Get rid of WALBufMappingLock

Allow multiple backends to initialize WAL buffers concurrently.  This way
`MemSet((char *) NewPage, 0, XLOG_BLCKSZ);` can run in parallel without
taking a single LWLock in exclusive mode.

The new algorithm works as follows:
 * reserve a page for initialization using XLogCtl->InitializeReserved,
 * ensure the page is written out,
 * once the page is initialized, try to advance XLogCtl->InitializedUpTo and
   signal to waiters using XLogCtl->InitializedUpToCondVar condition
   variable,
 * repeat previous steps until we reserve initialization up to the target
   WAL position,
 * wait until concurrent initialization finishes using a
   XLogCtl->InitializedUpToCondVar.

Now, multiple backends can, in parallel, concurrently reserve pages,
initialize them, and advance XLogCtl->InitializedUpTo to point to the latest
initialized page.

Author: Yura Sokolov <y.sokolov@postgrespro.ru>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>

src/backend/access/transam/xlog.c

@@ -302,11 +302,6 @@ static bool doPageWrites;
  * so it's a plain spinlock.  The other locks are held longer (potentially
  * over I/O operations), so we use LWLocks for them.  These locks are:
  *
- * WALBufMappingLock: must be held to replace a page in the WAL buffer cache.
- * It is only held while initializing and changing the mapping.  If the
- * contents of the buffer being replaced haven't been written yet, the mapping
- * lock is released while the write is done, and reacquired afterwards.
- *
  * WALWriteLock: must be held to write WAL buffers to disk (XLogWrite or
  * XLogFlush).
  *
@@ -473,21 +468,32 @@ typedef struct XLogCtlData
 	pg_atomic_uint64 logFlushResult;	/* last byte + 1 flushed */
 
 	/*
-	 * Latest initialized page in the cache (last byte position + 1).
+	 * Latest reserved for inititalization page in the cache (last byte
+	 * position + 1).
 	 *
-	 * To change the identity of a buffer (and InitializedUpTo), you need to
-	 * hold WALBufMappingLock.  To change the identity of a buffer that's
+	 * To change the identity of a buffer, you need to advance
+	 * InitializeReserved first.  To change the identity of a buffer that's
 	 * still dirty, the old page needs to be written out first, and for that
 	 * you need WALWriteLock, and you need to ensure that there are no
 	 * in-progress insertions to the page by calling
 	 * WaitXLogInsertionsToFinish().
 	 */
-	XLogRecPtr	InitializedUpTo;
+	pg_atomic_uint64 InitializeReserved;
+
+	/*
+	 * Latest initialized page in the cache (last byte position + 1).
+	 *
+	 * InitializedUpTo is updated after the buffer initialization.  After
+	 * update, waiters got notification using InitializedUpToCondVar.
+	 */
+	pg_atomic_uint64 InitializedUpTo;
+	ConditionVariable InitializedUpToCondVar;
 
 	/*
 	 * These values do not change after startup, although the pointed-to pages
-	 * and xlblocks values certainly do.  xlblocks values are protected by
-	 * WALBufMappingLock.
+	 * and xlblocks values certainly do.  xlblocks values are changed
+	 * lock-free according to the check for the xlog write position and are
+	 * accompanied by changes of InitializeReserved and InitializedUpTo.
 	 */
 	char	   *pages;			/* buffers for unwritten XLOG pages */
 	pg_atomic_uint64 *xlblocks; /* 1st byte ptr-s + XLOG_BLCKSZ */
@@ -810,9 +816,9 @@ XLogInsertRecord(XLogRecData *rdata,
 	 * fullPageWrites from changing until the insertion is finished.
 	 *
 	 * Step 2 can usually be done completely in parallel. If the required WAL
-	 * page is not initialized yet, you have to grab WALBufMappingLock to
-	 * initialize it, but the WAL writer tries to do that ahead of insertions
-	 * to avoid that from happening in the critical path.
+	 * page is not initialized yet, you have to go through AdvanceXLInsertBuffer,
+	 * which will ensure it is initialized. But the WAL writer tries to do that
+	 * ahead of insertions to avoid that from happening in the critical path.
 	 *
 	 *----------
 	 */
@@ -1991,32 +1997,70 @@ AdvanceXLInsertBuffer(XLogRecPtr upto, TimeLineID tli, bool opportunistic)
 	XLogRecPtr	NewPageEndPtr = InvalidXLogRecPtr;
 	XLogRecPtr	NewPageBeginPtr;
 	XLogPageHeader NewPage;
+	XLogRecPtr	ReservedPtr;
 	int			npages pg_attribute_unused() = 0;
 
