285 Commits (111944c5ee567f1c45bf0f1ecfdec682af467aa6)

Author	SHA1	Message	Date
Andres Freund	111944c5ee	Replace heapam.h includes with {table, relation}.h where applicable. ... A lot of files only included heapam.h for relation_open, heap_open etc - replace the heapam.h include in those files with the narrower header. Author: Andres Freund Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de	7 years ago
Bruce Momjian	97c39498e5	Update copyright for 2019 ... Backpatch-through: certain files through 9.4	7 years ago
Tom Lane	586b98fdf1	Make type "name" collation-aware. ... The "name" comparison operators now all support collations, making them functionally equivalent to "text" comparisons, except for the different physical representation of the datatype. They do, in fact, mostly share the varstr_cmp and varstr_sortsupport infrastructure, which has been slightly enlarged to handle the case. To avoid changes in the default behavior of the datatype, set name's typcollation to C_COLLATION_OID not DEFAULT_COLLATION_OID, so that by default comparisons to a name value will continue to use strcmp semantics. (This would have been the case for system catalog columns anyway, because of commit 6b0faf723, but doing this makes it true for user-created name columns as well. In particular, this avoids locale-dependent changes in our regression test results.) In consequence, tweak a couple of places that made assumptions about collatable base types always having typcollation DEFAULT_COLLATION_OID. I have not, however, attempted to relax the restriction that user- defined collatable types must have that. Hence, "name" doesn't behave quite like a user-defined type; it acts more like a domain with COLLATE "C". (Conceivably, if we ever get rid of the need for catalog name columns to be fixed-length, "name" could actually become such a domain over text. But that'd be a pretty massive undertaking, and I'm not volunteering.) Discussion: https://postgr.es/m/15938.1544377821@sss.pgh.pa.us	7 years ago
Andres Freund	578b229718	Remove WITH OIDS support, change oid catalog column visibility. ... Previously tables declared WITH OIDS, including a significant fraction of the catalog tables, stored the oid column not as a normal column, but as part of the tuple header. This special column was not shown by default, which was somewhat odd, as it's often (consider e.g. pg_class.oid) one of the more important parts of a row. Neither pg_dump nor COPY included the contents of the oid column by default. The fact that the oid column was not an ordinary column necessitated a significant amount of special case code to support oid columns. That already was painful for the existing, but upcoming work aiming to make table storage pluggable, would have required expanding and duplicating that "specialness" significantly. WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0). Remove it. Removing includes: - CREATE TABLE and ALTER TABLE syntax for declaring the table to be WITH OIDS has been removed (WITH (oids[ = true]) will error out) - pg_dump does not support dumping tables declared WITH OIDS and will issue a warning when dumping one (and ignore the oid column). - restoring an pg_dump archive with pg_restore will warn when restoring a table with oid contents (and ignore the oid column) - COPY will refuse to load binary dump that includes oids. - pg_upgrade will error out when encountering tables declared WITH OIDS, they have to be altered to remove the oid column first. - Functionality to access the oid of the last inserted row (like plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed. The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false) for CREATE TABLE) is still supported. While that requires a bit of support code, it seems unnecessary to break applications / dumps that do not use oids, and are explicit about not using them. The biggest user of WITH OID columns was postgres' catalog. This commit changes all 'magic' oid columns to be columns that are normally declared and stored. To reduce unnecessary query breakage all the newly added columns are still named 'oid', even if a table's column naming scheme would indicate 'reloid' or such. This obviously requires adapting a lot code, mostly replacing oid access via HeapTupleGetOid() with access to the underlying Form_pg_*->oid column. The bootstrap process now assigns oids for all oid columns in genbki.pl that do not have an explicit value (starting at the largest oid previously used), only oids assigned later by oids will be above FirstBootstrapObjectId. As the oid column now is a normal column the special bootstrap syntax for oids has been removed. Oids are not automatically assigned during insertion anymore, all backend code explicitly assigns oids with GetNewOidWithIndex(). For the rare case that insertions into the catalog via SQL are called for the new pg_nextoid() function can be used (which only works on catalog tables). The fact that oid columns on system tables are now normal columns means that they will be included in the set of columns expanded by * (i.e. SELECT * FROM pg_class will now include the table's oid, previously it did not). It'd not technically be hard to hide oid column by default, but that'd mean confusing behavior would either have to be carried forward forever, or it'd cause breakage down the line. While it's not unlikely that further adjustments are needed, the scope/invasiveness of the patch makes it worthwhile to get merge this now. It's painful to maintain externally, too complicated to commit after the code code freeze, and a dependency of a number of other patches. Catversion bump, for obvious reasons. Author: Andres Freund, with contributions by John Naylor Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de	7 years ago
