set your user email before being able to send test emails.":"Tiene que configurar su dirección de correo electrónico antes de poder enviar mensajes de prueba.",
"Invalid request":"Petición no válida",
"Invalid mail address":"Dirección de correo inválida",
"No valid group selected":"No se ha seleccionado un grupo válido",
"A user with that name already exists.":"Ya existe un usuario con ese nombre.",
"Unable to create user.":"No se pudo crear el usuario.",
"Your %s account was created":"Se ha creado su cuenta de %s",
@ -120,6 +121,8 @@
"undo":"deshacer",
"never":"nunca",
"deleted {userName}":"borrado {userName}",
"Unable to add user to group {group}":"No se puede añadir el usuario al grupo {group}",
"Unable to remove user from group {group}":"No se puede eliminar el usuario del grupo {group}",
"Add group":"Añadir grupo",
"Invalid quota value \"{val}\"":"Valor de cuota inválido \"{val}\"",
"You need to set your user email before being able to send test emails.":"Vous devez définir une adresse e-mail dans vos paramètres personnels avant de pouvoir envoyer des e-mails de test.",
"Invalid request":"Requête non valide",
"Invalid mail address":"Adresse e-mail non valide",
"No valid group selected":"Aucun groupe valide sélectionné",
"A user with that name already exists.":"Un utilisateur à ce nom existe déjà.",
"Unable to create user.":"Impossible de créer l'utilisateur.",
"Your %s account was created":"Votre compte %s a été créé",
@ -117,7 +118,7 @@ OC.L10N.register(
"Groups":"Groupes",
"Unable to delete {objName}":"Impossible de supprimer {objName}",
"Error creating group: {message}":"Erreur lors de la création du groupe : {message}",
"A valid group name must be provided":"Vous devez spécifier un nom de groupe valide",
"A valid group name must be provided":"Vous devez indiquer un nom de groupe valide",
"deleted {groupName}":"{groupName} supprimé",
"undo":"annuler",
"never":"jamais",
@ -209,7 +210,7 @@ OC.L10N.register(
"Allow users to share via link":"Autoriser les utilisateurs à partager par lien",
"Allow public uploads":"Autoriser les téléversements publics",
"Enforce password protection":"Imposer la protection par mot de passe",
"Set default expiration date":"Spécifier une date d'expiration par défaut",
"Set default expiration date":"Indiquer une date d'expiration par défaut",
"Expire after ":"Expiration après ",
"days":"jours",
"Enforce expiration date":"Imposer la date d'expiration",
"You need to set your user email before being able to send test emails.":"Vous devez définir une adresse e-mail dans vos paramètres personnels avant de pouvoir envoyer des e-mails de test.",
"Invalid request":"Requête non valide",
"Invalid mail address":"Adresse e-mail non valide",
"No valid group selected":"Aucun groupe valide sélectionné",
"A user with that name already exists.":"Un utilisateur à ce nom existe déjà.",
"Unable to create user.":"Impossible de créer l'utilisateur.",
"Your %s account was created":"Votre compte %s a été créé",
@ -115,7 +116,7 @@
"Groups":"Groupes",
"Unable to delete {objName}":"Impossible de supprimer {objName}",
"Error creating group: {message}":"Erreur lors de la création du groupe : {message}",
"A valid group name must be provided":"Vous devez spécifier un nom de groupe valide",
"A valid group name must be provided":"Vous devez indiquer un nom de groupe valide",
"deleted {groupName}":"{groupName} supprimé",
"undo":"annuler",
"never":"jamais",
@ -207,7 +208,7 @@
"Allow users to share via link":"Autoriser les utilisateurs à partager par lien",
"Allow public uploads":"Autoriser les téléversements publics",
"Enforce password protection":"Imposer la protection par mot de passe",
"Set default expiration date":"Spécifier une date d'expiration par défaut",
"Set default expiration date":"Indiquer une date d'expiration par défaut",
"Expire after ":"Expiration après ",
"days":"jours",
"Enforce expiration date":"Imposer la date d'expiration",
"You need to set your user email before being able to send test emails.":"Nepieciešams norādīt sava lietotāja e-pasta adresi, lai nosūtīta testa e-pastus.",
"Invalid request":"Nederīgs vaicājums",
"Invalid mail address":"Nepareiza e-pasta adrese",
"No valid group selected":"Atlasītā grupa nav derīga",
"A user with that name already exists.":"Jau pastāv lietotājs ar šo vārdu.",
"Unable to create user.":"Nevar izveidot lietotāju.",
"Your %s account was created":"Konts %s ir izveidots",
"You need to set your user email before being able to send test emails.":"Nepieciešams norādīt sava lietotāja e-pasta adresi, lai nosūtīta testa e-pastus.",
"Invalid request":"Nederīgs vaicājums",
"Invalid mail address":"Nepareiza e-pasta adrese",
"No valid group selected":"Atlasītā grupa nav derīga",
"A user with that name already exists.":"Jau pastāv lietotājs ar šo vārdu.",
"Unable to create user.":"Nevar izveidot lietotāju.",
"Your %s account was created":"Konts %s ir izveidots",
"You need to set your user email before being able to send test emails.":"Você precisa configurar seu e-mail de usuário antes de ser capaz de enviar e-mails de teste.",
"Invalid request":"Pedido inválido",
"Invalid mail address":"Endereço de e-mail inválido",
"No valid group selected":"Nenhum grupo válido foi selecionado",
"A user with that name already exists.":"Um usuário com esse nome já existe.",
"Unable to create user.":"Não é possível criar usuário.",
"Your %s account was created":"Sua conta %s foi criada",
"You need to set your user email before being able to send test emails.":"Você precisa configurar seu e-mail de usuário antes de ser capaz de enviar e-mails de teste.",
"Invalid request":"Pedido inválido",
"Invalid mail address":"Endereço de e-mail inválido",
"No valid group selected":"Nenhum grupo válido foi selecionado",
"A user with that name already exists.":"Um usuário com esse nome já existe.",
"Unable to create user.":"Não é possível criar usuário.",
"Your %s account was created":"Sua conta %s foi criada",
"You need to set your user email before being able to send test emails.":"Вы должны настроить свой адрес электронной почты прежде чем отправлять тестовые сообщения.",
"Invalid request":"Неправильный запрос",
"Invalid mail address":"Некорректный адрес электронной почты",
"No valid group selected":"Не выбрана верная группа",
"A user with that name already exists.":"Пользователь с таким именем уже существует.",
"Unable to create user.":"Невозможно создать пользователя.",
"Your %s account was created":"Учетная запись %s создана",
"You need to set your user email before being able to send test emails.":"Вы должны настроить свой адрес электронной почты прежде чем отправлять тестовые сообщения.",
"Invalid request":"Неправильный запрос",
