171 Commits (0791930aaaed2678daf694fa8b06cf81cd72cd69)

Author	SHA1	Message	Date
Andres Freund	26669757b6	Handle logical slot conflicts on standby ... During WAL replay on the standby, when a conflict with a logical slot is identified, invalidate such slots. There are two sources of conflicts: 1) Using the information added in 6af1793954, logical slots are invalidated if required rows are removed 2) wal_level on the primary server is reduced to below logical Uses the infrastructure introduced in the prior commit. FIXME: add commit reference. Change InvalidatePossiblyObsoleteSlot() to use a recovery conflict to interrupt use of a slot, if called in the startup process. The new recovery conflict is added to pg_stat_database_conflicts, as confl_active_logicalslot. See 6af1793954 for an overall design of logical decoding on a standby. Bumps catversion for the addition of the pg_stat_database_conflicts column. Bumps PGSTAT_FILE_FORMAT_ID for the same reason. Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com> Author: Andres Freund <andres@anarazel.de> Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version) Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com> Reviewed-by: Andres Freund <andres@anarazel.de> Reviewed-by: Robert Haas <robertmhaas@gmail.com> Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com> Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com> Reviewed-by: Amit Kapila <amit.kapila16@gmail.com> Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org> Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de	3 years ago
Thomas Munro	faeedbcefd	Introduce PG_IO_ALIGN_SIZE and align all I/O buffers. ... In order to have the option to use O_DIRECT/FILE_FLAG_NO_BUFFERING in a later commit, we need the addresses of user space buffers to be well aligned. The exact requirements vary by OS and file system (typically sectors and/or memory pages). The address alignment size is set to 4096, which is enough for currently known systems: it matches modern sectors and common memory page size. There is no standard governing O_DIRECT's requirements so we might eventually have to reconsider this with more information from the field or future systems. Aligning I/O buffers on memory pages is also known to improve regular buffered I/O performance. Three classes of I/O buffers for regular data pages are adjusted: (1) Heap buffers are now allocated with the new palloc_aligned() or MemoryContextAllocAligned() functions introduced by commit 439f6175. (2) Stack buffers now use a new struct PGIOAlignedBlock to respect PG_IO_ALIGN_SIZE, if possible with this compiler. (3) The buffer pool is also aligned in shared memory. WAL buffers were already aligned on XLOG_BLCKSZ. It's possible for XLOG_BLCKSZ to be configured smaller than PG_IO_ALIGNED_SIZE and thus for O_DIRECT WAL writes to fail to be well aligned, but that's a pre-existing condition and will be addressed by a later commit. BufFiles are not yet addressed (there's no current plan to use O_DIRECT for those, but they could potentially get some incidental speedup even in plain buffered I/O operations through better alignment). If we can't align stack objects suitably using the compiler extensions we know about, we disable the use of O_DIRECT by setting PG_O_DIRECT to 0. This avoids the need to consider systems that have O_DIRECT but can't align stack objects the way we want; such systems could in theory be supported with more work but we don't currently know of any such machines, so it's easier to pretend there is no O_DIRECT support instead. That's an existing and tested class of system. Add assertions that all buffers passed into smgrread(), smgrwrite() and smgrextend() are correctly aligned, unless PG_O_DIRECT is 0 (= stack alignment tricks may be unavailable) or the block size has been set too small to allow arrays of buffers to be all aligned. Author: Thomas Munro <thomas.munro@gmail.com> Author: Andres Freund <andres@anarazel.de> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/CA+hUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg@mail.gmail.com	3 years ago
Andres Freund	acab1b0914	Convert many uses of ReadBuffer[Extended](P_NEW) to ExtendBufferedRel() ... A few places are not converted. Some because they are tackled in later commits (e.g. hio.c, xlogutils.c), some because they are more complicated (e.g. brin_pageops.c). Having a few users of ReadBuffer(P_NEW) is good anyway, to ensure the backward compat path stays working. Discussion: https://postgr.es/m/20221029025420.eplyow6k7tgu6he3@awork3.anarazel.de	3 years ago
Peter Geoghegan	05a304a855	Make SP-GiST redirect cleanup more aggressive. ... Commit 61b313e4 made VACUUM pass down a heaprel to index AM bulkdelete and vacuumcleanup routines. Although this was primarily intended as preparation for logical decoding on standbys, it also made it easy to correct an old deficiency in how we determine how to cleanup SP-GiST redirect and placeholder tuples. Pass the heaprel to GlobalVisTestFor() during cleanup of redirect and placeholder tuples, rather than pessimistically passing NULL. Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com> Discussion: https://postgr.es/m/02392033-f030-a3c8-c7d0-5c27eb529fec@gmail.com	3 years ago
Andres Freund	6af1793954	Add info in WAL records in preparation for logical slot conflict handling ... This commit only implements one prerequisite part for allowing logical decoding. The commit message contains an explanation of the overall design, which later commits will refer back to. Overall design: 1. We want to enable logical decoding on standbys, but replay of WAL from the primary might remove data that is needed by logical decoding, causing error(s) on the standby. To prevent those errors, a new replication conflict scenario needs to be addressed (as much as hot standby does). 2. Our chosen strategy for dealing with this type of replication slot is to invalidate logical slots for which needed data has been removed. 3. To do this we need the latestRemovedXid for each change, just as we do for physical replication conflicts, but we also need to know whether any particular change was to data that logical replication might access. That way, during WAL replay, we know when there is a risk of conflict and, if so, if there is a conflict. 