Tom Lane	fdba460a26	Create an RTE field to record the query's lock mode for each relation. ... Add RangeTblEntry.rellockmode, which records the appropriate lock mode for each RTE_RELATION rangetable entry (either AccessShareLock, RowShareLock, or RowExclusiveLock depending on the RTE's role in the query). This patch creates the field and makes all creators of RTE nodes fill it in reasonably, but for the moment nothing much is done with it. The plan is to replace assorted post-parser logic that re-determines the right lockmode to use with simple uses of rte->rellockmode. For now, just add Asserts in each of those places that the rellockmode matches what they are computing today. (In some cases the match isn't perfect, so the Asserts are weaker than you might expect; but this seems OK, as per discussion.) This passes check-world for me, but it seems worth pushing in this state to see if the buildfarm finds any problems in cases I failed to test. catversion bump due to change of stored rules. Amit Langote, reviewed by David Rowley and Jesper Pedersen, and whacked around a bit more by me Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp	7 years ago
Tom Lane	07a3af0ff8	Fix parsetree representation of XMLTABLE(XMLNAMESPACES(DEFAULT ...)). ... The original coding for XMLTABLE thought it could represent a default namespace by a T_String Value node with a null string pointer. That's not okay, though; in particular outfuncs.c/readfuncs.c are not on board with such a representation, meaning you'll get a null pointer crash if you try to store a view or rule containing this construct. To fix, change the parsetree representation so that we have a NULL list element, instead of a bogus Value node. This isn't really a functional limitation since default XML namespaces aren't yet implemented in the executor; you'd just get "DEFAULT namespace is not supported" anyway. But crashes are not nice, so back-patch to v10 where this syntax was added. Ordinarily we'd consider a parsetree representation change to be un-backpatchable; but since existing releases would crash on the way to storing such constructs, there can't be any existing views/rules to be incompatible with. Per report from Andrey Lepikhov. Discussion: https://postgr.es/m/3690074f-abd2-56a9-144a-aa5545d7a291@postgrespro.ru	7 years ago
Tom Lane	ff4f889164	Fix bugs with degenerate window ORDER BY clauses in GROUPS/RANGE mode. ... nodeWindowAgg.c failed to cope with the possibility that no ordering columns are defined in the window frame for GROUPS mode or RANGE OFFSET mode, leading to assertion failures or odd errors, as reported by Masahiko Sawada and Lukas Eder. In RANGE OFFSET mode, an ordering column is really required, so add an Assert about that. In GROUPS mode, the code would work, except that the node initialization code wasn't in sync with the execution code about when to set up tuplestore read pointers and spare slots. Fix the latter for consistency's sake (even though I think the changes described below make the out-of-sync cases unreachable for now). Per SQL spec, a single ordering column is required for RANGE OFFSET mode, and at least one ordering column is required for GROUPS mode. The parser enforced the former but not the latter; add a check for that. We were able to reach the no-ordering-column cases even with fully spec compliant queries, though, because the planner would drop partitioning and ordering columns from the generated plan if they were redundant with earlier columns according to the redundant-pathkey logic, for instance "PARTITION BY x ORDER BY y" in the presence of a "WHERE x=y" qual. While in principle that's an optimization that could save some pointless comparisons at runtime, it seems unlikely to be meaningful in the real world. I think this behavior was not so much an intentional optimization as a side-effect of an ancient decision to construct the plan node's ordering-column info by reverse-engineering the PathKeys of the input path. If we give up redundant-column removal then it takes very little code to generate the plan node info directly from the WindowClause, ensuring that we have the expected number of ordering columns in all cases. (If anyone does complain about this, the planner could perhaps be taught to remove redundant columns only when it's safe to do so, ie *not* in RANGE OFFSET mode. But I doubt anyone ever will.) With these changes, the WindowAggPath.winpathkeys field is not used for anything anymore, so remove it. The test cases added here are not actually very interesting given the removal of the redundant-column-removal logic, but they would represent important corner cases if anyone ever tries to put that back. Tom Lane and Masahiko Sawada. Back-patch to v11 where RANGE OFFSET and GROUPS modes were added. Discussion: https://postgr.es/m/CAD21AoDrWqycq-w_+Bx1cjc+YUhZ11XTj9rfxNiNDojjBx8Fjw@mail.gmail.com Discussion: https://postgr.es/m/153086788677.17476.8002640580496698831@wrigleys.postgresql.org	7 years ago
Simon Riggs	08ea7a2291	Revert MERGE patch ... This reverts commits d204ef6377, 83454e3c2b and a few more commits thereafter (complete list at the end) related to MERGE feature. While the feature was fully functional, with sufficient test coverage and necessary documentation, it was felt that some parts of the executor and parse-analyzer can use a different design and it wasn't possible to do that in the available time. So it was decided to revert the patch for PG11 and retry again in the future. Thanks again to all reviewers and bug reporters. List of commits reverted, in reverse chronological order: f1464c5380 Improve parse representation for MERGE ddb4158579 MERGE syntax diagram correction 530e69e59b Allow cpluspluscheck to pass by renaming variable 01b88b4df5 MERGE minor errata 3af7b2b0d4 MERGE fix variable warning in non-assert builds a5d86181ec MERGE INSERT allows only one VALUES clause 4b2d44031f MERGE post-commit review 4923550c20 Tab completion for MERGE aa3faa3c7a WITH support in MERGE 83454e3c2b New files for MERGE d204ef6377 MERGE SQL Command following SQL:2016 Author: Pavan Deolasee Reviewed-by: Michael Paquier	8 years ago
Tom Lane	cefa387153	Merge catalog/pg_foo_fn.h headers back into pg_foo.h headers. ... Traditionally, include/catalog/pg_foo.h contains extern declarations for functions in backend/catalog/pg_foo.c, in addition to its function as the authoritative definition of the pg_foo catalog's rowtype. In some cases, we'd been forced to split out those extern declarations into separate pg_foo_fn.h headers so that the catalog definitions could be #include'd by frontend code. That problem is gone as of commit 9c0a0de4c, so let's undo the splits to make things less confusing. Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us	8 years ago
