With OpenLDAP versions 2.4.24 through 2.4.31, inclusive, PostgreSQL
backends can crash at exit. Raise a warning during "configure" based on
the compile-time OpenLDAP version number, and test the crash scenario in
the dblink test suite. Back-patch to 9.0 (all supported versions).
In commit 631dc390f4, we started to handle
simple numeric timezone offsets via the zic library instead of the old
CTimeZone/HasCTZSet kluge. However, we overlooked the fact that the zic
code will reject UTC offsets exceeding a week (which seems a bit arbitrary,
but not because it's too tight ...). This led to possibly setting
session_timezone to NULL, which results in crashes in most timezone-related
operations as of 9.4, and crashes in a small number of places even before
that. So check for NULL return from pg_tzset_offset() and report an
appropriate error message. Per bug #11014 from Duncan Gillis.
Back-patch to all supported branches, like the previous patch.
(Unfortunately, as of today that no longer includes 8.4.)
~/.pgpass is a sound choice everywhere, and "peer" authentication is
safe on every platform it supports. Cease to recommend "trust"
authentication, the safety of which is deeply configuration-specific.
Back-patch to 9.0, where pg_upgrade was introduced.
If pg_regcomp failed after having invoked markst/cleanst, it would leak any
"struct subre" nodes it had created. (We've already detected all regex
syntax errors at that point, so the only likely causes of later failure
would be query cancel or out-of-memory.) To fix, make sure freesrnode
knows the difference between the pre-cleanst and post-cleanst cleanup
procedures. Add some documentation of this less-than-obvious point.
Also, newlacon did the wrong thing with an out-of-memory failure from
realloc(), so that the previously allocated array would be leaked.
Both of these are pretty low-probability scenarios, but a bug is a bug,
so patch all the way back.
Per bug #10976 from Arthur O'Dwyer.
Trying to reassign objects owned by a user that had text search
dictionaries or configurations used to fail with:
ERROR: unexpected classid 3600
or
ERROR: unexpected classid 3602
Fix by adding cases for those object types in a switch in pg_shdepend.c.
Both REASSIGN OWNED and text search objects go back all the way to 8.1,
so backpatch to all supported branches. In 9.3 the alter-owner code was
made generic, so the required change in recent branches is pretty
simple; however, for 9.2 and older ones we need some additional
reshuffling to enable specifying objects by OID rather than name.
Text search templates and parsers are not owned objects, so there's no
change required for them.
Per bug #9749 reported by Michal Novotný
ExecEvalWholeRowVar incorrectly supposed that it could "bless" the source
TupleTableSlot just once per query. But if the input is coming from an
Append (or, perhaps, other cases?) more than one slot might be returned
over the query run. This led to "record type has not been registered"
errors when a composite datum was extracted from a non-blessed slot.
This bug has been there a long time; I guess it escaped notice because when
dealing with subqueries the planner tends to expand whole-row Vars into
RowExprs, which don't have the same problem. It is possible to trigger
the problem in all active branches, though, as illustrated by the added
regression test.
While the x output of "select x from t group by x" can be presumed unique,
this does not hold for "select x, generate_series(1,10) from t group by x",
because we may expand the set-returning function after the grouping step.
(Perhaps that should be re-thought; but considering all the other oddities
involved with SRFs in targetlists, it seems unlikely we'll change it.)
Put a check in query_is_distinct_for() so it's not fooled by such cases.
Back-patch to all supported branches.
David Rowley
This function wasn't originally thought to be really user-facing,
because converting a table to a view isn't something we expect people
to do manually. So not all that much effort was spent on the error
messages; in particular, while the code will complain that you got
the column types wrong it won't say exactly what they are. But since
we repurposed the code to also check compatibility of rule RETURNING
lists, it's definitely user-facing. It now seems worthwhile to add
errdetail messages showing exactly what the conflict is when there's
a mismatch of column names or types. This is prompted by bug #10836
from Matthias Raffelsieper, which might have been forestalled if the
error message had reported the wrong column type as being "record".
Per Alvaro's advice, back-patch to branches before 9.4, but resist
the temptation to rephrase any existing strings there. Adding new
strings is not really a translation degradation; anyway having the
info presented in English is better than not having it at all.
