open-dsi
/
postgres
mirror of https://github.com/postgres/postgres
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Single-reader, single-writer, lightweight shared message queue.

Browse Source 
This code provides infrastructure for user backends to communicate
relatively easily with background workers.  The message queue is
structured as a ring buffer and allows messages of arbitary length
to be sent and received.

Patch by me.  Review by KaiGai Kohei and Andres Freund.
pull/6/head
Robert Haas 12 years ago
parent 6ddd5137b2
commit ec9037df26
3 changed files with 1016 additions and 1 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 2
      src/backend/storage/ipc/Makefile
  2. 945
      src/backend/storage/ipc/shm_mq.c
  3. 70
      src/include/storage/shm_mq.h

2
src/backend/storage/ipc/Makefile
Unescape View File

@ -16,6 +16,6 @@ endif
endif
OBJS = dsm_impl.o dsm.o ipc.o ipci.o pmsignal.o procarray.o procsignal.o \
shmem.o shmqueue.o shm_toc.o sinval.o sinvaladt.o standby.o
shmem.o shmqueue.o shm_mq.o shm_toc.o sinval.o sinvaladt.o standby.o
include $(top_srcdir)/src/backend/common.mk

945
src/backend/storage/ipc/shm_mq.c
Unescape View File

@ -0,0 +1,945 @@
/*-------------------------------------------------------------------------
*
* shm_mq.c
* single-reader, single-writer shared memory message queue
*
* Both the sender and the receiver must have a PGPROC; their respective
* process latches are used for synchronization. Only the sender may send,
* and only the receiver may receive. This is intended to allow a user
* backend to communicate with worker backends that it has registered.
*
* Portions Copyright (c) 1996-2013, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
* src/include/storage/shm_mq.h
*
*-------------------------------------------------------------------------
*/
#include "postgres.h"
#include "miscadmin.h"
#include "postmaster/bgworker.h"
#include "storage/procsignal.h"
#include "storage/shm_mq.h"
#include "storage/spin.h"
/*
* This structure represents the actual queue, stored in shared memory.
*
* Some notes on synchronization:
*
* mq_receiver and mq_bytes_read can only be changed by the receiver; and
* mq_sender and mq_bytes_written can only be changed by the sender. However,
* because most of these fields are 8 bytes and we don't assume that 8 byte
* reads and writes are atomic, the spinlock must be taken whenever the field
* is updated, and whenever it is read by a process other than the one allowed
* to modify it. But the process that is allowed to modify it is also allowed
* to read it without the lock. On architectures where 8-byte writes are
* atomic, we could replace these spinlocks with memory barriers, but
* testing found no performance benefit, so it seems best to keep things
* simple for now.
*
* mq_detached can be set by either the sender or the receiver, so the mutex
* must be held to read or write it. Memory barriers could be used here as
* well, if needed.
*
* mq_ring_size and mq_ring_offset never change after initialization, and
* can therefore be read without the lock.
*
* Importantly, mq_ring can be safely read and written without a lock. Were
* this not the case, we'd have to hold the spinlock for much longer
* intervals, and performance might suffer. Fortunately, that's not
* necessary. At any given time, the difference between mq_bytes_read and
* mq_bytes_written defines the number of bytes within mq_ring that contain
* unread data, and mq_bytes_read defines the position where those bytes
* begin. The sender can increase the number of unread bytes at any time,
* but only the receiver can give license to overwrite those bytes, by
* incrementing mq_bytes_read. Therefore, it's safe for the receiver to read
* the unread bytes it knows to be present without the lock. Conversely,
* the sender can write to the unused portion of the ring buffer without
* the lock, because nobody else can be reading or writing those bytes. The
* receiver could be making more bytes unused by incrementing mq_bytes_read,
* but that's OK. Note that it would be unsafe for the receiver to read any
* data it's already marked as read, or to write any data; and it would be
* unsafe for the sender to reread any data after incrementing
* mq_bytes_written, but fortunately there's no need for any of that.
*/
struct shm_mq
{
slock_t mq_mutex;
PGPROC *mq_receiver;
PGPROC *mq_sender;
uint64 mq_bytes_read;
uint64 mq_bytes_written;
uint64 mq_ring_size;
bool mq_detached;
uint8 mq_ring_offset;
char mq_ring[FLEXIBLE_ARRAY_MEMBER];
};
/*
* This structure is a backend-private handle for access to a queue.