4. We can't rely on the standby's relcache entries for this purpose in any way, because the startup process can't access catalog contents. 5. Therefore every WAL record that potentially removes data from the index or heap must carry a flag indicating whether or not it is one that might be accessed during logical decoding. Why do we need this for logical decoding on standby? First, let's forget about logical decoding on standby and recall that on a primary database, any catalog rows that may be needed by a logical decoding replication slot are not removed. This is done thanks to the catalog_xmin associated with the logical replication slot. But, with logical decoding on standby, in the following cases: - hot_standby_feedback is off - hot_standby_feedback is on but there is no a physical slot between the primary and the standby. Then, hot_standby_feedback will work, but only while the connection is alive (for example a node restart would break it) Then, the primary may delete system catalog rows that could be needed by the logical decoding on the standby (as it does not know about the catalog_xmin on the standby). So, it’s mandatory to identify those rows and invalidate the slots that may need them if any. Identifying those rows is the purpose of this commit. Implementation: When a WAL replay on standby indicates that a catalog table tuple is to be deleted by an xid that is greater than a logical slot's catalog_xmin, then that means the slot's catalog_xmin conflicts with the xid, and we need to handle the conflict. While subsequent commits will do the actual conflict handling, this commit adds a new field isCatalogRel in such WAL records (and a new bit set in the xl_heap_visible flags field), that is true for catalog tables, so as to arrange for conflict handling. The affected WAL records are the ones that already contain the snapshotConflictHorizon field, namely: - gistxlogDelete - gistxlogPageReuse - xl_hash_vacuum_one_page - xl_heap_prune - xl_heap_freeze_page - xl_heap_visible - xl_btree_reuse_page - xl_btree_delete - spgxlogVacuumRedirect Due to this new field being added, xl_hash_vacuum_one_page and gistxlogDelete do now contain the offsets to be deleted as a FLEXIBLE_ARRAY_MEMBER. This is needed to ensure correct alignment. It's not needed on the others struct where isCatalogRel has been added. This commit just introduces the WAL format changes mentioned above. Handling the actual conflicts will follow in future commits. Bumps XLOG_PAGE_MAGIC as the several WAL records are changed. Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com> Author: Andres Freund <andres@anarazel.de> (in an older version) Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version) Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com> Reviewed-by: Andres Freund <andres@anarazel.de> Reviewed-by: Robert Haas <robertmhaas@gmail.com> Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com> Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>	3 years ago
Andres Freund	61b313e47e	Pass down table relation into more index relation functions ... This is done in preparation for logical decoding on standby, which needs to include whether visibility affecting WAL records are about a (user) catalog table. Which is only known for the table, not the indexes. It's also nice to be able to pass the heap relation to GlobalVisTestFor() in vacuumRedirectAndPlaceholder(). Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com> Discussion: https://postgr.es/m/21b700c3-eecf-2e05-a699-f8c78dd31ec7@gmail.com	3 years ago
Tomas Vondra	19d8e2308b	Ignore BRIN indexes when checking for HOT updates ... When determining whether an index update may be skipped by using HOT, we can ignore attributes indexed by block summarizing indexes without references to individual tuples that need to be cleaned up. A new type TU_UpdateIndexes provides a signal to the executor to determine which indexes to update - no indexes, all indexes, or only the summarizing indexes. This also removes rd_indexattr list, and replaces it with rd_attrsvalid flag. The list was not used anywhere, and a simple flag is sufficient. This was originally committed as 5753d4ee32, but then got reverted by e3fcca0d0d because of correctness issues. Original patch by Josef Simanek, various fixes and improvements by Tomas Vondra and me. Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra Reviewed-by: Tomas Vondra, Alvaro Herrera Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com	3 years ago
Peter Eisentraut	b9f0e54bc9	Update types in smgr API ... Change data buffer to void *, from char *, and add const where appropriate. This makes it match the File API (see also 2d4f1ba6cf) and stdio. Discussion: https://www.postgresql.org/message-id/flat/11dda853-bb5b-59ba-a746-e168b1ce4bdb%40enterprisedb.com	3 years ago
Peter Eisentraut	d952373a98	New header varatt.h split off from postgres.h ... This new header contains all the variable-length data types support (TOAST support) from postgres.h, which isn't needed by large parts of the backend code. Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Discussion: https://www.postgresql.org/message-id/flat/ddcce239-0f29-6e62-4b47-1f8ca742addf%40enterprisedb.com	3 years ago
Michael Paquier	33ab0a2a52	Fix typos in comments, code and documentation ... While on it, newlines are removed from the end of two elog() strings. The others are simple grammar mistakes. One comment in pg_upgrade referred incorrectly to sequences since a7e5457. Author: Justin Pryzby Discussion: https://postgr.es/m/20221230231257.GI1153@telsasoft.com Backpatch-through: 11	3 years ago
Bruce Momjian	c8e1ba736b	Update copyright for 2023 ... Backpatch-through: 11	3 years ago
Andrew Dunstan	8284cf5f74	Add copyright notices to meson files ... Discussion: https://postgr.es/m/222b43a5-2fb3-2c1b-9cd0-375d376c8246@dunslane.net	3 years ago
