100 Commits (055fee7eb4dcc78e58672aef146334275e1cc40d)

Author	SHA1	Message	Date
Alvaro Herrera	71f4c8c6f7	ALTER TABLE ... DETACH PARTITION ... CONCURRENTLY ... Allow a partition be detached from its partitioned table without blocking concurrent queries, by running in two transactions and only requiring ShareUpdateExclusive in the partitioned table. Because it runs in two transactions, it cannot be used in a transaction block. This is the main reason to use dedicated syntax: so that users can choose to use the original mode if they need it. But also, it doesn't work when a default partition exists (because an exclusive lock would still need to be obtained on it, in order to change its partition constraint.) In case the second transaction is cancelled or a crash occurs, there's ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final steps. The main trick to make this work is the addition of column pg_inherits.inhdetachpending, initially false; can only be set true in the first part of this command. Once that is committed, concurrent transactions that use a PartitionDirectory will include or ignore partitions so marked: in optimizer they are ignored if the row is marked committed for the snapshot; in executor they are always included. As a result, and because of the way PartitionDirectory caches partition descriptors, queries that were planned before the detach will see the rows in the detached partition and queries that are planned after the detach, won't. A CHECK constraint is created that duplicates the partition constraint. This is probably not strictly necessary, and some users will prefer to remove it afterwards, but if the partition is re-attached to a partitioned table, the constraint needn't be rechecked. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql	5 years ago
Tomas Vondra	927f453a94	Fix tuple routing to initialize batching only for inserts ... A cross-partition update on a partitioned table is implemented as a delete followed by an insert. With foreign partitions, this was however causing issues, because the FDW and core may disagree on when to enable batching. postgres_fdw was only allowing batching for plain inserts (CMD_INSERT) while core was trying to batch the insert component of the cross-partition update. Fix by restricting core to apply batching only to plain CMD_INSERT queries. It's possible to allow batching for cross-partition updates, but that will require more extensive changes, so better to leave that for a separate patch. Author: Amit Langote Reviewed-by: Tomas Vondra, Takayuki Tsunakawa Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development	5 years ago
Heikki Linnakangas	6214e2b228	Fix permission checks on constraint violation errors on partitions. ... If a cross-partition UPDATE violates a constraint on the target partition, and the columns in the new partition are in different physical order than in the parent, the error message can reveal columns that the user does not have SELECT permission on. A similar bug was fixed earlier in commit 804b6b6db4. The cause of the bug is that the callers of the ExecBuildSlotValueDescription() function got confused when constructing the list of modified columns. If the tuple was routed from a parent, we converted the tuple to the parent's format, but the list of modified columns was grabbed directly from the child's RTE entry. ExecUpdateLockMode() had a similar issue. That lead to confusion on which columns are key columns, leading to wrong tuple lock being taken on tables referenced by foreign keys, when a row is updated with INSERT ON CONFLICT UPDATE. A new isolation test is added for that corner case. With this patch, the ri_RangeTableIndex field is no longer set for partitions that don't have an entry in the range table. Previously, it was set to the RTE entry of the parent relation, but that was confusing. NOTE: This modifies the ResultRelInfo struct, replacing the ri_PartitionRoot field with ri_RootResultRelInfo. That's a bit risky to backpatch, because it breaks any extensions accessing the field. The change that ri_RangeTableIndex is not set for partitions could potentially break extensions, too. The ResultRelInfos are visible to FDWs at least, and this patch required small changes to postgres_fdw. Nevertheless, this seem like the least bad option. I don't think these fields widely used in extensions; I don't think there are FDWs out there that uses the FDW "direct update" API, other than postgres_fdw. If there is, you will get a compilation error, so hopefully it is caught quickly. Backpatch to 11, where support for both cross-partition UPDATEs, and unique indexes on partitioned tables, were added. Reviewed-by: Amit Langote Security: CVE-2021-3393	5 years ago
Tom Lane	1d9351a87c	Fix hash partition pruning with asymmetric partition sets. ... perform_pruning_combine_step() was not taught about the number of partition indexes used in hash partitioning; more embarrassingly, get_matching_hash_bounds() also had it wrong. These errors are masked in the common case where all the partitions have the same modulus and no partition is missing. However, with missing or unequal-size partitions, we could erroneously prune some partitions that need to be scanned, leading to silently wrong query answers. While a minimal-footprint fix for this could be to export get_partition_bound_num_indexes and make the incorrect functions use it, I'm of the opinion that that function should never have existed in the first place. It's not reasonable data structure design that PartitionBoundInfoData lacks any explicit record of the length of its indexes[] array. Perhaps that was all right when it could always be assumed equal to ndatums, but something should have been done about it as soon as that stopped being true. Putting in an explicit "nindexes" field makes both partition_bounds_equal() and partition_bounds_copy() simpler, safer, and faster than before, and removes explicit knowledge of the number-of-partition-indexes rules from some other places too. This change also makes get_hash_partition_greatest_modulus obsolete. I left that in place in case any external code uses it, but no core code does anymore. Per bug #16840 from Michał Albrycht. Back-patch to v11 where the hash partitioning code came in. (In the back branches, add the new field at the end of PartitionBoundInfoData to minimize ABI risks.) Discussion: https://postgr.es/m/16840-571a22976f829ad4@postgresql.org	5 years ago
Tomas Vondra	b663a41363	Implement support for bulk inserts in postgres_fdw ... Extends the FDW API to allow batching inserts into foreign tables. That is usually much more efficient than inserting individual rows, due to high latency for each round-trip to the foreign server. It was possible to implement something similar in the regular FDW API, but it was inconvenient and there were issues with reporting the number of actually inserted rows etc. This extends the FDW API with two new functions: * GetForeignModifyBatchSize - allows the FDW picking optimal batch size * ExecForeignBatchInsert - inserts a batch of rows at once Currently, only INSERT queries support batching. Support for DELETE and UPDATE may be added in the future. This also implements batching for postgres_fdw. The batch size may be specified using "batch_size" option both at the server and table level. The initial patch version was written by me, but it was rewritten and improved in many ways by Takayuki Tsunakawa. Author: Takayuki Tsunakawa Reviewed-by: Tomas Vondra, Amit Langote Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development	5 years ago
Bruce Momjian	ca3b37487b	Update copyright for 2021 ... Backpatch-through: 9.5	5 years ago
