Revoke bc5334d867

doc/src/sgml/config.sgml

@@ -330,22 +330,6 @@ include 'filename'
       </listitem>
      </varlistentry>
 
-     <varlistentry id="guc-recovery-config-directory" xreflabel="recovery_config_directory">
-      <term><varname>recovery_config_directory</varname> (<type>string</type>)</term>
-      <indexterm>
-       <primary><varname>recovery_config_directory</> configuration parameter</primary>
-      </indexterm>
-      <listitem>
-       <para>
-         Specifies the directory to use for the recovery.conf file. Note
-         the server requires read and write permission on this directory
-         because the file will be renamed to recovery.done at the end of
-         recovery.
-         This parameter can only be set at server start.
-       </para>
-      </listitem>
-     </varlistentry>
-
      <varlistentry id="guc-config-file" xreflabel="config_file">
       <term><varname>config_file</varname> (<type>string</type>)</term>
       <indexterm>

src/backend/access/transam/xlog.c

@@ -62,7 +62,6 @@
 
 extern bool bootstrap_data_checksums;
 
-char	recoveryConfPath[MAXPGPATH];
 /* File path names (all relative to $PGDATA) */
 #define RECOVERY_COMMAND_FILE	"recovery.conf"
 #define RECOVERY_COMMAND_DONE	"recovery.done"
@@ -4164,8 +4163,7 @@ readRecoveryCommandFile(void)
 			   *head = NULL,
 			   *tail = NULL;
 
-	snprintf(recoveryConfPath, MAXPGPATH, "%s/%s", RecoveryConfDir, RECOVERY_COMMAND_FILE);
-	fd = AllocateFile(recoveryConfPath, "r");
+	fd = AllocateFile(RECOVERY_COMMAND_FILE, "r");
 	if (fd == NULL)
 	{
 		if (errno == ENOENT)
@@ -4173,7 +4171,7 @@ readRecoveryCommandFile(void)
 		ereport(FATAL,
 				(errcode_for_file_access(),
 				 errmsg("could not open recovery command file \"%s\": %m",
-						recoveryConfPath)));
+						RECOVERY_COMMAND_FILE)));
 	}
 
 	/*
@@ -4347,7 +4345,7 @@ readRecoveryCommandFile(void)
 		if (PrimaryConnInfo == NULL && recoveryRestoreCommand == NULL)
 			ereport(WARNING,
 					(errmsg("recovery command file \"%s\" specified neither primary_conninfo nor restore_command",
-							recoveryConfPath),
+							RECOVERY_COMMAND_FILE),
 					 errhint("The database server will regularly poll the pg_xlog subdirectory to check for files placed there.")));
 	}
 	else
@@ -4355,7 +4353,7 @@ readRecoveryCommandFile(void)
 		if (recoveryRestoreCommand == NULL)
 			ereport(FATAL,
 					(errmsg("recovery command file \"%s\" must specify restore_command when standby mode is not enabled",
-							recoveryConfPath)));
+							RECOVERY_COMMAND_FILE)));
 	}
 
 	/* Enable fetching from archive recovery area */
@@ -4397,7 +4395,6 @@ static void
 exitArchiveRecovery(TimeLineID endTLI, XLogSegNo endLogSegNo)
 {
 	char		recoveryPath[MAXPGPATH];
-	char		recoveryDonePath[MAXPGPATH];
 	char		xlogpath[MAXPGPATH];
 
 	/*
@@ -4462,13 +4459,12 @@ exitArchiveRecovery(TimeLineID endTLI, XLogSegNo endLogSegNo)
 	 * Rename the config file out of the way, so that we don't accidentally
 	 * re-enter archive recovery mode in a subsequent crash.
 	 */
-	snprintf(recoveryDonePath, MAXPGPATH, "%s/%s", RecoveryConfDir, RECOVERY_COMMAND_DONE);
-	unlink(recoveryDonePath);
-	if (rename(recoveryConfPath, recoveryDonePath) != 0)
+	unlink(RECOVERY_COMMAND_DONE);
+	if (rename(RECOVERY_COMMAND_FILE, RECOVERY_COMMAND_DONE) != 0)
 		ereport(FATAL,
 				(errcode_for_file_access(),
 				 errmsg("could not rename file \"%s\" to \"%s\": %m",
-						recoveryConfPath, recoveryDonePath)));
+						RECOVERY_COMMAND_FILE, RECOVERY_COMMAND_DONE)));
 