"Invalid mail address":"Некорректный адрес электронной почты",
"No valid group selected":"Не выбрана верная группа",
"A user with that name already exists.":"Пользователь с таким именем уже существует.",
"Unable to create user.":"Невозможно создать пользователя.",
"Your %s account was created":"Учетная запись %s создана",
"Please provide an admin recovery password, otherwise all user data will be lost":"请提供管理员恢复密码，否则所有用户的数据都将遗失。",
"Wrong admin recovery password. Please check the password and try again.":"错误的管理员恢复密码。请检查密码并重试。",
"Backend doesn't support password change, but the user's encryption key was successfully updated.":"后端不支持密码更改，但用户的加密密钥已成功更新。",
"Please provide an admin recovery password, otherwise all user data will be lost":"请提供管理员恢复密码, 否则所有用户的数据都将丢失.",
"Wrong admin recovery password. Please check the password and try again.":"错误的管理员恢复密码. 请检查密码并重试.",
"Backend doesn't support password change, but the user's encryption key was successfully updated.":"后端不支持修改密码, 但用户的加密密钥已成功更新.",
"installing and updating apps via the app store or Federated Cloud Sharing":"通过应用程序商店或联合云共享安装和更新应用程序",
"Federated Cloud Sharing":"联合云共享",
"cURL is using an outdated %s version (%s). Please update your operating system or features such as %s will not work reliably.":"cURL使用了过时 %s 版本 (%s)。请更新你的操作系统或功能比如 %s 将无法可靠地工作。",
"A problem occurred, please check your log files (Error: %s)":"出现了故障，请检查你的日志文件 (错误: %s)",
"cURL is using an outdated %s version (%s). Please update your operating system or features such as %s will not work reliably.":"cURL 当前使用的过时 %s 的版本 (%s). 请更新你的操作系统或组件, 例如 %s 将无法可靠地工作.",
"A problem occurred, please check your log files (Error: %s)":"出现了问题, 请检查您的日志文件 (错误: %s)",
"Migration Completed":"迁移完成",
"Group already exists.":"组已经存在。",
"Unable to add group.":"无法添加组。",
"Unable to delete group.":"无法删除组",
"Group already exists.":"分组已经存在.",
"Unable to add group.":"无法添加分组.",
"Unable to delete group.":"无法删除分组.",
"test email settings":"测试电子邮件设置",
"A problem occurred while sending the email. Please revise your settings. (Error: %s)":"在发送电子邮件时出现问题。请修改您的设置。 (错误: %s)",
"A problem occurred while sending the email. Please revise your settings. (Error: %s)":"在发送电子邮件时出现问题. 请修正您的设置. (错误: %s)",
"Email sent":"邮件已发送",
"You need to set your user email before being able to send test emails.":"在发送测试邮件前您需要设置您的用户电子邮件。",
"You need to set your user email before being able to send test emails.":"在发送测试邮件前您需要设置您的电子邮件地址.",
"Invalid request":"无效请求",
"Invalid mail address":"无效的电子邮件地址",
"A user with that name already exists.":"使用该名称的用户已存在。",
"Unable to create user.":"无法创建用户。",
"No valid group selected":"没有选择有效的分组",
"A user with that name already exists.":"使用该名称的用户已存在.",
"Unable to create user.":"无法创建用户.",
"Your %s account was created":"你的帐户 %s 已创建",
"Unable to delete user.":"不能删除用户",
"Unable to delete user.":"无法删除用户",
"Settings saved":"设置已保存",
"Unable to change full name":"无法修改全名",
"Unable to change email address":"无法更改邮箱地址",
"Your full name has been changed.":"您的全名已修改。",
"Unable to change email address":"无法修改电子邮箱地址",
"Your full name has been changed.":"您的全名已修改.",
"Forbidden":"被禁止",
"Invalid user":"用户无效",
"Unable to change mail address":"无法更改邮箱地址",
"Invalid user":"无效用户",
"Unable to change mail address":"无法修改电子邮箱地址",
"Email saved":"电子邮件已保存",
"Password confirmation is required":"需要密码确认",
"Couldn't remove app.":"无法删除应用。",
"Couldn't update app.":"无法更新应用。",
"Are you really sure you want add {domain} as trusted domain?":"您确定要将 {domain} 添加为受信任的域吗？",
"Add trusted domain":"添加信任域",
"Migration in progress. Please wait until the migration is finished":"迁移正在进行中。请等待，直到完成迁移",
"Couldn't remove app.":"无法删除应用.",
"Couldn't update app.":"无法更新应用.",
"Are you really sure you want add {domain} as trusted domain?":"您确定将 {domain} 添加为信任的域名么？",
"Add trusted domain":"添加信任域名",
"Migration in progress. Please wait until the migration is finished":"正在进行迁移. 请稍等, 直到迁移完成",
"Migration started …":"迁移开始...",
"Not saved":"未保存",
"Sending...":"正在发送...",
@ -51,13 +52,14 @@ OC.L10N.register(
"Update to %s":"更新为 %s",
"_You have %n app update pending_::_You have %n app updates pending_":["%n 个应用正在等待升级"],
"No apps found for your version":"未找到适合当前版本的应用",
"The app will be downloaded from the app store":"该应用程序将从应用商店下载",
"Approved apps are developed by trusted developers and have passed a cursory security check. They are actively maintained in an open code repository and their maintainers deem them to be stable for casual to normal use.":"已认可的应用是由值得信赖的开发商开发，并已通过了一个粗略的安全检查。他们放在一个开放的代码库并且维护人员认为他们是稳定的差不多可以正常使用。",
"This app is not checked for security issues and is new or known to be unstable. Install at your own risk.":"此应用未检查安全问题，它是新的或已知是不稳定的。安装风险自担。",
"Enabling app …":"启用应用程序",
"The app will be downloaded from the app store":"该应用将从应用商店下载",
"Official apps are developed by and within the community. They offer central functionality and are ready for production use.":"官方应用由社区和内部开发. 其可以提供核心功能并保证生产用途.",
"Approved apps are developed by trusted developers and have passed a cursory security check. They are actively maintained in an open code repository and their maintainers deem them to be stable for casual to normal use.":"认证应用由值得信赖的开发者开发, 并通过了一个粗略的安全检查. 其在开放的代码库中活跃地维护, 他们的维护者认为在普通用途足够稳定.",
"This app is not checked for security issues and is new or known to be unstable. Install at your own risk.":"此应用没有检查安全问题, 它是新的或已知不稳定的. 安装风险自担.",
"Enabling app …":"正在启用应用程序...",
"Error while disabling app":"禁用应用时出错",
"Disable":"禁用",
"Enable":"开启",
"Enable":"启用",
"Error while enabling app":"启用应用时出错",
"Error: this app cannot be enabled because it makes the server unstable":"错误: 无法启用应用因为它会导致服务器不稳定",
"Error: could not disable broken app":"错误: 无法禁用损坏的应用",
@ -65,15 +67,15 @@ OC.L10N.register(
"Updating....":"正在更新....",
"Error while updating app":"更新应用时出错",
"Updated":"已更新",
"Uninstalling ....":"卸载中....",
"Uninstalling ....":"正在卸载....",
"Error while uninstalling app":"卸载应用时发生了一个错误",
"Uninstall":"卸载",
"The app has been enabled but needs to be updated. You will be redirected to the update page in 5 seconds.":"该应用已启用，但是需要更新。5秒后将跳转到更新页面。",
"App update":"应用更新",
"Approved":"已认可",
"The app has been enabled but needs to be updated. You will be redirected to the update page in 5 seconds.":"该应用已启用, 但是需要更新. 5秒后将跳转到更新页面.",
"App update":"更新应用",
"Approved":"已认证",
"Experimental":"实验",
"No apps found for {query}":"找不到符合 {query} 的应用程序",
"Allow filesystem access":"允许文件系统访问",
"No apps found for {query}":"找不到符合 {query} 的应用",
"Allow filesystem access":"允许访问文件系统",
"Disconnect":"断开连接",
"Revoke":"撤销",
"Internet Explorer":"Internet Explorer",
@ -84,33 +86,51 @@ OC.L10N.register(
"Google Chrome for Android":"Google Chrome for Android",
"This is used for sending out notifications.":"这被用于发送通知。",