-	LWLockAcquire(WALBufMappingLock, LW_EXCLUSIVE);
-
 	/*
-	 * Now that we have the lock, check if someone initialized the page
-	 * already.
+	 * We must run the loop below inside the critical section as we expect
+	 * XLogCtl->InitializedUpTo to eventually keep up.  The most of callers
+	 * already run inside the critical section. Except for WAL writer, which
+	 * passed 'opportunistic == true', and therefore we don't perform
+	 * operations that could error out.
+	 *
+	 * Start an explicit critical section anyway though.
 	 */
-	while (upto >= XLogCtl->InitializedUpTo || opportunistic)
+	Assert(CritSectionCount > 0 || opportunistic);
+	START_CRIT_SECTION();
+
+	/*--
+	 * Loop till we get all the pages in WAL buffer before 'upto' reserved for
+	 * initialization.  Multiple process can initialize different buffers with
+	 * this loop in parallel as following.
+	 *
+	 * 1. Reserve page for initialization using XLogCtl->InitializeReserved.
+	 * 2. Initialize the reserved page.
+	 * 3. Attempt to advance XLogCtl->InitializedUpTo,
+	 */
+	ReservedPtr = pg_atomic_read_u64(&XLogCtl->InitializeReserved);
+	while (upto >= ReservedPtr || opportunistic)
 	{
-		nextidx = XLogRecPtrToBufIdx(XLogCtl->InitializedUpTo);
+		Assert(ReservedPtr % XLOG_BLCKSZ == 0);
 
 		/*
-		 * Get ending-offset of the buffer page we need to replace (this may
-		 * be zero if the buffer hasn't been used yet).  Fall through if it's
-		 * already written out.
+		 * Get ending-offset of the buffer page we need to replace.
+		 *
+		 * We don't lookup into xlblocks, but rather calculate position we
+		 * must wait to be written. If it was written, xlblocks will have this
+		 * position (or uninitialized)
 		 */
-		OldPageRqstPtr = pg_atomic_read_u64(&XLogCtl->xlblocks[nextidx]);
-		if (LogwrtResult.Write < OldPageRqstPtr)
+		if (ReservedPtr + XLOG_BLCKSZ > XLOG_BLCKSZ * XLOGbuffers)
+			OldPageRqstPtr = ReservedPtr + XLOG_BLCKSZ - XLOG_BLCKSZ * XLOGbuffers;
+		else
+			OldPageRqstPtr = InvalidXLogRecPtr;
+
+		if (LogwrtResult.Write < OldPageRqstPtr && opportunistic)
 		{
 			/*
-			 * Nope, got work to do. If we just want to pre-initialize as much
-			 * as we can without flushing, give up now.
+			 * If we just want to pre-initialize as much as we can without
+			 * flushing, give up now.
 			 */
-			if (opportunistic)
-				break;
+			upto = ReservedPtr - 1;
+			break;
+		}
+
+		/*
+		 * Attempt to reserve the page for initialization.  Failure means that
+		 * this page got reserved by another process.
+		 */
+		if (!pg_atomic_compare_exchange_u64(&XLogCtl->InitializeReserved,
+											&ReservedPtr,
+											ReservedPtr + XLOG_BLCKSZ))
+			continue;
+
+		/* Fall through if it's already written out. */
+		if (LogwrtResult.Write < OldPageRqstPtr)
+		{
+			/* Nope, got work to do. */
 
 			/* Advance shared memory write request position */
 			SpinLockAcquire(&XLogCtl->info_lck);
@@ -2031,14 +2075,6 @@ AdvanceXLInsertBuffer(XLogRecPtr upto, TimeLineID tli, bool opportunistic)
 			RefreshXLogWriteResult(LogwrtResult);
 			if (LogwrtResult.Write < OldPageRqstPtr)
 			{
-				/*
-				 * Must acquire write lock. Release WALBufMappingLock first,
-				 * to make sure that all insertions that we need to wait for
-				 * can finish (up to this same position). Otherwise we risk
-				 * deadlock.
-				 */
-				LWLockRelease(WALBufMappingLock);
-
 				WaitXLogInsertionsToFinish(OldPageRqstPtr);
 
