You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
postgres/src/backend/storage/lmgr/lwlock.c

1866 lines
51 KiB

/*-------------------------------------------------------------------------
*
* lwlock.c
* Lightweight lock manager
*
* Lightweight locks are intended primarily to provide mutual exclusion of
* access to shared-memory data structures. Therefore, they offer both
* exclusive and shared lock modes (to support read/write and read-only
* access to a shared object). There are few other frammishes. User-level
* locking should be done with the full lock manager --- which depends on
* LWLocks to protect its shared state.
*
* In addition to exclusive and shared modes, lightweight locks can be used to
* wait until a variable changes value. The variable is initially not set
* when the lock is acquired with LWLockAcquire, i.e. it remains set to the
* value it was set to when the lock was released last, and can be updated
* without releasing the lock by calling LWLockUpdateVar. LWLockWaitForVar
* waits for the variable to be updated, or until the lock is free. When
* releasing the lock with LWLockReleaseClearVar() the value can be set to an
* appropriate value for a free lock. The meaning of the variable is up to
* the caller, the lightweight lock code just assigns and compares it.
*
* Portions Copyright (c) 1996-2016, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
* IDENTIFICATION
* src/backend/storage/lmgr/lwlock.c
*
* NOTES:
*
* This used to be a pretty straight forward reader-writer lock
* implementation, in which the internal state was protected by a
* spinlock. Unfortunately the overhead of taking the spinlock proved to be
* too high for workloads/locks that were taken in shared mode very
* frequently. Often we were spinning in the (obviously exclusive) spinlock,
* while trying to acquire a shared lock that was actually free.
*
* Thus a new implementation was devised that provides wait-free shared lock
* acquisition for locks that aren't exclusively locked.
*
* The basic idea is to have a single atomic variable 'lockcount' instead of
* the formerly separate shared and exclusive counters and to use atomic
* operations to acquire the lock. That's fairly easy to do for plain
* rw-spinlocks, but a lot harder for something like LWLocks that want to wait
* in the OS.
*
* For lock acquisition we use an atomic compare-and-exchange on the lockcount
* variable. For exclusive lock we swap in a sentinel value
* (LW_VAL_EXCLUSIVE), for shared locks we count the number of holders.
*
* To release the lock we use an atomic decrement to release the lock. If the
* new value is zero (we get that atomically), we know we can/have to release
* waiters.
*
* Obviously it is important that the sentinel value for exclusive locks
* doesn't conflict with the maximum number of possible share lockers -
* luckily MAX_BACKENDS makes that easily possible.
*
*
* The attentive reader might have noticed that naively doing the above has a
* glaring race condition: We try to lock using the atomic operations and
* notice that we have to wait. Unfortunately by the time we have finished
* queuing, the former locker very well might have already finished it's
* work. That's problematic because we're now stuck waiting inside the OS.
* To mitigate those races we use a two phased attempt at locking:
* Phase 1: Try to do it atomically, if we succeed, nice
* Phase 2: Add ourselves to the waitqueue of the lock
* Phase 3: Try to grab the lock again, if we succeed, remove ourselves from
* the queue
* Phase 4: Sleep till wake-up, goto Phase 1
*
* This protects us against the problem from above as nobody can release too
* quick, before we're queued, since after Phase 2 we're already queued.
* -------------------------------------------------------------------------
*/
#include "postgres.h"
#include "miscadmin.h"
#include "pgstat.h"
#include "pg_trace.h"
#include "postmaster/postmaster.h"
#include "replication/slot.h"
#include "storage/ipc.h"
Implement genuine serializable isolation level. Until now, our Serializable mode has in fact been what's called Snapshot Isolation, which allows some anomalies that could not occur in any serialized ordering of the transactions. This patch fixes that using a method called Serializable Snapshot Isolation, based on research papers by Michael J. Cahill (see README-SSI for full references). In Serializable Snapshot Isolation, transactions run like they do in Snapshot Isolation, but a predicate lock manager observes the reads and writes performed and aborts transactions if it detects that an anomaly might occur. This method produces some false positives, ie. it sometimes aborts transactions even though there is no anomaly. To track reads we implement predicate locking, see storage/lmgr/predicate.c. Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared memory is finite, so when a transaction takes many tuple-level locks on a page, the locks are promoted to a single page-level lock, and further to a single relation level lock if necessary. To lock key values with no matching tuple, a sequential scan always takes a relation-level lock, and an index scan acquires a page-level lock that covers the search key, whether or not there are any matching keys at the moment. A predicate lock doesn't conflict with any regular locks or with another predicate locks in the normal sense. They're only used by the predicate lock manager to detect the danger of anomalies. Only serializable transactions participate in predicate locking, so there should be no extra overhead for for other transactions. Predicate locks can't be released at commit, but must be remembered until all the transactions that overlapped with it have completed. That means that we need to remember an unbounded amount of predicate locks, so we apply a lossy but conservative method of tracking locks for committed transactions. If we run short of shared memory, we overflow to a new "pg_serial" SLRU pool. We don't currently allow Serializable transactions in Hot Standby mode. That would be hard, because even read-only transactions can cause anomalies that wouldn't otherwise occur. Serializable isolation mode now means the new fully serializable level. Repeatable Read gives you the old Snapshot Isolation level that we have always had. Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and Anssi Kääriäinen
15 years ago
#include "storage/predicate.h"
#include "storage/proc.h"
#include "storage/spin.h"
#include "utils/memutils.h"
#ifdef LWLOCK_STATS
#include "utils/hsearch.h"
#endif
/* We use the ShmemLock spinlock to protect LWLockCounter */
extern slock_t *ShmemLock;
#define LW_FLAG_HAS_WAITERS ((uint32) 1 << 30)
#define LW_FLAG_RELEASE_OK ((uint32) 1 << 29)
#define LW_VAL_EXCLUSIVE ((uint32) 1 << 24)
#define LW_VAL_SHARED 1
#define LW_LOCK_MASK ((uint32) ((1 << 25)-1))
/* Must be greater than MAX_BACKENDS - which is 2^23-1, so we're fine. */
#define LW_SHARED_MASK ((uint32) ((1 << 24)-1))
/*
* This is indexed by tranche ID and stores metadata for all tranches known
* to the current backend.
*/
static LWLockTranche **LWLockTrancheArray = NULL;
static int LWLockTranchesAllocated = 0;
#define T_NAME(lock) \
(LWLockTrancheArray[(lock)->tranche]->name)
#define T_ID(lock) \
((int) ((((char *) lock) - \
((char *) LWLockTrancheArray[(lock)->tranche]->array_base)) / \
LWLockTrancheArray[(lock)->tranche]->array_stride))
/*
* This points to the main array of LWLocks in shared memory. Backends inherit
* the pointer by fork from the postmaster (except in the EXEC_BACKEND case,
* where we have special measures to pass it down).
*/
LWLockPadded *MainLWLockArray = NULL;
static LWLockTranche MainLWLockTranche;
static LWLockTranche BufMappingLWLockTranche;
static LWLockTranche LockManagerLWLockTranche;
static LWLockTranche PredicateLockManagerLWLockTranche;
/*
* We use this structure to keep track of locked LWLocks for release
* during error recovery. Normally, only a few will be held at once, but
* occasionally the number can be much higher; for example, the pg_buffercache
* extension locks all buffer partitions simultaneously.