"This is used for sending out notifications.":"这被用于发送通知.",
"Send mode":"发送模式",
"Encryption":"加密",
"From address":"来自地址",
@ -142,39 +166,47 @@ OC.L10N.register(
"Send email":"发送邮件",
"Server-side encryption":"服务器端加密",
"Enable server-side encryption":"启用服务器端加密",
"Please read carefully before activating server-side encryption: ":"在激活服务器端加密之前，请仔细阅读：",
"Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met.":"一旦加密被启用，之后上传到服务器的所有文件都将服务器上加密。只有当启用状态的加密模块支持解密并且所有的先决条件(例如，设定恢复键)得到满足时才能解除加密。",
"Be aware that encryption always increases the file size.":"请注意，加密会增加文件大小。",
"It is always good to create regular backups of your data, in case of encryption make sure to backup the encryption keys along with your data.":"定期备份数据有利于保证数据完整，并且确保备份您的加密数据和加密密钥。",
"This is the final warning: Do you really want to enable encryption?":"这是最后一次警告：你真的想启用加密？",
"Please read carefully before activating server-side encryption: ":"在激活服务器端加密之前, 请仔细阅读:",
"Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met.":"一旦加密被启用, 之后上传到服务器的所有文件都将服务器上加密. 只有当启用状态的加密模块支持解密并且所有前提都满足时 (例如: 设定恢复密钥) 才能解除加密.",
"Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases.":"单独的加密不能保证系统的安全性. 请参考加密应用工作原理和支持的用例的文档获取更多信息",
"Be aware that encryption always increases the file size.":"请注意, 加密会增加文件大小.",
"It is always good to create regular backups of your data, in case of encryption make sure to backup the encryption keys along with your data.":"定期备份数据有助于保证数据完整, 并且确保备份您的加密数据和加密密钥.",
"This is the final warning: Do you really want to enable encryption?":"这是最后一次警告: 你确定要启用加密?",
"Enable encryption":"启用加密",
"No encryption module loaded, please enable an encryption module in the app menu.":"没有加载加密模块，请在 APP 应用菜单中启用加密模块。",
"Select default encryption module:":"选择默认的加密模块：",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run 'occ encryption:migrate'":"你需要升级你的加密密钥 (旧版 ownCloud <= 8.0) 。 请在应用中启用 \\\"Default encryption module\\\" 并运行 'occ encryption:migrate'",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one.":"您需要将加密密钥从旧版(ownCloud<=8.0)迁移到新版。",
"No encryption module loaded, please enable an encryption module in the app menu.":"没有加载加密模块, 请在 APP 应用菜单中启用加密模块.",
"Select default encryption module:":"选择默认的加密模块:",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run 'occ encryption:migrate'":"您需要从旧版本 (ownCloud <= 8.0) 迁移您的加密密钥. 请在应用中启用 \\\"Default encryption module\\\" 并运行 'occ encryption:migrate'",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one.":"您需要从旧版本 (ownCloud<=8.0) 迁移您的加密密钥.",
"Start migration":"开始迁移",
"Security & setup warnings":"安全及设置警告",
"php does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response.":"PHP 似乎没有设置好查询的系统环境变量。 用 getenv(\\\"PATH\\\") 测试只返回一个空值。",
"The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update.":"只读配置已启用。这样可防止通过 WEB 接口设置一些配置。此外，每次更新后该文件需要手动设置为可写。",
"PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible.":"PHP 被设置为移除行内 <doc> 块，这将导致数个核心应用无法访问。",
"This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator.":"这可能是由缓存/加速器造成的，例如 Zend OPcache 或 eAccelerator。",
"The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection.":"PHP模块'文件信息'丢失. 我们强烈建议启用此模块以便mime类型检测取得最佳结果.",
"System locale can not be set to a one which supports UTF-8.":"系统语系无法设置为支持 UTF-8 的语系。",
"This means that there might be problems with certain characters in file names.":"这意味着一些文件名中的特定字符可能有问题。",
"We strongly suggest installing the required packages on your system to support one of the following locales: %s.":"我们强烈建议安装在系统上所需的软件包支持以下区域设置之一： %s.",
"If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")":"如果你不是安装在网域根目录而且又使用系统定时计划任务，那么可以导致 URL 链接生成问题。为了避免这些问题，请在你的 Config.php 文件中设置 \\\"overwrite.cli.url\\\" 选项为 webroot 安装根目录 (建议: \\\"%s\\\")",
"It was not possible to execute the cronjob via CLI. The following technical errors have appeared:":"由于下面的错误，无法通过 CLI 执行定时计划任务:",
"All checks passed.":"所有检查已通过。",
"php does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response.":"PHP 的设置似乎有问题, 无法获取系统环境变量. 使用 getenv(\\\"PATH\\\") 测试时仅返回空结果.",
"Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for php configuration notes and the php configuration of your server, especially when using php-fpm.":"请检查 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">安装文档 ↗</a> 中关于 PHP 配置的说明并在您的服务器中进行配置, 尤其是使用 php-fpm 时.",
"The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update.":"已启用只读配置. 这将阻止在 Web 界面中进行设置. 此外, 每次更新后该文件需要手动设置为可写入.",
"PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible.":"PHP 被设置为移除内联块, 这将导致多个核心应用无法访问.",
"This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator.":"这可能是由缓存/加速器造成的, 例如 Zend OPcache 或 eAccelerator.",
"Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel.":"您的数据库不能在 \"READ COMMITTED\" 事务隔离级别运行. 这样可能导致在多个并行操作时出现问题.",
"%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version.":"已安装 %1$s 的低版本 %2$s. 出于稳定性和性能的原因, 我们建议您升级到更新的 %1$s 版本.",
"The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection.":"PHP 模块 'fileinfo' 缺失. 我们强烈建议启用此模块以便在 MIME 类型检测时获得最准确的结果.",
"Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information.":"事务文件锁被禁用, 这可能导致竞争条件的问题. 在 config.php 中启用 'filelocking.enabled' 选项来避免这些问题. 请参考 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档↗</a> 获取更多信息.",
"System locale can not be set to a one which supports UTF-8.":"系统区域无法设置为支持 UTF-8 的区域.",
"This means that there might be problems with certain characters in file names.":"这意味着当文件名中包含特定字符时可能出现问题.",
"We strongly suggest installing the required packages on your system to support one of the following locales: %s.":"我们强烈建议在您的系统中安装需要的包以支持下列区域: %s.",
"If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")":"如果您不是安装在域名的根目录, 并且使用系统 cron 服务时, 可能导致 URL 生成问题. 为了避免这些问题, 请在您的 config.php 文件中设置 \"overwrite.cli.url\" 选项为您的安装根目录路径 (建议: \"%s\")",
"It was not possible to execute the cronjob via CLI. The following technical errors have appeared:":"由于下列的技术错误, 无法通过 CLI 执行计划任务:",
"Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>.":"请再次检查 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">安装指南 ↗</a>, 并检查 <a href=\"%s\">日志</a> 中的任何错误或警告.",
"Execute one task with each page loaded":"每个页面加载后执行一个任务",
"cron.php is registered at a webcron service to call cron.php every 15 minutes over http.":"cron.php 已注册于一个 webcron 服务来通过 http 每 15 分钟执行 cron.php。",
"Use system's cron service to call the cron.php file every 15 minutes.":"使用系统 CRON 服务每 15 分钟执行一次 cron.php 文件。",
"cron.php is registered at a webcron service to call cron.php every 15 minutes over http.":"cron.php 注册到 webcron 服务上, 通过 http 每 15 分钟执行 cron.php.",
"Use system's cron service to call the cron.php file every 15 minutes.":"使用系统 cron 服务每 15 分钟执行一次 cron.php 文件.",
"The cron.php needs to be executed by the system user \"%s\".":"cron.php 需要被系统用户 \"%s\" 执行.",