Peter Geoghegan	1489b1ce72	Standardize rmgrdesc recovery conflict XID output. ... Standardize on the name snapshotConflictHorizon for all XID fields from WAL records that generate recovery conflicts when in hot standby mode. This supersedes the previous latestRemovedXid naming convention. The new naming convention places emphasis on how the values are actually used by REDO routines. How the values are generated during original execution (details of which vary by record type) is deemphasized. Users of tools like pg_waldump can now grep for snapshotConflictHorizon to see all potential sources of recovery conflicts in a standardized way, without necessarily having to consider which specific record types might be involved. Also bring a couple of WAL record types that didn't follow any kind of naming convention into line. These are heapam's VISIBLE record type and SP-GiST's VACUUM_REDIRECT record type. Now every WAL record whose REDO routine calls ResolveRecoveryConflictWithSnapshot() passes through the snapshotConflictHorizon field from its WAL record. This is follow-up work to the refactoring from commit 9e540599 that made FREEZE_PAGE WAL records use a standard snapshotConflictHorizon style XID cutoff. No bump in XLOG_PAGE_MAGIC, since the underlying format of affected WAL records doesn't change. Author: Peter Geoghegan <pg@bowt.ie> Reviewed-By: Andres Freund <andres@anarazel.de> Discussion: https://postgr.es/m/CAH2-Wzm2CQUmViUq7Opgk=McVREHSOorYaAjR1ZpLYkRN7_dPw@mail.gmail.com	3 years ago
Andres Freund	e6927270cd	meson: Add initial version of meson based build system ... Autoconf is showing its age, fewer and fewer contributors know how to wrangle it. Recursive make has a lot of hard to resolve dependency issues and slow incremental rebuilds. Our home-grown MSVC build system is hard to maintain for developers not using Windows and runs tests serially. While these and other issues could individually be addressed with incremental improvements, together they seem best addressed by moving to a more modern build system. After evaluating different build system choices, we chose to use meson, to a good degree based on the adoption by other open source projects. We decided that it's more realistic to commit a relatively early version of the new build system and mature it in tree. This commit adds an initial version of a meson based build system. It supports building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD, Solaris and Windows (however only gcc is supported on aix, solaris). For Windows/MSVC postgres can now be built with ninja (faster, particularly for incremental builds) and msbuild (supporting the visual studio GUI, but building slower). Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM bitcode generation, documentation adjustments) are done in subsequent commits requiring further review. Other aspects (e.g. not installing test-only extensions) are not yet addressed. When building on Windows with msbuild, builds are slower when using a visual studio version older than 2019, because those versions do not support MultiToolTask, required by meson for intra-target parallelism. The plan is to remove the MSVC specific build system in src/tools/msvc soon after reaching feature parity. However, we're not planning to remove the autoconf/make build system in the near future. Likely we're going to keep at least the parts required for PGXS to keep working around until all supported versions build with meson. Some initial help for postgres developers is at https://wiki.postgresql.org/wiki/Meson With contributions from Thomas Munro, John Naylor, Stone Tickle and others. Author: Andres Freund <andres@anarazel.de> Author: Nazir Bilal Yavuz <byavuz81@gmail.com> Author: Peter Eisentraut <peter@eisentraut.org> Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com> Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de	3 years ago
David Rowley	f959bf9a5b	Further -Wshadow=compatible-local warning fixes ... These should have been included in 421892a19 as these shadowed variable warnings can also be fixed by adjusting the scope of the shadowed variable to put the declaration for it in an inner scope. This is part of the same effort as f01592f91. By my count, this takes the warning count from 114 down to 106. Author: David Rowley and Justin Pryzby Discussion: https://postgr.es/m/CAApHDvrwLGBP%2BYw9vriayyf%3DXR4uPWP5jr6cQhP9au_kaDUhbA%40mail.gmail.com	3 years ago
Robert Haas	b0a55e4329	Change internal RelFileNode references to RelFileNumber or RelFileLocator. ... We have been using the term RelFileNode to refer to either (1) the integer that is used to name the sequence of files for a certain relation within the directory set aside for that tablespace/database combination; or (2) that value plus the OIDs of the tablespace and database; or occasionally (3) the whole series of files created for a relation based on those values. Using the same name for more than one thing is confusing. Replace RelFileNode with RelFileNumber when we're talking about just the single number, i.e. (1) from above, and with RelFileLocator when we're talking about all the things that are needed to locate a relation's files on disk, i.e. (2) from above. In the places where we refer to (3) as a relfilenode, instead refer to "relation storage". Since there is a ton of SQL code in the world that knows about pg_class.relfilenode, don't change the name of that column, or of other SQL-facing things that derive their name from it. On the other hand, do adjust closely-related internal terminology. For example, the structure member names dbNode and spcNode appear to be derived from the fact that the structure itself was called RelFileNode, so change those to dbOid and spcOid. Likewise, various variables with names like rnode and relnode get renamed appropriately, according to how they're being used in context. Hopefully, this is clearer than before. It is also preparation for future patches that intend to widen the relfilenumber fields from its current width of 32 bits. Variables that store a relfilenumber are now declared as type RelFileNumber rather than type Oid; right now, these are the same, but that can now more easily be changed. Dilip Kumar, per an idea from me. Reviewed also by Andres Freund. I fixed some whitespace issues, changed a couple of words in a comment, and made one other minor correction. Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com	4 years ago