Tom Lane	b3817f5f77	Improve hash_create()'s API for some added robustness. ... Invent a new flag bit HASH_STRINGS to specify C-string hashing, which was formerly the default; and add assertions insisting that exactly one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set. This is in hopes of preventing recurrences of the type of oversight fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS). Also, when HASH_STRINGS is specified, insist that the keysize be more than 8 bytes. This is a heuristic, but it should catch accidental use of HASH_STRINGS for integer or pointer keys. (Nearly all existing use-cases set the keysize to NAMEDATALEN or more, so there's little reason to think this restriction should be problematic.) Tweak hash_create() to insist that the HASH_ELEM flag be set, and remove the defaults it had for keysize and entrysize. Since those defaults were undocumented and basically useless, no callers omitted HASH_ELEM anyway. Also, remove memset's zeroing the HASHCTL parameter struct from those callers that had one. This has never been really necessary, and while it wasn't a bad coding convention it was confusing that some callers did it and some did not. We might as well save a few cycles by standardizing on "not". Also improve the documentation for hash_create(). In passing, improve reinit.c's usage of a hash table by storing the key as a binary Oid rather than a string; and, since that's a temporary hash table, allocate it in CurrentMemoryContext for neatness. Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us	5 years ago
Heikki Linnakangas	fb5883da86	Remove PartitionRoutingInfo struct. ... The extra indirection neeeded to access its members via its enclosing ResultRelInfo seems pointless. Move all the fields from PartitionRoutingInfo to ResultRelInfo. Author: Amit Langote Reviewed-by: Alvaro Herrera Discussion: https://www.postgresql.org/message-id/CA%2BHiwqFViT47Zbr_ASBejiK7iDG8%3DQ1swQ-tjM6caRPQ67pT%3Dw%40mail.gmail.com	5 years ago
Heikki Linnakangas	6973533650	Revise child-to-root tuple conversion map management. ... Store the tuple conversion map to convert a tuple from a child table's format to the root format in a new ri_ChildToRootMap field in ResultRelInfo. It is initialized if transition tuple capture for FOR STATEMENT triggers or INSERT tuple routing on a partitioned table is needed. Previously, ModifyTable kept the maps in the per-subplan ModifyTableState->mt_per_subplan_tupconv_maps array, or when tuple routing was used, in ResultRelInfo->ri_Partitioninfo->pi_PartitionToRootMap. The new field replaces both of those. Now that the child-to-root tuple conversion map is always available in ResultRelInfo (when needed), remove the TransitionCaptureState.tcs_map field. The callers of Exec*Trigger() functions no longer need to set or save it, which is much less confusing and bug-prone. Also, as a future optimization, this will allow us to delay creating the map for a given result relation until the relation is actually processed during execution. Author: Amit Langote Discussion: https://www.postgresql.org/message-id/CA%2BHiwqHtCWLdK-LO%3DNEsvOdHx%2B7yv4mE_zYK0i3BH7dXb-wxog%40mail.gmail.com	5 years ago
Tom Lane	2000b6c10a	Don't fetch partition check expression during InitResultRelInfo. ... Since there is only one place that actually needs the partition check expression, namely ExecPartitionCheck, it's better to fetch it from the relcache there. In this way we will never fetch it at all if the query never has use for it, and we still fetch it just once when we do need it. The reason for taking an interest in this is that if the relcache doesn't already have the check expression cached, fetching it requires obtaining AccessShareLock on the partition root. That means that operations that look like they should only touch the partition itself will also take a lock on the root. In particular we observed that TRUNCATE on a partition may take a lock on the partition's root, contributing to a deadlock situation in parallel pg_restore. As written, this patch does have a small cost, which is that we are microscopically reducing efficiency for the case where a partition has an empty check expression. ExecPartitionCheck will be called, and will go through the motions of setting up and checking an empty qual, where before it would not have been called at all. We could avoid that by adding a separate boolean flag to track whether there is a partition expression to test. However, this case only arises for a default partition with no siblings, which surely is not an interesting case in practice. Hence adding complexity for it does not seem like a good trade-off. Amit Langote, per a suggestion by me Discussion: https://postgr.es/m/VI1PR03MB31670CA1BD9625C3A8C5DD05EB230@VI1PR03MB3167.eurprd03.prod.outlook.com	5 years ago
Alvaro Herrera	f481d28232	Check default partitions constraints while descending ... Partitioning tuple route code assumes that the partition chosen while descending the partition hierarchy is always the correct one. This is true except when the partition is the default partition and another partition has been added concurrently: the partition constraint changes and we don't recheck it. This can lead to tuples mistakenly being added to the default partition that should have been rejected. Fix by rechecking the default partition constraint while descending the hierarchy. An isolation test based on the reproduction steps described by Hao Wu (with tweaks for extra coverage) is included. Backpatch to 12, where this bug came in with 898e5e3290. Reported by: Hao Wu <hawu@vmware.com> Author: Amit Langote <amitlangote09@gmail.com> Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Discussion: https://postgr.es/m/CA+HiwqFqBmcSSap4sFnCBUEL_VfOMmEKaQ3gwUhyfa4c7J_-nA@mail.gmail.com Discussion: https://postgr.es/m/DM5PR0501MB3910E97A9EDFB4C775CF3D75A42F0@DM5PR0501MB3910.namprd05.prod.outlook.com	5 years ago
Tom Lane	7a980dfc6c	Fix matching of sub-partitions when a partitioned plan is stale. ... Since we no longer require AccessExclusiveLock to add a partition, the executor may see that a partitioned table has more partitions than the planner saw. ExecCreatePartitionPruneState's code for matching up the partition lists in such cases was faulty, and would misbehave if the planner had successfully pruned any partitions from the query. (Thus, trouble would occur only if a partition addition happens concurrently with a query that uses both static and dynamic partition pruning.) This led to an Assert failure in debug builds, and probably to crashes or query misbehavior in production builds. To repair the bug, just explicitly skip zeroes in the plan's relid_map[] list. I also made some cosmetic changes to make the code more readable (IMO anyway). Also, convert the cross-checking Assert to a regular test-and-elog, since it's now apparent that this logic is more fragile than one would like. Currently, there's no way to repeatably exercise this code, except with manual use of a debugger to stop the backend between planning and execution. Hence, no test case in this patch. We oughta do something about that testability gap, but that's for another day. Amit Langote and Tom Lane, per report from Justin Pryzby. Oversight in commit 898e5e329; backpatch to v12 where that appeared. Discussion: https://postgr.es/m/20200802181131.GA27754@telsasoft.com	5 years ago
Amit Kapila	33753ac9d7	Add object names to partition integrity violations. ... All errors of SQLSTATE class 23 should include the name of an object associated with the error in separate fields of the error report message. We do this so that applications need not try to extract them from the possibly-localized human-readable text of the message. Reported-by: Chris Bandy Author: Chris Bandy Reviewed-by: Amit Kapila and Amit Langote Discussion: https://postgr.es/m/0aa113a3-3c7f-db48-bcd8-f9290b2269ae@gmail.com	6 years ago