"To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details.":"为了运行该功能, 您需要 PHP posix 扩展. 请参考 {linkstart}PHP 文档{linkend} 获取更多信息.",
"Version":"版本",
"Sharing":"共享",
"Allow apps to use the Share API":"允许应用软件使用共享API",
"Allow apps to use the Share API":"允许应用使用共享API",
"Allow users to share via link":"允许用户通过链接分享文件",
"Allow public uploads":"允许公开上传",
"Enforce password protection":"强制密码保护",
@ -182,96 +214,143 @@ OC.L10N.register(
"Expire after ":"过期于",
"days":"天",
"Enforce expiration date":"强制过期日期",
"Allow resharing":"允许再次共享",
"Allow resharing":"允许二次共享",
"Allow sharing with groups":"允许群组共享",
"Restrict users to only share with users in their groups":"限制仅与组内用户分享",
"Exclude groups from sharing":"在分享中排除组",
"These groups will still be able to receive shares, but not to initiate them.":"这些组将仍可以获取分享，但无法向他人分享。",
"Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered.":"允许在共享对话框中的自动补全用户名。如果被禁用，需要输入用户全名。",
"Tips & tricks":"技巧提示",
"How to do backups":"如何做备份",
"These groups will still be able to receive shares, but not to initiate them.":"这些组将仍可以获取分享, 但无法向他人分享.",
"Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered.":"允许在共享对话框中自动补全用户名. 如果被禁用, 需要输入完整的用户名.",
"Show disclaimer text on the public link upload page. (Only shown when the file list is hidden.)":"在公开链接上传页中显示免责声明. (仅当文件列表隐藏时显示)",
"This text will be shown on the public link upload page when the file list is hidden.":"这些内容将在公开链接上传页中当文件列表隐藏时显示.",
"Tips & tricks":"小提示",
"SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend.":"SQLite 当前被用作数据库. 对于较大数据量的安装和使用, 我们建议您切换到不同的数据库后端.",
"This is particularly recommended when using the desktop client for file synchronisation.":"当时用桌面客户端同步文件时特别推荐.",
"To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.":"合并其他数据库可以使用命令行工具: 'occ db:convert-type', 或查看 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档 ↗</a>.",
"How to do backups":"如何备份",
"Advanced monitoring":"高级监控",
"Performance tuning":"性能优化",
"Improving the config.php":"正在优化 config.php",
"Theming":"主题",
"Hardening and security guidance":"强化和安全指南",
"Developer documentation":"开发者文档",
"by %s":"由 %s",
"%s-licensed":"%s-许可协议",
"Documentation:":"文档：",
"Documentation:":"文档:",
"User documentation":"用户文档",
"Admin documentation":"管理员文档",
"Visit website":"访问网站",
"Report a bug":"报告问题",
"Show description …":"显示描述...",
"Hide description …":"隐藏描述...",
"This app has an update available.":"此应用有可用的更新。",
"This app cannot be installed because the following dependencies are not fulfilled:":"此应用程序无法安装，因为以下依赖性不满足：",
"Enable only for specific groups":"仅对特定的组开放",
"This app has an update available.":"此应用有可用的更新.",
"This app has no minimum Nextcloud version assigned. This will be an error in the future.":"该应用没有指定支持的 Nextcloud 最低版本. 可能会在将来出现问题.",
"This app has no maximum Nextcloud version assigned. This will be an error in the future.":"该应用没有指定支持的 Nextcloud 最高版本. 可能会在将来出现问题.",
"This app cannot be installed because the following dependencies are not fulfilled:":"无法安装应用, 因为无法满足下列依赖: ",
"Enable only for specific groups":"仅特定组启用",
"Uninstall app":"卸载应用",
"SSL Root Certificates":"SSL 根证书",
"Common Name":"通用名称",
"Valid until":"有效期至",
"Issued By":"授权由",
"Valid until %s":"有效期至 %s",
"Import root certificate":"导入根证书",
"Cheers!":"干杯！",
"Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>":"您好,<br><br>您刚刚创建了 %s 账户<br><br>您的用户名: <strong>%s</strong><br>现在访问: <strong><a href=\"%s\">%s</a></strong><br><br>",
"Cheers!":"干杯!",
"Hey there,\n\njust letting you know that you now have a %s account.\n\nYour username: %s\nAccess it: %s\n\n":"您好,\n\n您刚刚创建了 %s 账户.\n\n您的用户名: %s\n现在访问: %s\n",
"Administrator documentation":"管理员文档",
"Online documentation":"在线文档",
"Forum":"论坛",
"Getting help":"获取帮助",
"Commercial support":"商业支持",
"Profile picture":"联系人图片",
"Upload new":"上传新的",
"You are using <strong>%s</strong> of <strong>%s</strong>":"您正在使用 <strong>%s</strong> of <strong>%s</strong>",
"For password recovery and notifications":"用户恢复密码通知",
"You are member of the following groups:":"您是以下组的成员：",
"For password recovery and notifications":"用于密码恢复和通知",
"Phone number":"电话号码",
"Your phone number":"您的电话号码",
"Address":"地址",
"Your postal address":"您的邮寄地址",
"Website":"网站",
"Your website":"您的网站",
"Twitter":"Twitter",
"Your Twitter handle":"您的 Twitter 账号",
"You are member of the following groups:":"您是以下组的成员:",
"Password":"密码",
"Current password":"当前密码",
"New password":"新密码",
"Change password":"修改密码",
"Language":"语言",
"Help translate":"帮助翻译",
"Get the apps to sync your files":"安装应用进行文件同步",
"Get the apps to sync your files":"下载应用同步您的文件",
"Desktop client":"桌面客户端",
"Android app":"Android 应用",
"iOS app":"iOS 应用",
"If you want to support the project {contributeopen}join development{linkclose} or {contributeopen}spread the word{linkclose}!":"如果您想支持这个项目 {contributeopen}一起开发{linkclose} 或 {contributeopen}帮助传播{linkclose}!",
"Show First Run Wizard again":"再次显示首次运行向导",
"Web, desktop and mobile clients currently logged in to your account.":"您账号当前登录的 Web 页面, 桌面和客户端客户端.",
"Device":"设备",
"Last activity":"最后活跃",
"Passcodes that give an app or device permissions to access your account.":"Passcodes 可以使应用或设备访问您的账号.",
"Name":"名称",
"App name":"应用名",
"Create new app password":"创建新应用密码",
"Use the credentials below to configure your app or device.":"使用下述凭据配置您的应用或设备.",
"For security reasons this password will only be shown once.":"由于安全原因, 密码仅会显示一次.",
"Username":"用户名",
"Done":"完成",
"Developed by the {communityopen}Nextcloud community{linkclose}, the {githubopen}source code{linkclose} is licensed under the {licenseopen}AGPL{linkclose}.":"由 {communityopen}Nextcloud community{linkclose} 开发, {githubopen}源代码{linkclose} 基于 {licenseopen}AGPL{linkclose} 许可协议.",
"Follow us on Google Plus!":"在 Google+ 上关注我们!",
"Like our facebook page!":"点赞我们 facebook 页面!",
"Subscribe to our twitter channel!":"关注我们的 twitter!",
"Subscribe to our news feed!":"订阅我们 RSS 最新消息!",
"Subscribe to our newsletter!":"订阅我们的最新消息!",
"Show storage location":"显示存储位置",
"Show last log in":"显示最后登录",
"Show user backend":"显示用户后端",
"Show user backend":"显示用户来源",
"Send email to new user":"发送电子邮件给新用户",
"Show email address":"显示邮件地址",
"E-Mail":"E-Mail",
"Create":"创建",
"Admin Recovery Password":"管理恢复密码",
"Enter the recovery password in order to recover the users files during password change":"输入恢复密码来在更改密码的时候恢复用户文件",
"Group name":"分组名",
"Everyone":"所有人",
"Admins":"管理员",
"Please enter storage quota (ex: \"512 MB\" or \"12 GB\")":"请输入存储限额 (ex: \"512 MB\" or \"12 GB\")",
"Default quota":"默认配额",
"Please enter storage quota (ex: \"512 MB\" or \"12 GB\")":"请输入存储配额 (例如: \"512 MB\" 或 \"12 GB\")",
"Other":"其它",
"Group admin for":"分组管理员",
"Quota":"配额",
"Storage location":"存储位置",
"User backend":"用户来源",
"Last login":"最后登录",