Simon Riggs	530e69e59b	Allow cpluspluscheck to pass by renaming variable ... Use of a C++ keyword as a function name caused problems Reported-by: Álvaro Herrera	8 years ago
Simon Riggs	d204ef6377	MERGE SQL Command following SQL:2016 ... MERGE performs actions that modify rows in the target table using a source table or query. MERGE provides a single SQL statement that can conditionally INSERT/UPDATE/DELETE rows a task that would other require multiple PL statements. e.g. MERGE INTO target AS t USING source AS s ON t.tid = s.sid WHEN MATCHED AND t.balance > s.delta THEN UPDATE SET balance = t.balance - s.delta WHEN MATCHED THEN DELETE WHEN NOT MATCHED AND s.delta > 0 THEN INSERT VALUES (s.sid, s.delta) WHEN NOT MATCHED THEN DO NOTHING; MERGE works with regular and partitioned tables, including column and row security enforcement, as well as support for row, statement and transition triggers. MERGE is optimized for OLTP and is parameterizable, though also useful for large scale ETL/ELT. MERGE is not intended to be used in preference to existing single SQL commands for INSERT, UPDATE or DELETE since there is some overhead. MERGE can be used statically from PL/pgSQL. MERGE does not yet support inheritance, write rules, RETURNING clauses, updatable views or foreign tables. MERGE follows SQL Standard per the most recent SQL:2016. Includes full tests and documentation, including full isolation tests to demonstrate the concurrent behavior. This version written from scratch in 2017 by Simon Riggs, using docs and tests originally written in 2009. Later work from Pavan Deolasee has been both complex and deep, leaving the lead author credit now in his hands. Extensive discussion of concurrency from Peter Geoghegan, with thanks for the time and effort contributed. Various issues reported via sqlsmith by Andreas Seltenreich Authors: Pavan Deolasee, Simon Riggs Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com	8 years ago
Simon Riggs	7cf8a5c302	Revert "Modified files for MERGE" ... This reverts commit 354f13855e.	8 years ago
Simon Riggs	354f13855e	Modified files for MERGE	8 years ago
Tom Lane	65b1d76785	Fix oversight in CALL argument handling, and do some minor cleanup. ... CALL statements cannot support sub-SELECTs in the arguments of the called procedure, since they just use ExecEvalExpr to evaluate such arguments. Teach transformSubLink() to reject the case, as it already does for other contexts in which subqueries are not supported. In passing, s/EXPR_KIND_CALL/EXPR_KIND_CALL_ARGUMENT/ to make that enum symbol line up more closely with the phrasing of the error messages it is associated with. And fix someone's weak grasp of English grammar in the preceding EXPR_KIND_PARTITION_EXPRESSION addition. Also update an incorrect comment in resolve_unique_index_expr (possibly it was correct when written, but nowadays transformExpr definitely does reject SRFs here). Per report from Pavel Stehule --- but this resolves only one of the bugs he mentions. Discussion: https://postgr.es/m/CAFj8pRDxOwPPzpA8i+AQeDQFj7bhVw-dR2==rfWZ3zMGkm568Q@mail.gmail.com	8 years ago
Tom Lane	0a459cec96	Support all SQL:2011 options for window frame clauses. ... This patch adds the ability to use "RANGE offset PRECEDING/FOLLOWING" frame boundaries in window functions. We'd punted on that back in the original patch to add window functions, because it was not clear how to do it in a reasonably data-type-extensible fashion. That problem is resolved here by adding the ability for btree operator classes to provide an "in_range" support function that defines how to add or subtract the RANGE offset value. Factoring it this way also allows the operator class to avoid overflow problems near the ends of the datatype's range, if it wishes to expend effort on that. (In the committed patch, the integer opclasses handle that issue, but it did not seem worth the trouble to avoid overflow failures for datetime types.) The patch includes in_range support for the integer_ops opfamily (int2/int4/int8) as well as the standard datetime types. Support for other numeric types has been requested, but that seems like suitable material for a follow-on patch. In addition, the patch adds GROUPS mode which counts the offset in ORDER-BY peer groups rather than rows, and it adds the frame_exclusion options specified by SQL:2011. As far as I can see, we are now fully up to spec on window framing options. Existing behaviors remain unchanged, except that I changed the errcode for a couple of existing error reports to meet the SQL spec's expectation that negative "offset" values should be reported as SQLSTATE 22013. Internally and in relevant parts of the documentation, we now consistently use the terminology "offset PRECEDING/FOLLOWING" rather than "value PRECEDING/FOLLOWING", since the term "value" is confusingly vague. Oliver Ford, reviewed and whacked around some by me Discussion: https://postgr.es/m/CAGMVOdu9sivPAxbNN0X+q19Sfv9edEPv=HibOJhB14TJv_RCQg@mail.gmail.com	8 years ago
Tom Lane	fb8697b31a	Avoid unnecessary use of pg_strcasecmp for already-downcased identifiers. ... We have a lot of code in which option names, which from the user's viewpoint are logically keywords, are passed through the grammar as plain identifiers, and then matched to string literals during command execution. This approach avoids making words into lexer keywords unnecessarily. Some places matched these strings using plain strcmp, some using pg_strcasecmp. But the latter should be unnecessary since identifiers would have been downcased on their way through the parser. Aside from any efficiency concerns (probably not a big factor), the lack of consistency in this area creates a hazard of subtle bugs due to different places coming to different conclusions about whether two option names are the same or different. Hence, standardize on using strcmp() to match any option names that are expected to have been fed through the parser. This does create a user-visible behavioral change, which is that while formerly all of these would work: alter table foo set (fillfactor = 50); alter table foo set (FillFactor = 50); alter table foo set ("fillfactor" = 50); alter table foo set ("FillFactor" = 50); now the last case will fail because that double-quoted identifier is different from the others. However, none of our documentation says that you can use a quoted identifier in such contexts at all, and we should discourage doing so since it would break if we ever decide to parse such constructs as true lexer keywords rather than poor man's substitutes. So this shouldn't create a significant compatibility issue for users. Daniel Gustafsson, reviewed by Michael Paquier, small changes by me Discussion: https://postgr.es/m/29405B24-564E-476B-98C0-677A29805B84@yesql.se	8 years ago