Peter Eisentraut	3c173a53a8	Remove utils/acl.h from catalog/objectaddress.h ... The need for this was removed by 8b9e9644dc. A number of files now need to include utils/acl.h or parser/parse_node.h explicitly where they previously got it indirectly somehow. Since parser/parse_node.h already includes nodes/parsenodes.h, the latter is then removed where the former was added. Also, remove nodes/pg_list.h from objectaddress.h, since that's included via nodes/parsenodes.h. Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> Discussion: https://www.postgresql.org/message-id/flat/7601e258-26b2-8481-36d0-dc9dca6f28f1%402ndquadrant.com	6 years ago
Bruce Momjian	7559d8ebfa	Update copyrights for 2020 ... Backpatch-through: update all files in master, backpatch legal files through 9.4	6 years ago
Tom Lane	5b9312378e	Load relcache entries' partitioning data on-demand, not immediately. ... Formerly the rd_partkey and rd_partdesc data structures were always populated immediately when a relcache entry was built or rebuilt. This patch changes things so that they are populated only when they are first requested. (Hence, callers *must* now always use RelationGetPartitionKey or RelationGetPartitionDesc; just fetching the pointer directly is no longer acceptable.) This seems to have some performance benefits, but the main reason to do it is that it eliminates a recursive-reload failure that occurs if the partkey or partdesc expressions contain any references to the relation's rowtype (as discovered by Amit Langote). In retrospect, since loading these data structures might result in execution of nearly-arbitrary code via eval_const_expressions, it was a dumb idea to require that to happen during relcache entry rebuild. Also, fix things so that old copies of a relcache partition descriptor will be dropped when the cache entry's refcount goes to zero. In the previous coding it was possible for such copies to survive for the lifetime of the session, as I'd complained of in a previous discussion. (This management technique still isn't perfect, but it's better than before.) Improve the commentary explaining how that works and why it's safe to hand out direct pointers to these relcache substructures. In passing, improve RelationBuildPartitionDesc by using the same memory-context-parent-swap approach used by RelationBuildPartitionKey, thereby making it less dependent on strong assumptions about what partition_bounds_copy does. Avoid doing get_rel_relkind in the critical section, too. Patch by Amit Langote and Tom Lane; Robert Haas deserves some credit for prior work in the area, too. Although this is a pre-existing problem, no back-patch: the patch seems too invasive to be safe to back-patch, and the bug it fixes is a corner case that seems relatively unlikely to cause problems in the field. Discussion: https://postgr.es/m/CA+HiwqFUzjfj9HEsJtYWcr1SgQ_=iCAvQ=O2Sx6aQxoDu4OiHw@mail.gmail.com Discussion: https://postgr.es/m/CA+TgmoY3bRmGB6-DUnoVy5fJoreiBJ43rwMrQRCdPXuKt4Ykaw@mail.gmail.com	6 years ago
Michael Paquier	e1551f96e6	Refactor attribute mappings used in logical tuple conversion ... Tuple conversion support in tupconvert.c is able to convert rowtypes between two relations, inner and outer, which are logically equivalent but have a different ordering or even dropped columns (used mainly for inheritance tree and partitions). This makes use of attribute mappings, which are simple arrays made of AttrNumber elements with a length matching the number of attributes of the outer relation. The length of the attribute mapping has been treated as completely independent of the mapping itself until now, making it easy to pass down an incorrect mapping length. This commit refactors the code related to attribute mappings and moves it into an independent facility called attmap.c, extracted from tupconvert.c. This merges the attribute mapping with its length, avoiding to try to guess what is the length of a mapping to use as this is computed once, when the map is built. This will avoid mistakes like what has been fixed in dc816e58, which has used an incorrect mapping length by matching it with the number of attributes of an inner relation (a child partition) instead of an outer relation (a partitioned table). Author: Michael Paquier Reviewed-by: Amit Langote Discussion: https://postgr.es/m/20191121042556.GD153437@paquier.xyz	6 years ago
Alvaro Herrera	fe66125974	Remove 'msg' parameter from convert_tuples_by_name ... The message was included as a parameter when this function was added in dcb2bda9b7, but I don't think it has ever served any useful purpose. Let's stop spreading it pointlessly. Reviewed by Amit Langote and Peter Eisentraut. Discussion: https://postgr.es/m/20190806224728.GA17233@alvherre.pgsql	6 years ago
David Rowley	1e6a759838	Use appendBinaryStringInfo in more places where the length is known ... When we already know the length that we're going to append, then it makes sense to use appendBinaryStringInfo instead of appendStringInfoString so that the append can be performed with a simple memcpy() using a known length rather than having to first perform a strlen() call to obtain the length. Discussion: https://postgr.es/m/CAKJS1f8+FRAM1s5+mAa3isajeEoAaicJ=4e0WzrH3tAusbbiMQ@mail.gmail.com	7 years ago
Tom Lane	1cff1b95ab	Represent Lists as expansible arrays, not chains of cons-cells. ... Originally, Postgres Lists were a more or less exact reimplementation of Lisp lists, which consist of chains of separately-allocated cons cells, each having a value and a next-cell link. We'd hacked that once before (commit d0b4399d8) to add a separate List header, but the data was still in cons cells. That makes some operations -- notably list_nth() -- O(N), and it's bulky because of the next-cell pointers and per-cell palloc overhead, and it's very cache-unfriendly if the cons cells end up scattered around rather than being adjacent. In this rewrite, we still have List headers, but the data is in a resizable array of values, with no next-cell links. Now we need at most two palloc's per List, and often only one, since we can allocate some values in the same palloc call as the List header. (Of course, extending an existing List may require repalloc's to enlarge the array. But this involves just O(log N) allocations not O(N).) Of course this is not without downsides. The key difficulty is that addition or deletion of a list entry may now cause other entries to move, which it did not before. For example, that breaks foreach() and sister macros, which historically used a pointer to the current cons-cell as loop state. We can repair those macros transparently by making their actual loop state be an integer list index; the exposed "ListCell *" pointer is no longer state carried across loop iterations, but is just a derived value. (In practice, modern compilers can optimize things back to having just one loop state value, at least for simple cases with inline loop bodies.) In principle, this is a semantics change for cases where the loop body inserts or deletes list entries ahead of the current loop index; but I found no such cases in the Postgres code. The change is not at all transparent for code that doesn't use foreach() but chases lists "by hand" using lnext(). The largest share of such code in the backend is in loops that were maintaining "prev" and "next" variables in addition to the current-cell pointer, in order to delete list cells efficiently