Predicate locks are used on per page basis only if fastupdate = off, in
opposite case predicate lock on pending list will effectively lock whole index,
to reduce locking overhead, just lock a relation. Entry and posting trees are
essentially B-tree, so locks are acquired on leaf pages only.
Author: Shubham Barai with some editorization by me and Dmitry Ivanov
Review by: Alexander Korotkov, Dmitry Ivanov, Fedor Sigaev
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPt5sWW+EwTaKUGFL5_XFcZ0MuGBcyJ70oqbWqr42YKR8Q@mail.gmail.com
The original idea was that we could use an isNull-style bool array
directly as a GinNullCategory array. However, the existing code already
acknowledges that that doesn't really work, because of the possibility
that bool as currently defined can have arbitrary bit patterns for true
values. So it has to loop through the nullFlags array to set each bool
value to an acceptable value. But if we are looping through the whole
array anyway, we might as well build a proper GinNullCategory array
instead and abandon the type casting. That makes the code much safer in
case bool is ever changed to something else.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Previously, these index types left the pd_lower field set to the default
SizeOfPageHeaderData, which is really a lie because it ought to point past
whatever space is being used for metadata. The coding accidentally failed
to fail because we never told xlog.c that the metapage is of standard
format --- but that's not very good, because it impedes WAL consistency
checking, and in some cases prevents compression of full-page images.
To fix, ensure that we set pd_lower correctly, not only when creating a
metapage but whenever we write it out (these apparently redundant steps are
needed to cope with pg_upgrade'd indexes that don't yet contain the right
value). This allows telling xlog.c that the page is of standard format.
The WAL consistency check mask functions are made to mask only if pd_lower
appears valid, which I think is likely unnecessary complication, since
any metapage appearing in a v11 WAL stream should contain valid pd_lower.
But it doesn't cost much to be paranoid.
Amit Langote, reviewed by Michael Paquier and Amit Kapila
Discussion: https://postgr.es/m/0d273805-0e9e-ec1a-cb84-d4da400b8f85@lab.ntt.co.jp
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
In combination with 569174f1be, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
The xlog-specific headers need to be included in both frontend code -
specifically, pg_waldump - and the backend, but the remainder of the
private headers for each index are only needed by the backend. By
splitting the xlog stuff out into separate headers, pg_waldump pulls
in fewer backend headers, which is a good thing.
Patch by me, reviewed by Michael Paquier and Andres Freund, per a
complaint from Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoZ=F=GkxV0YEv-A8tb+AEGy_Qa7GSiJ8deBKFATnzfEug@mail.gmail.com
This patch doesn't actually make any index AM parallel-aware, but it
provides the necessary functions at the AM layer to do so.
Rahila Syed, Amit Kapila, Robert Haas
We had thirty different GIN array opclasses sharing the same operators and
support functions. That still didn't cover all the built-in types, nor
did it cover arrays of extension-added types. What we want is a single
polymorphic opclass for "anyarray". There were two missing features needed
to make this possible:
1. We have to be able to declare the index storage type as ANYELEMENT
when the opclass is declared to index ANYARRAY. This just takes a few
more lines in index_create(). Although this currently seems of use only
for GIN, there's no reason to make index_create() restrict it to that.
2. We have to be able to identify the proper GIN compare function for
the index storage type. This patch proceeds by making the compare function
optional in GIN opclass definitions, and specifying that the default btree
comparison function for the index storage type will be looked up when the
opclass omits it. Again, that seems pretty generically useful.
Since the comparison function lookup is done in initGinState(), making
use of the second feature adds an additional cache lookup to GIN index
access setup. It seems unlikely that that would be very noticeable given
the other costs involved, but maybe at some point we should consider
making GinState data persist longer than it now does --- we could keep it
in the index relcache entry, perhaps.
Rather fortuitously, we don't seem to need to do anything to get this
change to play nice with dump/reload or pg_upgrade scenarios: the new
opclass definition is automatically selected to replace existing index
definitions, and the on-disk data remains compatible. Also, if a user has
created a custom opclass definition for a non-builtin type, this doesn't
break that, since CREATE INDEX will prefer an exact match to opcintype
over a match to ANYARRAY. However, if there's anyone out there with
handwritten DDL that explicitly specifies _bool_ops or one of the other
replaced opclass names, they'll need to adjust that.
Tom Lane, reviewed by Enrique Meneses
Discussion: <14436.1470940379@sss.pgh.pa.us>
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
Previously the maximum size of GIN pending list was controlled only by
work_mem. But the reasonable value of work_mem and the reasonable size
of the list are basically not the same, so it was not appropriate to
control both of them by only one GUC, i.e., work_mem. This commit
separates new GUC, pending_list_cleanup_size, from work_mem to allow
users to control only the size of the list.
Also this commit adds pending_list_cleanup_size as new storage parameter
to allow users to specify the size of the list per index. This is useful,
for example, when users want to increase the size of the list only for
the GIN index which can be updated heavily, and decrease it otherwise.