Bruce Momjian	9d4649ca49	Update copyright for 2018 ... Backpatch-through: certain files through 9.3	8 years ago
Peter Eisentraut	2eb4a831e5	Change TRUE/FALSE to true/false ... The lower case spellings are C and C++ standard and are used in most parts of the PostgreSQL sources. The upper case spellings are only used in some files/modules. So standardize on the standard spellings. The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so those are left as is when using those APIs. In code comments, we use the lower-case spelling for the C concepts and keep the upper-case spelling for the SQL concepts. Reviewed-by: Michael Paquier <michael.paquier@gmail.com>	8 years ago
Dean Rasheed	87b2ebd352	Always require SELECT permission for ON CONFLICT DO UPDATE. ... The update path of an INSERT ... ON CONFLICT DO UPDATE requires SELECT permission on the columns of the arbiter index, but it failed to check for that in the case of an arbiter specified by constraint name. In addition, for a table with row level security enabled, it failed to check updated rows against the table's SELECT policies when the update path was taken (regardless of how the arbiter index was specified). Backpatch to 9.5 where ON CONFLICT DO UPDATE and RLS were introduced. Security: CVE-2017-15099	8 years ago
Tom Lane	7421f4b89a	Fix incorrect handling of CTEs and ENRs as DML target relations. ... setTargetTable threw an error if the proposed target RangeVar's relname matched any visible CTE or ENR. This breaks backwards compatibility in the CTE case, since pre-v10 we never looked for a CTE here at all, so that CTE names did not mask regular tables. It does seem like a good idea to throw an error for the ENR case, though, thus causing ENRs to mask tables for this purpose; ENRs are new in v10 so we're not breaking existing code, and we may someday want to allow them to be the targets of DML. To fix that, replace use of getRTEForSpecialRelationTypes, which was overkill anyway, with use of scanNameSpaceForENR. A second problem was that the check neglected to verify null schemaname, so that a CTE or ENR could incorrectly be thought to match a qualified RangeVar. That happened because getRTEForSpecialRelationTypes relied on its caller to have checked for null schemaname. Even though the one remaining caller got it right, this is obviously bug-prone, so move the check inside getRTEForSpecialRelationTypes. Also, revert commit 18ce3a4ab's extremely poorly thought out decision to add a NULL return case to parserOpenTable --- without either documenting that or adjusting any of the callers to check for it. The current bug seems to have arisen in part due to working around that bad idea. In passing, remove the one-line shim functions transformCTEReference and transformENRReference --- they don't seem to be adding any clarity or functionality. Per report from Hugo Mercier (via Julien Rouhaud). Back-patch to v10 where the bug was introduced. Thomas Munro, with minor editing by me Discussion: https://postgr.es/m/CAOBaU_YdPVH+PTtiKSSLOiiW3mVDYsnNUekK+XPbHXiP=wrFLA@mail.gmail.com	8 years ago
Tom Lane	382ceffdf7	Phase 3 of pgindent updates. ... Don't move parenthesized lines to the left, even if that means they flow past the right margin. By default, BSD indent lines up statement continuation lines that are within parentheses so that they start just to the right of the preceding left parenthesis. However, traditionally, if that resulted in the continuation line extending to the right of the desired right margin, then indent would push it left just far enough to not overrun the margin, if it could do so without making the continuation line start to the left of the current statement indent. That makes for a weird mix of indentations unless one has been completely rigid about never violating the 80-column limit. This behavior has been pretty universally panned by Postgres developers. Hence, disable it with indent's new -lpl switch, so that parenthesized lines are always lined up with the preceding left paren. This patch is much less interesting than the first round of indent changes, but also bulkier, so I thought it best to separate the effects. Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us	8 years ago
Tom Lane	c7b8998ebb	Phase 2 of pgindent updates. ... Change pg_bsd_indent to follow upstream rules for placement of comments to the right of code, and remove pgindent hack that caused comments following #endif to not obey the general rule. Commit e3860ffa4d wasn't actually using the published version of pg_bsd_indent, but a hacked-up version that tried to minimize the amount of movement of comments to the right of code. The situation of interest is where such a comment has to be moved to the right of its default placement at column 33 because there's code there. BSD indent has always moved right in units of tab stops in such cases --- but in the previous incarnation, indent was working in 8-space tab stops, while now it knows we use 4-space tabs. So the net result is that in about half the cases, such comments are placed one tab stop left of before. This is better all around: it leaves more room on the line for comment text, and it means that in such cases the comment uniformly starts at the next 4-space tab stop after the code, rather than sometimes one and sometimes two tabs after. Also, ensure that comments following #endif are indented the same as comments following other preprocessor commands such as #else. That inconsistency turns out to have been self-inflicted damage from a poorly-thought-through post-indent "fixup" in pgindent. This patch is much less interesting than the first round of indent changes, but also bulkier, so I thought it best to separate the effects. Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us	8 years ago