The output buffer size in unaccent_lexize() was calculated as input string
length times pg_database_encoding_max_length(), which effectively assumes
that replacement strings aren't more than one character. While that was
all that we previously documented it to support, the code actually has
always allowed replacement strings of arbitrary length; so if you tried
to make use of longer strings, you were at risk of buffer overrun. To fix,
use an expansible StringInfo buffer instead of trying to determine the
maximum space needed a-priori.
This would be a security issue if unaccent rules files could be installed
by unprivileged users; but fortunately they can't, so in the back branches
the problem can be labeled as improper configuration by a superuser.
Nonetheless, a memory stomp isn't a nice way of reacting to improper
configuration, so let's back-patch the fix.
When we committed a87c729153, we somehow
failed to notice that it didn't merely improve plan quality for expression
indexes; there were very closely related cases that failed outright with
"could not find pathkey item to sort". The failing cases seem to be those
where the planner was already capable of selecting a MergeAppend plan,
and there was inheritance involved: the lack of appropriate eclass child
members would prevent prepare_sort_from_pathkeys() from succeeding on the
MergeAppend's child plan nodes for inheritance child tables.
Accordingly, back-patch into 9.1 through 9.3, along with an extra
regression test case covering the problem.
Per trouble report from Michael Glaesemann.
7380b63 changed log_filename so that epoch was not appended to it
when no format specifier is given. But the example of CSV log file name
with epoch still left in log_filename document. This commit removes
such obsolete example.
This commit also documents the defaults of log_directory and
log_filename.
Backpatch to all supported versions.
Christoph Berg
The syntax doesn't let you specify "WITH OIDS" for foreign tables, but it
was still possible with default_with_oids=true. But the rest of the system,
including pg_dump, isn't prepared to handle foreign tables with OIDs
properly.
Backpatch down to 9.1, where foreign tables were introduced. It's possible
that there are databases out there that already have foreign tables with
OIDs. There isn't much we can do about that, but at least we can prevent
them from being created in the future.
Patch by Etsuro Fujita, reviewed by Hadi Moshayedi.
By using curly braces, the template had specified that one of
"NOT DEFERRABLE", "INITIALLY IMMEDIATE", or "INITIALLY DEFERRED"
was required on any CREATE TRIGGER statement, which is not
accurate. Change to square brackets makes that optional.
Backpatch to 9.1, where the error was introduced.
ExecMakeTableFunctionResult evaluated the arguments for a function-in-FROM
in the query-lifespan memory context. This is insignificant in simple
cases where the function relation is scanned only once; but if the function
is in a sub-SELECT or is on the inside of a nested loop, any memory
consumed during argument evaluation can add up quickly. (The potential for
trouble here had been foreseen long ago, per existing comments; but we'd
not previously seen a complaint from the field about it.) To fix, create
an additional temporary context just for this purpose.
Per an example from MauMau. Back-patch to all active branches.
Commit 453a5d91d4 made it available to the
src/test/regress build of pg_regress, but all pg_regress builds need the
same treatment. Patch 9.2 through 8.4; in 9.3 and later, pg_regress
gets pqsignal() via libpgport.
Any OS user able to access the socket can connect as the bootstrap
superuser and proceed to execute arbitrary code as the OS user running
the test. Protect against that by placing the socket in a temporary,
mode-0700 subdirectory of /tmp. The pg_regress-based test suites and
the pg_upgrade test suite were vulnerable; the $(prove_check)-based test
suites were already secure. Back-patch to 8.4 (all supported versions).
The hazard remains wherever the temporary cluster accepts TCP
connections, notably on Windows.
As a convenient side effect, this lets testing proceed smoothly in
builds that override DEFAULT_PGSOCKET_DIR. Popular non-default values
like /var/run/postgresql are often unwritable to the build user.
Security: CVE-2014-0067
This function is pervasive on free software operating systems; import
NetBSD's implementation. Back-patch to 8.4, like the commit that will
harness it.
Prior to 9.0, pg_dump handled comments on large objects by dumping a bunch
of COMMENT commands into a single BLOB COMMENTS archive object. With
sufficiently many such comments, some of the commands would likely get
split across bufferloads when restoring, causing failures in
direct-to-database restores (though no problem would be evident in text
output). This is the same type of issue we have with table data dumped as
INSERT commands, and it can be fixed in the same way, by using a mini SQL
lexer to figure out where the command boundaries are. Fortunately, the
COMMENT commands are no more complex to lex than INSERTs, so we can just
re-use the existing lexer for INSERTs.