"change full name":"更改全名",
"set new password":"设置新密码",
"change email address":"修改电子邮箱地址",
"Default":"默认",
"log-level out of allowed range":"日志级别超出允许的范围",
"Language changed":"语言已修改",
"Admins can't remove themself from the admin group":"管理员不能将自己移出管理组。",
"Unable to add user to group %s":"无法把用户增加到组 %s",
"Unable to remove user from group %s":"无法从组%s中移除用户",
"Are you really sure you want add \"{domain}\" as trusted domain?":"你真的希望添加 \"{domain}\" 为信任域？",
"Admins can't remove themself from the admin group":"管理员不能将自己移出管理组",
"Unable to add user to group %s":"无法将用户添加到分组 %s",
"Unable to remove user from group %s":"无法从分组%s中移除用户",
"Are you really sure you want add \"{domain}\" as trusted domain?":"您确定将 \"{domain}\" 添加为信任的域名么？",
"Info, warnings, errors and fatal issues":"信息, 警告, 错误和灾难性问题",
"Warnings, errors and fatal issues":"警告, 错误和灾难性问题",
"Errors and fatal issues":"错误和灾难性问题",
"Fatal issues only":"仅灾难性问题",
"Log":"日志",
@ -279,17 +358,25 @@ OC.L10N.register(
"Download logfile":"下载日志文件",
"More":"更多",
"Less":"更少",
"The logfile is bigger than 100 MB. Downloading it may take some time!":"日志文件超过 100 MB。下载可能需要一些时间！",
"The logfile is bigger than 100 MB. Downloading it may take some time!":"日志文件超过了 100 MB. 下载可能需要一些时间!",
"Allow users to send mail notification for shared files":"允许用户发送共享文件的邮件通知",
"Allow users to send mail notification for shared files to other users":"允许用户发送共享文件的邮件通知给其他用户",
"SQLite is used as database. For larger installations we recommend to switch to a different database backend.":"SQLite 被用作数据库。对于较大数据量的安装和使用，我们建议您切换到不同的数据库后端。",
"Especially when using the desktop client for file syncing the use of SQLite is discouraged.":"特别当使用桌面客户端来同步文件时，不鼓励使用 SQLite 。",
"SQLite is used as database. For larger installations we recommend to switch to a different database backend.":"SQLite 被用作数据库. 对于较大数据量的安装和使用, 我们建议您切换到不同的数据库后端.",
"Especially when using the desktop client for file syncing the use of SQLite is discouraged.":"特别当使用桌面客户端同步文件时, 不建议使用 SQLite.",
"Experimental applications ahead":"未来的实验应用",
"Experimental apps are not checked for security issues, new or known to be unstable and under heavy development. Installing them can cause data loss or security breaches.":"实验应用程序没有在安全性的问题上作过多检查，新的或已知的不稳定 BUG 都在开发中。安装它们可能会导致数据丢失或安全漏洞。",
"Experimental apps are not checked for security issues, new or known to be unstable and under heavy development. Installing them can cause data loss or security breaches.":"实验性应用程序没有检查安全性问题, 它是新的或已知不稳定的. 安装它们可能会导致数据丢失或安全漏洞.",
"Uninstall App":"卸载应用",
"Enable experimental apps":"启用实验性应用程序",
"Hey there,<br><br>just letting you know that you now have an %s account.<br><br>Your username: %s<br>Access it: <a href=\"%s\">%s</a><br><br>":"亲，<br><br>现在我们为你开通了 %s 私有云帐户。<br><br>你的用户名： %s<br>访问网址： <a href=\\\"%s\\\">%s</a><br><br>",
"Hey there,\n\njust letting you know that you now have an %s account.\n\nYour username: %s\nAccess it: %s\n\n":"亲，\\n\\n 现在我们为你开通了 %s 私有去帐户。\\n\\n 你的用户名： %s\\n 访问网址： %s\\n 你的初始密码需要咨询系统管理员。或者你也可以在登录页面输入任意密码登录，\\n登录窗口将出现忘记密码链接，点击通过注册邮箱重设初始密码。\\n\\n",
"Group":"分组"
"If you want to support the project\n\t\t<a href=\"https://nextcloud.com/contribute\"\n\t\t\ttarget=\"_blank\" rel=\"noreferrer\">join development</a>\n\t\t<or></or>\n\t\t<a href=\"https://nextcloud.com/contribute\"\n\t\t\ttarget=\"_blank\" rel=\"noreferrer\">spread the word</a>!":"如果您想支持这个项目\n\t<a href=\"https://nextcloud.com/contribute\" target=\"_blank\" rel=\"noreferrer\">一起开发</a>\n\t<or></or>\n\t<a href=\"https://nextcloud.com/contribute\" target=\"_blank\" rel=\"noreferrer\">帮助传播</a>!",
"Please provide an admin recovery password, otherwise all user data will be lost":"请提供管理员恢复密码，否则所有用户的数据都将遗失。",
"Wrong admin recovery password. Please check the password and try again.":"错误的管理员恢复密码。请检查密码并重试。",
"Backend doesn't support password change, but the user's encryption key was successfully updated.":"后端不支持密码更改，但用户的加密密钥已成功更新。",
"Please provide an admin recovery password, otherwise all user data will be lost":"请提供管理员恢复密码, 否则所有用户的数据都将丢失.",
"Wrong admin recovery password. Please check the password and try again.":"错误的管理员恢复密码. 请检查密码并重试.",
"Backend doesn't support password change, but the user's encryption key was successfully updated.":"后端不支持修改密码, 但用户的加密密钥已成功更新.",
"installing and updating apps via the app store or Federated Cloud Sharing":"通过应用程序商店或联合云共享安装和更新应用程序",
"Federated Cloud Sharing":"联合云共享",
"cURL is using an outdated %s version (%s). Please update your operating system or features such as %s will not work reliably.":"cURL使用了过时 %s 版本 (%s)。请更新你的操作系统或功能比如 %s 将无法可靠地工作。",
"A problem occurred, please check your log files (Error: %s)":"出现了故障，请检查你的日志文件 (错误: %s)",
"cURL is using an outdated %s version (%s). Please update your operating system or features such as %s will not work reliably.":"cURL 当前使用的过时 %s 的版本 (%s). 请更新你的操作系统或组件, 例如 %s 将无法可靠地工作.",
"A problem occurred, please check your log files (Error: %s)":"出现了问题, 请检查您的日志文件 (错误: %s)",
"Migration Completed":"迁移完成",
"Group already exists.":"组已经存在。",
"Unable to add group.":"无法添加组。",
"Unable to delete group.":"无法删除组",
"Group already exists.":"分组已经存在.",
"Unable to add group.":"无法添加分组.",
"Unable to delete group.":"无法删除分组.",
"test email settings":"测试电子邮件设置",
"A problem occurred while sending the email. Please revise your settings. (Error: %s)":"在发送电子邮件时出现问题。请修改您的设置。 (错误: %s)",
"A problem occurred while sending the email. Please revise your settings. (Error: %s)":"在发送电子邮件时出现问题. 请修正您的设置. (错误: %s)",
"Email sent":"邮件已发送",
"You need to set your user email before being able to send test emails.":"在发送测试邮件前您需要设置您的用户电子邮件。",
"You need to set your user email before being able to send test emails.":"在发送测试邮件前您需要设置您的电子邮件地址.",
"Invalid request":"无效请求",
"Invalid mail address":"无效的电子邮件地址",
"A user with that name already exists.":"使用该名称的用户已存在。",
"Unable to create user.":"无法创建用户。",
"No valid group selected":"没有选择有效的分组",
"A user with that name already exists.":"使用该名称的用户已存在.",
"Unable to create user.":"无法创建用户.",
"Your %s account was created":"你的帐户 %s 已创建",
"Unable to delete user.":"不能删除用户",
"Unable to delete user.":"无法删除用户",
"Settings saved":"设置已保存",
"Unable to change full name":"无法修改全名",
"Unable to change email address":"无法更改邮箱地址",
"Your full name has been changed.":"您的全名已修改。",
"Unable to change email address":"无法修改电子邮箱地址",
"Your full name has been changed.":"您的全名已修改.",
"Forbidden":"被禁止",
"Invalid user":"用户无效",
"Unable to change mail address":"无法更改邮箱地址",
"Invalid user":"无效用户",
"Unable to change mail address":"无法修改电子邮箱地址",
"Email saved":"电子邮件已保存",
"Password confirmation is required":"需要密码确认",
"Couldn't remove app.":"无法删除应用。",
"Couldn't update app.":"无法更新应用。",
"Are you really sure you want add {domain} as trusted domain?":"您确定要将 {domain} 添加为受信任的域吗？",
