Previously, we had consecutive, very short chapters called "Generic
WAL" and "Custom WAL Resource Managers," explaining different approaches
to the same problem. Merge them into a single chapter. Explain most
of the differences between the approaches in the chapter's
introductory text, rather than in the individual sections.
Discussion: http://postgr.es/m/46ac50c1-6b2a-404f-a683-b67af6ab56e9@eisentraut.org
The documentation for SET ROLE states that superusers who switch to
a non-superuser role lose their superuser privileges. While this
is true for most commands, there are exceptions such as SET ROLE
and SET SESSION AUTHORIZATION, which continue to use the current
session user and the authenticated user, respectively.
Furthermore, the description of this command already describes its
effect, so it is arguably unnecessary to include this special case.
This commit removes the note about the superuser case and adds a
sentence about the aforementioned exceptions to the description.
Co-authored-by: Yurii Rashkovskii
Reviewed-by: Shubham Khanna, Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/CA%2BRLCQysHtME0znk2KUMJN343ksboSRQSU-hCnOjesX6VK300Q%40mail.gmail.com
This addresses a few problems with commit e5da0fe3c2 ("Catalog domain
not-null constraints").
In CREATE DOMAIN, a NOT NULL constraint looks like
CREATE DOMAIN d1 AS int [ CONSTRAINT conname ] NOT NULL
(Before e5da0fe3c2, the constraint name was accepted but ignored.)
But in ALTER DOMAIN, a NOT NULL constraint looks like
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL VALUE
where VALUE is where for a table constraint the column name would be.
(This works as of e5da0fe3c2. Before e5da0fe3c2, this syntax
resulted in an internal error.)
But for domains, this latter syntax is confusing and needlessly
inconsistent between CREATE and ALTER. So this changes it to just
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL
(None of these syntaxes are per SQL standard; we are just living with
the bits of inconsistency that have built up over time.)
In passing, this also changes the psql \dD output to not show not-null
constraints in the column "Check", since it's already shown in the
column "Nullable". This has also been off since e5da0fe3c2.
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9ec24d7b-633d-463a-84c6-7acff769c9e8%40eisentraut.org
In the libpq encryption negotiation tests, don't run the GSSAPI tests
unless PG_TEST_EXTRA='kerberos' is also set. That makes it possible to
still run most of the tests when GSSAPI support is compiled in, but
there's no MIT Kerberos installation.
The tools.ietf.org site has been decommissioned and replaced by a
number of sites serving various purposes. Links to RFCs and BCPs
are now 301 redirected to their new respective IETF sites. Since
this serves no purpose and only adds network overhead, update our
links to the new locations.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/3C1CEA99-FCED-447D-9858-5A579B4C6687@yesql.se
Backpatch-through: v12
A NESTED path allows to extract data from nested levels of JSON
objects given by the parent path expression, which are projected as
columns specified using a nested COLUMNS clause, just like the parent
COLUMNS clause. Rows comprised from a NESTED columns are "joined"
to the row comprised from the parent columns. If a particular NESTED
path evaluates to 0 rows, then the nested COLUMNS will emit NULLs,
making it an OUTER join.
NESTED columns themselves may include NESTED paths to allow
extracting data from arbitrary nesting levels, which are likewise
joined against the rows at the parent level.
Multiple NESTED paths at a given level are called "sibling" paths
and their rows are combined by UNIONing them, that is, after being
joined against the parent row as described above.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
When testing buffer pool logic, it is useful to be able to evict
arbitrary blocks. This function can be used in SQL queries over the
pg_buffercache view to set up a wide range of buffer pool states. Of
course, buffer mappings might change concurrently so you might evict a
block other than the one you had in mind, and another session might
bring it back in at any time. That's OK for the intended purpose of
setting up developer testing scenarios, and more complicated interlocking
schemes to give stronger guararantees about that would likely be less
flexible for actual testing work anyway. Superuser-only.