Tom Lane	0436f6bde8	Disallow set-returning functions inside CASE or COALESCE. ... When we reimplemented SRFs in commit 69f4b9c85, our initial choice was to allow the behavior to vary from historical practice in cases where a SRF call appeared within a conditional-execution construct (currently, only CASE or COALESCE). But that was controversial to begin with, and subsequent discussion has resulted in a consensus that it's better to throw an error instead of executing the query differently from before, so long as we can provide a reasonably clear error message and a way to rewrite the query. Hence, add a parser mechanism to allow detection of such cases during parse analysis. The mechanism just requires storing, in the ParseState, a pointer to the set-returning FuncExpr or OpExpr most recently emitted by parse analysis. Then the parsing functions for CASE and COALESCE can detect the presence of a SRF in their arguments by noting whether this pointer changes while analyzing their arguments. Furthermore, if it does, it provides a suitable error cursor location for the complaint. (This means that if there's more than one SRF in the arguments, the error will point at the last one to be analyzed not the first. While connoisseurs of parsing behavior might find that odd, it's unlikely the average user would ever notice.) While at it, we can also provide more specific error messages than before about some pre-existing restrictions, such as no-SRFs-within-aggregates. Also, reject at parse time cases where a NULLIF or IS DISTINCT FROM construct would need to return a set. We've never supported that, but the restriction is depended on in more subtle ways now, so it seems wise to detect it at the start. Also, provide some documentation about how to rewrite a SRF-within-CASE query using a custom wrapper SRF. It turns out that the information_schema.user_mapping_options view contained an instance of exactly the behavior we're now forbidding; but rewriting it makes it more clear and safer too. initdb forced because of user_mapping_options change. Patch by me, with error message suggestions from Alvaro Herrera and Andres Freund, pursuant to a complaint from Regina Obe. Discussion: https://postgr.es/m/000001d2d5de$d8d66170$8a832450$@pcorp.us	8 years ago
Bruce Momjian	a6fd7b7a5f	Post-PG 10 beta1 pgindent run ... perltidy run not included.	8 years ago
Kevin Grittner	18ce3a4ab2	Add infrastructure to support EphemeralNamedRelation references. ... A QueryEnvironment concept is added, which allows new types of objects to be passed into queries from parsing on through execution. At this point, the only thing implemented is a collection of EphemeralNamedRelation objects -- relations which can be referenced by name in queries, but do not exist in the catalogs. The only type of ENR implemented is NamedTuplestore, but provision is made to add more types fairly easily. An ENR can carry its own TupleDesc or reference a relation in the catalogs by relid. Although these features can be used without SPI, convenience functions are added to SPI so that ENRs can easily be used by code run through SPI. The initial use of all this is going to be transition tables in AFTER triggers, but that will be added to each PL as a separate commit. An incidental effect of this patch is to produce a more informative error message if an attempt is made to modify the contents of a CTE from a referencing DML statement. No tests previously covered that possibility, so one is added. Kevin Grittner and Thomas Munro Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro with valuable comments and suggestions from many others	9 years ago
Peter Eisentraut	4cb824699e	Cast result of copyObject() to correct type ... copyObject() is declared to return void *, which allows easily assigning the result independent of the input, but it loses all type checking. If the compiler supports typeof or something similar, cast the result to the input type. This creates a greater amount of type safety. In some cases, where the result is assigned to a generic type such as Node * or Expr *, new casts are now necessary, but in general casts are now unnecessary in the normal case and indicate that something unusual is happening. Reviewed-by: Mark Dilger <hornschnorter@gmail.com>	9 years ago
Alvaro Herrera	fcec6caafa	Support XMLTABLE query expression ... XMLTABLE is defined by the SQL/XML standard as a feature that allows turning XML-formatted data into relational form, so that it can be used as a <table primary> in the FROM clause of a query. This new construct provides significant simplicity and performance benefit for XML data processing; what in a client-side custom implementation was reported to take 20 minutes can be executed in 400ms using XMLTABLE. (The same functionality was said to take 10 seconds using nested PostgreSQL XPath function calls, and 5 seconds using XMLReader under PL/Python). The implemented syntax deviates slightly from what the standard requires. First, the standard indicates that the PASSING clause is optional and that multiple XML input documents may be given to it; we make it mandatory and accept a single document only. Second, we don't currently support a default namespace to be specified. This implementation relies on a new executor node based on a hardcoded method table. (Because the grammar is fixed, there is no extensibility in the current approach; further constructs can be implemented on top of this such as JSON_TABLE, but they require changes to core code.) Author: Pavel Stehule, Álvaro Herrera Extensively reviewed by: Craig Ringer Discussion: https://postgr.es/m/CAFj8pRAgfzMD-LoSmnMGybD0WsEznLHWap8DO79+-GTRAPR4qA@mail.gmail.com	9 years ago
Robert Haas	5dbdb2f799	Make tablesample work with partitioned tables. ... This was an oversight in the original partitioning commit. Amit Langote, reviewed by David Fetter Discussion: http://postgr.es/m/59af6590-8ace-04c4-c36c-ea35d435c60e@lab.ntt.co.jp	9 years ago