using list_delete_cell(). However, we no longer need a previous-cell pointer to delete a list cell efficiently. Keeping a next-cell pointer doesn't work, as explained above, but we can improve matters by changing such code to use a regular foreach() loop and then using the new macro foreach_delete_current() to delete the current cell. (This macro knows how to update the associated foreach loop's state so that no cells will be missed in the traversal.) There remains a nontrivial risk of code assuming that a ListCell * pointer will remain good over an operation that could now move the list contents. To help catch such errors, list.c can be compiled with a new define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents whenever that could possibly happen. This makes list operations significantly more expensive so it's not normally turned on (though it is on by default if USE_VALGRIND is on). There are two notable API differences from the previous code: * lnext() now requires the List's header pointer in addition to the current cell's address. * list_delete_cell() no longer requires a previous-cell argument. These changes are somewhat unfortunate, but on the other hand code using either function needs inspection to see if it is assuming anything it shouldn't, so it's not all bad. Programmers should be aware of these significant performance changes: * list_nth() and related functions are now O(1); so there's no major access-speed difference between a list and an array. * Inserting or deleting a list element now takes time proportional to the distance to the end of the list, due to moving the array elements. (However, it typically *doesn't* require palloc or pfree, so except in long lists it's probably still faster than before.) Notably, lcons() used to be about the same cost as lappend(), but that's no longer true if the list is long. Code that uses lcons() and list_delete_first() to maintain a stack might usefully be rewritten to push and pop at the end of the list rather than the beginning. * There are now list_insert_nth...() and list_delete_nth...() functions that add or remove a list cell identified by index. These have the data-movement penalty explained above, but there's no search penalty. * list_concat() and variants now copy the second list's data into storage belonging to the first list, so there is no longer any sharing of cells between the input lists. The second argument is now declared "const List *" to reflect that it isn't changed. This patch just does the minimum needed to get the new implementation in place and fix bugs exposed by the regression tests. As suggested by the foregoing, there's a fair amount of followup work remaining to do. Also, the ENABLE_LIST_COMPAT macros are finally removed in this commit. Code using those should have been gone a dozen years ago. Patch by me; thanks to David Rowley, Jesper Pedersen, and others for review. Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us	7 years ago
Tom Lane	8255c7a5ee	Phase 2 pgindent run for v12. ... Switch to 2.1 version of pg_bsd_indent. This formats multiline function declarations "correctly", that is with additional lines of parameter declarations indented to match where the first line's left parenthesis is. Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com	7 years ago
Tom Lane	be76af171c	Initial pgindent run for v12. ... This is still using the 2.0 version of pg_bsd_indent. I thought it would be good to commit this separately, so as to document the differences between 2.0 and 2.1 behavior. Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us	7 years ago
Tom Lane	6630ccad7a	Restructure creation of run-time pruning steps. ... Previously, gen_partprune_steps() always built executor pruning steps using all suitable clauses, including those containing PARAM_EXEC Params. This meant that the pruning steps were only completely safe for executor run-time (scan start) pruning. To prune at executor startup, we had to ignore the steps involving exec Params. But this doesn't really work in general, since there may be logic changes needed as well --- for example, pruning according to the last operator's btree strategy is the wrong thing if we're not applying that operator. The rules embodied in gen_partprune_steps() and its minions are sufficiently complicated that tracking their incremental effects in other logic seems quite impractical. Short of a complete redesign, the only safe fix seems to be to run gen_partprune_steps() twice, once to create executor startup pruning steps and then again for run-time pruning steps. We can save a few cycles however by noting during the first scan whether we rejected any clauses because they involved exec Params --- if not, we don't need to do the second scan. In support of this, refactor the internal APIs in partprune.c to make more use of passing information in the GeneratePruningStepsContext struct, rather than as separate arguments. This is, I hope, the last piece of our response to a bug report from Alan Jackson. Back-patch to v11 where this code came in. Discussion: https://postgr.es/m/FAD28A83-AC73-489E-A058-2681FA31D648@tvsquared.com	7 years ago
Etsuro Fujita	3a45321a49	Fix thinko in ExecCleanupTupleRouting(). ... Commit 3f2393edef changed ExecCleanupTupleRouting() so that it skipped cleaning up subplan resultrels before calling EndForeignInsert(), but that would cause an issue: when those resultrels were foreign tables, the FDWs would fail to shut down. Repair by skipping it after calling EndForeignInsert() as before. Author: Etsuro Fujita Reviewed-by: David Rowley and Amit Langote Discussion: https://postgr.es/m/5CAF3B8F.2090905@lab.ntt.co.jp	7 years ago
Andres Freund	86b85044e8	tableam: Add table_multi_insert() and revamp/speed-up COPY FROM buffering. ... This adds table_multi_insert(), and converts COPY FROM, the only user of heap_multi_insert, to it. A simple conversion of COPY FROM use slots would have yielded a slowdown when inserting into a partitioned table for some workloads. Different partitions might need different slots (both slot types and their descriptors), and dropping / creating slots when there's constant partition changes is measurable. Thus instead revamp the COPY FROM buffering for partitioned tables to allow to buffer inserts into multiple tables, flushing only when limits are reached across all partition buffers. By only dropping slots when there've been inserts into too many different partitions, the aforementioned overhead is gone. By allowing larger batches, even when there are frequent partition changes, we actuall speed such cases up significantly. By using slots COPY of very narrow rows into unlogged / temporary might slow down very slightly (due to the indirect function calls). Author: David Rowley, Andres Freund, Haribabu Kommi Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de https://postgr.es/m/20190327054923.t3epfuewxfqdt22e@alap3.anarazel.de	7 years ago
Tom Lane	428b260f87	Speed up planning when partitions can be pruned at plan time. ... Previously, the planner created RangeTblEntry and RelOptInfo structs for every partition of a partitioned table, even though many of them might later be deemed uninteresting thanks to partition pruning logic. This incurred significant overhead when there are many partitions. Arrange to postpone creation of these data structures until after we've processed the query enough to identify restriction quals for the partitioned table, and then apply partition pruning before not after creation of each partition's data structures. In this way we need not open the partition relations at all for partitions that the planner has no real interest in. For queries that can be proven at plan time to access only a small number of partitions, this patch improves the practical maximum number of partitions from under 100 to perhaps a few thousand. Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen, Yoshikazu Imai, and David Rowley Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp	7 years ago