"Add trusted domain":"添加信任域",
"Migration in progress. Please wait until the migration is finished":"迁移正在进行中。请等待，直到完成迁移",
"Couldn't remove app.":"无法删除应用.",
"Couldn't update app.":"无法更新应用.",
"Are you really sure you want add {domain} as trusted domain?":"您确定将 {domain} 添加为信任的域名么？",
"Add trusted domain":"添加信任域名",
"Migration in progress. Please wait until the migration is finished":"正在进行迁移. 请稍等, 直到迁移完成",
"Migration started …":"迁移开始...",
"Not saved":"未保存",
"Sending...":"正在发送...",
@ -49,13 +50,14 @@
"Update to %s":"更新为 %s",
"_You have %n app update pending_::_You have %n app updates pending_":["%n 个应用正在等待升级"],
"No apps found for your version":"未找到适合当前版本的应用",
"The app will be downloaded from the app store":"该应用程序将从应用商店下载",
"Approved apps are developed by trusted developers and have passed a cursory security check. They are actively maintained in an open code repository and their maintainers deem them to be stable for casual to normal use.":"已认可的应用是由值得信赖的开发商开发，并已通过了一个粗略的安全检查。他们放在一个开放的代码库并且维护人员认为他们是稳定的差不多可以正常使用。",
"This app is not checked for security issues and is new or known to be unstable. Install at your own risk.":"此应用未检查安全问题，它是新的或已知是不稳定的。安装风险自担。",
"Enabling app …":"启用应用程序",
"The app will be downloaded from the app store":"该应用将从应用商店下载",
"Official apps are developed by and within the community. They offer central functionality and are ready for production use.":"官方应用由社区和内部开发. 其可以提供核心功能并保证生产用途.",
"Approved apps are developed by trusted developers and have passed a cursory security check. They are actively maintained in an open code repository and their maintainers deem them to be stable for casual to normal use.":"认证应用由值得信赖的开发者开发, 并通过了一个粗略的安全检查. 其在开放的代码库中活跃地维护, 他们的维护者认为在普通用途足够稳定.",
"This app is not checked for security issues and is new or known to be unstable. Install at your own risk.":"此应用没有检查安全问题, 它是新的或已知不稳定的. 安装风险自担.",
"Enabling app …":"正在启用应用程序...",
"Error while disabling app":"禁用应用时出错",
"Disable":"禁用",
"Enable":"开启",
"Enable":"启用",
"Error while enabling app":"启用应用时出错",
"Error: this app cannot be enabled because it makes the server unstable":"错误: 无法启用应用因为它会导致服务器不稳定",
"Error: could not disable broken app":"错误: 无法禁用损坏的应用",
@ -63,15 +65,15 @@
"Updating....":"正在更新....",
"Error while updating app":"更新应用时出错",
"Updated":"已更新",
"Uninstalling ....":"卸载中....",
"Uninstalling ....":"正在卸载....",
"Error while uninstalling app":"卸载应用时发生了一个错误",
"Uninstall":"卸载",
"The app has been enabled but needs to be updated. You will be redirected to the update page in 5 seconds.":"该应用已启用，但是需要更新。5秒后将跳转到更新页面。",
"App update":"应用更新",
"Approved":"已认可",
"The app has been enabled but needs to be updated. You will be redirected to the update page in 5 seconds.":"该应用已启用, 但是需要更新. 5秒后将跳转到更新页面.",
"App update":"更新应用",
"Approved":"已认证",
"Experimental":"实验",
"No apps found for {query}":"找不到符合 {query} 的应用程序",
"Allow filesystem access":"允许文件系统访问",
"No apps found for {query}":"找不到符合 {query} 的应用",
"Allow filesystem access":"允许访问文件系统",
"Disconnect":"断开连接",
"Revoke":"撤销",
"Internet Explorer":"Internet Explorer",
@ -82,33 +84,51 @@
"Google Chrome for Android":"Google Chrome for Android",
"This is used for sending out notifications.":"这被用于发送通知。",
"This is used for sending out notifications.":"这被用于发送通知.",
"Send mode":"发送模式",
"Encryption":"加密",
"From address":"来自地址",
@ -140,39 +164,47 @@
"Send email":"发送邮件",
"Server-side encryption":"服务器端加密",
"Enable server-side encryption":"启用服务器端加密",
"Please read carefully before activating server-side encryption: ":"在激活服务器端加密之前，请仔细阅读：",
"Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met.":"一旦加密被启用，之后上传到服务器的所有文件都将服务器上加密。只有当启用状态的加密模块支持解密并且所有的先决条件(例如，设定恢复键)得到满足时才能解除加密。",
"Be aware that encryption always increases the file size.":"请注意，加密会增加文件大小。",
"It is always good to create regular backups of your data, in case of encryption make sure to backup the encryption keys along with your data.":"定期备份数据有利于保证数据完整，并且确保备份您的加密数据和加密密钥。",
"This is the final warning: Do you really want to enable encryption?":"这是最后一次警告：你真的想启用加密？",
"Please read carefully before activating server-side encryption: ":"在激活服务器端加密之前, 请仔细阅读:",
"Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met.":"一旦加密被启用, 之后上传到服务器的所有文件都将服务器上加密. 只有当启用状态的加密模块支持解密并且所有前提都满足时 (例如: 设定恢复密钥) 才能解除加密.",
"Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases.":"单独的加密不能保证系统的安全性. 请参考加密应用工作原理和支持的用例的文档获取更多信息",
"Be aware that encryption always increases the file size.":"请注意, 加密会增加文件大小.",
"It is always good to create regular backups of your data, in case of encryption make sure to backup the encryption keys along with your data.":"定期备份数据有助于保证数据完整, 并且确保备份您的加密数据和加密密钥.",
"This is the final warning: Do you really want to enable encryption?":"这是最后一次警告: 你确定要启用加密?",
"Enable encryption":"启用加密",
"No encryption module loaded, please enable an encryption module in the app menu.":"没有加载加密模块，请在 APP 应用菜单中启用加密模块。",
"Select default encryption module:":"选择默认的加密模块：",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run 'occ encryption:migrate'":"你需要升级你的加密密钥 (旧版 ownCloud <= 8.0) 。 请在应用中启用 \\\"Default encryption module\\\" 并运行 'occ encryption:migrate'",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one.":"您需要将加密密钥从旧版(ownCloud<=8.0)迁移到新版。",
"No encryption module loaded, please enable an encryption module in the app menu.":"没有加载加密模块, 请在 APP 应用菜单中启用加密模块.",
"Select default encryption module:":"选择默认的加密模块:",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run 'occ encryption:migrate'":"您需要从旧版本 (ownCloud <= 8.0) 迁移您的加密密钥. 请在应用中启用 \\\"Default encryption module\\\" 并运行 'occ encryption:migrate'",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one.":"您需要从旧版本 (ownCloud<=8.0) 迁移您的加密密钥.",
"Start migration":"开始迁移",
"Security & setup warnings":"安全及设置警告",
"php does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response.":"PHP 似乎没有设置好查询的系统环境变量。 用 getenv(\\\"PATH\\\") 测试只返回一个空值。",
"The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update.":"只读配置已启用。这样可防止通过 WEB 接口设置一些配置。此外，每次更新后该文件需要手动设置为可写。",
"PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible.":"PHP 被设置为移除行内 <doc> 块，这将导致数个核心应用无法访问。",
"This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator.":"这可能是由缓存/加速器造成的，例如 Zend OPcache 或 eAccelerator。",
"The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection.":"PHP模块'文件信息'丢失. 我们强烈建议启用此模块以便mime类型检测取得最佳结果.",
"System locale can not be set to a one which supports UTF-8.":"系统语系无法设置为支持 UTF-8 的语系。",
"This means that there might be problems with certain characters in file names.":"这意味着一些文件名中的特定字符可能有问题。",
"We strongly suggest installing the required packages on your system to support one of the following locales: %s.":"我们强烈建议安装在系统上所需的软件包支持以下区域设置之一： %s.",