Author: Palak Chaturvedi <chaturvedipalak1911@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com> (docs, small tweaks)
Reviewed-by: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Cary Huang <cary.huang@highgo.ca>
Reviewed-by: Cédric Villemain <cedric.villemain+pgsql@abcsql.com>
Reviewed-by: Jim Nasby <jim.nasby@gmail.com>
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CALfch19pW48ZwWzUoRSpsaV9hqt0UPyaBPC4bOZ4W+c7FF566A@mail.gmail.com
libpq now always tries to send ALPN. With the traditional negotiated
SSL connections, the server accepts the ALPN, and refuses the
connection if it's not what we expect, but connecting without ALPN is
still OK. With the new direct SSL connections, ALPN is mandatory.
NOTE: This uses "TBD-pgsql" as the protocol ID. We must register a
proper one with IANA before the release!
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
By skipping SSLRequest, you can eliminate one round-trip when
establishing a TLS connection. It is also more friendly to generic TLS
proxies that don't understand the PostgreSQL protocol.
This is disabled by default in libpq, because the direct TLS handshake
will fail with old server versions. It can be enabled with the
sslnegotation=direct option. It will still fall back to the negotiated
TLS handshake if the server rejects the direct attempt, either because
it is an older version or the server doesn't support TLS at all, but
the fallback can be disabled with the sslnegotiation=requiredirect
option.
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
Replace (expr op C1) OR (expr op C2) ... with expr op ANY(ARRAY[C1, C2, ...])
on the preliminary stage of optimization when we are still working with the
expression tree.
Here Cn is a n-th constant expression, 'expr' is non-constant expression, 'op'
is an operator which returns boolean result and has a commuter (for the case
of reverse order of constant and non-constant parts of the expression,
like 'Cn op expr').
Sometimes it can lead to not optimal plan. This is why there is a
or_to_any_transform_limit GUC. It specifies a threshold value of length of
arguments in an OR expression that triggers the OR-to-ANY transformation.
Generally, more groupable OR arguments mean that transformation will be more
likely to win than to lose.
Discussion: https://postgr.es/m/567ED6CA.2040504%40sigaev.ru
Author: Alena Rybakina <lena.ribackina@yandex.ru>
Author: Andrey Lepikhov <a.lepikhov@postgrespro.ru>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
What the documentation calls an exclude_element is an index_elem
according to gram.y, and it allows all the same options that
a CREATE INDEX column specification does. The COLLATE patch
neglected to update the CREATE/ALTER TABLE docs about that,
and later the opclass-parameters patch made the same oversight.
Add those options to the syntax synopses, and polish the
associated text a bit.
Back-patch to v13 where opclass parameters came in. We could
update v12 with just the COLLATE omission, but it doesn't quite
seem worth the trouble at this point.
Shihao Zhong, reviewed by Daniel Vérité, Shubham Khanna and myself
Discussion: https://postgr.es/m/CAGRkXqShbVyB8E3gapfdtuwiWTiK=Q67Qb9qwxu=+-w0w46EBA@mail.gmail.com
This patch generalizes libpq's existing single-row mode to allow
individual partial-result PGresults to contain up to N rows, rather
than always one row. This reduces malloc overhead compared to plain
single-row mode, and it is very useful for psql's FETCH_COUNT feature,
since otherwise we'd have to add code (and cycles) to either merge
single-row PGresults into a bigger one or teach psql's
results-printing logic to accept arrays of PGresults.
To avoid API breakage, PQsetSingleRowMode() remains the same, and we
add a new function PQsetChunkedRowsMode() to invoke the more general
case. Also, PGresults obtained the old way continue to carry the
PGRES_SINGLE_TUPLE status code, while if PQsetChunkedRowsMode() is
used then their status code is PGRES_TUPLES_CHUNK. The underlying
logic is the same either way, though.
Daniel Vérité, reviewed by Laurenz Albe and myself (and whacked
around a bit by me, so any remaining bugs are my fault)
Discussion: https://postgr.es/m/CAKZiRmxsVTkO928CM+-ADvsMyePmU3L9DQCa9NwqjvLPcEe5QA@mail.gmail.com
This new DDL command splits a single partition into several parititions.