Per bug #10611 from Jacek Zalewski. Back-patch to all active branches.
Robert Frost is no longer with us, but his copyrights still are, so
let's stop using "Stopping by Woods on a Snowy Evening" as test data
before somebody decides to sue us. Wordsworth is more safely dead.
When we grabbed this file off the Snowball project's website, we mistakenly
supposed that it was in LATIN1 encoding, but evidently it was actually in
LATIN2. This resulted in ő (o-double-acute, U+0151, which is code 0xF5 in
LATIN2) being misconverted into õ (o-tilde, U+00F5), as complained of in
bug #10589 from Zoltán Sörös. We'd have messed up u-double-acute too,
but there aren't any of those in the file. Other characters used in the
file have the same codes in LATIN1 and LATIN2, which no doubt helped hide
the problem for so long.
The error is not only ours: the Snowball project also was confused about
which encoding is required for Hungarian. But dealing with that will
require source-code changes that I'm not at all sure we'll wish to
back-patch. Fixing the stopword file seems reasonably safe to back-patch
however.
This commit changes HS regression test so that it uses
REPEATABLE READ transaction instead of SERIALIZABLE one
because SERIALIZABLE transaction isolation level is not
available in HS. Also this commit fixes VACUUM/ANALYZE
label mixup.
This was fixed in HEAD (commit 2985e16), but it should
have been back-patched to 9.1 which had introduced SSI
and forbidden SERIALIZABLE transaction in HS.
Amit Langote
It's critical that the backend's idea of LOBLKSIZE match the way data has
actually been divided up in pg_largeobject. While we don't provide any
direct way to adjust that value, doing so is a one-line source code change
and various people have expressed interest recently in changing it. So,
just as with TOAST_MAX_CHUNK_SIZE, it seems prudent to record the value in
pg_control and cross-check that the backend's compiled-in setting matches
the on-disk data.
Also tweak the code in inv_api.c so that fetches from pg_largeobject
explicitly verify that the length of the data field is not more than
LOBLKSIZE. Formerly we just had Asserts() for that, which is no protection
at all in production builds. In some of the call sites an overlength data
value would translate directly to a security-relevant stack clobber, so it
seems worth one extra runtime comparison to be sure.
In the back branches, we can't change the contents of pg_control; but we
can still make the extra checks in inv_api.c, which will offer some amount
of protection against running with the wrong value of LOBLKSIZE.
HeapTupleSatisfiesVacuum() didn't properly discern between
DELETE_IN_PROGRESS and INSERT_IN_PROGRESS for rows that have been
inserted in the current transaction and deleted in a aborted
subtransaction of the current backend. At the very least that caused
problems for CLUSTER and CREATE INDEX in transactions that had
aborting subtransactions producing rows, leading to warnings like:
WARNING: concurrent delete in progress within table "..."
possibly in an endless, uninterruptible, loop.
Instead of treating *InProgress xmins the same as *IsCurrent ones,
treat them as being distinct like the other visibility routines. As
implemented this separatation can cause a behaviour change for rows
that have been inserted and deleted in another, still running,
transaction. HTSV will now return INSERT_IN_PROGRESS instead of
DELETE_IN_PROGRESS for those. That's both, more in line with the other
visibility routines and arguably more correct. The latter because a
INSERT_IN_PROGRESS will make callers look at/wait for xmin, instead of
xmax.
The only current caller where that's possibly worse than the old
behaviour is heap_prune_chain() which now won't mark the page as
prunable if a row has concurrently been inserted and deleted. That's
harmless enough.
As a cautionary measure also insert a interrupt check before the gotos
in IndexBuildHeapScan() that lead to the uninterruptible loop. There
are other possible causes, like a row that several sessions try to
update and all fail, for repeated loops and the cost of doing so in
the retry case is low.
As this bug goes back all the way to the introduction of
subtransactions in 573a71a5da backpatch to all supported releases.
Reported-By: Sandro Santilli
This test previously used a data value containing U+0080, and would
therefore fail if the database encoding didn't have an equivalent to
that; which only about half of our supported server encodings do.
We could fall back to using some plain-ASCII character, but that seems
like it's losing most of the point of the test. Instead switch to using
U+00A0 (no-break space), which translates into all our supported encodings
except the four in the EUC_xx family.
Per buildfarm testing. Back-patch to 9.1, which is as far back as this
test is expected to succeed everywhere. (9.0 has the test, but without
back-patching some 9.1 code changes we could not expect to get consistent
results across platforms anyway.)