"If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")":"如果你不是安装在网域根目录而且又使用系统定时计划任务，那么可以导致 URL 链接生成问题。为了避免这些问题，请在你的 Config.php 文件中设置 \\\"overwrite.cli.url\\\" 选项为 webroot 安装根目录 (建议: \\\"%s\\\")",
"It was not possible to execute the cronjob via CLI. The following technical errors have appeared:":"由于下面的错误，无法通过 CLI 执行定时计划任务:",
"All checks passed.":"所有检查已通过。",
"php does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response.":"PHP 的设置似乎有问题, 无法获取系统环境变量. 使用 getenv(\\\"PATH\\\") 测试时仅返回空结果.",
"Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for php configuration notes and the php configuration of your server, especially when using php-fpm.":"请检查 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">安装文档 ↗</a> 中关于 PHP 配置的说明并在您的服务器中进行配置, 尤其是使用 php-fpm 时.",
"The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update.":"已启用只读配置. 这将阻止在 Web 界面中进行设置. 此外, 每次更新后该文件需要手动设置为可写入.",
"PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible.":"PHP 被设置为移除内联块, 这将导致多个核心应用无法访问.",
"This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator.":"这可能是由缓存/加速器造成的, 例如 Zend OPcache 或 eAccelerator.",
"Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel.":"您的数据库不能在 \"READ COMMITTED\" 事务隔离级别运行. 这样可能导致在多个并行操作时出现问题.",
"%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version.":"已安装 %1$s 的低版本 %2$s. 出于稳定性和性能的原因, 我们建议您升级到更新的 %1$s 版本.",
"The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection.":"PHP 模块 'fileinfo' 缺失. 我们强烈建议启用此模块以便在 MIME 类型检测时获得最准确的结果.",
"Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information.":"事务文件锁被禁用, 这可能导致竞争条件的问题. 在 config.php 中启用 'filelocking.enabled' 选项来避免这些问题. 请参考 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档↗</a> 获取更多信息.",
"System locale can not be set to a one which supports UTF-8.":"系统区域无法设置为支持 UTF-8 的区域.",
"This means that there might be problems with certain characters in file names.":"这意味着当文件名中包含特定字符时可能出现问题.",
"We strongly suggest installing the required packages on your system to support one of the following locales: %s.":"我们强烈建议在您的系统中安装需要的包以支持下列区域: %s.",
"If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")":"如果您不是安装在域名的根目录, 并且使用系统 cron 服务时, 可能导致 URL 生成问题. 为了避免这些问题, 请在您的 config.php 文件中设置 \"overwrite.cli.url\" 选项为您的安装根目录路径 (建议: \"%s\")",
"It was not possible to execute the cronjob via CLI. The following technical errors have appeared:":"由于下列的技术错误, 无法通过 CLI 执行计划任务:",
"Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>.":"请再次检查 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">安装指南 ↗</a>, 并检查 <a href=\"%s\">日志</a> 中的任何错误或警告.",
"Execute one task with each page loaded":"每个页面加载后执行一个任务",
"cron.php is registered at a webcron service to call cron.php every 15 minutes over http.":"cron.php 已注册于一个 webcron 服务来通过 http 每 15 分钟执行 cron.php。",
"Use system's cron service to call the cron.php file every 15 minutes.":"使用系统 CRON 服务每 15 分钟执行一次 cron.php 文件。",
"cron.php is registered at a webcron service to call cron.php every 15 minutes over http.":"cron.php 注册到 webcron 服务上, 通过 http 每 15 分钟执行 cron.php.",
"Use system's cron service to call the cron.php file every 15 minutes.":"使用系统 cron 服务每 15 分钟执行一次 cron.php 文件.",
"The cron.php needs to be executed by the system user \"%s\".":"cron.php 需要被系统用户 \"%s\" 执行.",
"To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details.":"为了运行该功能, 您需要 PHP posix 扩展. 请参考 {linkstart}PHP 文档{linkend} 获取更多信息.",
"Version":"版本",
"Sharing":"共享",
"Allow apps to use the Share API":"允许应用软件使用共享API",
"Allow apps to use the Share API":"允许应用使用共享API",
"Allow users to share via link":"允许用户通过链接分享文件",
"Allow public uploads":"允许公开上传",
"Enforce password protection":"强制密码保护",
@ -180,96 +212,143 @@
"Expire after ":"过期于",
"days":"天",
"Enforce expiration date":"强制过期日期",
"Allow resharing":"允许再次共享",
"Allow resharing":"允许二次共享",
"Allow sharing with groups":"允许群组共享",
"Restrict users to only share with users in their groups":"限制仅与组内用户分享",
"Exclude groups from sharing":"在分享中排除组",
"These groups will still be able to receive shares, but not to initiate them.":"这些组将仍可以获取分享，但无法向他人分享。",
"Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered.":"允许在共享对话框中的自动补全用户名。如果被禁用，需要输入用户全名。",
"Tips & tricks":"技巧提示",
"How to do backups":"如何做备份",
"These groups will still be able to receive shares, but not to initiate them.":"这些组将仍可以获取分享, 但无法向他人分享.",
"Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered.":"允许在共享对话框中自动补全用户名. 如果被禁用, 需要输入完整的用户名.",
"Show disclaimer text on the public link upload page. (Only shown when the file list is hidden.)":"在公开链接上传页中显示免责声明. (仅当文件列表隐藏时显示)",
"This text will be shown on the public link upload page when the file list is hidden.":"这些内容将在公开链接上传页中当文件列表隐藏时显示.",
"Tips & tricks":"小提示",
"SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend.":"SQLite 当前被用作数据库. 对于较大数据量的安装和使用, 我们建议您切换到不同的数据库后端.",
"This is particularly recommended when using the desktop client for file synchronisation.":"当时用桌面客户端同步文件时特别推荐.",
"To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.":"合并其他数据库可以使用命令行工具: 'occ db:convert-type', 或查看 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档 ↗</a>.",
"How to do backups":"如何备份",
"Advanced monitoring":"高级监控",
"Performance tuning":"性能优化",
"Improving the config.php":"正在优化 config.php",
"Theming":"主题",
"Hardening and security guidance":"强化和安全指南",
"Developer documentation":"开发者文档",
"by %s":"由 %s",
"%s-licensed":"%s-许可协议",
"Documentation:":"文档：",
"Documentation:":"文档:",
"User documentation":"用户文档",
"Admin documentation":"管理员文档",
"Visit website":"访问网站",
"Report a bug":"报告问题",
"Show description …":"显示描述...",
"Hide description …":"隐藏描述...",
"This app has an update available.":"此应用有可用的更新。",
"This app cannot be installed because the following dependencies are not fulfilled:":"此应用程序无法安装，因为以下依赖性不满足：",
"Enable only for specific groups":"仅对特定的组开放",
"This app has an update available.":"此应用有可用的更新.",
"This app has no minimum Nextcloud version assigned. This will be an error in the future.":"该应用没有指定支持的 Nextcloud 最低版本. 可能会在将来出现问题.",
"This app has no maximum Nextcloud version assigned. This will be an error in the future.":"该应用没有指定支持的 Nextcloud 最高版本. 可能会在将来出现问题.",
"This app cannot be installed because the following dependencies are not fulfilled:":"无法安装应用, 因为无法满足下列依赖: ",
"Enable only for specific groups":"仅特定组启用",
"Uninstall app":"卸载应用",
"SSL Root Certificates":"SSL 根证书",
"Common Name":"通用名称",
"Valid until":"有效期至",
"Issued By":"授权由",
"Valid until %s":"有效期至 %s",
"Import root certificate":"导入根证书",
"Cheers!":"干杯！",
"Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>":"您好,<br><br>您刚刚创建了 %s 账户<br><br>您的用户名: <strong>%s</strong><br>现在访问: <strong><a href=\"%s\">%s</a></strong><br><br>",
"Cheers!":"干杯!",
"Hey there,\n\njust letting you know that you now have a %s account.\n\nYour username: %s\nAccess it: %s\n\n":"您好,\n\n您刚刚创建了 %s 账户.\n\n您的用户名: %s\n现在访问: %s\n",