Peter Eisentraut	5e1963fb76	Collations with nondeterministic comparison ... This adds a flag "deterministic" to collations. If that is false, such a collation disables various optimizations that assume that strings are equal only if they are byte-wise equal. That then allows use cases such as case-insensitive or accent-insensitive comparisons or handling of strings with different Unicode normal forms. This functionality is only supported with the ICU provider. At least glibc doesn't appear to have any locales that work in a nondeterministic way, so it's not worth supporting this for the libc provider. The term "deterministic comparison" in this context is from Unicode Technical Standard #10 (https://unicode.org/reports/tr10/#Deterministic_Comparison). This patch makes changes in three areas: - CREATE COLLATION DDL changes and system catalog changes to support this new flag. - Many executor nodes and auxiliary code are extended to track collations. Previously, this code would just throw away collation information, because the eventually-called user-defined functions didn't use it since they only cared about equality, which didn't need collation information. - String data type functions that do equality comparisons and hashing are changed to take the (non-)deterministic flag into account. For comparison, this just means skipping various shortcuts and tie breakers that use byte-wise comparison. For hashing, we first need to convert the input string to a canonical "sort key" using the ICU analogue of strxfrm(). Reviewed-by: Daniel Verite <daniel@manitou-mail.org> Reviewed-by: Peter Geoghegan <pg@bowt.ie> Discussion: https://www.postgresql.org/message-id/flat/1ccc668f-4cbc-0bef-af67-450b47cdfee7@2ndquadrant.com	7 years ago
Andres Freund	c2fe139c20	tableam: Add and use scan APIs. ... Too allow table accesses to be not directly dependent on heap, several new abstractions are needed. Specifically: 1) Heap scans need to be generalized into table scans. Do this by introducing TableScanDesc, which will be the "base class" for individual AMs. This contains the AM independent fields from HeapScanDesc. The previous heap_{beginscan,rescan,endscan} et al. have been replaced with a table_ version. There's no direct replacement for heap_getnext(), as that returned a HeapTuple, which is undesirable for a other AMs. Instead there's table_scan_getnextslot(). But note that heap_getnext() lives on, it's still used widely to access catalog tables. This is achieved by new scan_begin, scan_end, scan_rescan, scan_getnextslot callbacks. 2) The portion of parallel scans that's shared between backends need to be able to do so without the user doing per-AM work. To achieve that new parallelscan_{estimate, initialize, reinitialize} callbacks are introduced, which operate on a new ParallelTableScanDesc, which again can be subclassed by AMs. As it is likely that several AMs are going to be block oriented, block oriented callbacks that can be shared between such AMs are provided and used by heap. table_block_parallelscan_{estimate, intiialize, reinitialize} as callbacks, and table_block_parallelscan_{nextpage, init} for use in AMs. These operate on a ParallelBlockTableScanDesc. 3) Index scans need to be able to access tables to return a tuple, and there needs to be state across individual accesses to the heap to store state like buffers. That's now handled by introducing a sort-of-scan IndexFetchTable, which again is intended to be subclassed by individual AMs (for heap IndexFetchHeap). The relevant callbacks for an AM are index_fetch_{end, begin, reset} to create the necessary state, and index_fetch_tuple to retrieve an indexed tuple. Note that index_fetch_tuple implementations need to be smarter than just blindly fetching the tuples for AMs that have optimizations similar to heap's HOT - the currently alive tuple in the update chain needs to be fetched if appropriate. Similar to table_scan_getnextslot(), it's undesirable to continue to return HeapTuples. Thus index_fetch_heap (might want to rename that later) now accepts a slot as an argument. Core code doesn't have a lot of call sites performing index scans without going through the systable_* API (in contrast to loads of heap_getnext calls and working directly with HeapTuples). Index scans now store the result of a search in IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the target is not generally a HeapTuple anymore that seems cleaner. To be able to sensible adapt code to use the above, two further callbacks have been introduced: a) slot_callbacks returns a TupleTableSlotOps* suitable for creating slots capable of holding a tuple of the AMs type. table_slot_callbacks() and table_slot_create() are based upon that, but have additional logic to deal with views, foreign tables, etc. While this change could have been done separately, nearly all the call sites that needed to be adapted for the rest of this commit also would have been needed to be adapted for table_slot_callbacks(), making separation not worthwhile. b) tuple_satisfies_snapshot checks whether the tuple in a slot is currently visible according to a snapshot. That's required as a few places now don't have a buffer + HeapTuple around, but a slot (which in heap's case internally has that information). Additionally a few infrastructure changes were needed: I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now internally uses a slot to keep track of tuples. While systable_getnext() still returns HeapTuples, and will so for the foreseeable future, the index API (see 1) above) now only deals with slots. The remainder, and largest part, of this commit is then adjusting all scans in postgres to use the new APIs. Author: Andres Freund, Haribabu Kommi, Alvaro Herrera Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de https://postgr.es/m/20160812231527.GA690404@alvherre.pgsql	7 years ago
Robert Haas	898e5e3290	Allow ATTACH PARTITION with only ShareUpdateExclusiveLock. ... We still require AccessExclusiveLock on the partition itself, because otherwise an insert that violates the newly-imposed partition constraint could be in progress at the same time that we're changing that constraint; only the lock level on the parent relation is weakened. To make this safe, we have to cope with (at least) three separate problems. First, relevant DDL might commit while we're in the process of building a PartitionDesc. If so, find_inheritance_children() might see a new partition while the RELOID system cache still has the old partition bound cached, and even before invalidation messages have been queued. To fix that, if we see that the pg_class tuple seems to be missing or to have a null relpartbound, refetch the value directly from the table. We can't get the wrong value, because DETACH PARTITION still requires AccessExclusiveLock throughout; if we ever want to change that, this will need more thought. In testing, I found it quite difficult to hit even the null-relpartbound case; the race condition is extremely tight, but the theoretical risk is there. Second, successive calls to RelationGetPartitionDesc might not return the same answer. The query planner will get confused if lookup up the PartitionDesc for a particular relation does not return a consistent answer for the entire duration of query planning. Likewise, query execution will