*
* mqh_queue is a pointer to the queue we've attached, and mqh_segment is
* a pointer to the dynamic shared memory segment that contains it.
*
* If this queue is intended to connect the current process with a background
* worker that started it, the user can pass a pointer to the worker handle
* to shm_mq_attach(), and we'll store it in mqh_handle. The point of this
* is to allow us to begin sending to or receiving from that queue before the
* process we'll be communicating with has even been started. If it fails
* to start, the handle will allow us to notice that and fail cleanly, rather
* than waiting forever; see shm_mq_wait_internal. This is mostly useful in
* simple cases - e.g. where there are just 2 processes communicating; in
* more complex scenarios, every process may not have a BackgroundWorkerHandle
* available, or may need to watch for the failure of more than one other
* process at a time.
*
* When a message exists as a contiguous chunk of bytes in the queue - that is,
* it is smaller than the size of the ring buffer and does not wrap around
* the end - we return the message to the caller as a pointer into the buffer.
* For messages that are larger or happen to wrap, we reassemble the message
* locally by copying the chunks into a backend-local buffer. mqh_buffer is
* the buffer, and mqh_buflen is the number of bytes allocated for it.
*
* mqh_partial_message_bytes, mqh_expected_bytes, and mqh_did_length_word
* are used to track the state of non-blocking operations. When the caller
* attempts a non-blocking operation that returns SHM_MQ_WOULD_BLOCK, they
* are expected to retry the call at a later time with the same argument;
* we need to retain enough state to pick up where we left off.
* mqh_did_length_word tracks whether we read or wrote the length word,
* mqh_partial_message_bytes tracks the number of payload bytes read or
* written, and mqh_expected_bytes - which is used only for reads - tracks
* the expected total size of the payload.
*
* mqh_counterparty_attached tracks whether we know the counterparty to have
* attached to the queue at some previous point. This lets us avoid some
* mutex acquisitions.
*
* mqh_context is the memory context in effect at the time we attached to
* the shm_mq. The shm_mq_handle itself is allocated in this context, and
* we make sure any other allocations we do happen in this context as well,
* to avoid nasty surprises.
*/
struct shm_mq_handle
{
shm_mq *mqh_queue;
dsm_segment *mqh_segment;
BackgroundWorkerHandle *mqh_handle;
char *mqh_buffer;
uint64 mqh_buflen;
uint64 mqh_consume_pending;
uint64 mqh_partial_message_bytes;
uint64 mqh_expected_bytes;
bool mqh_did_length_word;
bool mqh_counterparty_attached;
MemoryContext mqh_context;
};
static shm_mq_result shm_mq_send_bytes(shm_mq_handle *mq, uint64 nbytes,
void *data, bool nowait, uint64 *bytes_written);
static shm_mq_result shm_mq_receive_bytes(shm_mq *mq, uint64 bytes_needed,
bool nowait, uint64 *nbytesp, void **datap);
static bool shm_mq_wait_internal(volatile shm_mq *mq, PGPROC * volatile *ptr,
BackgroundWorkerHandle *handle);
static uint64 shm_mq_get_bytes_read(volatile shm_mq *mq, bool *detached);
static void shm_mq_inc_bytes_read(volatile shm_mq *mq, uint64 n);
static uint64 shm_mq_get_bytes_written(volatile shm_mq *mq, bool *detached);
static void shm_mq_inc_bytes_written(volatile shm_mq *mq, uint64 n);
static shm_mq_result shm_mq_notify_receiver(volatile shm_mq *mq);
static void shm_mq_detach_callback(dsm_segment *seg, Datum arg);
/* Minimum queue size is enough for header and at least one chunk of data. */
const Size shm_mq_minimum_size =
MAXALIGN(offsetof(shm_mq, mq_ring)) + MAXIMUM_ALIGNOF;
#define MQH_INITIAL_BUFSIZE 8192
/*
* Initialize a new shared message queue.