*/
#define MAX_SIMUL_LWLOCKS 200
/* struct representing the LWLocks we're holding */
typedef struct LWLockHandle
{
LWLock *lock;
LWLockMode mode;
} LWLockHandle;
static int num_held_lwlocks = 0;
static LWLockHandle held_lwlocks[MAX_SIMUL_LWLOCKS];
/* struct representing the LWLock tranche request for named tranche */
typedef struct NamedLWLockTrancheRequest
{
char tranche_name[NAMEDATALEN];
int num_lwlocks;
} NamedLWLockTrancheRequest;
NamedLWLockTrancheRequest *NamedLWLockTrancheRequestArray = NULL;
static int NamedLWLockTrancheRequestsAllocated = 0;
int NamedLWLockTrancheRequests = 0;
NamedLWLockTranche *NamedLWLockTrancheArray = NULL;
static bool lock_named_request_allowed = true;
static void InitializeLWLocks(void);
static void RegisterLWLockTranches(void);
static inline void LWLockReportWaitStart(LWLock *lock);
static inline void LWLockReportWaitEnd();
#ifdef LWLOCK_STATS
typedef struct lwlock_stats_key
{
int tranche;
int instance;
} lwlock_stats_key;
typedef struct lwlock_stats
{
lwlock_stats_key key;
int sh_acquire_count;
int ex_acquire_count;
int block_count;
int dequeue_self_count;
int spin_delay_count;
} lwlock_stats;
static HTAB *lwlock_stats_htab;
static lwlock_stats lwlock_stats_dummy;
#endif
#ifdef LOCK_DEBUG
bool Trace_lwlocks = false;
inline static void
PRINT_LWDEBUG(const char *where, LWLock *lock, LWLockMode mode)
{
/* hide statement & context here, otherwise the log is just too verbose */
if (Trace_lwlocks)
{
uint32 state = pg_atomic_read_u32(&lock->state);
int id = T_ID(lock);
if (lock->tranche == 0 && id < NUM_INDIVIDUAL_LWLOCKS)
ereport(LOG,
(errhidestmt(true),
errhidecontext(true),
errmsg_internal("%d: %s(%s): excl %u shared %u haswaiters %u waiters %u rOK %d",
MyProcPid,
where, MainLWLockNames[id],
!!(state & LW_VAL_EXCLUSIVE),
state & LW_SHARED_MASK,
!!(state & LW_FLAG_HAS_WAITERS),
pg_atomic_read_u32(&lock->nwaiters),
!!(state & LW_FLAG_RELEASE_OK))));
else
ereport(LOG,
(errhidestmt(true),
errhidecontext(true),
errmsg_internal("%d: %s(%s %d): excl %u shared %u haswaiters %u waiters %u rOK %d",
MyProcPid,
where, T_NAME(lock), id,
!!(state & LW_VAL_EXCLUSIVE),
state & LW_SHARED_MASK,
!!(state & LW_FLAG_HAS_WAITERS),
pg_atomic_read_u32(&lock->nwaiters),
!!(state & LW_FLAG_RELEASE_OK))));
}
}
inline static void
LOG_LWDEBUG(const char *where, LWLock *lock, const char *msg)
{
/* hide statement & context here, otherwise the log is just too verbose */
if (Trace_lwlocks)
{
int id = T_ID(lock);
if (lock->tranche == 0 && id < NUM_INDIVIDUAL_LWLOCKS)
ereport(LOG,
(errhidestmt(true),
errhidecontext(true),
errmsg_internal("%s(%s): %s", where,
MainLWLockNames[id], msg)));
else
ereport(LOG,
(errhidestmt(true),
errhidecontext(true),
errmsg_internal("%s(%s %d): %s", where,
T_NAME(lock), id, msg)));
}
}
#else /* not LOCK_DEBUG */
#define PRINT_LWDEBUG(a,b,c) ((void)0)
#define LOG_LWDEBUG(a,b,c) ((void)0)
#endif /* LOCK_DEBUG */
#ifdef LWLOCK_STATS
static void init_lwlock_stats(void);
static void print_lwlock_stats(int code, Datum arg);
static lwlock_stats *get_lwlock_stats_entry(LWLock *lockid);
static void
init_lwlock_stats(void)
{
HASHCTL ctl;
static MemoryContext lwlock_stats_cxt = NULL;
static bool exit_registered = false;
if (lwlock_stats_cxt != NULL)
MemoryContextDelete(lwlock_stats_cxt);
/*
* The LWLock stats will be updated within a critical section, which
* requires allocating new hash entries. Allocations within a critical
* section are normally not allowed because running out of memory would
* lead to a PANIC, but LWLOCK_STATS is debugging code that's not normally
* turned on in production, so that's an acceptable risk. The hash entries
* are small, so the risk of running out of memory is minimal in practice.
*/
lwlock_stats_cxt = AllocSetContextCreate(TopMemoryContext,
"LWLock stats",
ALLOCSET_DEFAULT_MINSIZE,
ALLOCSET_DEFAULT_INITSIZE,
ALLOCSET_DEFAULT_MAXSIZE);
MemoryContextAllowInCriticalSection(lwlock_stats_cxt, true);
MemSet(&ctl, 0, sizeof(ctl));
ctl.keysize = sizeof(lwlock_stats_key);
ctl.entrysize = sizeof(lwlock_stats);
ctl.hcxt = lwlock_stats_cxt;
lwlock_stats_htab = hash_create("lwlock stats", 16384, &ctl,
Improve hash_create's API for selecting simple-binary-key hash functions. Previously, if you wanted anything besides C-string hash keys, you had to specify a custom hashing function to hash_create(). Nearly all such callers were specifying tag_hash or oid_hash; which is tedious, and rather error-prone, since a caller could easily miss the opportunity to optimize by using hash_uint32 when appropriate. Replace this with a design whereby callers using simple binary-data keys just specify HASH_BLOBS and don't need to mess with specific support functions. hash_create() itself will take care of optimizing when the key size is four bytes. This nets out saving a few hundred bytes of code space, and offers a measurable performance improvement in tidbitmap.c (which was not exploiting the opportunity to use hash_uint32 for its 4-byte keys). There might be some wins elsewhere too, I didn't analyze closely. In future we could look into offering a similar optimized hashing function for 8-byte keys. Under this design that could be done in a centralized and machine-independent fashion, whereas getting it right for keys of platform-dependent sizes would've been notationally painful before. For the moment, the old way still works fine, so as not to break source code compatibility for loadable modules. Eventually we might want to remove tag_hash and friends from the exported API altogether, since there's no real need for them to be explicitly referenced from outside dynahash.c. Teodor Sigaev and Tom Lane
11 years ago
HASH_ELEM | HASH_BLOBS | HASH_CONTEXT);
if (!exit_registered)
{
on_shmem_exit(print_lwlock_stats, 0);
exit_registered = true;
}
}
static void
print_lwlock_stats(int code, Datum arg)
{
HASH_SEQ_STATUS scan;
lwlock_stats *lwstats;
hash_seq_init(&scan, lwlock_stats_htab);
/* Grab an LWLock to keep different backends from mixing reports */
LWLockAcquire(&MainLWLockArray[0].lock, LW_EXCLUSIVE);
while ((lwstats = (lwlock_stats *) hash_seq_search(&scan)) != NULL)
{
fprintf(stderr,
"PID %d lwlock %s %d: shacq %u exacq %u blk %u spindelay %u dequeue self %u\n",
MyProcPid, LWLockTrancheArray[lwstats->key.tranche]->name,
lwstats->key.instance, lwstats->sh_acquire_count,
lwstats->ex_acquire_count, lwstats->block_count,
lwstats->spin_delay_count, lwstats->dequeue_self_count);
}
LWLockRelease(&MainLWLockArray[0].lock);
}
static lwlock_stats *
get_lwlock_stats_entry(LWLock *lock)
{
lwlock_stats_key key;
lwlock_stats *lwstats;
bool found;
/*
* During shared memory initialization, the hash table doesn't exist yet.
* Stats of that phase aren't very interesting, so just collect operations
* on all locks in a single dummy entry.
*/
if (lwlock_stats_htab == NULL)
return &lwlock_stats_dummy;
/* Fetch or create the entry. */
key.tranche = lock->tranche;
key.instance = T_ID(lock);
lwstats = hash_search(lwlock_stats_htab, &key, HASH_ENTER, &found);
if (!found)
{
lwstats->sh_acquire_count = 0;
lwstats->ex_acquire_count = 0;
lwstats->block_count = 0;
lwstats->dequeue_self_count = 0;
lwstats->spin_delay_count = 0;
}
return lwstats;
}
#endif /* LWLOCK_STATS */
/*
* Compute number of LWLocks required by named tranches. These will be
* allocated in the main array.