get confused if the same relation seems to have a different PartitionDesc at different times. Invent a new PartitionDirectory concept and use it to ensure consistency. This ensures that a single invocation of either the planner or the executor sees the same view of the PartitionDesc from beginning to end, but it does not guarantee that the planner and the executor see the same view. Since this allows pointers to old PartitionDesc entries to survive even after a relcache rebuild, also postpone removing the old PartitionDesc entry until we're certain no one is using it. For the most part, it seems to be OK for the planner and executor to have different views of the PartitionDesc, because the executor will just ignore any concurrently added partitions which were unknown at plan time; those partitions won't be part of the inheritance expansion, but invalidation messages will trigger replanning at some point. Normally, this happens by the time the very next command is executed, but if the next command acquires no locks and executes a prepared query, it can manage not to notice until a new transaction is started. We might want to tighten that up, but it's material for a separate patch. There would still be a small window where a query that started just after an ATTACH PARTITION command committed might fail to notice its results -- but only if the command starts before the commit has been acknowledged to the user. All in all, the warts here around serializability seem small enough to be worth accepting for the considerable advantage of being able to add partitions without a full table lock. Although in general the consequences of new partitions showing up between planning and execution are limited to the query not noticing the new partitions, run-time partition pruning will get confused in that case, so that's the third problem that this patch fixes. Run-time partition pruning assumes that indexes into the PartitionDesc are stable between planning and execution. So, add code so that if new partitions are added between plan time and execution time, the indexes stored in the subplan_map[] and subpart_map[] arrays within the plan's PartitionedRelPruneInfo get adjusted accordingly. There does not seem to be a simple way to generalize this scheme to cope with partitions that are removed, mostly because they could then get added back again with different bounds, but it works OK for added partitions. This code does not try to ensure that every backend participating in a parallel query sees the same view of the PartitionDesc. That currently doesn't matter, because we never pass PartitionDesc indexes between backends. Each backend will ignore the concurrently added partitions which it notices, and it doesn't matter if different backends are ignoring different sets of concurrently added partitions. If in the future that matters, for example because we allow writes in parallel query and want all participants to do tuple routing to the same set of partitions, the PartitionDirectory concept could be improved to share PartitionDescs across backends. There is a draft patch to serialize and restore PartitionDescs on the thread where this patch was discussed, which may be a useful place to start. Patch by me. Thanks to Alvaro Herrera, David Rowley, Simon Riggs, Amit Langote, and Michael Paquier for discussion, and to Alvaro Herrera for some review. Discussion: http://postgr.es/m/CA+Tgmobt2upbSocvvDej3yzokd7AkiT+PvgFH+a9-5VV1oJNSQ@mail.gmail.com Discussion: http://postgr.es/m/CA+TgmoZE0r9-cyA-aY6f8WFEROaDLLL7Vf81kZ8MtFCkxpeQSw@mail.gmail.com Discussion: http://postgr.es/m/CA+TgmoY13KQZF-=HNTrt9UYWYx3_oYOQpu9ioNT49jGgiDpUEA@mail.gmail.com	7 years ago
Andres Freund	277cb78983	Don't reuse slots between root and partition in ON CONFLICT ... UPDATE. ... Until now the the slot to store the conflicting tuple, and the result of the ON CONFLICT SET, where reused between partitions. That necessitated changing slots descriptor when switching partitions. Besides the overhead of switching descriptors on a slot (which requires memory allocations and prevents JITing), that's importantly also problematic for tableam. There individual partitions might belong to different tableams, needing different kinds of slots. In passing also fix ExecOnConflictUpdate to clear the existing slot at exit. Otherwise that slot could continue to hold a pin till the query ends, which could be far too long if the input data set is large, and there's no further conflicts. While previously also problematic, it's now more important as there will be more such slots when partitioned. Author: Andres Freund Reviewed-By: Robert Haas, David Rowley Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de	7 years ago
Andres Freund	70b9bda65f	Use a virtual rather than a heap slot in two places where that suffices. ... Author: Andres Freund Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de	7 years ago
Robert Haas	1bb5e78218	Move code for managing PartitionDescs into a new file, partdesc.c ... This is similar in spirit to the existing partbounds.c file in the same directory, except that there's a lot less code in the new file created by this commit. Pending work in this area proposes to add a bunch more code related to PartitionDescs, though, and this will give us a good place to put it. Discussion: http://postgr.es/m/CA+TgmoZUwPf_uanjF==gTGBMJrn8uCq52XYvAEorNkLrUdoawg@mail.gmail.com	7 years ago
Robert Haas	9eefba181f	Delay lock acquisition for partitions until we route a tuple to them. ... Instead of locking all partitions to which we might route a tuple at executor startup, just lock them as we use them. In some cases such a partition might get locked at executor startup anyway because it appears in the query's range table for some other reason, but in other cases this is a bit savings. This changes the order in which partitions are locked in some cases, which might conceivably create deadlock hazards that don't exist today, but per discussion, it seems like such cases should be rare enough that we can neglect them in favor of improving performance. David Rowley, reviewed and tested by Tomas Vondra, Sho Kato, John Naylor, Tom Lane, and me. Discussion: http://postgr.es/m/CAKJS1f-=FnMqmQP6qitkD+xEddxw22ySLP-0xFk3JAqUX2yfMw@mail.gmail.com	7 years ago
Andres Freund	e0c4ec0728	Replace uses of heap_open et al with the corresponding table_* function. ... Author: Andres Freund Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de	7 years ago
Andres Freund	111944c5ee	Replace heapam.h includes with {table, relation}.h where applicable. ... A lot of files only included heapam.h for relation_open, heap_open etc - replace the heapam.h include in those files with the narrower header. Author: Andres Freund Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de	7 years ago
Andres Freund	4c850ecec6	Don't include heapam.h from others headers. ... heapam.h previously was included in a number of widely used headers (e.g. execnodes.h, indirectly in executor.h, ...). That's problematic on its own, as heapam.h contains a lot of low-level details that don't need to be exposed that widely, but becomes more problematic with the upcoming introduction of pluggable table storage - it seems inappropriate for heapam.h to be included that widely afterwards. heapam.h was largely only included in other headers to get the HeapScanDesc typedef (which was defined in heapam.h, even though HeapScanDescData is defined in relscan.h). The better solution here seems to be to just use the underlying struct (forward declared where necessary). Similar for BulkInsertState. Another problem was that LockTupleMode was used in executor.h - parts of the file tried to cope without heapam.h, but due to the fact that it indirectly included it, several subsequent violations of that goal were not not noticed. We could just reuse the approach of declaring parameters as int, but it seems nicer to move LockTupleMode to lockoptions.h - that's not a perfect location, but also doesn't seem bad. As a number of files relied on implicitly included heapam.h, a significant number of files grew an explicit include. It's quite probably that a few external projects will need to do the same. Author: Andres Freund Reviewed-By: Alvaro Herrera Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de	7 years ago