Peter Eisentraut	38d103763d	Make more use of castNode()	9 years ago
Tom Lane	aebeb4790c	Remove vestigial resolveUnknown arguments from transformSortClause etc. ... There's really no situation where we don't want these unknown-to-text conversions to happen. The alternative is failure anyway, and the one caller that was passing "false" did so only because it expected the case could not arise. Might as well simplify the code. Discussion: https://postgr.es/m/CAH2L28uwwbL9HUM-WR=hromW1Cvamkn7O-g8fPY2m=_7muJ0oA@mail.gmail.com	9 years ago
Tom Lane	1e7c4bb004	Change unknown-type literals to type text in SELECT and RETURNING lists. ... Previously, we left such literals alone if the query or subquery had no properties forcing a type decision to be made (such as an ORDER BY or DISTINCT clause using that output column). This meant that "unknown" could be an exposed output column type, which has never been a great idea because it could result in strange failures later on. For example, an outer query that tried to do any operations on an unknown-type subquery output would generally fail with some weird error like "failed to find conversion function from unknown to text" or "could not determine which collation to use for string comparison". Also, if the case occurred in a CREATE VIEW's query then the view would have an unknown-type column, causing similar failures in queries trying to use the view. To fix, at the tail end of parse analysis of a query, forcibly convert any remaining "unknown" literals in its SELECT or RETURNING list to type text. However, provide a switch to suppress that, and use it in the cases of SELECT inside a set operation or INSERT command. In those cases we already had type resolution rules that make use of context information from outside the subquery proper, and we don't want to change that behavior. Also, change creation of an unknown-type column in a relation from a warning to a hard error. The error should be unreachable now in CREATE VIEW or CREATE MATVIEW, but it's still possible to explicitly say "unknown" in CREATE TABLE or CREATE (composite) TYPE. We want to forbid that because it's nothing but a foot-gun. This change creates a pg_upgrade failure case: a matview that contains an unknown-type column can't be pg_upgraded, because reparsing the matview's defining query will now decide that the column is of type text, which doesn't match the cstring-like storage that the old materialized column would actually have. Add a checking pass to detect that. While at it, we can detect tables or composite types that would fail, essentially for free. Those would fail safely anyway later on, but we might as well fail earlier. This patch is by me, but it owes something to previous investigations by Rahila Syed. Also thanks to Ashutosh Bapat and Michael Paquier for review. Discussion: https://postgr.es/m/CAH2L28uwwbL9HUM-WR=hromW1Cvamkn7O-g8fPY2m=_7muJ0oA@mail.gmail.com	9 years ago
Tom Lane	ab1f0c8225	Change representation of statement lists, and add statement location info. ... This patch makes several changes that improve the consistency of representation of lists of statements. It's always been the case that the output of parse analysis is a list of Query nodes, whatever the types of the individual statements in the list. This patch brings similar consistency to the outputs of raw parsing and planning steps: * The output of raw parsing is now always a list of RawStmt nodes; the statement-type-dependent nodes are one level down from that. * The output of pg_plan_queries() is now always a list of PlannedStmt nodes, even for utility statements. In the case of a utility statement, "planning" just consists of wrapping a CMD_UTILITY PlannedStmt around the utility node. This list representation is now used in Portal and CachedPlan plan lists, replacing the former convention of intermixing PlannedStmts with bare utility-statement nodes. Now, every list of statements has a consistent head-node type depending on how far along it is in processing. This allows changing many places that formerly used generic "Node *" pointers to use a more specific pointer type, thus reducing the number of IsA() tests and casts needed, as well as improving code clarity. Also, the post-parse-analysis representation of DECLARE CURSOR is changed so that it looks more like EXPLAIN, PREPARE, etc. That is, the contained SELECT remains a child of the DeclareCursorStmt rather than getting flipped around to be the other way. It's now true for both Query and PlannedStmt that utilityStmt is non-null if and only if commandType is CMD_UTILITY. That allows simplifying a lot of places that were testing both fields. (I think some of those were just defensive programming, but in many places, it was actually necessary to avoid confusing DECLARE CURSOR with SELECT.) Because PlannedStmt carries a canSetTag field, we're also able to get rid of some ad-hoc rules about how to reconstruct canSetTag for a bare utility statement; specifically, the assumption that a utility is canSetTag if and only if it's the only one in its list. While I see no near-term need for relaxing that restriction, it's nice to get rid of the ad-hocery. The API of ProcessUtility() is changed so that what it's passed is the wrapper PlannedStmt not just the bare utility statement. This will affect all users of ProcessUtility_hook, but the changes are pretty trivial; see the affected contrib modules for examples of the minimum change needed. (Most compilers should give pointer-type-mismatch warnings for uncorrected code.) There's also a change in the API of ExplainOneQuery_hook, to pass through cursorOptions instead of expecting hook functions to know what to pick. This is needed because of the DECLARE CURSOR changes, but really should have been done in 9.6; it's unlikely that any extant hook functions know about using CURSOR_OPT_PARALLEL_OK. Finally, teach gram.y to save statement boundary locations in RawStmt nodes, and pass those through to Query and PlannedStmt nodes. This allows more intelligent handling of cases where a source query string contains multiple statements. This patch doesn't actually do anything with the information, but a follow-on patch will. (Passing this information through cleanly is the true motivation for these changes; while I think this is all good cleanup, it's unlikely we'd have bothered without this end goal.) catversion bump because addition of location fields to struct Query affects stored rules. This patch is by me, but it owes a good deal to Fabien Coelho who did a lot of preliminary work on the problem, and also reviewed the patch. Discussion: https://postgr.es/m/alpine.DEB.2.20.1612200926310.29821@lancre	9 years ago