*/
shm_mq *
shm_mq_create(void *address, Size size)
{
shm_mq *mq = address;
uint64 data_offset = MAXALIGN(offsetof(shm_mq, mq_ring));
/* If the size isn't MAXALIGN'd, just discard the odd bytes. */
size = MAXALIGN_DOWN(size);
/* Queue size must be large enough to hold some data. */
Assert(size > data_offset);
/* Initialize queue header. */
SpinLockInit(&mq->mq_mutex);
mq->mq_receiver = NULL;
mq->mq_sender = NULL;
mq->mq_bytes_read = 0;
mq->mq_bytes_written = 0;
mq->mq_ring_size = size - data_offset;
mq->mq_detached = false;
mq->mq_ring_offset = data_offset - offsetof(shm_mq, mq_ring);
return mq;
}
/*
* Set the identity of the process that will receive from a shared message
* queue.
*/
void
shm_mq_set_receiver(shm_mq *mq, PGPROC *proc)
{
volatile shm_mq *vmq = mq;
PGPROC *sender;
SpinLockAcquire(&mq->mq_mutex);
Assert(vmq->mq_receiver == NULL);
vmq->mq_receiver = proc;
sender = vmq->mq_sender;
SpinLockRelease(&mq->mq_mutex);
if (sender != NULL)
SetLatch(&sender->procLatch);
}
/*
* Set the identity of the process that will send to a shared message queue.
*/
void
shm_mq_set_sender(shm_mq *mq, PGPROC *proc)
{
volatile shm_mq *vmq = mq;
PGPROC *receiver;
SpinLockAcquire(&mq->mq_mutex);
Assert(vmq->mq_sender == NULL);
vmq->mq_sender = proc;
receiver = vmq->mq_receiver;
SpinLockRelease(&mq->mq_mutex);
if (receiver != NULL)
SetLatch(&receiver->procLatch);
}
/*
* Get the configured receiver.
*/
PGPROC *
shm_mq_get_receiver(shm_mq *mq)
{
volatile shm_mq *vmq = mq;
PGPROC *receiver;
SpinLockAcquire(&mq->mq_mutex);
receiver = vmq->mq_receiver;
SpinLockRelease(&mq->mq_mutex);
return receiver;
}
/*
* Get the configured sender.
*/
PGPROC *
shm_mq_get_sender(shm_mq *mq)
{
volatile shm_mq *vmq = mq;
PGPROC *sender;
SpinLockAcquire(&mq->mq_mutex);
sender = vmq->mq_sender;
SpinLockRelease(&mq->mq_mutex);
return sender;
}
/*
* Attach to a shared message queue so we can send or receive messages.
*
* The memory context in effect at the time this function is called should
* be one which will last for at least as long as the message queue itself.
* We'll allocate the handle in that context, and future allocations that
* are needed to buffer incoming data will happen in that context as well.
*
* If seg != NULL, the queue will be automatically detached when that dynamic
* shared memory segment is detached.
*
* If handle != NULL, the queue can be read or written even before the
* other process has attached. We'll wait for it to do so if needed. The
* handle must be for a background worker initialized with bgw_notify_pid
* equal to our PID.
*
* shm_mq_detach() should be called when done. This will free the
* shm_mq_handle and mark the queue itself as detached, so that our
* counterpart won't get stuck waiting for us to fill or drain the queue
* after we've already lost interest.
*/
shm_mq_handle *
shm_mq_attach(shm_mq *mq, dsm_segment *seg, BackgroundWorkerHandle *handle)
{
shm_mq_handle *mqh = palloc(sizeof(shm_mq_handle));
Assert(mq->mq_receiver == MyProc || mq->mq_sender == MyProc);
mqh->mqh_queue = mq;
mqh->mqh_segment = seg;
mqh->mqh_buffer = NULL;
mqh->mqh_handle = handle;
mqh->mqh_buflen = 0;
mqh->mqh_consume_pending = 0;
mqh->mqh_context = CurrentMemoryContext;
mqh->mqh_partial_message_bytes = 0;
mqh->mqh_did_length_word = false;
mqh->mqh_counterparty_attached = false;
if (seg != NULL)
on_dsm_detach(seg, shm_mq_detach_callback, PointerGetDatum(mq));
return mqh;
}
/*
* Write a message into a shared message queue.
*
* When nowait = false, we'll wait on our process latch when the ring buffer
* fills up, and then continue writing once the receiver has drained some data.
* The process latch is reset after each wait.
*
* When nowait = true, we do not manipulate the state of the process latch;
* instead, if the buffer becomes full, we return SHM_MQ_WOULD_BLOCK. In
* this case, the caller should call this function again, with the same
* arguments, each time the process latch is set. (Once begun, the sending
* of a message cannot be aborted except by detaching from the queue; changing
* the length or payload will corrupt the queue.)