*/
static int
NumLWLocksByNamedTranches(void)
{
int numLocks = 0;
int i;
for (i = 0; i < NamedLWLockTrancheRequests; i++)
numLocks += NamedLWLockTrancheRequestArray[i].num_lwlocks;
return numLocks;
}
/*
* Compute shmem space needed for LWLocks and named tranches.
*/
Size
LWLockShmemSize(void)
{
Size size;
int i;
int numLocks = NUM_FIXED_LWLOCKS;
numLocks += NumLWLocksByNamedTranches();
/* Space for the LWLock array. */
size = mul_size(numLocks, sizeof(LWLockPadded));
/* Space for dynamic allocation counter, plus room for alignment. */
size = add_size(size, sizeof(int) + LWLOCK_PADDED_SIZE);
/* space for named tranches. */
size = add_size(size, mul_size(NamedLWLockTrancheRequests, sizeof(NamedLWLockTranche)));
/* space for name of each tranche. */
for (i = 0; i < NamedLWLockTrancheRequests; i++)
size = add_size(size, strlen(NamedLWLockTrancheRequestArray[i].tranche_name) + 1);
/* Disallow named LWLocks' requests after startup */
lock_named_request_allowed = false;
return size;
}
/*
* Allocate shmem space for the main LWLock array and all tranches and
* initialize it. We also register all the LWLock tranches here.
*/
void
CreateLWLocks(void)
{
StaticAssertExpr(LW_VAL_EXCLUSIVE > (uint32) MAX_BACKENDS,
"MAX_BACKENDS too big for lwlock.c");
StaticAssertExpr(sizeof(LWLock) <= LWLOCK_MINIMAL_SIZE &&
sizeof(LWLock) <= LWLOCK_PADDED_SIZE,
"Miscalculated LWLock padding");
if (!IsUnderPostmaster)
{
Size spaceLocks = LWLockShmemSize();
int *LWLockCounter;
char *ptr;
/* Allocate space */
ptr = (char *) ShmemAlloc(spaceLocks);
/* Leave room for dynamic allocation of tranches */
ptr += sizeof(int);
/* Ensure desired alignment of LWLock array */
ptr += LWLOCK_PADDED_SIZE - ((uintptr_t) ptr) % LWLOCK_PADDED_SIZE;
MainLWLockArray = (LWLockPadded *) ptr;
/*
* Initialize the dynamic-allocation counter for tranches, which is
* stored just before the first LWLock.
*/
LWLockCounter = (int *) ((char *) MainLWLockArray - sizeof(int));
*LWLockCounter = LWTRANCHE_FIRST_USER_DEFINED;
/* Initialize all LWLocks */
InitializeLWLocks();
}
/* Register all LWLock tranches */
RegisterLWLockTranches();
}
/*
* Initialize LWLocks that are fixed and those belonging to named tranches.
*/
static void
InitializeLWLocks(void)
{
int numNamedLocks = NumLWLocksByNamedTranches();
int id;
int i;
int j;
LWLockPadded *lock;
/* Initialize all individual LWLocks in main array */
for (id = 0, lock = MainLWLockArray; id < NUM_INDIVIDUAL_LWLOCKS; id++, lock++)
LWLockInitialize(&lock->lock, LWTRANCHE_MAIN);
/* Initialize buffer mapping LWLocks in main array */
lock = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS;
for (id = 0; id < NUM_BUFFER_PARTITIONS; id++, lock++)
LWLockInitialize(&lock->lock, LWTRANCHE_BUFFER_MAPPING);
/* Initialize lmgrs' LWLocks in main array */
lock = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS + NUM_BUFFER_PARTITIONS;
for (id = 0; id < NUM_LOCK_PARTITIONS; id++, lock++)
LWLockInitialize(&lock->lock, LWTRANCHE_LOCK_MANAGER);
/* Initialize predicate lmgrs' LWLocks in main array */
lock = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS +
NUM_BUFFER_PARTITIONS + NUM_LOCK_PARTITIONS;
for (id = 0; id < NUM_PREDICATELOCK_PARTITIONS; id++, lock++)
LWLockInitialize(&lock->lock, LWTRANCHE_PREDICATE_LOCK_MANAGER);
/* Initialize named tranches. */
if (NamedLWLockTrancheRequests > 0)
{
char *trancheNames;
NamedLWLockTrancheArray = (NamedLWLockTranche *)
&MainLWLockArray[NUM_FIXED_LWLOCKS + numNamedLocks];
trancheNames = (char *) NamedLWLockTrancheArray +
(NamedLWLockTrancheRequests * sizeof(NamedLWLockTranche));
lock = &MainLWLockArray[NUM_FIXED_LWLOCKS];
for (i = 0; i < NamedLWLockTrancheRequests; i++)
{
NamedLWLockTrancheRequest *request;
NamedLWLockTranche *tranche;
char *name;
request = &NamedLWLockTrancheRequestArray[i];
tranche = &NamedLWLockTrancheArray[i];
name = trancheNames;
trancheNames += strlen(request->tranche_name) + 1;
strcpy(name, request->tranche_name);
tranche->lwLockTranche.name = name;
tranche->trancheId = LWLockNewTrancheId();
tranche->lwLockTranche.array_base = lock;
tranche->lwLockTranche.array_stride = sizeof(LWLockPadded);
for (j = 0; j < request->num_lwlocks; j++, lock++)
LWLockInitialize(&lock->lock, tranche->trancheId);
}
}
}
/*
* Register named tranches and tranches for fixed LWLocks.
*/
static void
RegisterLWLockTranches(void)
{
int i;
if (LWLockTrancheArray == NULL)
{
LWLockTranchesAllocated = 32;
LWLockTrancheArray = (LWLockTranche **)
MemoryContextAllocZero(TopMemoryContext,
LWLockTranchesAllocated * sizeof(LWLockTranche *));
Assert(LWLockTranchesAllocated >= LWTRANCHE_FIRST_USER_DEFINED);
}
MainLWLockTranche.name = "main";
MainLWLockTranche.array_base = MainLWLockArray;
MainLWLockTranche.array_stride = sizeof(LWLockPadded);
LWLockRegisterTranche(LWTRANCHE_MAIN, &MainLWLockTranche);
BufMappingLWLockTranche.name = "buffer_mapping";
BufMappingLWLockTranche.array_base = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS;
BufMappingLWLockTranche.array_stride = sizeof(LWLockPadded);
LWLockRegisterTranche(LWTRANCHE_BUFFER_MAPPING, &BufMappingLWLockTranche);
LockManagerLWLockTranche.name = "lock_manager";
LockManagerLWLockTranche.array_base = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS +
NUM_BUFFER_PARTITIONS;
LockManagerLWLockTranche.array_stride = sizeof(LWLockPadded);
LWLockRegisterTranche(LWTRANCHE_LOCK_MANAGER, &LockManagerLWLockTranche);
PredicateLockManagerLWLockTranche.name = "predicate_lock_manager";
PredicateLockManagerLWLockTranche.array_base = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS +
NUM_BUFFER_PARTITIONS + NUM_LOCK_PARTITIONS;
PredicateLockManagerLWLockTranche.array_stride = sizeof(LWLockPadded);
LWLockRegisterTranche(LWTRANCHE_PREDICATE_LOCK_MANAGER, &PredicateLockManagerLWLockTranche);
/* Register named tranches. */
for (i = 0; i < NamedLWLockTrancheRequests; i++)
LWLockRegisterTranche(NamedLWLockTrancheArray[i].trancheId,
&NamedLWLockTrancheArray[i].lwLockTranche);
}
/*
* InitLWLockAccess - initialize backend-local state needed to hold LWLocks
*/
void
InitLWLockAccess(void)
{
#ifdef LWLOCK_STATS
init_lwlock_stats();
#endif
}
/*
* GetNamedLWLockTranche - returns the base address of LWLock from the
* specified tranche.