Bruce Momjian	1d25779284	Update copyright via script for 2017	9 years ago
Tom Lane	fe591f8bf6	Replace enum InhOption with simple boolean. ... Now that it has only INH_NO and INH_YES values, it's just weird that it's not a plain bool, so make it that way. Also rename RangeVar.inhOpt to "inh", to be like RangeTblEntry.inh. My recollection is that we gave it a different name specifically because it had a different representation than the derived bool value, but it no longer does. And this is a good forcing function to be sure we catch any places that are affected by the change. Bump catversion because of possible effect on stored RangeVar nodes. I'm not exactly convinced that we ever store RangeVar on disk, but we have a readfuncs function for it, so be cautious. (If we do do so, then commit e13486eba was in error not to bump catversion.) Follow-on to commit e13486eba. Discussion: http://postgr.es/m/CA+TgmoYe+EG7LdYX6pkcNxr4ygkP4+A=jm9o-CPXyOvRiCNwaQ@mail.gmail.com	9 years ago
Robert Haas	e13486eba0	Remove sql_inheritance GUC. ... This backward-compatibility GUC is long overdue for removal. Discussion: http://postgr.es/m/CA+TgmoYe+EG7LdYX6pkcNxr4ygkP4+A=jm9o-CPXyOvRiCNwaQ@mail.gmail.com	9 years ago
Tom Lane	de94e2af18	Run pgindent on a batch of (mostly-planner-related) source files. ... Getting annoyed at the amount of unrelated chatter I get from pgindent'ing Rowley's unique-joins patch. Re-indent all the files it touches.	10 years ago
Alvaro Herrera	f402b99501	Type names should not be quoted ... Our actual convention, contrary to what I said in 59a2111b23, is not to quote type names, as evidenced by unquoted use of format_type_be() result value in error messages. Remove quotes from recently tweaked messages accordingly. Per note from Tom Lane	10 years ago
Alvaro Herrera	59a2111b23	Improve internationalization of messages involving type names ... Change the slightly different variations of the message function FOO must return type BAR to a single wording, removing the variability in type name so that they all create a single translation entry; since the type name is not to be translated, there's no point in it being part of the message anyway. Also, change them all to use the same quoting convention, namely that the function name is not to be quoted but the type name is. (I'm not quite sure why this is so, but it's the clear majority.) Some similar messages such as "encoding conversion function FOO must ..." are also changed.	10 years ago
Tom Lane	364a9f47ab	Refactor pull_var_clause's API to make it less tedious to extend. ... In commit 1d97c19a0f and later c1d9579dd8, we extended pull_var_clause's API by adding enum-type arguments. That's sort of a pain to maintain, though, because it means every time we add a new behavior we must touch every last one of the call sites, even if there's a reasonable default behavior that most of them could use. Let's switch over to using a bitmask of flags, instead; that seems more maintainable and might save a nanosecond or two as well. This commit changes no behavior in itself, though I'm going to follow it up with one that does add a new behavior. In passing, remove flatten_tlist(), which has not been used since 9.1 and would otherwise need the same API changes. Removing these enums means that optimizer/tlist.h no longer needs to depend on optimizer/var.h. Changing that caused a number of C files to need addition of #include "optimizer/var.h" (probably we can thank old runs of pgrminclude for that); but on balance it seems like a good change anyway.	10 years ago
Tom Lane	72eee410d4	Move pg_constraint.h function declarations to new file pg_constraint_fn.h. ... A pending patch requires exporting a function returning Bitmapset from catalog/pg_constraint.c. As things stand, that would mean including nodes/bitmapset.h in pg_constraint.h, which might be hazardous for the client-side includability of that header. It's not entirely clear whether any client-side code needs to include pg_constraint.h, but it seems prudent to assume that there is some such code somewhere. Therefore, split off the function definitions into a new file pg_constraint_fn.h, similarly to what we've done for some other catalog header files.	10 years ago
Tom Lane	65c5fcd353	Restructure index access method API to hide most of it at the C level. ... This patch reduces pg_am to just two columns, a name and a handler function. All the data formerly obtained from pg_am is now provided in a C struct returned by the handler function. This is similar to the designs we've adopted for FDWs and tablesample methods. There are multiple advantages. For one, the index AM's support functions are now simple C functions, making them faster to call and much less error-prone, since the C compiler can now check function signatures. For another, this will make it far more practical to define index access methods in installable extensions. A disadvantage is that SQL-level code can no longer see attributes of index AMs; in particular, some of the crosschecks in the opr_sanity regression test are no longer possible from SQL. We've addressed that by adding a facility for the index AM to perform such checks instead. (Much more could be done in that line, but for now we're content if the amvalidate functions more or less replace what opr_sanity used to do.) We might also want to expose some sort of reporting functionality, but this patch doesn't do that. Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily editorialized on by me.	10 years ago
Bruce Momjian	ee94300446	Update copyright for 2016 ... Backpatch certain files through 9.1	10 years ago
Peter Eisentraut	5db837d3f2	Message improvements	10 years ago