 				LWLockAcquire(WALWriteLock, LW_EXCLUSIVE);
@@ -2060,9 +2096,6 @@ AdvanceXLInsertBuffer(XLogRecPtr upto, TimeLineID tli, bool opportunistic)
 					PendingWalStats.wal_buffers_full++;
 					TRACE_POSTGRESQL_WAL_BUFFER_WRITE_DIRTY_DONE();
 				}
-				/* Re-acquire WALBufMappingLock and retry */
-				LWLockAcquire(WALBufMappingLock, LW_EXCLUSIVE);
-				continue;
 			}
 		}
 
@@ -2070,10 +2103,17 @@ AdvanceXLInsertBuffer(XLogRecPtr upto, TimeLineID tli, bool opportunistic)
 		 * Now the next buffer slot is free and we can set it up to be the
 		 * next output page.
 		 */
-		NewPageBeginPtr = XLogCtl->InitializedUpTo;
+		NewPageBeginPtr = ReservedPtr;
 		NewPageEndPtr = NewPageBeginPtr + XLOG_BLCKSZ;
+		nextidx = XLogRecPtrToBufIdx(ReservedPtr);
 
-		Assert(XLogRecPtrToBufIdx(NewPageBeginPtr) == nextidx);
+#ifdef USE_ASSERT_CHECKING
+		{
+			XLogRecPtr	storedBound = pg_atomic_read_u64(&XLogCtl->xlblocks[nextidx]);
+
+			Assert(storedBound == OldPageRqstPtr || storedBound == InvalidXLogRecPtr);
+		}
+#endif
 
 		NewPage = (XLogPageHeader) (XLogCtl->pages + nextidx * (Size) XLOG_BLCKSZ);
 
@@ -2139,11 +2179,50 @@ AdvanceXLInsertBuffer(XLogRecPtr upto, TimeLineID tli, bool opportunistic)
 		pg_write_barrier();
 
 		pg_atomic_write_u64(&XLogCtl->xlblocks[nextidx], NewPageEndPtr);
-		XLogCtl->InitializedUpTo = NewPageEndPtr;
+
+		/*
+		 * Try to advance XLogCtl->InitializedUpTo.
+		 *
+		 * If the CAS operation failed, then some of previous pages are not
+		 * initialized yet, and this backend gives up.
+		 *
+		 * Since initializer of next page might give up on advancing of
+		 * InitializedUpTo, this backend have to attempt advancing until it
+		 * find page "in the past" or concurrent backend succeeded at
+		 * advancing.  When we finish advancing XLogCtl->InitializedUpTo, we
+		 * notify all the waiters with XLogCtl->InitializedUpToCondVar.
+		 */
+		while (pg_atomic_compare_exchange_u64(&XLogCtl->InitializedUpTo, &NewPageBeginPtr, NewPageEndPtr))
+		{
+			NewPageBeginPtr = NewPageEndPtr;
+			NewPageEndPtr = NewPageBeginPtr + XLOG_BLCKSZ;
+			nextidx = XLogRecPtrToBufIdx(NewPageBeginPtr);
+
+			if (pg_atomic_read_u64(&XLogCtl->xlblocks[nextidx]) != NewPageEndPtr)
+			{
+				/*
+				 * Page at nextidx wasn't initialized yet, so we cann't move
+				 * InitializedUpto further. It will be moved by backend which
+				 * will initialize nextidx.
+				 */
+				ConditionVariableBroadcast(&XLogCtl->InitializedUpToCondVar);
+				break;
+			}
+		}
 
 		npages++;
 	}
-	LWLockRelease(WALBufMappingLock);
+
+	END_CRIT_SECTION();
+
+	/*
+	 * All the pages in WAL buffer before 'upto' were reserved for
+	 * initialization.  However, some pages might be reserved by concurrent
+	 * processes.  Wait till they finish initialization.
+	 */
+	while (upto >= pg_atomic_read_u64(&XLogCtl->InitializedUpTo))
+		ConditionVariableSleep(&XLogCtl->InitializedUpToCondVar, WAIT_EVENT_WAL_BUFFER_INIT);
+	ConditionVariableCancelSleep();
 