Just like ALTER TABLE ... MERGE PARTITIONS ... command, new patitions are
created using createPartitionTable() function with parent partition as the
template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
This new DDL command merges several partitions into the one partition of the
target table. The target partition is created using new
createPartitionTable() function with parent partition as the template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
Commit 9e8da0f7 taught nbtree to handle ScalarArrayOpExpr quals
natively. This works by pushing down the full context (the array keys)
to the nbtree index AM, enabling it to execute multiple primitive index
scans that the planner treats as one continuous index scan/index path.
This earlier enhancement enabled nbtree ScalarArrayOp index-only scans.
It also allowed scans with ScalarArrayOp quals to return ordered results
(with some notable restrictions, described further down).
Take this general approach a lot further: teach nbtree SAOP index scans
to decide how to execute ScalarArrayOp scans (when and where to start
the next primitive index scan) based on physical index characteristics.
This can be far more efficient. All SAOP scans will now reliably avoid
duplicative leaf page accesses (just like any other nbtree index scan).
SAOP scans whose array keys are naturally clustered together now require
far fewer index descents, since we'll reliably avoid starting a new
primitive scan just to get to a later offset from the same leaf page.
The scan's arrays now advance using binary searches for the array
element that best matches the next tuple's attribute value. Required
scan key arrays (i.e. arrays from scan keys that can terminate the scan)
ratchet forward in lockstep with the index scan. Non-required arrays
(i.e. arrays from scan keys that can only exclude non-matching tuples)
"advance" without the process ever rolling over to a higher-order array.
Naturally, only required SAOP scan keys trigger skipping over leaf pages
(non-required arrays cannot safely end or start primitive index scans).
Consequently, even index scans of a composite index with a high-order
inequality scan key (which we'll mark required) and a low-order SAOP
scan key (which we won't mark required) now avoid repeating leaf page
accesses -- that benefit isn't limited to simpler equality-only cases.
In general, all nbtree index scans now output tuples as if they were one
continuous index scan -- even scans that mix a high-order inequality
with lower-order SAOP equalities reliably output tuples in index order.
This allows us to remove a couple of special cases that were applied
when building index paths with SAOP clauses during planning.
Bugfix commit 807a40c5 taught the planner to avoid generating unsafe
path keys: path keys on a multicolumn index path, with a SAOP clause on
any attribute beyond the first/most significant attribute. These cases
are now all safe, so we go back to generating path keys without regard
for the presence of SAOP clauses (just like with any other clause type).
Affected queries can now exploit scan output order in all the usual ways
(e.g., certain "ORDER BY ... LIMIT n" queries can now terminate early).
Also undo changes from follow-up bugfix commit a4523c5a, which taught
the planner to produce alternative index paths, with path keys, but
without low-order SAOP index quals (filter quals were used instead).
We'll no longer generate these alternative paths, since they can no
longer offer any meaningful advantages over standard index qual paths.
Affected queries thereby avoid all of the disadvantages that come from
using filter quals within index scan nodes. They can avoid extra heap
page accesses from using filter quals to exclude non-matching tuples
(index quals will never have that problem). They can also skip over
irrelevant sections of the index in more cases (though only when nbtree
determines that starting another primitive scan actually makes sense).
There is a theoretical risk that removing restrictions on SAOP index
paths from the planner will break compatibility with amcanorder-based
index AMs maintained as extensions. Such an index AM could have the
same limitations around ordered SAOP scans as nbtree had up until now.
Adding a pro forma incompatibility item about the issue to the Postgres
17 release notes seems like a good idea.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CAH2-Wz=ksvN_sjcnD1+Bt-WtifRA5ok48aDYnq3pkKhxgMQpcw@mail.gmail.com
The BAS_VACUUM ring size has been 256kB since commit d526575f introduced
the mechanism 17 years ago. Commit 1cbbee03 recently made it
configurable but retained the traditional default. The correct default
size has been debated for years, but 256kB is certainly very small.