Because RecoveryConflictInterrupt() didn't set the process latch
anything using the latter to wait for events didn't get notified about
recovery conflicts. Most latch users are never the target of recovery
conflicts, which explains the lack of reports about this until
now.
Since 9.3 two possible affected users exist though: The sql callable
pg_sleep() now uses latches to wait and background workers are
expected to use latches in their main loop. Both would currently wait
until the end of WaitLatch's timeout.
Fix by adding a SetLatch() to RecoveryConflictInterrupt(). It'd also
be possible to fix the issue by having each latch user set
set_latch_on_sigusr1. That seems failure prone and though, as most of
these callsites won't often receive recovery conflicts and thus will
likely only be tested against normal query cancels et al. It'd also be
unnecessarily verbose.
Backpatch to 9.1 where latches were introduced. Arguably 9.3 would be
sufficient, because that's where pg_sleep() was converted to waiting
on the latch and background workers got introduced; but there could be
user level code making use of the latch pre 9.3.
As of Xcode 5.0, Apple isn't including the Python framework as part of the
SDK-level files, which means that linking to it might fail depending on
whether Xcode thinks you've selected a specific SDK version. According to
their Tech Note 2328, they've basically deprecated the framework method of
linking to libpython and are telling people to link to the shared library
normally. (I'm pretty sure this is in direct contradiction to the advice
they were giving a few years ago, but whatever.) Testing says that this
approach works fine at least as far back as OS X 10.4.11, so let's just
rip out the framework special case entirely. We do still need a special
case to decide that OS X provides a shared library at all, unfortunately
(I wonder why the distutils check doesn't work ...). But this is still
less of a special case than before, so it's fine.
Back-patch to all supported branches, since we'll doubtless be hearing
about this more as more people update to recent Xcode.
The original coding in contrib/uuid-ossp created and destroyed a uuid_t
object (or, in some cases, even two of them) each time it was called.
This is not the intended usage: you're supposed to keep the uuid_t object
around so that the library can cache its state across uses. (Other UUID
libraries seem to keep equivalent state behind-the-scenes in static
variables, but OSSP chose differently.) Aside from being quite inefficient,
creating a new uuid_t loses knowledge of the previously generated UUID,
which in theory could result in duplicate V1-style UUIDs being created
on sufficiently fast machines.
On at least some platforms, creating a new uuid_t also draws some entropy
from /dev/urandom, leaving less for the rest of the system. This seems
sufficiently unpleasant to justify back-patching this change.
This reverts commit 4c5fde4e28.
It turns out that the %name-prefix syntax without "=" does not work
at all in pre-2.4 Bison. We are not prepared to make such a large
jump in minimum required Bison version just to suppress a warning
message in a version hardly any developers are using yet.
When 3.0 gets more popular, we'll figure out a way to deal with this.
In the meantime, BISONFLAGS=-Wno-deprecated is recommendable for
anyone using 3.0 who doesn't want to see the warning.
%name-prefix doesn't use an "=" sign according to the Bison docs, but it
silently accepted one anyway, until Bison 3.0. This was originally a
typo of mine in commit 012abebab1, and we
seem to have slavishly copied the error into all the other grammar files.
Per report from Vik Fearing; analysis by Peter Eisentraut.
Back-patch to all active branches, since somebody might try to build
a back branch with up-to-date tools.
Move the code that sends the initial status information as well as the
calculation of paths inside the ENSURE_ERROR_CLEANUP block. If this code
failed, we would "leak" a counter of number of concurrent backups, thereby
making the system always believe it was in backup mode. This could happen
if the sending failed (which it probably never did given that the small
amount of data to send would never cause a flush). It is very low risk, but
all operations after do_pg_start_backup should be protected.
On Mingw, it seems that scanf() doesn't necessarily accept the same format
codes that printf() does, and in particular it may fail to recognize %llu
even though printf() does. Since configure only probes printf() behavior
while setting up the INT64_FORMAT macros, this means it's unsafe to use
those macros with scanf(). We had only one instance of such a coding
pattern, in contrib/pg_stat_statements, so change that code to avoid
the problem.
Per buildfarm warnings. Back-patch to 9.0 where the troublesome code
was introduced.