*/
shm_mq_result
shm_mq_send(shm_mq_handle *mqh, uint64 nbytes, void *data, bool nowait)
{
shm_mq_result res;
shm_mq *mq = mqh->mqh_queue;
uint64 bytes_written;
Assert(mq->mq_sender == MyProc);
/* Write the message length into the buffer. */
if (!mqh->mqh_did_length_word)
{
res = shm_mq_send_bytes(mqh, sizeof(uint64), &nbytes, nowait,
&bytes_written);
if (res != SHM_MQ_SUCCESS)
return res;
/*
* We're sure to have sent the length in full, since we always
* write a MAXALIGN'd chunk.
*/
Assert(bytes_written == MAXALIGN64(sizeof(uint64)));
mqh->mqh_did_length_word = true;
}
/* Write the actual data bytes into the buffer. */
Assert(mqh->mqh_partial_message_bytes <= nbytes);
res = shm_mq_send_bytes(mqh, nbytes - mqh->mqh_partial_message_bytes,
((char *) data) + mqh->mqh_partial_message_bytes,
nowait, &bytes_written);
if (res == SHM_MQ_WOULD_BLOCK)
mqh->mqh_partial_message_bytes += bytes_written;
else
{
mqh->mqh_partial_message_bytes = 0;
mqh->mqh_did_length_word = false;
}
if (res != SHM_MQ_SUCCESS)
return res;
/* Notify receiver of the newly-written data, and return. */
return shm_mq_notify_receiver(mq);
}
/*
* Receive a message from a shared message queue.
*
* We set *nbytes to the message length and *data to point to the message
* payload. If the entire message exists in the queue as a single,
* contiguous chunk, *data will point directly into shared memory; otherwise,
* it will point to a temporary buffer. This mostly avoids data copying in
* the hoped-for case where messages are short compared to the buffer size,
* while still allowing longer messages. In either case, the return value
* remains valid until the next receive operation is perfomed on the queue.
*
* When nowait = false, we'll wait on our process latch when the ring buffer
* is empty and we have not yet received a full message. The sender will
* set our process latch after more data has been written, and we'll resume
* processing. Each call will therefore return a complete message
* (unless the sender detaches the queue).
*
* When nowait = true, we do not manipulate the state of the process latch;
* instead, whenever the buffer is empty and we need to read from it, we
* return SHM_MQ_WOULD_BLOCK. In this case, the caller should call this
* function again after the process latch has been set.
*/
shm_mq_result
shm_mq_receive(shm_mq_handle *mqh, uint64 *nbytesp, void **datap, bool nowait)
{
shm_mq *mq = mqh->mqh_queue;
shm_mq_result res;
uint64 rb = 0;
uint64 nbytes;
uint64 needed;
void *rawdata;
Assert(mq->mq_receiver == MyProc);
/* We can't receive data until the sender has attached. */
if (!mqh->mqh_counterparty_attached)
{
if (nowait)
{
if (shm_mq_get_sender(mq) == NULL)
return SHM_MQ_WOULD_BLOCK;
}
else if (!shm_mq_wait_internal(mq, &mq->mq_sender, mqh->mqh_handle))
{
mq->mq_detached = true;
return SHM_MQ_DETACHED;
}
mqh->mqh_counterparty_attached = true;
}
/* Consume any zero-copy data from previous receive operation. */
if (mqh->mqh_consume_pending > 0)
{
shm_mq_inc_bytes_read(mq, mqh->mqh_consume_pending);
mqh->mqh_consume_pending = 0;
}
/* Determine the message length. */
if (mqh->mqh_did_length_word)
{
/* We've partially received a message; recall expected length. */
nbytes = mqh->mqh_expected_bytes;
}
else
{
/* Try to receive the message length word. */
res = shm_mq_receive_bytes(mq, sizeof(uint64), nowait, &rb, &rawdata);
if (res != SHM_MQ_SUCCESS)
return res;
Assert(rb >= sizeof(uint64));
memcpy(&nbytes, rawdata, sizeof(uint64));
mqh->mqh_expected_bytes = nbytes;
/* If we've already got the whole message, we're done. */
needed = MAXALIGN64(sizeof(uint64)) + MAXALIGN64(nbytes);
if (rb >= needed)
{
/*
* Technically, we could consume the message length information at
* this point, but the extra write to shared memory wouldn't be
* free and in most cases we would reap no benefit.