Reviewed by Etsuro Fujita.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
With the GIN "fast scan" feature, GIN can skip items without fetching all
the keys for them, if it can prove that they don't match regardless of
those keys. So far, it has done the proving by calling the boolean
consistent function with all combinations of TRUE/FALSE for the unfetched
keys, but since that's O(n^2), it becomes unfeasible with more than a few
keys. We can avoid calling consistent with all the combinations, if we can
tell the operator class implementation directly which keys are unknown.
This commit includes a triConsistent function for the built-in array and
tsvector opclasses.
Alexander Korotkov, with some changes by me.
Remove use of PageSetTLI() from all page manipulation functions
and adjust README to indicate change in the way we make changes
to pages. Repurpose those bytes into the pd_checksum field and
explain how that works in comments about page header.
Refactoring ahead of actual feature patch which would make use
of the checksum field, arriving later.
Jeff Davis, with comments and doc changes by Simon Riggs
Direction suggested by Robert Haas; many others providing
review comments.
Experimentation with contrib/btree_gist shows that the majority of the GIST
support functions potentially need collation information. Safest policy
seems to be to pass it to all of them, instead of making assumptions about
which ones could possibly need it.
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
Honor index column's collation spec if there is one, don't go to the
expense of calling get_typcollation when we can reasonably assume that
all GIN storage types will use default collation, and be sure to set
a collation for the comparePartialFn too.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
Per my recent proposal(s). Null key datums can now be returned by
extractValue and extractQuery functions, and will be stored in the index.
Also, placeholder entries are made for indexable items that are NULL or
contain no keys according to extractValue. This means that the index is
now always complete, having at least one entry for every indexed heap TID,
and so we can get rid of the prohibition on full-index scans. A full-index
scan is implemented much the same way as partial-match scans were already:
we build a bitmap representing all the TIDs found in the index, and then
drive the results off that.
Also, introduce a concept of a "search mode" that can be requested by
extractQuery when the operator requires matching to empty items (this is
just as cheap as matching to a single key) or requires a full index scan
(which is not so cheap, but it sure beats failing or giving wrong answers).
The behavior remains backward compatible for opclasses that don't return
any null keys or request a non-default search mode.
Using these features, we can now make the GIN index opclass for anyarray
behave in a way that matches the actual anyarray operators for &&, <@, @>,
and = ... which it failed to do before in assorted corner cases.
This commit fixes the core GIN code and ginarrayprocs.c, updates the
documentation, and adds some simple regression test cases for the new
behaviors using the array operators. The tsearch and contrib GIN opclass
support functions still need to be looked over and probably fixed.
Another thing I intend to fix separately is that this is pretty inefficient
for cases where more than one scan condition needs a full-index search:
we'll run duplicate GinScanEntrys, each one of which builds a large bitmap.
There is some existing logic to merge duplicate GinScanEntrys but it needs
refactoring to make it work for entries belonging to different scan keys.
Note that most of gin.h has been split out into a new file gin_private.h,
so that gin.h doesn't export anything that's not supposed to be used by GIN
opclasses or the rest of the backend. I did quite a bit of other code
beautification work as well, mostly fixing comments and choosing more
appropriate names for things.
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
The GIN code has absolutely no business exporting GIN-specific functions
with names as generic as compareItemPointers() or newScanKey(); that's
just trouble waiting to happen. I got annoyed about this again just now
and decided to fix it. This commit ensures that all global symbols
defined in access/gin/ have names including "gin" or "Gin". There were a
couple of cases, like names involving "PostingItem", where arguably the
names were already sufficiently nongeneric; but I figured as long as I was
risking creating merge problems for unapplied GIN patches I might as well
impose a uniform policy.
I didn't touch any static symbol names. There might be some places
where it'd be appropriate to rename some static functions to match
siblings that are exported, but I'll leave that for another time.
The better estimate requires more statistics than we previously stored:
in particular, counts of "entry" versus "data" pages within the index,
as well as knowledge of the number of distinct key values. We collect
this information during initial index build and update it during VACUUM,
storing the info in new fields on the index metapage. No initdb is
required because these fields will read as zeroes in a pre-existing
index, and the new gincostestimate code is coded to behave (reasonably)
sanely if they are zeroes.
Teodor Sigaev, reviewed by Jan Urbanski, Tom Lane, and Itagaki Takahiro.
multiple index entries in a holding area before adding them to the main index
structure. This helps because bulk insert is (usually) significantly faster
than retail insert for GIN.
This patch also removes GIN support for amgettuple-style index scans. The
API defined for amgettuple is difficult to support with fastupdate, and
the previously committed partial-match feature didn't really work with
it either. We might eventually figure a way to put back amgettuple
support, but it won't happen for 8.4.
catversion bumped because of change in GIN's pg_am entry, and because
the format of GIN indexes changed on-disk (there's a metapage now,
and possibly a pending list).
Teodor Sigaev
a more complete framework for writing custom option processing routines
by user-defined access methods.
Catalog version bumped due to the general API changes, which are going to
affect user-defined "amoptions" routines.
Teodor Sigaev