Tomas Vondra	e3fcca0d0d	Revert changes in HOT handling of BRIN indexes ... This reverts commits 5753d4ee32 and fe60b67250 that modified HOT to ignore BRIN indexes. The commit message for 5753d4ee32 claims that: When determining whether an index update may be skipped by using HOT, we can ignore attributes indexed only by BRIN indexes. There are no index pointers to individual tuples in BRIN, and the page range summary will be updated anyway as it relies on visibility info. This is partially incorrect - it's true BRIN indexes don't point to individual tuples, so HOT chains are not an issue, but the visibitlity info is not sufficient to keep the index up to date. This can easily result in corrupted indexes, as demonstrated in the hackers thread. This does not mean relaxing the HOT restrictions for BRIN is a lost cause, but it needs to handle the two aspects (allowing HOT chains and updating the page range summaries) as separate. But that requires a major changes, and it's too late for that in the current dev cycle. Reported-by: Tomas Vondra Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com	4 years ago
Alvaro Herrera	24d2b2680a	Remove extraneous blank lines before block-closing braces ... These are useless and distracting. We wouldn't have written the code with them to begin with, so there's no reason to keep them. Author: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com Discussion: https://postgr.es/m/attachment/133167/0016-Extraneous-blank-lines.patch	4 years ago
Bruce Momjian	27b77ecf9f	Update copyright for 2022 ... Backpatch-through: 10	4 years ago
Tomas Vondra	5753d4ee32	Ignore BRIN indexes when checking for HOT udpates ... When determining whether an index update may be skipped by using HOT, we can ignore attributes indexed only by BRIN indexes. There are no index pointers to individual tuples in BRIN, and the page range summary will be updated anyway as it relies on visibility info. This also removes rd_indexattr list, and replaces it with rd_attrsvalid flag. The list was not used anywhere, and a simple flag is sufficient. Patch by Josef Simanek, various fixes and improvements by me. Author: Josef Simanek Reviewed-by: Tomas Vondra, Alvaro Herrera Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com	4 years ago
Tom Lane	3804539e48	Replace random(), pg_erand48(), etc with a better PRNG API and algorithm. ... Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating a bunch of platform dependencies as well as fundamentally-obsolete PRNG code. In addition, this API replacement will ease replacing the algorithm again in future, should that become necessary. xoroshiro128** is a few percent slower than the drand48 family, but it can produce full-width 64-bit random values not only 48-bit, and it should be much more trustworthy. It's likely to be noticeably faster than the platform's random(), depending on which platform you are thinking about; and we can have non-global state vectors easily, unlike with random(). It is not cryptographically strong, but neither are the functions it replaces. Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo	4 years ago
Tom Lane	f4e7ae2b8a	Fix SP-GiST scan initialization logic for binary-compatible cases. ... Commit ac9099fc1 rearranged the logic in spgGetCache() that determines the index's attType (nominal input data type) and leafType (actual type stored in leaf index tuples). Turns out this broke things for the case where (a) the actual input data type is different from the nominal type, (b) the opclass's config function leaves leafType defaulted, and (c) the opclass has no "compress" function. (b) caused us to assign the actual input data type as leafType, and then since that's not attType, we complained that a "compress" function is required. For non-polymorphic opclasses, condition (a) arises in binary-compatible cases, such as using SP-GiST text_ops for a varchar column, or using any opclass on a domain over its nominal input type. To fix, use attType for leafType when the index's declared column type is different from but binary-compatible with attType. Do this only in the defaulted-leafType case, to avoid overriding any explicit selection made by the opclass. Per bug #17294 from Ilya Anfimov. Back-patch to v14. Discussion: https://postgr.es/m/17294-8f6c7962ce877edc@postgresql.org	4 years ago
Tom Lane	3778bcb39a	Count SP-GiST index scans in pg_stat statistics. ... Somehow, spgist overlooked the need to call pgstat_count_index_scan(). Hence, pg_stat_all_indexes.idx_scan and equivalent columns never became nonzero for an SP-GiST index, although the related per-tuple counters worked fine. This fix works a bit differently from other index AMs, in that the counter increment occurs in spgrescan not spggettuple/spggetbitmap. It looks like this won't make the user-visible semantics noticeably different, so I won't go to the trouble of introducing an is-this- the-first-call flag just to make the counter bumps happen in the same places. Per bug #17163 from Christian Quest. Back-patch to all supported versions. Discussion: https://postgr.es/m/17163-b8c5cc88322a5e92@postgresql.org	4 years ago
Peter Eisentraut	ae03a7c739	Remove some unnecessary casts in format arguments ... We can use %zd or %zu directly, no need to cast to int. Conversely, some code was casting away from int when it could be using %d directly.	4 years ago
Tom Lane	f10f0ae420	Replace RelationOpenSmgr() with RelationGetSmgr(). ... The idea behind this patch is to design out bugs like the one fixed by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel), it was considered okay to access rel->rd_smgr directly for some not-very-clear interval. But since that pointer will be cleared by relcache flushes, we had bugs arising from overreliance on a previous RelationOpenSmgr call still being effective. Now, very little code except that in rel.h and relcache.c should ever touch the rd_smgr field directly. The normal coding rule is to use RelationGetSmgr(rel) and not expect the result to be valid for longer than one smgr function call. There are a couple of places where using the function every single time seemed like overkill, but they are now annotated with large warning comments. Amul Sul, after an idea of mine. Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com	5 years ago