*/
mqh->mqh_consume_pending = needed;
*nbytesp = nbytes;
*datap = ((char *) rawdata) + MAXALIGN64(sizeof(uint64));
return SHM_MQ_SUCCESS;
}
/* Consume the length word. */
shm_mq_inc_bytes_read(mq, MAXALIGN64(sizeof(uint64)));
mqh->mqh_did_length_word = true;
rb -= MAXALIGN64(sizeof(uint64));
}
if (mqh->mqh_partial_message_bytes == 0)
{
/*
* Try to obtain the whole message in a single chunk. If this works,
* we need not copy the data and can return a pointer directly into
* shared memory.
*/
res = shm_mq_receive_bytes(mq, nbytes, nowait, &rb, &rawdata);
if (res != SHM_MQ_SUCCESS)
return res;
if (rb >= nbytes)
{
mqh->mqh_did_length_word = false;
mqh->mqh_consume_pending = MAXALIGN64(nbytes);
*nbytesp = nbytes;
*datap = rawdata;
return SHM_MQ_SUCCESS;
}
/*
* The message has wrapped the buffer. We'll need to copy it in order
* to return it to the client in one chunk. First, make sure we have a
* large enough buffer available.
*/
if (mqh->mqh_buflen < nbytes)
{
uint64 newbuflen = Max(mqh->mqh_buflen, MQH_INITIAL_BUFSIZE);
while (newbuflen < nbytes)
newbuflen *= 2;
if (mqh->mqh_buffer != NULL)
{
pfree(mqh->mqh_buffer);
mqh->mqh_buffer = NULL;
mqh->mqh_buflen = 0;
}
mqh->mqh_buffer = MemoryContextAlloc(mqh->mqh_context, newbuflen);
mqh->mqh_buflen = newbuflen;
}
}
/* Loop until we've copied the entire message. */
for (;;)
{
uint64 still_needed;
/* Copy as much as we can. */
Assert(mqh->mqh_partial_message_bytes + rb <= nbytes);
memcpy(&mqh->mqh_buffer[mqh->mqh_partial_message_bytes], rawdata, rb);
mqh->mqh_partial_message_bytes += rb;
/*
* Update count of bytes read, with alignment padding. Note
* that this will never actually insert any padding except at the
* end of a message, because the buffer size is a multiple of
* MAXIMUM_ALIGNOF, and each read and write is as well.
*/
Assert(mqh->mqh_partial_message_bytes == nbytes ||
rb == MAXALIGN64(rb));
shm_mq_inc_bytes_read(mq, MAXALIGN64(rb));
/* If we got all the data, exit the loop. */
if (mqh->mqh_partial_message_bytes >= nbytes)
break;
/* Wait for some more data. */
still_needed = nbytes - mqh->mqh_partial_message_bytes;
res = shm_mq_receive_bytes(mq, still_needed, nowait, &rb, &rawdata);
if (res != SHM_MQ_SUCCESS)
return res;
if (rb > still_needed)
rb = still_needed;
}
/* Return the complete message, and reset for next message. */
*nbytesp = nbytes;
*datap = mqh->mqh_buffer;
mqh->mqh_did_length_word = false;
mqh->mqh_partial_message_bytes = 0;
return SHM_MQ_SUCCESS;
}
/*
* Wait for the other process that's supposed to use this queue to attach
* to it.
*
* The return value is SHM_MQ_DETACHED if the worker has already detached or
* if it dies; it is SHM_MQ_SUCCESS if we detect that the worker has attached.
* Note that we will only be able to detect that the worker has died before
* attaching if a background worker handle was passed to shm_mq_attach().
*/
shm_mq_result
shm_mq_wait_for_attach(shm_mq_handle *mqh)
{
shm_mq *mq = mqh->mqh_queue;
PGPROC **victim;
if (shm_mq_get_receiver(mq) == MyProc)
victim = &mq->mq_sender;
else
{
Assert(shm_mq_get_sender(mq) == MyProc);
victim = &mq->mq_receiver;
}
if (shm_mq_wait_internal(mq, victim, mqh->mqh_handle))
return SHM_MQ_SUCCESS;
else
return SHM_MQ_DETACHED;
}
/*
* Detach a shared message queue.