VACUUM soon needs to write back data it dirtied only 32 blocks ago,
which usually requires flushing the WAL. New experiments in prefetching
pages for VACUUM exacerbated the problem by crashing into dirty data
even sooner. Let's make the default 2MB. That's 1.6% of the default
toy buffer pool size, and 0.2% of 1GB, which would be a considered a
small shared_buffers setting for a real system these days. Users are
still free to set the GUC to a different value.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20240403221257.md4gfki3z75cdyf6%40awork3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGLY4Q4ZY4f1rvnFtv6%2BPkjNf8MejdPkcju3Qii9DYqqcQ%40mail.gmail.com
Adds --clone/--copy-file-range options to pg_combinebackup, to allow
copying files using file cloning or copy_file_range(). These methods may
be faster than the standard block-by-block copy, but the main advantage
is that they enable various features provided by CoW filesystems.
This commit only uses these copy methods for files that did not change
and can be copied as a whole from a single backup.
These new copy methods may not be available on all platforms, in which
case the command throws an error (immediately, even if no files would be
copied as a whole). This early failure seems better than failing later
when trying to copy the first file, after performing a lot of work on
earlier files.
If the requested copy method is available, but a checksum needs to be
recalculated (e.g. because of a different checksum type), the file is
still copied using the requested method, but it is also read for the
checksum calculation. Depending on the filesystem this may be more
expensive than just performing the simple copy, but it does enable the
CoW benefits.
Initial patch by Jakub Wartak, various reworks and improvements by me.
Author: Tomas Vondra, Jakub Wartak
Reviewed-by: Thomas Munro, Jakub Wartak, Robert Haas
Discussion: https://postgr.es/m/3024283a-7491-4240-80d0-421575f6bb23%40enterprisedb.com
The documentation index is getting very long, which makes it hard
to find things. Since these chapters are all very similar in structure
and content, merging them is a natural way of reducing the size of
the toplevel index.
Rather than actually combining all of the SGML into a single file,
keep one file per <sect1>, and add a glue file that includes all
of them.
Discussion: http://postgr.es/m/CA+Tgmob7_uoYuS2=rVwpVXaRwP-UXz+++saYTC-BCZ42QzSNKQ@mail.gmail.com
This commit does two things:
1) Maintains inactive_since for sync slots whenever the slot is released
just like any other regular slot.
2) Ensures the value is set to the current timestamp during the promotion
of standby to help correctly interpret the time after promotion. We don't
want the slots to appear inactive for a long time after promotion if they
haven't been synchronized recently. This would also avoid the invalidation
of such slots immediately after promotion if tomorrow we have a feature
that invalidates slots based on their inactivity time. Whoever acquires
the slot i.e. makes the slot active will reset it to NULL.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Amit Kapila, Shveta Malik, Masahiko Sawada
Discussion: https://postgr.es/m/CAA4eK1KrPGwfZV9LYGidjxHeW+rxJ=E2ThjXvwRGLO=iLNuo=Q@mail.gmail.com
Discussion: https://postgr.es/m/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmob_Ta-t2ty8QrKHBGnNLrf4ZYcwhGHGFsuUoFrAEDw4sA@mail.gmail.com
JSON_TABLE() allows JSON data to be converted into a relational view
and thus used, for example, in a FROM clause, like other tabular
data. Data to show in the view is selected from a source JSON object
using a JSON path expression to get a sequence of JSON objects that's
called a "row pattern", which becomes the source to compute the
SQL/JSON values that populate the view's output columns. Column
values themselves are computed using JSON path expressions applied to
each of the JSON objects comprising the "row pattern", for which the
SQL/JSON query functions added in 6185c9737c are used.
To implement JSON_TABLE() as a table function, this augments the
TableFunc and TableFuncScanState nodes that are currently used to
support XMLTABLE() with some JSON_TABLE()-specific fields.
Note that the JSON_TABLE() spec includes NESTED COLUMNS and PLAN
clauses, which are required to provide more flexibility to extract
data out of nested JSON objects, but they are not implemented here
to keep this commit of manageable size.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
EXPLAIN (ANALYZE, SERIALIZE) allows collection of statistics about
the volume of data emitted by a query, as well as the time taken
to convert the data to the on-the-wire format. Previously there
was no way to investigate this without actually sending the data
to the client, in which case network transmission costs might
swamp what you wanted to see. In particular this feature allows
investigating the costs of de-TOASTing compressed or out-of-line
data during formatting.