Tom Lane	f5024d8d7b	Re-order pg_attribute columns to eliminate some padding space. ... Now that attcompression is just a char, there's a lot of wasted padding space after it. Move it into the group of char-wide columns to save a net of 4 bytes per pg_attribute entry. While we're at it, swap the order of attstorage and attalign to make for a more logical grouping of these columns. Also re-order actions in related code to match the new field ordering. This patch also fixes one outright bug: equalTupleDescs() failed to compare attcompression. That could, for example, cause relcache reload to fail to adopt a new value following a change. Michael Paquier and Tom Lane, per a gripe from Andres Freund. Discussion: https://postgr.es/m/20210517204803.iyk5wwvwgtjcmc5w@alap3.anarazel.de	5 years ago
Tom Lane	c3c35a733c	Prevent infinite insertion loops in spgdoinsert(). ... Formerly we just relied on operator classes that assert longValuesOK to eventually shorten the leaf value enough to fit on an index page. That fails since the introduction of INCLUDE-column support (commit 09c1c6ab4), because the INCLUDE columns might alone take up more than a page, meaning no amount of leaf-datum compaction will get the job done. At least with spgtextproc.c, that leads to an infinite loop, since spgtextproc.c won't throw an error for not being able to shorten the leaf datum anymore. To fix without breaking cases that would otherwise work, add logic to spgdoinsert() to verify that the leaf tuple size is decreasing after each "choose" step. Some opclasses might not decrease the size on every single cycle, and in any case, alignment roundoff of the tuple size could obscure small gains. Therefore, allow up to 10 cycles without additional savings before throwing an error. (Perhaps this number will need adjustment, but it seems quite generous right now.) As long as we've developed this logic, let's back-patch it. The back branches don't have INCLUDE columns to worry about, but this seems like a good defense against possible bugs in operator classes. We already know that an infinite loop here is pretty unpleasant, so having a defense seems to outweigh the risk of breaking things. (Note that spgtextproc.c is actually the only known opclass with longValuesOK support, so that this is all moot for known non-core opclasses anyway.) Per report from Dilip Kumar. Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com	5 years ago
Tom Lane	eb7a6b9229	Fix query-cancel handling in spgdoinsert(). ... Knowing that a buggy opclass could cause an infinite insertion loop, spgdoinsert() intended to allow its loop to be interrupted by query cancel. However, that never actually worked, because in iterations after the first, we'd be holding buffer lock(s) which would cause InterruptHoldoffCount to be positive, preventing servicing of the interrupt. To fix, check if an interrupt is pending, and if so fall out of the insertion loop and service the interrupt after we've released the buffers. If it was indeed a query cancel, that's the end of the matter. If it was a non-canceling interrupt reason, make use of the existing provision to retry the whole insertion. (This isn't as wasteful as it might seem, since any upper-level index tuples we already created should be usable in the next attempt.) While there's no known instance of such a bug in existing release branches, it still seems like a good idea to back-patch this to all supported branches, since the behavior is fairly nasty if a loop does happen --- not only is it uncancelable, but it will quickly consume memory to the point of an OOM failure. In any case, this code is certainly not working as intended. Per report from Dilip Kumar. Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com	5 years ago
Michael Paquier	4c0239cb7a	Remove redundant memset(0) calls for page init of some index AMs ... Bloom, GIN, GiST and SP-GiST rely on PageInit() to initialize the contents of a page, and this routine fills entirely a page with zeros for a size of BLCKSZ, including the special space. Those index AMs have been using an extra memset() call to fill with zeros the special page space, or even the whole page, which is not necessary as PageInit() already does this work, so let's remove them. GiST was not doing this extra call, but has commented out a system call that did so since 6236991. While on it, remove one MAXALIGN() for SP-GiST as PageInit() takes care of that. This makes the whole page initialization logic more consistent across all index AMs. Author: Bharath Rupireddy Reviewed-by: Vignesh C, Mahendra Singh Thalor Discussion: https://postgr.es/m/CALj2ACViOo2qyaPT7krWm4LRyRTw9kOXt+g6PfNmYuGA=YHj9A@mail.gmail.com	5 years ago
Tom Lane	09c1c6ab4b	Support INCLUDE'd columns in SP-GiST. ... Not much to say here: does what it says on the tin. We steal a previously-always-zero bit from the nextOffset field of leaf index tuples in order to track whether there is a nulls bitmap. Otherwise it works about like included columns in other index types. Pavel Borisov, reviewed by Andrey Borodin and Anastasia Lubennikova, and rather heavily editorialized on by me Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com	5 years ago
Tom Lane	dfc843d465	Fix more confusion in SP-GiST. ... spg_box_quad_leaf_consistent unconditionally returned the leaf datum as leafValue, even though in its usage for poly_ops that value is of completely the wrong type. In versions before 12, that was harmless because the core code did nothing with leafValue in non-index-only scans ... but since commit 2a6368343, if we were doing a KNN-style scan, spgNewHeapItem would unconditionally try to copy the value using the wrong datatype parameters. Said copying is a waste of time and space if we're not going to return the data, but it accidentally failed to fail until I fixed the datatype confusion in ac9099fc1. Hence, change spgNewHeapItem to not copy the datum unless we're actually going to return it later. This saves cycles and dodges the question of whether lossy opclasses are returning the right type. Also change spg_box_quad_leaf_consistent to not return data that might be of the wrong type, as insurance against somebody introducing a similar bug into the core code in future. It seems like a good idea to back-patch these two changes into v12 and v13, although I'm afraid to change spgNewHeapItem's mistaken idea of which datatype to use in those branches. Per buildfarm results from ac9099fc1. Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us	5 years ago