*
* The purpose of this function is to make sure that the process
* with which we're communicating doesn't block forever waiting for us to
* fill or drain the queue once we've lost interest. Whem the sender
* detaches, the receiver can read any messages remaining in the queue;
* further reads will return SHM_MQ_DETACHED. If the receiver detaches,
* further attempts to send messages will likewise return SHM_MQ_DETACHED.
*/
void
shm_mq_detach(shm_mq *mq)
{
volatile shm_mq *vmq = mq;
PGPROC *victim;
SpinLockAcquire(&mq->mq_mutex);
if (vmq->mq_sender == MyProc)
victim = vmq->mq_receiver;
else
{
Assert(vmq->mq_receiver == MyProc);
victim = vmq->mq_sender;
}
vmq->mq_detached = true;
SpinLockRelease(&mq->mq_mutex);
if (victim != NULL)
SetLatch(&victim->procLatch);
}
/*
* Write bytes into a shared message queue.
*/
static shm_mq_result
shm_mq_send_bytes(shm_mq_handle *mqh, uint64 nbytes, void *data, bool nowait,
uint64 *bytes_written)
{
shm_mq *mq = mqh->mqh_queue;
uint64 sent = 0;
uint64 used;
uint64 ringsize = mq->mq_ring_size;
uint64 available;
while (sent < nbytes)
{
bool detached;
uint64 rb;
/* Compute number of ring buffer bytes used and available. */
rb = shm_mq_get_bytes_read(mq, &detached);
Assert(mq->mq_bytes_written >= rb);
used = mq->mq_bytes_written - rb;
Assert(used <= ringsize);
available = Min(ringsize - used, nbytes - sent);
/* Bail out if the queue has been detached. */
if (detached)
return SHM_MQ_DETACHED;
if (available == 0)
{
shm_mq_result res;
/*
* The queue is full, so if the receiver isn't yet known to be
* attached, we must wait for that to happen.
*/
if (!mqh->mqh_counterparty_attached)
{
if (nowait)
{
if (shm_mq_get_receiver(mq) == NULL)
return SHM_MQ_WOULD_BLOCK;
}
else if (!shm_mq_wait_internal(mq, &mq->mq_receiver,
mqh->mqh_handle))
{
mq->mq_detached = true;
return SHM_MQ_DETACHED;
}
mqh->mqh_counterparty_attached = true;
}
/* Let the receiver know that we need them to read some data. */
res = shm_mq_notify_receiver(mq);
if (res != SHM_MQ_SUCCESS)
{
*bytes_written = res;
return res;
}
/* Skip manipulation of our latch if nowait = true. */
if (nowait)
{
*bytes_written = sent;
return SHM_MQ_WOULD_BLOCK;
}
/*
* Wait for our latch to be set. It might already be set for
* some unrelated reason, but that'll just result in one extra
* trip through the loop. It's worth it to avoid resetting the
* latch at top of loop, because setting an already-set latch is
* much cheaper than setting one that has been reset.
*/
WaitLatch(&MyProc->procLatch, WL_LATCH_SET, 0);
/* An interrupt may have occurred while we were waiting. */
CHECK_FOR_INTERRUPTS();
/* Reset the latch so we don't spin. */
ResetLatch(&MyProc->procLatch);
}
else
{
uint64 offset = mq->mq_bytes_written % ringsize;
uint64 sendnow = Min(available, ringsize - offset);
/* Write as much data as we can via a single memcpy(). */
memcpy(&mq->mq_ring[mq->mq_ring_offset + offset],
(char *) data + sent, sendnow);
sent += sendnow;
/*
* Update count of bytes written, with alignment padding. Note
* that this will never actually insert any padding except at the
* end of a run of bytes, because the buffer size is a multiple of
* MAXIMUM_ALIGNOF, and each read is as well.
*/
Assert(sent == nbytes || sendnow == MAXALIGN64(sendnow));
shm_mq_inc_bytes_written(mq, MAXALIGN64(sendnow));
/*
* For efficiency, we don't set the reader's latch here. We'll
* do that only when the buffer fills up or after writing an
* entire message.
*/
}
}
*bytes_written = sent;
return SHM_MQ_SUCCESS;
}
/*
* Wait until at least *nbytesp bytes are available to be read from the
* shared message queue, or until the buffer wraps around. On return,
* *datap is set to the location at which data bytes can be read. The
* return value is the number of bytes available to be read starting at
* that offset; if the message has wrapped the buffer, it may be less than
* bytes_needed.