*
* Caller needs to retrieve the requested number of LWLocks starting from
* the base lock address returned by this API. This can be used for
* tranches that are requested by using RequestNamedLWLockTranche() API.
*/
LWLockPadded *
GetNamedLWLockTranche(const char *tranche_name)
{
int lock_pos;
int i;
/*
* Obtain the position of base address of LWLock belonging to requested
* tranche_name in MainLWLockArray. LWLocks for named tranches are placed
* in MainLWLockArray after fixed locks.
*/
lock_pos = NUM_FIXED_LWLOCKS;
for (i = 0; i < NamedLWLockTrancheRequests; i++)
{
if (strcmp(NamedLWLockTrancheRequestArray[i].tranche_name,
tranche_name) == 0)
return &MainLWLockArray[lock_pos];
lock_pos += NamedLWLockTrancheRequestArray[i].num_lwlocks;
}
if (i >= NamedLWLockTrancheRequests)
elog(ERROR, "requested tranche is not registered");
/* just to keep compiler quiet */
return NULL;
}
/*
* Allocate a new tranche ID.
*/
int
LWLockNewTrancheId(void)
{
int result;
int *LWLockCounter;
LWLockCounter = (int *) ((char *) MainLWLockArray - sizeof(int));
SpinLockAcquire(ShmemLock);
result = (*LWLockCounter)++;
SpinLockRelease(ShmemLock);
return result;
}
/*
* Register a tranche ID in the lookup table for the current process. This
* routine will save a pointer to the tranche object passed as an argument,
* so that object should be allocated in a backend-lifetime context
* (TopMemoryContext, static variable, or similar).
*/
void
LWLockRegisterTranche(int tranche_id, LWLockTranche *tranche)
{
Assert(LWLockTrancheArray != NULL);
if (tranche_id >= LWLockTranchesAllocated)
{
int i = LWLockTranchesAllocated;
int j = LWLockTranchesAllocated;
while (i <= tranche_id)
i *= 2;
LWLockTrancheArray = (LWLockTranche **)
repalloc(LWLockTrancheArray,
i * sizeof(LWLockTranche *));
LWLockTranchesAllocated = i;
while (j < LWLockTranchesAllocated)
LWLockTrancheArray[j++] = NULL;
}
LWLockTrancheArray[tranche_id] = tranche;
}
/*
* RequestNamedLWLockTranche
* Request that extra LWLocks be allocated during postmaster
* startup.
*
* This is only useful for extensions if called from the _PG_init hook
* of a library that is loaded into the postmaster via
* shared_preload_libraries. Once shared memory has been allocated, calls
* will be ignored. (We could raise an error, but it seems better to make
* it a no-op, so that libraries containing such calls can be reloaded if
* needed.)
*/
void
RequestNamedLWLockTranche(const char *tranche_name, int num_lwlocks)
{
NamedLWLockTrancheRequest *request;
if (IsUnderPostmaster || !lock_named_request_allowed)
return; /* too late */
if (NamedLWLockTrancheRequestArray == NULL)
{
NamedLWLockTrancheRequestsAllocated = 16;
NamedLWLockTrancheRequestArray = (NamedLWLockTrancheRequest *)
MemoryContextAlloc(TopMemoryContext,
NamedLWLockTrancheRequestsAllocated
* sizeof(NamedLWLockTrancheRequest));
}
if (NamedLWLockTrancheRequests >= NamedLWLockTrancheRequestsAllocated)
{
int i = NamedLWLockTrancheRequestsAllocated;
while (i <= NamedLWLockTrancheRequests)
i *= 2;
NamedLWLockTrancheRequestArray = (NamedLWLockTrancheRequest *)
repalloc(NamedLWLockTrancheRequestArray,
i * sizeof(NamedLWLockTrancheRequest));
NamedLWLockTrancheRequestsAllocated = i;
}
request = &NamedLWLockTrancheRequestArray[NamedLWLockTrancheRequests];
Assert(strlen(tranche_name) + 1 < NAMEDATALEN);
StrNCpy(request->tranche_name, tranche_name, NAMEDATALEN);
request->num_lwlocks = num_lwlocks;
NamedLWLockTrancheRequests++;
}
/*
* LWLockInitialize - initialize a new lwlock; it's initially unlocked
*/
void
LWLockInitialize(LWLock *lock, int tranche_id)
{
SpinLockInit(&lock->mutex);
pg_atomic_init_u32(&lock->state, LW_FLAG_RELEASE_OK);
#ifdef LOCK_DEBUG
pg_atomic_init_u32(&lock->nwaiters, 0);
#endif
lock->tranche = tranche_id;
dlist_init(&lock->waiters);
}
/*
* Report start of wait event for light-weight locks.
*
* This function will be used by all the light-weight lock calls which
* needs to wait to acquire the lock. This function distinguishes wait
* event based on tranche and lock id.
*/
static inline void
LWLockReportWaitStart(LWLock *lock)
{
int lockId = T_ID(lock);
if (lock->tranche == 0)
pgstat_report_wait_start(WAIT_LWLOCK_NAMED, (uint16) lockId);
else
pgstat_report_wait_start(WAIT_LWLOCK_TRANCHE, lock->tranche);
}
/*
* Report end of wait event for light-weight locks.
*/
static inline void
LWLockReportWaitEnd()
{
pgstat_report_wait_end();
}
/*
* Return an identifier for an LWLock based on the wait class and event.
*/
const char *
GetLWLockIdentifier(uint8 classId, uint16 eventId)
{
if (classId == WAIT_LWLOCK_NAMED)
return MainLWLockNames[eventId];
Assert(classId == WAIT_LWLOCK_TRANCHE);
/*
* It is quite possible that user has registered tranche in one of the
* backends (e.g. by allocating lwlocks in dynamic shared memory) but
* not all of them, so we can't assume the tranche is registered here.
*/
if (eventId >= LWLockTranchesAllocated ||
LWLockTrancheArray[eventId]->name == NULL)
return "extension";
return LWLockTrancheArray[eventId]->name;
}
/*
* Internal function that tries to atomically acquire the lwlock in the passed
* in mode.
*
* This function will not block waiting for a lock to become free - that's the
* callers job.
*
* Returns true if the lock isn't free and we need to wait.
*/
static bool
LWLockAttemptLock(LWLock *lock, LWLockMode mode)
{
uint32 old_state;
AssertArg(mode == LW_EXCLUSIVE || mode == LW_SHARED);
/*
* Read once outside the loop, later iterations will get the newer value
* via compare & exchange.
*/
old_state = pg_atomic_read_u32(&lock->state);
/* loop until we've determined whether we could acquire the lock or not */
while (true)
{
uint32 desired_state;
bool lock_free;
desired_state = old_state;
if (mode == LW_EXCLUSIVE)
{
lock_free = (old_state & LW_LOCK_MASK) == 0;
if (lock_free)
desired_state += LW_VAL_EXCLUSIVE;
}
else
{
lock_free = (old_state & LW_VAL_EXCLUSIVE) == 0;
if (lock_free)
desired_state += LW_VAL_SHARED;
}
/*
* Attempt to swap in the state we are expecting. If we didn't see
* lock to be free, that's just the old value. If we saw it as free,
* we'll attempt to mark it acquired. The reason that we always swap
* in the value is that this doubles as a memory barrier. We could try
* to be smarter and only swap in values if we saw the lock as free,
* but benchmark haven't shown it as beneficial so far.
*
* Retry if the value changed since we last looked at it.