Tom Lane	ac9099fc1d	Fix confusion in SP-GiST between attribute type and leaf storage type. ... According to the documentation, the attType passed to the opclass config function (and also relied on by the core code) is the type of the heap column or expression being indexed. But what was actually being passed was the type stored for the index column. This made no difference for user-defined SP-GiST opclasses, because we weren't allowing the STORAGE clause of CREATE OPCLASS to be used, so the two types would be the same. But it's silly not to allow that, seeing that the built-in poly_ops opclass has a different value for opckeytype than opcintype, and that if you want to do lossy storage then the types must really be different. (Thus, user-defined opclasses doing lossy storage had to lie about what type is in the index.) Hence, remove the restriction, and make sure that we use the input column type not opckeytype where relevant. For reasons of backwards compatibility with existing user-defined opclasses, we can't quite insist that the specified leafType match the STORAGE clause; instead just add an amvalidate() warning if they don't match. Also fix some bugs that would only manifest when trying to return index entries when attType is different from attLeafType. It's not too surprising that these have not been reported, because the only usual reason for such a difference is to store the leaf value lossily, rendering index-only scans impossible. Add a src/test/modules module to exercise cases where attType is different from attLeafType and yet index-only scan is supported. Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us	5 years ago
Tom Lane	1ebdec8c03	Rethink handling of pass-by-value leaf datums in SP-GiST. ... The existing convention in SP-GiST is that any pass-by-value datatype is stored in Datum representation, i.e. it's of width sizeof(Datum) even when typlen is less than that. This is okay, or at least it's too late to change it, for prefix datums and node-label datums in inner (upper) tuples. But it's problematic for leaf datums, because we'd prefer those to be stored in Postgres' standard on-disk representation so that we can easily extend leaf tuples to carry additional "included" columns. I believe, however, that we can get away with just up and changing that. This would be an unacceptable on-disk-format break, but there are two big mitigating factors: 1. It seems quite unlikely that there are any SP-GiST opclasses out there that use pass-by-value leaf datatypes. Certainly none of the ones in core do, nor has codesearch.debian.net heard of any. Given what SP-GiST is good for, it's hard to conceive of a use-case where the leaf-level values would be both small and fixed-width. (As an example, if you wanted to index text values with the leaf level being just a byte, then every text string would have to be represented with one level of inner tuple per preceding byte, which would be horrendously space-inefficient and slow to access. You always want to use as few inner-tuple levels as possible, leaving as much as possible in the leaf values.) 2. Even granting that you have such an index, this change only breaks things on big-endian machines. On little-endian, the high order bytes of the Datum format will now just appear to be alignment padding space. So, change the code to store pass-by-value leaf datums in their usual on-disk form. Inner-tuple datums are not touched. This is extracted from a larger patch that intends to add support for "included" columns. I'm committing it separately for visibility in our commit logs. Pavel Borisov and Tom Lane, reviewed by Andrey Borodin Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com	5 years ago
Peter Geoghegan	2376361839	VACUUM VERBOSE: Count "newly deleted" index pages. ... Teach VACUUM VERBOSE to report on pages deleted by the _current_ VACUUM operation -- these are newly deleted pages. VACUUM VERBOSE continues to report on the total number of deleted pages in the entire index (no change there). The former is a subset of the latter. The distinction between each category of deleted index page only arises with index AMs where page deletion is supported and is decoupled from page recycling for performance reasons. This is follow-up work to commit e5d8a999, which made nbtree store 64-bit XIDs (not 32-bit XIDs) in pages at the point at which they're deleted. Note that the btm_last_cleanup_num_delpages metapage field added by that commit usually gets set to pages_newly_deleted. The exceptions (the scenarios in which they're not equal) all seem to be tricky cases for the implementation (of page deletion and recycling) in general. Author: Peter Geoghegan <pg@bowt.ie> Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX%3Dd5u-tRYhi-F4wnV2uN2zHpMUXw%40mail.gmail.com	5 years ago
Peter Geoghegan	9dc718bdf2	Pass down "logically unchanged index" hint. ... Add an executor aminsert() hint mechanism that informs index AMs that the incoming index tuple (the tuple that accompanies the hint) is not being inserted by execution of an SQL statement that logically modifies any of the index's key columns. The hint is received by indexes when an UPDATE takes place that does not apply an optimization like heapam's HOT (though only for indexes where all key columns are logically unchanged). Any index tuple that receives the hint on insert is expected to be a duplicate of at least one existing older version that is needed for the same logical row. Related versions will typically be stored on the same index page, at least within index AMs that apply the hint. Recognizing the difference between MVCC version churn duplicates and true logical row duplicates at the index AM level can help with cleanup of garbage index tuples. Cleanup can intelligently target tuples that are likely to be garbage, without wasting too many cycles on less promising tuples/pages (index pages with little or no version churn). This is infrastructure for an upcoming commit that will teach nbtree to perform bottom-up index deletion. No index AM actually applies the hint just yet. Author: Peter Geoghegan <pg@bowt.ie> Reviewed-By: Victor Yegorov <vyegorov@gmail.com> Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com	5 years ago