*/
static shm_mq_result
shm_mq_receive_bytes(shm_mq *mq, uint64 bytes_needed, bool nowait,
uint64 *nbytesp, void **datap)
{
uint64 used;
uint64 ringsize = mq->mq_ring_size;
uint64 written;
for (;;)
{
uint64 offset;
bool detached;
/* Get bytes written, so we can compute what's available to read. */
written = shm_mq_get_bytes_written(mq, &detached);
used = written - mq->mq_bytes_read;
Assert(used <= ringsize);
offset = mq->mq_bytes_read % ringsize;
/* If we have enough data or buffer has wrapped, we're done. */
if (used >= bytes_needed || offset + used >= ringsize)
{
*nbytesp = Min(used, ringsize - offset);
*datap = &mq->mq_ring[mq->mq_ring_offset + offset];
return SHM_MQ_SUCCESS;
}
/*
* Fall out before waiting if the queue has been detached.
*
* Note that we don't check for this until *after* considering
* whether the data already available is enough, since the
* receiver can finish receiving a message stored in the buffer
* even after the sender has detached.
*/
if (detached)
return SHM_MQ_DETACHED;
/* Skip manipulation of our latch if nowait = true. */
if (nowait)
return SHM_MQ_WOULD_BLOCK;
/*
* Wait for our latch to be set. It might already be set for
* some unrelated reason, but that'll just result in one extra
* trip through the loop. It's worth it to avoid resetting the
* latch at top of loop, because setting an already-set latch is
* much cheaper than setting one that has been reset.
*/
WaitLatch(&MyProc->procLatch, WL_LATCH_SET, 0);
/* An interrupt may have occurred while we were waiting. */
CHECK_FOR_INTERRUPTS();
/* Reset the latch so we don't spin. */
ResetLatch(&MyProc->procLatch);
}
}
/*
* This is used when a process is waiting for its counterpart to attach to the
* queue. We exit when the other process attaches as expected, or, if
* handle != NULL, when the referenced background process or the postmaster
* dies. Note that if handle == NULL, and the process fails to attach, we'll
* potentially get stuck here forever waiting for a process that may never
* start. We do check for interrupts, though.
*
* ptr is a pointer to the memory address that we're expecting to become
* non-NULL when our counterpart attaches to the queue.
*/
static bool
shm_mq_wait_internal(volatile shm_mq *mq, PGPROC * volatile *ptr,
BackgroundWorkerHandle *handle)
{
bool save_set_latch_on_sigusr1;
bool result = false;
save_set_latch_on_sigusr1 = set_latch_on_sigusr1;
if (handle != NULL)
set_latch_on_sigusr1 = true;
PG_TRY();
{
for (;;)
{
BgwHandleStatus status;
pid_t pid;
bool detached;
/* Acquire the lock just long enough to check the pointer. */
SpinLockAcquire(&mq->mq_mutex);
detached = mq->mq_detached;
result = (*ptr != NULL);
SpinLockRelease(&mq->mq_mutex);
/* Fail if detached; else succeed if initialized. */
if (detached)
{
result = false;
break;
}
if (result)
break;
if (handle != NULL)
{
/* Check for unexpected worker death. */
status = GetBackgroundWorkerPid(handle, &pid);
if (status != BGWH_STARTED && status != BGWH_NOT_YET_STARTED)
{
result = false;
break;
}
}
/* Wait to be signalled. */
WaitLatch(&MyProc->procLatch, WL_LATCH_SET, 0);
/* An interrupt may have occurred while we were waiting. */
CHECK_FOR_INTERRUPTS();
/* Reset the latch so we don't spin. */
ResetLatch(&MyProc->procLatch);
}
}
PG_CATCH();
{
set_latch_on_sigusr1 = save_set_latch_on_sigusr1;
PG_RE_THROW();
}
PG_END_TRY();
return result;
}
/*
* Get the number of bytes read. The receiver need not use this to access
* the count of bytes read, but the sender must.
*/
static uint64
shm_mq_get_bytes_read(volatile shm_mq *mq, bool *detached)
{
uint64 v;
SpinLockAcquire(&mq->mq_mutex);
v = mq->mq_bytes_read;
*detached = mq->mq_detached;
SpinLockRelease(&mq->mq_mutex);
return v;
}
/*
* Increment the number of bytes read.