Stepan Rutz and Matthias van de Meent,
reviewed by Tomas Vondra and myself
Discussion: https://postgr.es/m/ca0adb0e-fa4e-c37e-1cd7-91170b18cae1@gmx.de
Presently, the archiver process restarts when an archive callback
ERRORs. To avoid this, archive module authors can use sigsetjmp(),
manage a memory context, etc., but that requires a lot of extra
code that will likely look roughly the same between modules. This
commit adds basic archive callback ERROR handling to pgarch.c so
that module authors won't ordinarily need to worry about this.
While this built-in handler attempts to clean up anything that an
archive module could conceivably have left behind, it is possible
that some modules are doing unexpected things that require
additional cleanup. Module authors should be sure to do any extra
required cleanup in a PG_CATCH block within the archiving callback.
The archiving callback is now called in a short-lived memory
context that the archiver process resets between invocations. If a
module requires longer-lived storage, it must maintain its own
memory context.
Thanks to these changes, the basic_archive module can be greatly
simplified.
Suggested-by: Andres Freund
Reviewed-by: Andres Freund, Yong Li
Discussion: https://postgr.es/m/20230217215624.GA3131134%40nathanxps13
pg_wal_replay_wait() is to be used on standby and specifies waiting for
the specific WAL location to be replayed before starting the transaction.
This option is useful when the user makes some data changes on primary and
needs a guarantee to see these changes on standby.
The queue of waiters is stored in the shared memory array sorted by LSN.
During replay of WAL waiters whose LSNs are already replayed are deleted from
the shared memory array and woken up by setting of their latches.
pg_wal_replay_wait() needs to wait without any snapshot held. Otherwise,
the snapshot could prevent the replay of WAL records implying a kind of
self-deadlock. This is why it is only possible to implement
pg_wal_replay_wait() as a procedure working in a non-atomic context,
not a function.
Catversion is bumped.
Discussion: https://postgr.es/m/eb12f9b03851bb2583adab5df9579b4b%40postgrespro.ru
Author: Kartyshov Ivan, Alexander Korotkov
Reviewed-by: Michael Paquier, Peter Eisentraut, Dilip Kumar, Amit Kapila
Reviewed-by: Alexander Lakhin, Bharath Rupireddy, Euler Taveira
This is useful when connecting to a database asynchronously via
PQconnectStart(), since it handles deciding between poll() and
select(), and some of the required boilerplate.
Tristan Partin, reviewed by Gurjeet Singh, Heikki Linnakangas, Jelte
Fennema-Nio, and me.
Discussion: http://postgr.es/m/D08WWCPVHKHN.3QELIKZJ2D9RZ@neon.tech
Break ReadBuffer() up into two steps. StartReadBuffers() and
WaitReadBuffers() give us two main advantages:
1. Multiple consecutive blocks can be read with one system call.
2. Advice (hints of future reads) can optionally be issued to the
kernel ahead of time.
The traditional ReadBuffer() function is now implemented in terms of
those functions, to avoid duplication.
A new GUC io_combine_limit is defined, and the functions for limiting
per-backend pin counts are made into public APIs. Those are provided
for use by callers of StartReadBuffers(), when deciding how many buffers
to read at once. The following commit will add a higher level mechanism
for doing that automatically with a practical interface.
With some more infrastructure in later work, StartReadBuffers() could
be extended to start real asynchronous I/O instead of just issuing
advice and leaving WaitReadBuffers() to do the work synchronously.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de> (some optimization tweaks)
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Tested-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
Previously, we used a simple array for storing dead tuple IDs during
lazy vacuum, which had a number of problems:
* The array used a single allocation and so was limited to 1GB.
* The allocation was pessimistically sized according to table size.
* Lookup with binary search was slow because of poor CPU cache and
branch prediction behavior.
This commit replaces that array with the TID store from commit
30e144287a.
Since the backing radix tree makes small allocations as needed, the
1GB limit is now gone. Further, the total memory used is now often
smaller by an order of magnitude or more, depending on the
distribution of blocks and offsets. These two features should make
multiple rounds of heap scanning and index cleanup an extremely rare
event. TID lookup during index cleanup is also several times faster,
even more so when index order is correlated with heap tuple order.