Bruce Momjian	ca3b37487b	Update copyright for 2021 ... Backpatch-through: 9.5	5 years ago
Tom Lane	0cc9932788	Rename the "point is strictly above/below point" comparison operators. ... Historically these were called >^ and <^, but that is inconsistent with the similar box, polygon, and circle operators, which are named |>> and <<| respectively. Worse, the >^ and <^ names are used for *not* strict above/below tests for the box type. Hence, invent new operators following the more common naming. The old operators remain available for now, and are still accepted by the relevant index opclasses too. But there's a deprecation notice, so maybe we can get rid of them someday. Emre Hasegeli, reviewed by Pavel Borisov Discussion: https://postgr.es/m/24348.1587444160@sss.pgh.pa.us	5 years ago
Andres Freund	dc7420c2c9	snapshot scalability: Don't compute global horizons while building snapshots. ... To make GetSnapshotData() more scalable, it cannot not look at at each proc's xmin: While snapshot contents do not need to change whenever a read-only transaction commits or a snapshot is released, a proc's xmin is modified in those cases. The frequency of xmin modifications leads to, particularly on higher core count systems, many cache misses inside GetSnapshotData(), despite the data underlying a snapshot not changing. That is the most significant source of GetSnapshotData() scaling poorly on larger systems. Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons / thresholds as it has so far. But we don't really have to: The horizons don't actually change that much between GetSnapshotData() calls. Nor are the horizons actually used every time a snapshot is built. The trick this commit introduces is to delay computation of accurate horizons until there use and using horizon boundaries to determine whether accurate horizons need to be computed. The use of RecentGlobal[Data]Xmin to decide whether a row version could be removed has been replaces with new GlobalVisTest* functions. These use two thresholds to determine whether a row can be pruned: 1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed are definitely still visible. 2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can definitely be removed GetSnapshotData() updates definitely_needed to be the xmin of the computed snapshot. When testing whether a row can be removed (with GlobalVisTestIsRemovableXid()) and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID < definitely_needed) the boundaries can be recomputed to be more accurate. As it is not cheap to compute accurate boundaries, we limit the number of times that happens in short succession. As the boundaries used by GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by GetSnapshotData()), it is likely that further test can benefit from an earlier computation of accurate horizons. To avoid regressing performance when old_snapshot_threshold is set (as that requires an accurate horizon to be computed), heap_page_prune_opt() doesn't unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the computation of the limited horizon, and the triggering of errors (with SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove tuples. This commit just removes the accesses to PGXACT->xmin from GetSnapshotData(), but other members of PGXACT residing in the same cache line are accessed. Therefore this in itself does not result in a significant improvement. Subsequent commits will take advantage of the fact that GetSnapshotData() now does not need to access xmins anymore. Note: This contains a workaround in heap_page_prune_opt() to keep the snapshot_too_old tests working. While that workaround is ugly, the tests currently are not meaningful, and it seems best to address them separately. Author: Andres Freund <andres@anarazel.de> Reviewed-By: Robert Haas <robertmhaas@gmail.com> Reviewed-By: Thomas Munro <thomas.munro@gmail.com> Reviewed-By: David Rowley <dgrowleyml@gmail.com> Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de	5 years ago
Tom Lane	9f9682783b	Invent "amadjustmembers" AM method for validating opclass members. ... This allows AM-specific knowledge to be applied during creation of pg_amop and pg_amproc entries. Specifically, the AM knows better than core code which entries to consider as required or optional. Giving the latter entries the appropriate sort of dependency allows them to be dropped without taking out the whole opclass or opfamily; which is something we'd like to have to correct obsolescent entries in extensions. This callback also opens the door to performing AM-specific validity checks during opclass creation, rather than hoping than an opclass developer will remember to test with "amvalidate". For the most part I've not actually added any such checks yet; that can happen in a follow-on patch. (Note that we shouldn't remove any tests from "amvalidate", as those are still needed to cross-check manually constructed entries in the initdb data. So adding tests to "amadjustmembers" will be somewhat duplicative, but it seems like a good idea anyway.) Patch by me, reviewed by Alexander Korotkov, Hamid Akhtar, and Anastasia Lubennikova. Discussion: https://postgr.es/m/4578.1565195302@sss.pgh.pa.us	5 years ago
Alexander Korotkov	a44dd932ff	Fix masking of SP-GiST pages during xlog consistency check ... spg_mask() didn't take into account that pd_lower equal to SizeOfPageHeaderData is still valid value. This commit fixes that. Backpatch to 11, where spg_mask() pg_lower check was introduced. Reported-by: Michael Paquier Discussion: https://postgr.es/m/20200615131405.GM52676%40paquier.xyz Backpatch-through: 11	6 years ago