*/
static void
shm_mq_inc_bytes_read(volatile shm_mq *mq, uint64 n)
{
PGPROC *sender;
SpinLockAcquire(&mq->mq_mutex);
mq->mq_bytes_read += n;
sender = mq->mq_sender;
SpinLockRelease(&mq->mq_mutex);
/* We shoudn't have any bytes to read without a sender. */
Assert(sender != NULL);
SetLatch(&sender->procLatch);
}
/*
* Get the number of bytes written. The sender need not use this to access
* the count of bytes written, but the reciever must.
*/
static uint64
shm_mq_get_bytes_written(volatile shm_mq *mq, bool *detached)
{
uint64 v;
SpinLockAcquire(&mq->mq_mutex);
v = mq->mq_bytes_written;
*detached = mq->mq_detached;
SpinLockRelease(&mq->mq_mutex);
return v;
}
/*
* Increment the number of bytes written.
*/
static void
shm_mq_inc_bytes_written(volatile shm_mq *mq, uint64 n)
{
SpinLockAcquire(&mq->mq_mutex);
mq->mq_bytes_written += n;
SpinLockRelease(&mq->mq_mutex);
}
/*
* Set sender's latch, unless queue is detached.
*/
static shm_mq_result
shm_mq_notify_receiver(volatile shm_mq *mq)
{
PGPROC *receiver;
bool detached;
SpinLockAcquire(&mq->mq_mutex);
detached = mq->mq_detached;
receiver = mq->mq_receiver;
SpinLockRelease(&mq->mq_mutex);
if (detached)
return SHM_MQ_DETACHED;
if (receiver)
SetLatch(&receiver->procLatch);
return SHM_MQ_SUCCESS;
}
/* Shim for on_dsm_callback. */
static void
shm_mq_detach_callback(dsm_segment *seg, Datum arg)
{
shm_mq *mq = (shm_mq *) DatumGetPointer(arg);
shm_mq_detach(mq);
}

70
src/include/storage/shm_mq.h
Unescape View File

@ -0,0 +1,70 @@
/*-------------------------------------------------------------------------
*
* shm_mq.h
* single-reader, single-writer shared memory message queue
*
* Portions Copyright (c) 1996-2013, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
* src/include/storage/shm_mq.h
*
*-------------------------------------------------------------------------
*/
#ifndef SHM_MQ_H
#define SHM_MQ_H
#include "postmaster/bgworker.h"
#include "storage/dsm.h"
#include "storage/proc.h"
/* The queue itself, in shared memory. */
struct shm_mq;
typedef struct shm_mq shm_mq;
/* Backend-private state. */
struct shm_mq_handle;
typedef struct shm_mq_handle shm_mq_handle;
/* Possible results of a send or receive operation. */
typedef enum
{
SHM_MQ_SUCCESS, /* Sent or received a message. */
SHM_MQ_WOULD_BLOCK, /* Not completed; retry later. */
SHM_MQ_DETACHED /* Other process has detached queue. */
} shm_mq_result;
/*
* Primitives to create a queue and set the sender and receiver.
*
* Both the sender and the receiver must be set before any messages are read
* or written, but they need not be set by the same process. Each must be
* set exactly once.
*/
extern shm_mq *shm_mq_create(void *address, Size size);
extern void shm_mq_set_receiver(shm_mq *mq, PGPROC *);
extern void shm_mq_set_sender(shm_mq *mq, PGPROC *);
/* Accessor methods for sender and receiver. */
extern PGPROC *shm_mq_get_receiver(shm_mq *);
extern PGPROC *shm_mq_get_sender(shm_mq *);
/* Set up backend-local queue state. */
extern shm_mq_handle *shm_mq_attach(shm_mq *mq, dsm_segment *seg,
BackgroundWorkerHandle *handle);
/* Break connection. */
extern void shm_mq_detach(shm_mq *);
/* Send or receive messages. */
extern shm_mq_result shm_mq_send(shm_mq_handle *mqh,
uint64 nbytes, void *data, bool nowait);
extern shm_mq_result shm_mq_receive(shm_mq_handle *mqh,
uint64 *nbytesp, void **datap, bool nowait);
/* Wait for our counterparty to attach to the queue. */
extern shm_mq_result shm_mq_wait_for_attach(shm_mq_handle *mqh);
/* Smallest possible queue. */
extern const Size shm_mq_minimum_size;
#endif /* SHM_MQ_H */
Write Preview
Loading…
Cancel
Save