*/
if (pg_atomic_compare_exchange_u32(&lock->state,
&old_state, desired_state))
{
if (lock_free)
{
/* Great! Got the lock. */
#ifdef LOCK_DEBUG
if (mode == LW_EXCLUSIVE)
lock->owner = MyProc;
#endif
return false;
}
else
return true; /* someobdy else has the lock */
}
}
pg_unreachable();
}
/*
* Wakeup all the lockers that currently have a chance to acquire the lock.
*/
static void
LWLockWakeup(LWLock *lock)
{
bool new_release_ok;
bool wokeup_somebody = false;
dlist_head wakeup;
dlist_mutable_iter iter;
#ifdef LWLOCK_STATS
lwlock_stats *lwstats;
lwstats = get_lwlock_stats_entry(lock);
#endif
dlist_init(&wakeup);
new_release_ok = true;
/* Acquire mutex. Time spent holding mutex should be short! */
#ifdef LWLOCK_STATS
lwstats->spin_delay_count += SpinLockAcquire(&lock->mutex);
#else
SpinLockAcquire(&lock->mutex);
#endif
dlist_foreach_modify(iter, &lock->waiters)
{
PGPROC *waiter = dlist_container(PGPROC, lwWaitLink, iter.cur);
if (wokeup_somebody && waiter->lwWaitMode == LW_EXCLUSIVE)
continue;
dlist_delete(&waiter->lwWaitLink);
dlist_push_tail(&wakeup, &waiter->lwWaitLink);
if (waiter->lwWaitMode != LW_WAIT_UNTIL_FREE)
{
/*
* Prevent additional wakeups until retryer gets to run. Backends
* that are just waiting for the lock to become free don't retry
* automatically.
*/
new_release_ok = false;
/*
* Don't wakeup (further) exclusive locks.
*/
wokeup_somebody = true;
}
/*
* Once we've woken up an exclusive lock, there's no point in waking
* up anybody else.
*/
if (waiter->lwWaitMode == LW_EXCLUSIVE)
break;
}
Assert(dlist_is_empty(&wakeup) || pg_atomic_read_u32(&lock->state) & LW_FLAG_HAS_WAITERS);
/* Unset both flags at once if required */
if (!new_release_ok && dlist_is_empty(&wakeup))
pg_atomic_fetch_and_u32(&lock->state,
~(LW_FLAG_RELEASE_OK | LW_FLAG_HAS_WAITERS));
else if (!new_release_ok)
pg_atomic_fetch_and_u32(&lock->state, ~LW_FLAG_RELEASE_OK);
else if (dlist_is_empty(&wakeup))
pg_atomic_fetch_and_u32(&lock->state, ~LW_FLAG_HAS_WAITERS);
else if (new_release_ok)
pg_atomic_fetch_or_u32(&lock->state, LW_FLAG_RELEASE_OK);
/* We are done updating the shared state of the lock queue. */
SpinLockRelease(&lock->mutex);
/* Awaken any waiters I removed from the queue. */
dlist_foreach_modify(iter, &wakeup)
{
PGPROC *waiter = dlist_container(PGPROC, lwWaitLink, iter.cur);
LOG_LWDEBUG("LWLockRelease", lock, "release waiter");
dlist_delete(&waiter->lwWaitLink);
/*
* Guarantee that lwWaiting being unset only becomes visible once the
* unlink from the link has completed. Otherwise the target backend
* could be woken up for other reason and enqueue for a new lock - if
* that happens before the list unlink happens, the list would end up
* being corrupted.
*
* The barrier pairs with the SpinLockAcquire() when enqueing for
* another lock.
*/
pg_write_barrier();
waiter->lwWaiting = false;
PGSemaphoreUnlock(&waiter->sem);
}
}
/*
* Add ourselves to the end of the queue.
*
* NB: Mode can be LW_WAIT_UNTIL_FREE here!
*/
static void
LWLockQueueSelf(LWLock *lock, LWLockMode mode)
{
#ifdef LWLOCK_STATS
lwlock_stats *lwstats;
lwstats = get_lwlock_stats_entry(lock);
#endif
/*
* If we don't have a PGPROC structure, there's no way to wait. This
* should never occur, since MyProc should only be null during shared
* memory initialization.
*/
if (MyProc == NULL)
elog(PANIC, "cannot wait without a PGPROC structure");
if (MyProc->lwWaiting)
elog(PANIC, "queueing for lock while waiting on another one");
#ifdef LWLOCK_STATS
lwstats->spin_delay_count += SpinLockAcquire(&lock->mutex);
#else
SpinLockAcquire(&lock->mutex);
#endif
/* setting the flag is protected by the spinlock */
pg_atomic_fetch_or_u32(&lock->state, LW_FLAG_HAS_WAITERS);
MyProc->lwWaiting = true;
MyProc->lwWaitMode = mode;
/* LW_WAIT_UNTIL_FREE waiters are always at the front of the queue */
if (mode == LW_WAIT_UNTIL_FREE)
dlist_push_head(&lock->waiters, &MyProc->lwWaitLink);
else
dlist_push_tail(&lock->waiters, &MyProc->lwWaitLink);
/* Can release the mutex now */
SpinLockRelease(&lock->mutex);
#ifdef LOCK_DEBUG
pg_atomic_fetch_add_u32(&lock->nwaiters, 1);
#endif
}
/*
* Remove ourselves from the waitlist.
*
* This is used if we queued ourselves because we thought we needed to sleep
* but, after further checking, we discovered that we don't actually need to
* do so.
*/
static void
LWLockDequeueSelf(LWLock *lock)
{
bool found = false;
dlist_mutable_iter iter;
#ifdef LWLOCK_STATS
lwlock_stats *lwstats;
lwstats = get_lwlock_stats_entry(lock);
lwstats->dequeue_self_count++;
#endif
#ifdef LWLOCK_STATS
lwstats->spin_delay_count += SpinLockAcquire(&lock->mutex);
#else
SpinLockAcquire(&lock->mutex);
#endif
/*
* Can't just remove ourselves from the list, but we need to iterate over
* all entries as somebody else could have unqueued us.
*/
dlist_foreach_modify(iter, &lock->waiters)
{
PGPROC *proc = dlist_container(PGPROC, lwWaitLink, iter.cur);
if (proc == MyProc)
{
found = true;
dlist_delete(&proc->lwWaitLink);
break;
}
}
if (dlist_is_empty(&lock->waiters) &&
(pg_atomic_read_u32(&lock->state) & LW_FLAG_HAS_WAITERS) != 0)
{
pg_atomic_fetch_and_u32(&lock->state, ~LW_FLAG_HAS_WAITERS);
}
SpinLockRelease(&lock->mutex);
/* clear waiting state again, nice for debugging */
if (found)
MyProc->lwWaiting = false;
else
{
int extraWaits = 0;
/*
* Somebody else dequeued us and has or will wake us up. Deal with the
* superfluous absorption of a wakeup.
*/
/*
* Reset releaseOk if somebody woke us before we removed ourselves -
* they'll have set it to false.
*/
pg_atomic_fetch_or_u32(&lock->state, LW_FLAG_RELEASE_OK);
/*
* Now wait for the scheduled wakeup, otherwise our ->lwWaiting would
* get reset at some inconvenient point later. Most of the time this
* will immediately return.
*/
for (;;)
{
PGSemaphoreLock(&MyProc->sem);
if (!MyProc->lwWaiting)
break;
extraWaits++;
}
/*
* Fix the process wait semaphore's count for any absorbed wakeups.
*/
while (extraWaits-- > 0)
PGSemaphoreUnlock(&MyProc->sem);
}
#ifdef LOCK_DEBUG
{
/* not waiting anymore */
uint32 nwaiters PG_USED_FOR_ASSERTS_ONLY = pg_atomic_fetch_sub_u32(&lock->nwaiters, 1);
Assert(nwaiters < MAX_BACKENDS);
}
#endif
}
/*
* LWLockAcquire - acquire a lightweight lock in the specified mode
*
* If the lock is not available, sleep until it is. Returns true if the lock
* was available immediately, false if we had to sleep.