 	ereport(LOG,
 			(errmsg("archive recovery complete")));

src/backend/utils/init/globals.c

@@ -46,7 +46,6 @@ int			MyPMChildSlot;
  * explicitly.
  */
 char	   *DataDir = NULL;
-char	   *RecoveryConfDir = NULL;
 
 char		OutputFileName[MAXPGPATH];	/* debugging output file */
 

src/backend/utils/init/miscinit.c

@@ -99,25 +99,6 @@ SetDataDir(const char *dir)
 	DataDir = new;
 }
 
-/*
- * Set recovery config directory, but make sure it's an absolute path.  Use this,
- * never set RecoveryConfDir directly.
- */
-void
-SetRecoveryConfDir(const char *dir)
-{
-	char	   *new;
-
-	AssertArg(dir);
-
-	/* If presented path is relative, convert to absolute */
-	new = make_absolute_path(dir);
-
-	if (RecoveryConfDir)
-		free(RecoveryConfDir);
-	RecoveryConfDir = new;
-}
-
 /*
  * Change working directory to DataDir.  Most of the postmaster and backend
  * code assumes that we are in DataDir so it can use relative paths to access

src/backend/utils/misc/guc.c

@@ -424,7 +424,6 @@ int			temp_file_limit = -1;
 int			num_temp_buffers = 1024;
 
 char	   *data_directory;
-char	   *recovery_config_directory;
 char	   *ConfigFileName;
 char	   *HbaFileName;
 char	   *IdentFileName;
@@ -2961,17 +2960,6 @@ static struct config_string ConfigureNamesString[] =
 		NULL, NULL, NULL
 	},
 
-	{
-		{"recovery_config_directory", PGC_POSTMASTER, FILE_LOCATIONS,
-			gettext_noop("Sets the server's recovery configuration directory."),
-			NULL,
-			GUC_SUPERUSER_ONLY
-		},
-		&recovery_config_directory,
-		NULL,
-		NULL, NULL, NULL
-	},
-
 	{
 		{"config_file", PGC_POSTMASTER, FILE_LOCATIONS,
 			gettext_noop("Sets the server's main configuration file."),
@@ -4193,18 +4181,6 @@ SelectConfigFiles(const char *userDoption, const char *progname)
 	 */
 	SetConfigOption("data_directory", DataDir, PGC_POSTMASTER, PGC_S_OVERRIDE);
 
-	/*
-	 * If the recovery_config_directory GUC variable has been set, use that,
-	 * otherwise use DataDir.
-	 *
-	 * Note: SetRecoveryConfDir will copy and absolute-ize its argument,
-	 * so we don't have to.
-	 */
-	if (recovery_config_directory)
-		SetRecoveryConfDir(recovery_config_directory);
-	else
-		SetRecoveryConfDir(DataDir);
-
 	/*
 	 * If timezone_abbreviations wasn't set in the configuration file, install
 	 * the default value.  We do it this way because we can't safely install a

src/include/miscadmin.h

@@ -137,7 +137,6 @@ extern bool IsBinaryUpgrade;
 extern bool ExitOnAnyError;
 
 extern PGDLLIMPORT char *DataDir;
-extern PGDLLIMPORT char *RecoveryConfDir;
 
 extern PGDLLIMPORT int NBuffers;
 extern int	MaxBackends;
@@ -302,7 +301,6 @@ extern Oid	GetCurrentRoleId(void);
 extern void SetCurrentRoleId(Oid roleid, bool is_superuser);
 
 extern void SetDataDir(const char *dir);
-extern void SetRecoveryConfDir(const char *dir);
 extern void ChangeToDataDir(void);
 extern char *make_absolute_path(const char *path);
 

src/include/utils/guc.h

@@ -220,7 +220,6 @@ extern int	temp_file_limit;
 extern int	num_temp_buffers;
 
 extern char *data_directory;
-extern char *recovery_config_directory;
 extern char *ConfigFileName;
 extern char *HbaFileName;
 extern char *IdentFileName;