Michael Paquier
The macros and functions that work with backup blocks in the redo function
use 0-based numbering, so let's use that consistently in the function that
generates the records too. Makes it so much easier to compare the
generation and replay functions.
Backpatch to 9.0, where we switched from 1-based to 0-based numbering.
Commit dd428c79 added dbId and tsId to the xl_xact_commit struct but missed
that prepared transaction commits reuse that struct. Fix that.
Because those fields were left unitialized, replaying a commit prepared WAL
record in a hot standby node would fail to remove the relcache init file.
That can lead to "could not open file" errors on the standby. Relcache init
file only needs to be removed when a system table/index is rewritten in the
transaction using two phase commit, so that should be rare in practice. In
HEAD, the incorrect dbId/tsId values are also used for filtering in logical
replication code, causing the transaction to always be filtered out.
Analysis and fix by Andres Freund. Backpatch to 9.0 where hot standby was
introduced.
In yesterday's commit 2dc4f011fd, I tried
to force buffering of stdout/stderr in initdb to be what it is by
default when the program is run interactively on Unix (since that's how
most manual testing is done). This tripped over the fact that Windows
doesn't support _IOLBF mode. We dealt with that a long time ago in
syslogger.c by falling back to unbuffered mode on Windows. Export that
solution in port.h and use it in initdb.
Back-patch to 8.4, like the previous commit.
The proc array can contain duplicate XIDs, when a transaction is just being
prepared for two-phase commit. To cope, remove any duplicates in
txid_current_snapshot(). Also ignore duplicates in the input functions, so
that if e.g. you have an old pg_dump file that already contains duplicates,
it will be accepted.
Report and fix by Jan Wieck. Backpatch to all supported versions.
To lock a prepared transaction's shared memory entry, we used to mark it
with the XID of the backend. When the XID was no longer active according
to the proc array, the entry was implicitly considered as not locked
anymore. However, when preparing a transaction, the backend's proc array
entry was cleared before transfering the locks (and some other state) to
the prepared transaction's dummy PGPROC entry, so there was a window where
another backend could finish the transaction before it was in fact fully
prepared.
To fix, rewrite the locking mechanism of global transaction entries. Instead
of an XID, just have simple locked-or-not flag in each entry (we store the
locking backend's backend id rather than a simple boolean, but that's just
for debugging purposes). The backend is responsible for explicitly unlocking
the entry, and to make sure that that happens, install a callback to unlock
it on abort or process exit.
Backpatch to all supported versions.
Since this program may print to either stdout or stderr, the relative
ordering of its messages depends on the buffering behavior of those files.
Force stdout to be line-buffered and stderr to be unbuffered, ensuring
that the behavior will match standard Unix interactive behavior, even
when stdout and stderr are rerouted to a file.
Per complaint from Tomas Vondra. The particular case he pointed out is
new in HEAD, but issues of the same sort could arise in any branch with
other error messages, so back-patch to all branches.
I'm unsure whether we might not want to do this in other client programs
as well. For the moment, just fix initdb.
The code expands a varbit gist leaf key to a node key by copying the bit
data twice in a varlen datum, as both the lower and upper key. The lower key
was expanded to INTALIGN size, but the padding bytes were not initialized.
That's a problem because when the lower/upper keys are compared, the padding
bytes are used compared too, when the values are otherwise equal. That could
lead to incorrect query results.
REINDEX is advised for any btree_gist indexes on bit or bit varying data
type, to fix any garbage padding bytes on disk.
Per Valgrind, reported by Andres Freund. Backpatch to all supported
versions.
config.pl and buildenv.pl can be used to customize build settings when
using MSVC. They should never get committed into the common source tree.
Back-patch to 9.0; it looks like the rules were different in 8.4.
Michael Paquier
Usually the search would find plain "tclsh" without any trouble,
but some installations might only have the version-numbered flavor
of that program.
No compatibility problems have been reported with 8.6, so we might
as well back-patch this to all active branches.
Christoph Berg
Back in 8.3, we installed permissions checks in these functions (see
commits 8bc225e799 and cc26599b72). But we forgot to document that
anywhere in the user-facing docs; it did get mentioned in the 8.3 release
notes, but nobody's looking at that any more. Per gripe from Suya Huang.
Commit 4318daecc9 broke it. The change in
sub-second precision at extreme dates is normal. The inconsistent
truncation vs. rounding is essentially a bug, albeit a longstanding one.
Back-patch to 8.4, like the causative commit.
Noah Misch