*
* Side effect: cancel/die interrupts are held off until lock release.
*/
bool
LWLockAcquire(LWLock *lock, LWLockMode mode)
{
PGPROC *proc = MyProc;
bool result = true;
int extraWaits = 0;
#ifdef LWLOCK_STATS
lwlock_stats *lwstats;
lwstats = get_lwlock_stats_entry(lock);
#endif
AssertArg(mode == LW_SHARED || mode == LW_EXCLUSIVE);
PRINT_LWDEBUG("LWLockAcquire", lock, mode);
#ifdef LWLOCK_STATS
/* Count lock acquisition attempts */
if (mode == LW_EXCLUSIVE)
lwstats->ex_acquire_count++;
else
lwstats->sh_acquire_count++;
#endif /* LWLOCK_STATS */
/*
* We can't wait if we haven't got a PGPROC. This should only occur
* during bootstrap or shared memory initialization. Put an Assert here
* to catch unsafe coding practices.
*/
Assert(!(proc == NULL && IsUnderPostmaster));
/* Ensure we will have room to remember the lock */
if (num_held_lwlocks >= MAX_SIMUL_LWLOCKS)
elog(ERROR, "too many LWLocks taken");
/*
* Lock out cancel/die interrupts until we exit the code section protected
* by the LWLock. This ensures that interrupts will not interfere with
* manipulations of data structures in shared memory.
*/
HOLD_INTERRUPTS();
/*
23 years ago
* Loop here to try to acquire lock after each time we are signaled by
* LWLockRelease.
*
23 years ago
* NOTE: it might seem better to have LWLockRelease actually grant us the
* lock, rather than retrying and possibly having to go back to sleep. But
* in practice that is no good because it means a process swap for every
* lock acquisition when two or more processes are contending for the same
* lock. Since LWLocks are normally used to protect not-very-long
* sections of computation, a process needs to be able to acquire and
* release the same lock many times during a single CPU time slice, even
* in the presence of contention. The efficiency of being able to do that
* outweighs the inefficiency of sometimes wasting a process dispatch
* cycle because the lock is not free when a released waiter finally gets
* to run. See pgsql-hackers archives for 29-Dec-01.
*/
for (;;)
{
bool mustwait;
/*
* Try to grab the lock the first time, we're not in the waitqueue
* yet/anymore.
*/
mustwait = LWLockAttemptLock(lock, mode);
if (!mustwait)
{
LOG_LWDEBUG("LWLockAcquire", lock, "immediately acquired lock");
break; /* got the lock */
}
/*
* Ok, at this point we couldn't grab the lock on the first try. We
* cannot simply queue ourselves to the end of the list and wait to be
* woken up because by now the lock could long have been released.
* Instead add us to the queue and try to grab the lock again. If we
* succeed we need to revert the queuing and be happy, otherwise we
* recheck the lock. If we still couldn't grab it, we know that the
* other lock will see our queue entries when releasing since they
* existed before we checked for the lock.
*/
/* add to the queue */
LWLockQueueSelf(lock, mode);
/* we're now guaranteed to be woken up if necessary */
mustwait = LWLockAttemptLock(lock, mode);
/* ok, grabbed the lock the second time round, need to undo queueing */
if (!mustwait)
{
LOG_LWDEBUG("LWLockAcquire", lock, "acquired, undoing queue");
LWLockDequeueSelf(lock);
break;
}
/*
* Wait until awakened.
*
* Since we share the process wait semaphore with the regular lock
* manager and ProcWaitForSignal, and we may need to acquire an LWLock
* while one of those is pending, it is possible that we get awakened
* for a reason other than being signaled by LWLockRelease. If so,
* loop back and wait again. Once we've gotten the LWLock,
* re-increment the sema by the number of additional signals received,
* so that the lock manager or signal manager will see the received
* signal when it next waits.
*/
LOG_LWDEBUG("LWLockAcquire", lock, "waiting");
#ifdef LWLOCK_STATS
lwstats->block_count++;
#endif
LWLockReportWaitStart(lock);
TRACE_POSTGRESQL_LWLOCK_WAIT_START(T_NAME(lock), T_ID(lock), mode);
for (;;)
{
PGSemaphoreLock(&proc->sem);
if (!proc->lwWaiting)
break;
extraWaits++;
}
/* Retrying, allow LWLockRelease to release waiters again. */
pg_atomic_fetch_or_u32(&lock->state, LW_FLAG_RELEASE_OK);
#ifdef LOCK_DEBUG
{
/* not waiting anymore */
uint32 nwaiters PG_USED_FOR_ASSERTS_ONLY = pg_atomic_fetch_sub_u32(&lock->nwaiters, 1);
Assert(nwaiters < MAX_BACKENDS);
}
#endif
TRACE_POSTGRESQL_LWLOCK_WAIT_DONE(T_NAME(lock), T_ID(lock), mode);
LWLockReportWaitEnd();
LOG_LWDEBUG("LWLockAcquire", lock, "awakened");
/* Now loop back and try to acquire lock again. */
result = false;
}
TRACE_POSTGRESQL_LWLOCK_ACQUIRE(T_NAME(lock), T_ID(lock), mode);
/* Add lock to list of locks held by this backend */
held_lwlocks[num_held_lwlocks].lock = lock;
held_lwlocks[num_held_lwlocks++].mode = mode;
/*
* Fix the process wait semaphore's count for any absorbed wakeups.
*/
while (extraWaits-- > 0)
PGSemaphoreUnlock(&proc->sem);
return result;
}
/*
* LWLockConditionalAcquire - acquire a lightweight lock in the specified mode
*
* If the lock is not available, return FALSE with no side-effects.
*
* If successful, cancel/die interrupts are held off until lock release.
*/
bool
LWLockConditionalAcquire(LWLock *lock, LWLockMode mode)
{
bool mustwait;
AssertArg(mode == LW_SHARED || mode == LW_EXCLUSIVE);
PRINT_LWDEBUG("LWLockConditionalAcquire", lock, mode);
/* Ensure we will have room to remember the lock */
if (num_held_lwlocks >= MAX_SIMUL_LWLOCKS)
elog(ERROR, "too many LWLocks taken");
/*
* Lock out cancel/die interrupts until we exit the code section protected
* by the LWLock. This ensures that interrupts will not interfere with
* manipulations of data structures in shared memory.
*/
HOLD_INTERRUPTS();
/* Check for the lock */
mustwait = LWLockAttemptLock(lock, mode);
if (mustwait)
{
/* Failed to get lock, so release interrupt holdoff */
RESUME_INTERRUPTS();
LOG_LWDEBUG("LWLockConditionalAcquire", lock, "failed");
TRACE_POSTGRESQL_LWLOCK_CONDACQUIRE_FAIL(T_NAME(lock), T_ID(lock), mode);
}
else
{
/* Add lock to list of locks held by this backend */
held_lwlocks[num_held_lwlocks].lock = lock;
held_lwlocks[num_held_lwlocks++].mode = mode;
TRACE_POSTGRESQL_LWLOCK_CONDACQUIRE(T_NAME(lock), T_ID(lock), mode);
}
return !mustwait;
}
/*
* LWLockAcquireOrWait - Acquire lock, or wait until it's free
*
* The semantics of this function are a bit funky. If the lock is currently
* free, it is acquired in the given mode, and the function returns true. If
* the lock isn't immediately free, the function waits until it is released
* and returns false, but does not acquire the lock.
*
* This is currently used for WALWriteLock: when a backend flushes the WAL,
* holding WALWriteLock, it can flush the commit records of many other
* backends as a side-effect. Those other backends need to wait until the
* flush finishes, but don't need to acquire the lock anymore. They can just
* wake up, observe that their records have already been flushed, and return.