 #ifdef WAL_DEBUG
 	if (XLOG_DEBUG && npages > 0)
@@ -5044,6 +5123,10 @@ XLOGShmemInit(void)
 	pg_atomic_init_u64(&XLogCtl->logWriteResult, InvalidXLogRecPtr);
 	pg_atomic_init_u64(&XLogCtl->logFlushResult, InvalidXLogRecPtr);
 	pg_atomic_init_u64(&XLogCtl->unloggedLSN, InvalidXLogRecPtr);
+
+	pg_atomic_init_u64(&XLogCtl->InitializeReserved, InvalidXLogRecPtr);
+	pg_atomic_init_u64(&XLogCtl->InitializedUpTo, InvalidXLogRecPtr);
+	ConditionVariableInit(&XLogCtl->InitializedUpToCondVar);
 }
 
 /*
@@ -6063,7 +6146,7 @@ StartupXLOG(void)
 		memset(page + len, 0, XLOG_BLCKSZ - len);
 
 		pg_atomic_write_u64(&XLogCtl->xlblocks[firstIdx], endOfRecoveryInfo->lastPageBeginPtr + XLOG_BLCKSZ);
-		XLogCtl->InitializedUpTo = endOfRecoveryInfo->lastPageBeginPtr + XLOG_BLCKSZ;
+		pg_atomic_write_u64(&XLogCtl->InitializedUpTo, endOfRecoveryInfo->lastPageBeginPtr + XLOG_BLCKSZ);
 	}
 	else
 	{
@@ -6072,8 +6155,9 @@ StartupXLOG(void)
 		 * let the first attempt to insert a log record to initialize the next
 		 * buffer.
 		 */
-		XLogCtl->InitializedUpTo = EndOfLog;
+		pg_atomic_write_u64(&XLogCtl->InitializedUpTo, EndOfLog);
 	}
+	pg_atomic_write_u64(&XLogCtl->InitializeReserved, pg_atomic_read_u64(&XLogCtl->InitializedUpTo));
 
 	/*
 	 * Update local and shared status.  This is OK to do without any locks

src/backend/utils/activity/wait_event_names.txt

@@ -155,6 +155,7 @@ REPLICATION_SLOT_DROP	"Waiting for a replication slot to become inactive so it c
 RESTORE_COMMAND	"Waiting for <xref linkend="guc-restore-command"/> to complete."
 SAFE_SNAPSHOT	"Waiting to obtain a valid snapshot for a <literal>READ ONLY DEFERRABLE</literal> transaction."
 SYNC_REP	"Waiting for confirmation from a remote server during synchronous replication."
+WAL_BUFFER_INIT	"Waiting on WAL buffer to be initialized."
 WAL_RECEIVER_EXIT	"Waiting for the WAL receiver to exit."
 WAL_RECEIVER_WAIT_START	"Waiting for startup process to send initial data for streaming replication."
 WAL_SUMMARY_READY	"Waiting for a new WAL summary to be generated."
@@ -310,7 +311,6 @@ XidGen	"Waiting to allocate a new transaction ID."
 ProcArray	"Waiting to access the shared per-process data structures (typically, to get a snapshot or report a session's transaction ID)."
 SInvalRead	"Waiting to retrieve messages from the shared catalog invalidation queue."
 SInvalWrite	"Waiting to add a message to the shared catalog invalidation queue."
-WALBufMapping	"Waiting to replace a page in WAL buffers."
 WALWrite	"Waiting for WAL buffers to be written to disk."
 ControlFile	"Waiting to read or update the <filename>pg_control</filename> file or create a new WAL file."
 MultiXactGen	"Waiting to read or update shared multixact state."

src/include/storage/lwlocklist.h

@@ -37,7 +37,7 @@ PG_LWLOCK(3, XidGen)
 PG_LWLOCK(4, ProcArray)
 PG_LWLOCK(5, SInvalRead)
 PG_LWLOCK(6, SInvalWrite)
-PG_LWLOCK(7, WALBufMapping)
+/* 7 was WALBufMapping */
 PG_LWLOCK(8, WALWrite)
 PG_LWLOCK(9, ControlFile)
 /* 10 was CheckpointLock */