Tom Lane	5cbfce562f	Initial pgindent and pgperltidy run for v13. ... Includes some manual cleanup of places that pgindent messed up, most of which weren't per project style anyway. Notably, it seems some people didn't absorb the style rules of commit c9d297751, because there were a bunch of new occurrences of function calls with a newline just after the left paren, all with faulty expectations about how the rest of the call would get indented.	6 years ago
Alexander Korotkov	364bdd0b41	Fix missing SP-GiST support in 911e702077 ... 911e702077 misses setting of amoptsprocnum for SP-GiST. This commit fixes that.	6 years ago
Alexander Korotkov	911e702077	Implement operator class parameters ... PostgreSQL provides set of template index access methods, where opclasses have much freedom in the semantics of indexing. These index AMs are GiST, GIN, SP-GiST and BRIN. There opclasses define representation of keys, operations on them and supported search strategies. So, it's natural that opclasses may be faced some tradeoffs, which require user-side decision. This commit implements opclass parameters allowing users to set some values, which tell opclass how to index the particular dataset. This commit doesn't introduce new storage in system catalog. Instead it uses pg_attribute.attoptions, which is used for table column storage options but unused for index attributes. In order to evade changing signature of each opclass support function, we implement unified way to pass options to opclass support functions. Options are set to fn_expr as the constant bytea expression. It's possible due to the fact that opclass support functions are executed outside of expressions, so fn_expr is unused for them. This commit comes with some examples of opclass options usage. We parametrize signature length in GiST. That applies to multiple opclasses: tsvector_ops, gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and gist_hstore_ops. Also we parametrize maximum number of integer ranges for gist__int_ops. However, the main future usage of this feature is expected to be json, where users would be able to specify which way to index particular json parts. Catversion is bumped. Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru Author: Nikita Glukhov, revised by me Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera	6 years ago
Alvaro Herrera	c9d2977519	Clean up newlines following left parentheses ... We used to strategically place newlines after some function call left parentheses to make pgindent move the argument list a few chars to the left, so that the whole line would fit under 80 chars. However, pgindent no longer does that, so the newlines just made the code vertically longer for no reason. Remove those newlines, and reflow some of those lines for some extra naturality. Reviewed-by: Michael Paquier, Tom Lane Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql	6 years ago
Amit Kapila	4d8a8d0c73	Introduce IndexAM fields for parallel vacuum. ... Introduce new fields amusemaintenanceworkmem and amparallelvacuumoptions in IndexAmRoutine for parallel vacuum. The amusemaintenanceworkmem tells whether a particular IndexAM uses maintenance_work_mem or not. This will help in controlling the memory used by individual workers as otherwise, each worker can consume memory equal to maintenance_work_mem. The amparallelvacuumoptions tell whether a particular IndexAM participates in a parallel vacuum and if so in which phase (bulkdelete, vacuumcleanup) of vacuum. Author: Masahiko Sawada and Amit Kapila Reviewed-by: Dilip Kumar, Amit Kapila, Tomas Vondra and Robert Haas Discussion: https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.com https://postgr.es/m/CAA4eK1LmcD5aPogzwim5Nn58Ki+74a6Edghx4Wd8hAskvHaq5A@mail.gmail.com	6 years ago
Bruce Momjian	7559d8ebfa	Update copyrights for 2020 ... Backpatch-through: update all files in master, backpatch legal files through 9.4	6 years ago
Michael Paquier	7854e07f25	Revert "Rename files and headers related to index AM" ... This follows multiple complains from Peter Geoghegan, Andres Freund and Alvaro Herrera that this issue ought to be dug more before actually happening, if it happens. Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql	6 years ago
Michael Paquier	8ce3aa9b59	Rename files and headers related to index AM ... The following renaming is done so as source files related to index access methods are more consistent with table access methods (the original names used for index AMs ware too generic, and could be confused as including features related to table AMs): - amapi.h -> indexam.h. - amapi.c -> indexamapi.c. Here we have an equivalent with backend/access/table/tableamapi.c. - amvalidate.c -> indexamvalidate.c. - amvalidate.h -> indexamvalidate.h. - genam.c -> indexgenam.c. - genam.h -> indexgenam.h. This has been discussed during the development of v12 when table AM was worked on, but the renaming never happened. Author: Michael Paquier Reviewed-by: Fabien Coelho, Julien Rouhaud Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz	6 years ago
Michael Paquier	4cb658af70	Refactor reloption handling for index AMs in-core ... This reworks the reloption parsing and build of a couple of index AMs by creating new structures for each index AM's options. This split was already done for BRIN, GIN and GiST (which actually has a fillfactor parameter), but not for hash, B-tree and SPGiST which relied on StdRdOptions due to an overlap with the default option set. This saves a couple of bytes for rd_options in each relcache entry with indexes making use of relation options, and brings more consistency between all index AMs. While on it, add a couple of AssertMacro() calls to make sure that utility macros to grab values of reloptions are used with the expected index AM. Author: Nikolay Shaplov Reviewed-by: Amit Langote, Michael Paquier, Álvaro Herrera, Dent John Discussion: https://postgr.es/m/4127670.gFlpRb6XCm@x200m	6 years ago
Amit Kapila	14aec03502	Make the order of the header file includes consistent in backend modules. ... Similar to commits 7e735035f2 and dddf4cdc33, this commit makes the order of header file inclusion consistent for backend modules. In the passing, removed a couple of duplicate inclusions. Author: Vignesh C Reviewed-by: Kuntal Ghosh and Amit Kapila Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com	6 years ago