*/
bool
LWLockAcquireOrWait(LWLock *lock, LWLockMode mode)
{
PGPROC *proc = MyProc;
bool mustwait;
int extraWaits = 0;
#ifdef LWLOCK_STATS
lwlock_stats *lwstats;
lwstats = get_lwlock_stats_entry(lock);
#endif
Assert(mode == LW_SHARED || mode == LW_EXCLUSIVE);
PRINT_LWDEBUG("LWLockAcquireOrWait", lock, mode);
/* Ensure we will have room to remember the lock */
if (num_held_lwlocks >= MAX_SIMUL_LWLOCKS)
elog(ERROR, "too many LWLocks taken");
/*
* Lock out cancel/die interrupts until we exit the code section protected
* by the LWLock. This ensures that interrupts will not interfere with
* manipulations of data structures in shared memory.
*/
HOLD_INTERRUPTS();
/*
* NB: We're using nearly the same twice-in-a-row lock acquisition
* protocol as LWLockAcquire(). Check its comments for details.
*/
mustwait = LWLockAttemptLock(lock, mode);
if (mustwait)
{
LWLockQueueSelf(lock, LW_WAIT_UNTIL_FREE);
mustwait = LWLockAttemptLock(lock, mode);
if (mustwait)
{
/*
* Wait until awakened. Like in LWLockAcquire, be prepared for
* bogus wakeups, because we share the semaphore with
* ProcWaitForSignal.
*/
LOG_LWDEBUG("LWLockAcquireOrWait", lock, "waiting");
#ifdef LWLOCK_STATS
lwstats->block_count++;
#endif
LWLockReportWaitStart(lock);
TRACE_POSTGRESQL_LWLOCK_WAIT_START(T_NAME(lock), T_ID(lock), mode);
for (;;)
{
PGSemaphoreLock(&proc->sem);
if (!proc->lwWaiting)
break;
extraWaits++;
}
#ifdef LOCK_DEBUG
{
/* not waiting anymore */
uint32 nwaiters PG_USED_FOR_ASSERTS_ONLY = pg_atomic_fetch_sub_u32(&lock->nwaiters, 1);
Assert(nwaiters < MAX_BACKENDS);
}
#endif
TRACE_POSTGRESQL_LWLOCK_WAIT_DONE(T_NAME(lock), T_ID(lock), mode);
LWLockReportWaitEnd();
LOG_LWDEBUG("LWLockAcquireOrWait", lock, "awakened");
}
else
{
LOG_LWDEBUG("LWLockAcquireOrWait", lock, "acquired, undoing queue");
/*
* Got lock in the second attempt, undo queueing. We need to treat
* this as having successfully acquired the lock, otherwise we'd
* not necessarily wake up people we've prevented from acquiring
* the lock.
*/
LWLockDequeueSelf(lock);
}
}
/*
* Fix the process wait semaphore's count for any absorbed wakeups.
*/
while (extraWaits-- > 0)
PGSemaphoreUnlock(&proc->sem);
if (mustwait)
{
/* Failed to get lock, so release interrupt holdoff */
RESUME_INTERRUPTS();
LOG_LWDEBUG("LWLockAcquireOrWait", lock, "failed");
TRACE_POSTGRESQL_LWLOCK_ACQUIRE_OR_WAIT_FAIL(T_NAME(lock), T_ID(lock),
mode);
}
else
{
LOG_LWDEBUG("LWLockAcquireOrWait", lock, "succeeded");
/* Add lock to list of locks held by this backend */
held_lwlocks[num_held_lwlocks].lock = lock;
held_lwlocks[num_held_lwlocks++].mode = mode;
TRACE_POSTGRESQL_LWLOCK_ACQUIRE_OR_WAIT(T_NAME(lock), T_ID(lock), mode);
}
return !mustwait;
}
/*
* Does the lwlock in its current state need to wait for the variable value to
* change?
*
* If we don't need to wait, and it's because the value of the variable has
* changed, store the current value in newval.
*
* *result is set to true if the lock was free, and false otherwise.
*/
static bool
LWLockConflictsWithVar(LWLock *lock,
uint64 *valptr, uint64 oldval, uint64 *newval,
bool *result)
{
bool mustwait;
uint64 value;
#ifdef LWLOCK_STATS
lwlock_stats *lwstats;
lwstats = get_lwlock_stats_entry(lock);
#endif
/*
* Test first to see if it the slot is free right now.
*
* XXX: the caller uses a spinlock before this, so we don't need a memory
* barrier here as far as the current usage is concerned. But that might
* not be safe in general.
*/
mustwait = (pg_atomic_read_u32(&lock->state) & LW_VAL_EXCLUSIVE) != 0;
if (!mustwait)
{
*result = true;
return false;
}
*result = false;
/*
* Read value using spinlock as we can't rely on atomic 64 bit
* reads/stores. TODO: On platforms with a way to do atomic 64 bit
* reads/writes the spinlock could be optimized away.
*/
#ifdef LWLOCK_STATS
lwstats->spin_delay_count += SpinLockAcquire(&lock->mutex);
#else
SpinLockAcquire(&lock->mutex);
#endif
value = *valptr;
SpinLockRelease(&lock->mutex);
if (value != oldval)
{
mustwait = false;
*newval = value;
}
else
{
mustwait = true;
}
return mustwait;
}
/*
* LWLockWaitForVar - Wait until lock is free, or a variable is updated.
*
* If the lock is held and *valptr equals oldval, waits until the lock is
* either freed, or the lock holder updates *valptr by calling
* LWLockUpdateVar. If the lock is free on exit (immediately or after
* waiting), returns true. If the lock is still held, but *valptr no longer
* matches oldval, returns false and sets *newval to the current value in
* *valptr.
*
* Note: this function ignores shared lock holders; if the lock is held
* in shared mode, returns 'true'.
*/
bool
LWLockWaitForVar(LWLock *lock, uint64 *valptr, uint64 oldval, uint64 *newval)
{
PGPROC *proc = MyProc;
int extraWaits = 0;
bool result = false;
#ifdef LWLOCK_STATS
lwlock_stats *lwstats;
lwstats = get_lwlock_stats_entry(lock);
#endif
PRINT_LWDEBUG("LWLockWaitForVar", lock, LW_WAIT_UNTIL_FREE);
/*
* Lock out cancel/die interrupts while we sleep on the lock. There is no
* cleanup mechanism to remove us from the wait queue if we got
* interrupted.
*/
HOLD_INTERRUPTS();
/*
* Loop here to check the lock's status after each time we are signaled.
*/
for (;;)
{
bool mustwait;
mustwait = LWLockConflictsWithVar(lock, valptr, oldval, newval,
&result);
if (!mustwait)
break; /* the lock was free or value didn't match */
/*
* Add myself to wait queue. Note that this is racy, somebody else
* could wakeup before we're finished queuing. NB: We're using nearly
* the same twice-in-a-row lock acquisition protocol as
* LWLockAcquire(). Check its comments for details. The only
* difference is that we also have to check the variable's values when
* checking the state of the lock.
*/
LWLockQueueSelf(lock, LW_WAIT_UNTIL_FREE);
/*
* Set RELEASE_OK flag, to make sure we get woken up as soon as the
* lock is released.
*/
pg_atomic_fetch_or_u32(&lock->state, LW_FLAG_RELEASE_OK);
/*
* We're now guaranteed to be woken up if necessary. Recheck the lock
* and variables state.
*/
mustwait = LWLockConflictsWithVar(lock, valptr, oldval, newval,
&result);
/* Ok, no conflict after we queued ourselves. Undo queueing. */
if (!mustwait)
{
LOG_LWDEBUG("LWLockWaitForVar", lock, "free, undoing queue");
LWLockDequeueSelf(lock);
break;
}
/*
* Wait until awakened.
*
* Since we share the process wait semaphore with the regular lock
* manager and ProcWaitForSignal, and we may need to acquire an LWLock
* while one of those is pending, it is possible that we get awakened
* for a reason other than being signaled by LWLockRelease. If so,
* loop back and wait again. Once we've gotten the LWLock,
* re-increment the sema by the number of additional signals received,
* so that the lock manager or signal manager will see the received
* signal when it next waits.