Bruce Momjian	97c39498e5	Update copyright for 2019 ... Backpatch-through: certain files through 9.4	7 years ago
Michael Paquier	25c026c284	Fix typo in description of ExecFindPartition ... Author: Amit Langote Discussion: https://postgr.es/m/CA+HiwqHg0=UL+Dhh3gpiwYNA=ufk9Lb7GQ2c=5rs=ZmVTP7xAw@mail.gmail.com	7 years ago
Alvaro Herrera	ee07e38c14	Fix PartitionDispatchData vertical whitespace ... Per David Rowley Discussion: https://postgr.es/m/CAKJS1f-MstvBWdkOzACsOHyBgj2oXcBM8kfv+NhVe-Ux-wq9Sg@mail.gmail.com	7 years ago
Andres Freund	578b229718	Remove WITH OIDS support, change oid catalog column visibility. ... Previously tables declared WITH OIDS, including a significant fraction of the catalog tables, stored the oid column not as a normal column, but as part of the tuple header. This special column was not shown by default, which was somewhat odd, as it's often (consider e.g. pg_class.oid) one of the more important parts of a row. Neither pg_dump nor COPY included the contents of the oid column by default. The fact that the oid column was not an ordinary column necessitated a significant amount of special case code to support oid columns. That already was painful for the existing, but upcoming work aiming to make table storage pluggable, would have required expanding and duplicating that "specialness" significantly. WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0). Remove it. Removing includes: - CREATE TABLE and ALTER TABLE syntax for declaring the table to be WITH OIDS has been removed (WITH (oids[ = true]) will error out) - pg_dump does not support dumping tables declared WITH OIDS and will issue a warning when dumping one (and ignore the oid column). - restoring an pg_dump archive with pg_restore will warn when restoring a table with oid contents (and ignore the oid column) - COPY will refuse to load binary dump that includes oids. - pg_upgrade will error out when encountering tables declared WITH OIDS, they have to be altered to remove the oid column first. - Functionality to access the oid of the last inserted row (like plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed. The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false) for CREATE TABLE) is still supported. While that requires a bit of support code, it seems unnecessary to break applications / dumps that do not use oids, and are explicit about not using them. The biggest user of WITH OID columns was postgres' catalog. This commit changes all 'magic' oid columns to be columns that are normally declared and stored. To reduce unnecessary query breakage all the newly added columns are still named 'oid', even if a table's column naming scheme would indicate 'reloid' or such. This obviously requires adapting a lot code, mostly replacing oid access via HeapTupleGetOid() with access to the underlying Form_pg_*->oid column. The bootstrap process now assigns oids for all oid columns in genbki.pl that do not have an explicit value (starting at the largest oid previously used), only oids assigned later by oids will be above FirstBootstrapObjectId. As the oid column now is a normal column the special bootstrap syntax for oids has been removed. Oids are not automatically assigned during insertion anymore, all backend code explicitly assigns oids with GetNewOidWithIndex(). For the rare case that insertions into the catalog via SQL are called for the new pg_nextoid() function can be used (which only works on catalog tables). The fact that oid columns on system tables are now normal columns means that they will be included in the set of columns expanded by * (i.e. SELECT * FROM pg_class will now include the table's oid, previously it did not). It'd not technically be hard to hide oid column by default, but that'd mean confusing behavior would either have to be carried forward forever, or it'd cause breakage down the line. While it's not unlikely that further adjustments are needed, the scope/invasiveness of the patch makes it worthwhile to get merge this now. It's painful to maintain externally, too complicated to commit after the code code freeze, and a dependency of a number of other patches. Catversion bump, for obvious reasons. Author: Andres Freund, with contributions by John Naylor Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de	7 years ago
Alvaro Herrera	0201d79a55	Avoid re-typedef'ing PartitionTupleRouting ... Apparently, gcc on macOS (?) doesn't like it. Per buildfarm.	7 years ago
Alvaro Herrera	3f2393edef	Redesign initialization of partition routing structures ... This speeds up write operations (INSERT, UPDATE, DELETE, COPY, as well as the future MERGE) on partitioned tables. This changes the setup for tuple routing so that it does far less work during the initial setup and pushes more work out to when partitions receive tuples. PartitionDispatchData structs for sub-partitioned tables are only created when a tuple gets routed through it. The possibly large arrays in the PartitionTupleRouting struct have largely been removed. The partitions[] array remains but now never contains any NULL gaps. Previously the NULLs had to be skipped during ExecCleanupTupleRouting(), which could add a large overhead to the cleanup when the number of partitions was large. The partitions[] array is allocated small to start with and only enlarged when we route tuples to enough partitions that it runs out of space. This allows us to keep simple single-row partition INSERTs running quickly. Redesign The arrays in PartitionTupleRouting which stored the tuple translation maps have now been removed. These have been moved out into a PartitionRoutingInfo struct which is an additional field in ResultRelInfo. The find_all_inheritors() call still remains by far the slowest part of ExecSetupPartitionTupleRouting(). This commit just removes the other slow parts. In passing also rename the tuple translation maps from being ParentToChild and ChildToParent to being RootToPartition and PartitionToRoot. The old names mislead you into thinking that a partition of some sub-partitioned table would translate to the rowtype of the sub-partitioned table rather than the root partitioned table. Authors: David Rowley and Amit Langote, heavily revised by Álvaro Herrera Testing help from Jesper Pedersen and Kato Sho. Discussion: https://postgr.es/m/CAKJS1f_1RJyFquuCKRFHTdcXqoPX-PYqAd7nz=GVBwvGh4a6xA@mail.gmail.com	7 years ago