"Administrator documentation":"管理员文档",
"Online documentation":"在线文档",
"Forum":"论坛",
"Getting help":"获取帮助",
"Commercial support":"商业支持",
"Profile picture":"联系人图片",
"Upload new":"上传新的",
"You are using <strong>%s</strong> of <strong>%s</strong>":"您正在使用 <strong>%s</strong> of <strong>%s</strong>",
"For password recovery and notifications":"用户恢复密码通知",
"You are member of the following groups:":"您是以下组的成员：",
"For password recovery and notifications":"用于密码恢复和通知",
"Phone number":"电话号码",
"Your phone number":"您的电话号码",
"Address":"地址",
"Your postal address":"您的邮寄地址",
"Website":"网站",
"Your website":"您的网站",
"Twitter":"Twitter",
"Your Twitter handle":"您的 Twitter 账号",
"You are member of the following groups:":"您是以下组的成员:",
"Password":"密码",
"Current password":"当前密码",
"New password":"新密码",
"Change password":"修改密码",
"Language":"语言",
"Help translate":"帮助翻译",
"Get the apps to sync your files":"安装应用进行文件同步",
"Get the apps to sync your files":"下载应用同步您的文件",
"Desktop client":"桌面客户端",
"Android app":"Android 应用",
"iOS app":"iOS 应用",
"If you want to support the project {contributeopen}join development{linkclose} or {contributeopen}spread the word{linkclose}!":"如果您想支持这个项目 {contributeopen}一起开发{linkclose} 或 {contributeopen}帮助传播{linkclose}!",
"Show First Run Wizard again":"再次显示首次运行向导",
"Web, desktop and mobile clients currently logged in to your account.":"您账号当前登录的 Web 页面, 桌面和客户端客户端.",
"Device":"设备",
"Last activity":"最后活跃",
"Passcodes that give an app or device permissions to access your account.":"Passcodes 可以使应用或设备访问您的账号.",
"Name":"名称",
"App name":"应用名",
"Create new app password":"创建新应用密码",
"Use the credentials below to configure your app or device.":"使用下述凭据配置您的应用或设备.",
"For security reasons this password will only be shown once.":"由于安全原因, 密码仅会显示一次.",
"Username":"用户名",
"Done":"完成",
"Developed by the {communityopen}Nextcloud community{linkclose}, the {githubopen}source code{linkclose} is licensed under the {licenseopen}AGPL{linkclose}.":"由 {communityopen}Nextcloud community{linkclose} 开发, {githubopen}源代码{linkclose} 基于 {licenseopen}AGPL{linkclose} 许可协议.",
"Follow us on Google Plus!":"在 Google+ 上关注我们!",
"Like our facebook page!":"点赞我们 facebook 页面!",
"Subscribe to our twitter channel!":"关注我们的 twitter!",
"Subscribe to our news feed!":"订阅我们 RSS 最新消息!",
"Subscribe to our newsletter!":"订阅我们的最新消息!",
"Show storage location":"显示存储位置",
"Show last log in":"显示最后登录",
"Show user backend":"显示用户后端",
"Show user backend":"显示用户来源",
"Send email to new user":"发送电子邮件给新用户",
"Show email address":"显示邮件地址",
"E-Mail":"E-Mail",
"Create":"创建",
"Admin Recovery Password":"管理恢复密码",
"Enter the recovery password in order to recover the users files during password change":"输入恢复密码来在更改密码的时候恢复用户文件",
"Group name":"分组名",
"Everyone":"所有人",
"Admins":"管理员",
"Please enter storage quota (ex: \"512 MB\" or \"12 GB\")":"请输入存储限额 (ex: \"512 MB\" or \"12 GB\")",
"Default quota":"默认配额",
"Please enter storage quota (ex: \"512 MB\" or \"12 GB\")":"请输入存储配额 (例如: \"512 MB\" 或 \"12 GB\")",
"Other":"其它",
"Group admin for":"分组管理员",
"Quota":"配额",
"Storage location":"存储位置",
"User backend":"用户来源",
"Last login":"最后登录",
"change full name":"更改全名",
"set new password":"设置新密码",
"change email address":"修改电子邮箱地址",
"Default":"默认",
"log-level out of allowed range":"日志级别超出允许的范围",
"Language changed":"语言已修改",
"Admins can't remove themself from the admin group":"管理员不能将自己移出管理组。",
"Unable to add user to group %s":"无法把用户增加到组 %s",
"Unable to remove user from group %s":"无法从组%s中移除用户",
"Are you really sure you want add \"{domain}\" as trusted domain?":"你真的希望添加 \"{domain}\" 为信任域？",
"Admins can't remove themself from the admin group":"管理员不能将自己移出管理组",
"Unable to add user to group %s":"无法将用户添加到分组 %s",
"Unable to remove user from group %s":"无法从分组%s中移除用户",
"Are you really sure you want add \"{domain}\" as trusted domain?":"您确定将 \"{domain}\" 添加为信任的域名么？",
"Info, warnings, errors and fatal issues":"信息, 警告, 错误和灾难性问题",
"Warnings, errors and fatal issues":"警告, 错误和灾难性问题",
"Errors and fatal issues":"错误和灾难性问题",
"Fatal issues only":"仅灾难性问题",
"Log":"日志",
@ -277,17 +356,25 @@
"Download logfile":"下载日志文件",
"More":"更多",
"Less":"更少",
"The logfile is bigger than 100 MB. Downloading it may take some time!":"日志文件超过 100 MB。下载可能需要一些时间！",
"The logfile is bigger than 100 MB. Downloading it may take some time!":"日志文件超过了 100 MB. 下载可能需要一些时间!",
"Allow users to send mail notification for shared files":"允许用户发送共享文件的邮件通知",
"Allow users to send mail notification for shared files to other users":"允许用户发送共享文件的邮件通知给其他用户",
"SQLite is used as database. For larger installations we recommend to switch to a different database backend.":"SQLite 被用作数据库。对于较大数据量的安装和使用，我们建议您切换到不同的数据库后端。",
"Especially when using the desktop client for file syncing the use of SQLite is discouraged.":"特别当使用桌面客户端来同步文件时，不鼓励使用 SQLite 。",
"SQLite is used as database. For larger installations we recommend to switch to a different database backend.":"SQLite 被用作数据库. 对于较大数据量的安装和使用, 我们建议您切换到不同的数据库后端.",
"Especially when using the desktop client for file syncing the use of SQLite is discouraged.":"特别当使用桌面客户端同步文件时, 不建议使用 SQLite.",
"Experimental applications ahead":"未来的实验应用",
"Experimental apps are not checked for security issues, new or known to be unstable and under heavy development. Installing them can cause data loss or security breaches.":"实验应用程序没有在安全性的问题上作过多检查，新的或已知的不稳定 BUG 都在开发中。安装它们可能会导致数据丢失或安全漏洞。",
"Experimental apps are not checked for security issues, new or known to be unstable and under heavy development. Installing them can cause data loss or security breaches.":"实验性应用程序没有检查安全性问题, 它是新的或已知不稳定的. 安装它们可能会导致数据丢失或安全漏洞.",
"Uninstall App":"卸载应用",
"Enable experimental apps":"启用实验性应用程序",
"Hey there,<br><br>just letting you know that you now have an %s account.<br><br>Your username: %s<br>Access it: <a href=\"%s\">%s</a><br><br>":"亲，<br><br>现在我们为你开通了 %s 私有云帐户。<br><br>你的用户名： %s<br>访问网址： <a href=\\\"%s\\\">%s</a><br><br>",
"Hey there,\n\njust letting you know that you now have an %s account.\n\nYour username: %s\nAccess it: %s\n\n":"亲，\\n\\n 现在我们为你开通了 %s 私有去帐户。\\n\\n 你的用户名： %s\\n 访问网址： %s\\n 你的初始密码需要咨询系统管理员。或者你也可以在登录页面输入任意密码登录，\\n登录窗口将出现忘记密码链接，点击通过注册邮箱重设初始密码。\\n\\n",
"Group":"分组"
"If you want to support the project\n\t\t<a href=\"https://nextcloud.com/contribute\"\n\t\t\ttarget=\"_blank\" rel=\"noreferrer\">join development</a>\n\t\t<or></or>\n\t\t<a href=\"https://nextcloud.com/contribute\"\n\t\t\ttarget=\"_blank\" rel=\"noreferrer\">spread the word</a>!":"如果您想支持这个项目\n\t<a href=\"https://nextcloud.com/contribute\" target=\"_blank\" rel=\"noreferrer\">一起开发</a>\n\t<or></or>\n\t<a href=\"https://nextcloud.com/contribute\" target=\"_blank\" rel=\"noreferrer\">帮助传播</a>!",
Nextcloud bot
8 years ago