Peter Eisentraut	a8d585c091	Message style improvements ... Message style, plurals, quoting, spelling, consistency with similar messages	10 years ago
Andres Freund	faab14ecb8	Fix flattening of nested grouping sets. ... Previously nested grouping set specifications accidentally weren't flattened, but instead contained the nested specification as a element in the outer list. Fix this by, as actually documented in comments, concatenating the nested set specification into the outer one. Also add tests to prevent this from breaking again. Author: Andrew Gierth, with tests from Jeevan Chalke Reported-By: Jeevan Chalke Discussion: CAM2+6=V5YvuxB+EyN4iH=GbD-XTA435TCNvnDFSD--YvXs+pww@mail.gmail.com Backpatch: 9.5, where grouping sets were introduced	10 years ago
Tom Lane	dd7a8f66ed	Redesign tablesample method API, and do extensive code review. ... The original implementation of TABLESAMPLE modeled the tablesample method API on index access methods, which wasn't a good choice because, without specialized DDL commands, there's no way to build an extension that can implement a TSM. (Raw inserts into system catalogs are not an acceptable thing to do, because we can't undo them during DROP EXTENSION, nor will pg_upgrade behave sanely.) Instead adopt an API more like procedural language handlers or foreign data wrappers, wherein the only SQL-level support object needed is a single handler function identified by having a special return type. This lets us get rid of the supporting catalog altogether, so that no custom DDL support is needed for the feature. Adjust the API so that it can support non-constant tablesample arguments (the original coding assumed we could evaluate the argument expressions at ExecInitSampleScan time, which is undesirable even if it weren't outright unsafe), and discourage sampling methods from looking at invisible tuples. Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable within and across queries, as required by the SQL standard, and deal more honestly with methods that can't support that requirement. Make a full code-review pass over the tablesample additions, and fix assorted bugs, omissions, infelicities, and cosmetic issues (such as failure to put the added code stanzas in a consistent ordering). Improve EXPLAIN's output of tablesample plans, too. Back-patch to 9.5 so that we don't have to support the original API in production.	10 years ago
Bruce Momjian	807b9e0dff	pgindent run for 9.5	10 years ago
Andres Freund	9bc77c4519	Various fixes around ON CONFLICT for rule deparsing. ... Neither the deparsing of the new alias for INSERT's target table, nor of the inference clause was supported. Also fixup a typo in an error message. Add regression tests to test those code paths. Author: Peter Geoghegan	10 years ago
Andres Freund	0740cbd759	Refactor ON CONFLICT index inference parse tree representation. ... Defer lookup of opfamily and input type of a of a user specified opclass until the optimizer selects among available unique indexes; and store the opclass in the parse analyzed tree instead. The primary reason for doing this is that for rule deparsing it's easier to use the opclass than the previous representation. While at it also rename a variable in the inference code to better fit it's purpose. This is separate from the actual fixes for deparsing to make review easier.	10 years ago
Andres Freund	f3d3118532	Support GROUPING SETS, CUBE and ROLLUP. ... This SQL standard functionality allows to aggregate data by different GROUP BY clauses at once. Each grouping set returns rows with columns grouped by in other sets set to NULL. This could previously be achieved by doing each grouping as a separate query, conjoined by UNION ALLs. Besides being considerably more concise, grouping sets will in many cases be faster, requiring only one scan over the underlying data. The current implementation of grouping sets only supports using sorting for input. Individual sets that share a sort order are computed in one pass. If there are sets that don't share a sort order, additional sort & aggregation steps are performed. These additional passes are sourced by the previous sort step; thus avoiding repeated scans of the source data. The code is structured in a way that adding support for purely using hash aggregation or a mix of hashing and sorting is possible. Sorting was chosen to be supported first, as it is the most generic method of implementation. Instead of, as in an earlier versions of the patch, representing the chain of sort and aggregation steps as full blown planner and executor nodes, all but the first sort are performed inside the aggregation node itself. This avoids the need to do some unusual gymnastics to handle having to return aggregated and non-aggregated tuples from underlying nodes, as well as having to shut down underlying nodes early to limit memory usage. The optimizer still builds Sort/Agg node to describe each phase, but they're not part of the plan tree, but instead additional data for the aggregation node. They're a convenient and preexisting way to describe aggregation and sorting. The first (and possibly only) sort step is still performed as a separate execution step. That retains similarity with existing group by plans, makes rescans fairly simple, avoids very deep plans (leading to slow explains) and easily allows to avoid the sorting step if the underlying data is sorted by other means. A somewhat ugly side of this patch is having to deal with a grammar ambiguity between the new CUBE keyword and the cube extension/functions named cube (and rollup). To avoid breaking existing deployments of the cube extension it has not been renamed, neither has cube been made a reserved keyword. Instead precedence hacking is used to make GROUP BY cube(..) refer to the CUBE grouping sets feature, and not the function cube(). To actually group by a function cube(), unlikely as that might be, the function name has to be quoted. Needs a catversion bump because stored rules may change. Author: Andrew Gierth and Atri Sharma, with contributions from Andres Freund Reviewed-By: Andres Freund, Noah Misch, Tom Lane, Svenne Krap, Tomas Vondra, Erik Rijkers, Marti Raudsepp, Pavel Stehule Discussion: CAOeZVidmVRe2jU6aMk_5qkxnB7dfmPROzM7Ur8JPW5j8Y5X-Lw@mail.gmail.com	10 years ago