Andres Freund	1a0586de36	Introduce notion of different types of slots (without implementing them). ... Upcoming work intends to allow pluggable ways to introduce new ways of storing table data. Accessing those table access methods from the executor requires TupleTableSlots to be carry tuples in the native format of such storage methods; otherwise there'll be a significant conversion overhead. Different access methods will require different data to store tuples efficiently (just like virtual, minimal, heap already require fields in TupleTableSlot). To allow that without requiring additional pointer indirections, we want to have different structs (embedding TupleTableSlot) for different types of slots. Thus different types of slots are needed, which requires adapting creators of slots. The slot that most efficiently can represent a type of tuple in an executor node will often depend on the type of slot a child node uses. Therefore we need to track the type of slot is returned by nodes, so parent slots can create slots based on that. Relatedly, JIT compilation of tuple deforming needs to know which type of slot a certain expression refers to, so it can create an appropriate deforming function for the type of tuple in the slot. But not all nodes will only return one type of slot, e.g. an append node will potentially return different types of slots for each of its subplans. Therefore add function that allows to query the type of a node's result slot, and whether it'll always be the same type (whether it's fixed). This can be queried using ExecGetResultSlotOps(). The scan, result, inner, outer type of slots are automatically inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(), left/right subtrees respectively. If that's not correct for a node, that can be overwritten using new fields in PlanState. This commit does not introduce the actually abstracted implementation of different kind of TupleTableSlots, that will be left for a followup commit. The different types of slots introduced will, for now, still use the same backing implementation. While this already partially invalidates the big comment in tuptable.h, it seems to make more sense to update it later, when the different TupleTableSlot implementations actually exist. Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de	7 years ago
Tom Lane	34c9e455d0	Improve performance of partition pruning remapping a little. ... ExecFindInitialMatchingSubPlans has to update the PartitionPruneState's subplan mapping data to account for the removal of subplans it prunes. However, that's only necessary if run-time pruning will also occur, so we can skip it when that won't happen, which should result in not needing to do the remapping in many cases. (We now need it only when some partitions are potentially startup-time prunable and others are potentially run-time prunable, which seems like an unusual case.) Also make some marginal performance improvements in the remapping itself. These will mainly win if most partitions got pruned by the startup-time pruning, which is perhaps a debatable assumption in this context. Also fix some bogus comments, and rearrange code to marginally reduce space consumption in the executor's query-lifespan context. David Rowley, reviewed by Yoshikazu Imai Discussion: https://postgr.es/m/CAKJS1f9+m6-di-zyy4B4AGn0y1B9F8UKDRigtBbNviXOkuyOpw@mail.gmail.com	7 years ago
Magnus Hagander	fbec7459aa	Fix spelling errors and typos in comments ... Author: Daniel Gustafsson <daniel@yesql.se>	7 years ago
Tom Lane	52ed730d51	Remove some unnecessary fields from Plan trees. ... In the wake of commit f2343653f, we no longer need some fields that were used before to control executor lock acquisitions: * PlannedStmt.nonleafResultRelations can go away entirely. * partitioned_rels can go away from Append, MergeAppend, and ModifyTable. However, ModifyTable still needs to know the RT index of the partition root table if any, which was formerly kept in the first entry of that list. Add a new field "rootRelation" to remember that. rootRelation is partly redundant with nominalRelation, in that if it's set it will have the same value as nominalRelation. However, the latter field has a different purpose so it seems best to keep them distinct. Amit Langote, reviewed by David Rowley and Jesper Pedersen, and whacked around a bit more by me Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp	7 years ago
Tom Lane	9ddef36278	Centralize executor's opening/closing of Relations for rangetable entries. ... Create an array estate->es_relations[] paralleling the es_range_table, and store references to Relations (relcache entries) there, so that any given RT entry is opened and closed just once per executor run. Scan nodes typically still call ExecOpenScanRelation, but ExecCloseScanRelation is no more; relation closing is now done centrally in ExecEndPlan. This is slightly more complex than one would expect because of the interactions with relcache references held in ResultRelInfo nodes. The general convention is now that ResultRelInfo->ri_RelationDesc does not represent a separate relcache reference and so does not need to be explicitly closed; but there is an exception for ResultRelInfos in the es_trig_target_relations list, which are manufactured by ExecGetTriggerResultRel and have to be cleaned up by ExecCleanUpTriggerState. (That much was true all along, but these ResultRelInfos are now more different from others than they used to be.) To allow the partition pruning logic to make use of es_relations[] rather than having its own relcache references, adjust PartitionedRelPruneInfo to store an RT index rather than a relation OID. Amit Langote, reviewed by David Rowley and Jesper Pedersen, some mods by me Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp	7 years ago
Andres Freund	cc2905e963	Use slots more widely in tuple mapping code and make naming more consistent. ... It's inefficient to use a single slot for mapping between tuple descriptors for multiple tuples, as previously done when using ConvertPartitionTupleSlot(), as that means the slot's tuple descriptors change for every tuple. Previously we also, via ConvertPartitionTupleSlot(), built new tuples after the mapping even in cases where we, immediately afterwards, access individual columns again. Refactor the code so one slot, on demand, is used for each partition. That avoids having to change the descriptor (and allows to use the more efficient "fixed" tuple slots). Then use slot->slot mapping, to avoid unnecessarily forming a tuple. As the naming between the tuple and slot mapping functions wasn't consistent, rename them to execute_attr_map_{tuple,slot}. It's likely that we'll also rename convert_tuples_by_* to denote that these functions "only" build a map, but that's left for later. Author: Amit Khandekar and Amit Langote, editorialized by me Reviewed-By: Amit Langote, Amit Khandekar, Andres Freund Discussion: https://postgr.es/m/CAJ3gD9fR0wRNeAE8VqffNTyONS_UfFPRpqxhnD9Q42vZB+Jvpg@mail.gmail.com https://postgr.es/m/e4f9d743-cd4b-efb0-7574-da21d86a7f36%40lab.ntt.co.jp Backpatch: -	7 years ago
Andres Freund	29c94e03c7	Split ExecStoreTuple into ExecStoreHeapTuple and ExecStoreBufferHeapTuple. ... Upcoming changes introduce further types of tuple table slots, in preparation of making table storage pluggable. New storage methods will have different representation of tuples, therefore the slot accessor should refer explicitly to heap tuples. Instead of just renaming the functions, split it into one function that accepts heap tuples not residing in buffers, and one accepting ones in buffers. Previously one function was used for both, but that was a bit awkward already, and splitting will allow us to represent slot types for tuples in buffers and normal memory separately. This is split out from the patch introducing abstract slots, as this largely consists out of mechanical changes. Author: Ashutosh Bapat Reviewed-By: Andres Freund Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de	7 years ago
Alvaro Herrera	6b78231d91	Move PartitionDispatchData struct definition to execPartition.c ... There's no reason to expose the struct definition, so don't. Author: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp> Discussion: https://postgr.es/m/d3fa24c1-bc65-7133-81df-6474387ccc4f@lab.ntt.co.jp	7 years ago