Since there is no longer a predictable relationship between the number
of dead tuples vacuumed and the space taken up by their TIDs, the
number of tuples no longer provides any meaningful insights for users,
nor is the maximum number predictable. For that reason this commit
also changes to byte-based progress reporting, with the relevant
columns of pg_stat_progress_vacuum renamed accordingly to
max_dead_tuple_bytes and dead_tuple_bytes.
For parallel vacuum, both the TID store and supplemental information
specific to vacuum are shared among the parallel vacuum workers. As
with the previous array, we don't take any locks on TidStore during
parallel vacuum since writes are still only done by the leader
process.
Bump catalog version.
Reviewed-by: John Naylor, (in an earlier version) Dilip Kumar
Discussion: https://postgr.es/m/CAD21AoAfOZvmfR0j8VmZorZjL7RhTiQdVttNuC4W-Shdc2a-AA%40mail.gmail.com
This patch allows pg_restore to wrap its commands into transaction
blocks, somewhat like --single-transaction, except that we commit
and start a new block after every N objects. Using this mode
with a size limit of 1000 or so objects greatly reduces the number
of transactions consumed by the restore, while preventing any
one transaction from taking enough locks to overrun the receiving
server's shared lock table.
(A value of 1000 works well with the default lock table size of
around 6400 locks. Higher --transaction-size values can be used
if one has increased the receiving server's lock table size.)
Excessive consumption of XIDs has been reported as a problem for
pg_upgrade in particular, but it could be bad for any restore; and the
change also reduces the number of fsyncs and amount of WAL generated,
so it should provide speed benefits too.
This patch does not try to make parallel workers batch the SQL
commands they issue. The trouble with doing that is that other
workers may need to see the objects a worker creates right away.
Possibly this can be improved later.
In this patch I have hard-wired pg_upgrade to use a transaction size
of 1000 divided by the number of parallel restore jobs allowed
(without that, we'd still be at risk of overrunning the shared lock
table). Perhaps there would be value in adding another pg_upgrade
option to allow user control of that, but I'm unsure that it's worth
the trouble; I think few users would use it, and any who did would see
not that much benefit compared to the default.
Patch by me, but the original idea to batch SQL commands during
restore is due to Robins Tharakan.
Discussion: https://postgr.es/m/a9f9376f1c3343a6bb319dce294e20ac@EX13D05UWC001.ant.amazon.com
This commit adds a new COPY option LOG_VERBOSITY, which controls the
amount of messages emitted during processing. Valid values are
'default' and 'verbose'.
This is currently used in COPY FROM when ON_ERROR option is set to
ignore. If 'verbose' is specified, a NOTICE message is emitted for
each discarded row, providing additional information such as line
number, column name, and the malformed value. This helps users to
identify problematic rows that failed to load.
Author: Bharath Rupireddy
Reviewed-by: Michael Paquier, Atsushi Torikoshi, Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/CALj2ACUk700cYhx1ATRQyRw-fBM%2BaRo6auRAitKGff7XNmYfqQ%40mail.gmail.com
This SQL-callable function behaves much like our internal utility
function getBaseType(), except it returns NULL rather than failing for
an invalid type OID. (That behavior is modeled on our experience with
other catalog-inquiry functions such as the ACL checking functions.)
The key advantage over doing a join to pg_type is that it will loop
as needed to find the bottom base type of a nest of domains.
Steve Chavez, reviewed by jian he and others
Discussion: https://postgr.es/m/CAGRrpzZSX8j=MQcbCSEisFA=ic=K3bknVfnFjAv1diVJxFHJvg@mail.gmail.com
This allows MERGE commands to include WHEN NOT MATCHED BY SOURCE
actions, which operate on rows that exist in the target relation, but
not in the data source. These actions can execute UPDATE, DELETE, or
DO NOTHING sub-commands.
This is in contrast to already-supported WHEN NOT MATCHED actions,
which operate on rows that exist in the data source, but not in the
target relation. To make this distinction clearer, such actions may
now be written as WHEN NOT MATCHED BY TARGET.
Writing WHEN NOT MATCHED without specifying BY SOURCE or BY TARGET is
equivalent to writing WHEN NOT MATCHED BY TARGET.