*/
LOG_LWDEBUG("LWLockWaitForVar", lock, "waiting");
#ifdef LWLOCK_STATS
lwstats->block_count++;
#endif
LWLockReportWaitStart(lock);
TRACE_POSTGRESQL_LWLOCK_WAIT_START(T_NAME(lock), T_ID(lock),
LW_EXCLUSIVE);
for (;;)
{
PGSemaphoreLock(&proc->sem);
if (!proc->lwWaiting)
break;
extraWaits++;
}
#ifdef LOCK_DEBUG
{
/* not waiting anymore */
uint32 nwaiters PG_USED_FOR_ASSERTS_ONLY = pg_atomic_fetch_sub_u32(&lock->nwaiters, 1);
Assert(nwaiters < MAX_BACKENDS);
}
#endif
TRACE_POSTGRESQL_LWLOCK_WAIT_DONE(T_NAME(lock), T_ID(lock),
LW_EXCLUSIVE);
LWLockReportWaitEnd();
LOG_LWDEBUG("LWLockWaitForVar", lock, "awakened");
/* Now loop back and check the status of the lock again. */
}
TRACE_POSTGRESQL_LWLOCK_ACQUIRE(T_NAME(lock), T_ID(lock), LW_EXCLUSIVE);
/*
* Fix the process wait semaphore's count for any absorbed wakeups.
*/
while (extraWaits-- > 0)
PGSemaphoreUnlock(&proc->sem);
/*
* Now okay to allow cancel/die interrupts.
*/
RESUME_INTERRUPTS();
return result;
}
/*
* LWLockUpdateVar - Update a variable and wake up waiters atomically
*
* Sets *valptr to 'val', and wakes up all processes waiting for us with
* LWLockWaitForVar(). Setting the value and waking up the processes happen
* atomically so that any process calling LWLockWaitForVar() on the same lock
* is guaranteed to see the new value, and act accordingly.
*
* The caller must be holding the lock in exclusive mode.
*/
void
LWLockUpdateVar(LWLock *lock, uint64 *valptr, uint64 val)
{
dlist_head wakeup;
dlist_mutable_iter iter;
#ifdef LWLOCK_STATS
lwlock_stats *lwstats;
lwstats = get_lwlock_stats_entry(lock);
#endif
PRINT_LWDEBUG("LWLockUpdateVar", lock, LW_EXCLUSIVE);
dlist_init(&wakeup);
/* Acquire mutex. Time spent holding mutex should be short! */
#ifdef LWLOCK_STATS
lwstats->spin_delay_count += SpinLockAcquire(&lock->mutex);
#else
SpinLockAcquire(&lock->mutex);
#endif
Assert(pg_atomic_read_u32(&lock->state) & LW_VAL_EXCLUSIVE);
/* Update the lock's value */
*valptr = val;
/*
* See if there are any LW_WAIT_UNTIL_FREE waiters that need to be woken
* up. They are always in the front of the queue.
*/
dlist_foreach_modify(iter, &lock->waiters)
{
PGPROC *waiter = dlist_container(PGPROC, lwWaitLink, iter.cur);
if (waiter->lwWaitMode != LW_WAIT_UNTIL_FREE)
break;
dlist_delete(&waiter->lwWaitLink);
dlist_push_tail(&wakeup, &waiter->lwWaitLink);
}
/* We are done updating shared state of the lock itself. */
SpinLockRelease(&lock->mutex);
/*
* Awaken any waiters I removed from the queue.
*/
dlist_foreach_modify(iter, &wakeup)
{
PGPROC *waiter = dlist_container(PGPROC, lwWaitLink, iter.cur);
dlist_delete(&waiter->lwWaitLink);
/* check comment in LWLockWakeup() about this barrier */
pg_write_barrier();
waiter->lwWaiting = false;
PGSemaphoreUnlock(&waiter->sem);
}
}
/*
* LWLockRelease - release a previously acquired lock
*/
void
LWLockRelease(LWLock *lock)
{
LWLockMode mode;
uint32 oldstate;
bool check_waiters;
int i;
/*
* Remove lock from list of locks held. Usually, but not always, it will
* be the latest-acquired lock; so search array backwards.
*/
for (i = num_held_lwlocks; --i >= 0;)
{
if (lock == held_lwlocks[i].lock)
{
mode = held_lwlocks[i].mode;
break;
}
}
if (i < 0)
elog(ERROR, "lock %s %d is not held", T_NAME(lock), T_ID(lock));
num_held_lwlocks--;
for (; i < num_held_lwlocks; i++)
held_lwlocks[i] = held_lwlocks[i + 1];
PRINT_LWDEBUG("LWLockRelease", lock, mode);
/*
* Release my hold on lock, after that it can immediately be acquired by
* others, even if we still have to wakeup other waiters.
*/
if (mode == LW_EXCLUSIVE)
oldstate = pg_atomic_sub_fetch_u32(&lock->state, LW_VAL_EXCLUSIVE);
else
oldstate = pg_atomic_sub_fetch_u32(&lock->state, LW_VAL_SHARED);
/* nobody else can have that kind of lock */
Assert(!(oldstate & LW_VAL_EXCLUSIVE));
/*
* We're still waiting for backends to get scheduled, don't wake them up
* again.
*/
if ((oldstate & (LW_FLAG_HAS_WAITERS | LW_FLAG_RELEASE_OK)) ==
(LW_FLAG_HAS_WAITERS | LW_FLAG_RELEASE_OK) &&
(oldstate & LW_LOCK_MASK) == 0)
check_waiters = true;
else
check_waiters = false;
/*
* As waking up waiters requires the spinlock to be acquired, only do so
* if necessary.
*/
if (check_waiters)
{
/* XXX: remove before commit? */
LOG_LWDEBUG("LWLockRelease", lock, "releasing waiters");
LWLockWakeup(lock);
}
TRACE_POSTGRESQL_LWLOCK_RELEASE(T_NAME(lock), T_ID(lock));
/*
* Now okay to allow cancel/die interrupts.
*/
RESUME_INTERRUPTS();
}
/*
* LWLockReleaseClearVar - release a previously acquired lock, reset variable
*/
void
LWLockReleaseClearVar(LWLock *lock, uint64 *valptr, uint64 val)
{
#ifdef LWLOCK_STATS
lwlock_stats *lwstats;
lwstats = get_lwlock_stats_entry(lock);
lwstats->spin_delay_count += SpinLockAcquire(&lock->mutex);
#else
SpinLockAcquire(&lock->mutex);
#endif
/*
* Set the variable's value before releasing the lock, that prevents race
* a race condition wherein a new locker acquires the lock, but hasn't yet
* set the variables value.
*/
*valptr = val;
SpinLockRelease(&lock->mutex);
LWLockRelease(lock);
}
/*
* LWLockReleaseAll - release all currently-held locks
*
* Used to clean up after ereport(ERROR). An important difference between this
* function and retail LWLockRelease calls is that InterruptHoldoffCount is
* unchanged by this operation. This is necessary since InterruptHoldoffCount
* has been set to an appropriate level earlier in error recovery. We could
* decrement it below zero if we allow it to drop for each released lock!
*/
void
LWLockReleaseAll(void)
{
while (num_held_lwlocks > 0)
{
HOLD_INTERRUPTS(); /* match the upcoming RESUME_INTERRUPTS */
LWLockRelease(held_lwlocks[num_held_lwlocks - 1].lock);
}
}
/*
* LWLockHeldByMe - test whether my process currently holds a lock
*
* This is meant as debug support only. We currently do not distinguish
* whether the lock is held shared or exclusive.
*/
bool
LWLockHeldByMe(LWLock *l)
{
int i;
for (i = 0; i < num_held_lwlocks; i++)
{
if (held_lwlocks[i].lock == l)
return true;
}
return false;
}