Dean Rasheed, reviewed by Alvaro Herrera, Ted Yu and Vik Fearing.
Discussion: https://postgr.es/m/CAEZATCWqnKGc57Y_JanUBHQXNKcXd7r=0R4NEZUVwP+syRkWbA@mail.gmail.com
This is marked PGC_SIGHUP, so it can only be set in a configuration
file, not anywhere else; and it is also marked GUC_DISALLOW_IN_AUTO_FILE,
so it can't be set using ALTER SYSTEM. When set to false, the
ALTER SYSTEM command is disallowed.
There was considerable concern that this would be misinterpreted as
a security feature, which it is not, because a determined superuser
has various ways of bypassing it. Hence, a lot of work has gone into
wordsmithing the documentation, in the hopes of avoiding any such
confusion.
Jelte Fennemia-Nio and Gabriele Bartolini, with wording suggestions
for the documentation from many others.
Discussion: http://postgr.es/m/CA%2BVUV5rEKt2%2BCdC_KUaPoihMu%2Bi5ChT4WVNTr4CD5-xXZUfuQw%40mail.gmail.com
Allow use of BeginInternalSubTransaction() in parallel mode, so long
as the subtransaction doesn't attempt to acquire an XID or increment
the command counter. Given those restrictions, the other parallel
processes don't need to know about the subtransaction at all, so
this should be safe. The benefit is that it allows subtransactions
intended for error recovery, such as pl/pgsql exception blocks,
to be used in PARALLEL SAFE functions.
Another reason for doing this is that the API of
BeginInternalSubTransaction() doesn't allow reporting failure.
pl/python for one, and perhaps other PLs, copes very poorly with an
error longjmp out of BeginInternalSubTransaction(). The headline
feature of this patch removes the only easily-triggerable failure
case within that function. There remain some resource-exhaustion
and similar cases, which we now deal with by promoting them to FATAL
errors, so that callers need not try to clean up. (It is likely
that such errors would leave us with corrupted transaction state
inside xact.c, making recovery difficult if not impossible anyway.)
Although this work started because of a report of a pl/python crash,
we're not going to do anything about that in the back branches.
Back-patching this particular fix is obviously not very wise.
While we could contemplate some narrower band-aid, pl/python is
already an untrusted language, so it seems okay to classify this
as a "so don't do that" case.
Patch by me, per report from Hao Zhang. Thanks to Robert Haas for
review.
Discussion: https://postgr.es/m/CALY6Dr-2yLVeVPhNMhuBnRgOZo1UjoTETgtKBx1B2gUi8yy+3g@mail.gmail.com
This adds 3 new variants of the random() function:
random(min integer, max integer) returns integer
random(min bigint, max bigint) returns bigint
random(min numeric, max numeric) returns numeric
Each returns a random number x in the range min <= x <= max.
For the numeric function, the number of digits after the decimal point
is equal to the number of digits that "min" or "max" has after the
decimal point, whichever has more.
The main entry points for these functions are in a new C source file.
The existing random(), random_normal(), and setseed() functions are
moved there too, so that they can all share the same PRNG state, which
is kept private to that file.
Dean Rasheed, reviewed by Jian He, David Zhang, Aleksander Alekseev,
and Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCV89Vxuq93xQdmc0t-0Y2zeeNQTdsjbmV7dyFBPykbV4Q@mail.gmail.com
Many other utilities use -d to specify the database to use, but
pgbench uses it to enable debug mode. This is causing some users
to accidentally enable it. This commit changes -d to accept the
database name and introduces --dbname. Debug mode can still be
enabled with --debug. This is a backward-incompatible change, but
it has been judged to be worth the trade-off, i.e., some scripts
that use pgbench will need to be updated.
Author: Greg Sabino Mullane
Reviewed-by: Tomas Vondra, Euler Taveira, Alvaro Herrera, David Christensen
Discussion: https://postgr.es/m/CAKAnmmLjAzwVtb%3DVEaeuCtnmOLpzkJ1uJ_XiQ362YdD9B72HSg%40mail.gmail.com
Robert Haas