Add WITHOUT OVERLAPS clause to PRIMARY KEY and UNIQUE constraints.
These are backed by GiST indexes instead of B-tree indexes, since they
are essentially exclusion constraints with = for the scalar parts of
the key and && for the temporal part.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This is support function 12 for the GiST AM and translates
"well-known" RT*StrategyNumber values into whatever strategy number is
used by the opclass (since no particular numbers are actually
required). We will use this to support temporal PRIMARY
KEY/UNIQUE/FOREIGN KEY/FOR PORTION OF functionality.
This commit adds two implementations, one for internal GiST opclasses
(just an identity function) and another for btree_gist opclasses. It
updates btree_gist from 1.7 to 1.8, adding the support function for
all its opclasses.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
Previously we only allowed unique B-tree constraints on partitions
(and only if the constraint included all the partition keys). But we
could allow exclusion constraints with the same restriction. We also
require that those columns be compared for equality, not something
like &&.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Ronan Dunklau <ronan.dunklau@aiven.io>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/ec8b1d9b-502e-d1f8-e909-1bf9dffe6fa5@illuminatedcomputing.com
We chose a specific wording of the not-implemented errors for
pseudotype I/O functions and other cases where there's little
value in implementing input and/or output. gtsvectorin never
got that memo though, nor did most of contrib. Make these all
fall in line, mostly because I'm a neatnik but also to remove
unnecessary translatable strings.
gbtreekey_in needs a bit of extra love since it supports
multiple SQL types. Sadly, gbtreekey_out doesn't have the
ability to do that, but I think it's unreachable anyway.
Noted while surveying datatype input functions to see what we
have left to fix.
Instead of Abs() for int64, use the C standard functions labs() or
llabs() as appropriate. Define a small wrapper around them that
matches our definition of int64. (labs() is C90, llabs() is C99.)
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4beb42b5-216b-bce8-d452-d924d5794c63%40enterprisedb.com
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Since these macros just cast whatever you give them to the designated
output type, and many normal uses also cast the output type further, a
number of incorrect uses go undiscovered. The fixes in this patch
have been discovered by changing these macros to inline functions,
which is the subject of a future patch.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/8528fb7e-0aa2-6b54-85fb-0c0886dbd6ed%40enterprisedb.com
The planner has to special-case indexes on boolean columns, because
what we need for an indexscan on such a column is a qual of the shape
of "boolvar = pseudoconstant". For plain bool constants, previous
simplification will have reduced this to "boolvar" or "NOT boolvar",
and we have to reverse that if we want to make an indexqual. There is
existing code to do so, but it only fires when the index's opfamily
is BOOL_BTREE_FAM_OID or BOOL_HASH_FAM_OID. Thus extension AMs, or
extension opclasses such as contrib/btree_gin, are out in the cold.
The reason for hard-wiring the set of relevant opfamilies was mostly
to avoid a catalog lookup in a hot code path. We can improve matters
while not taking much of a performance hit by relying on the
hard-wired set when the opfamily OID is visibly built-in, and only
checking the catalogs when dealing with an extension opfamily.
While here, rename IsBooleanOpfamily to IsBuiltinBooleanOpfamily
to remind future users of that macro of its limitations. At some
point we might want to make indxpath.c's improved version of the
test globally accessible, but it's not presently needed elsewhere.
Zongliang Quan and Tom Lane
Discussion: https://postgr.es/m/f293b91d-1d46-d386-b6bb-4b06ff5c667b@yeah.net
If contrib/btree_gist is used to make a GIST index on a char(N)
(bpchar) column, and that column is retrieved via an index-only
scan, what came out had all trailing spaces removed. Since
that doesn't happen in any other kind of table scan, this is
clearly a bug. The cause is that gbt_bpchar_compress() strips
trailing spaces (using rtrim1) before a new index entry is made.
That was probably a good idea when this code was first written,
but since we invented index-only scans, it's not so good.
One answer could be to mark this opclass as incapable of index-only
scans. But to do so, we'd need an extension module version bump,
followed by manual action by DBAs to install the updated version
of btree_gist. And it's not really a desirable place to end up,
anyway.
Instead, let's fix the code by removing the unwanted space-stripping
action and adjusting the opclass's comparison logic to ignore
trailing spaces as bpchar normally does. This will not hinder
cases that work today, since index searches with this logic will
act the same whether trailing spaces are stored or not. It will
not by itself fix the problem of getting space-stripped results
from index-only scans, of course. Users who care about that can
REINDEX affected indexes after installing this update, to immediately
replace all improperly-truncated index entries. Otherwise, it can
be expected that the index's behavior will change incrementally as
old entries are replaced by new ones.
Per report from Alexander Lakhin. Back-patch to all supported branches.
Discussion: https://postgr.es/m/696c995b-b37f-5526-f45d-04abe713179f@gmail.com
We can revert the code changes of commit b5febc1d1 now, because
commit 9a3ddeb51 installed a real solution for the difficulty
that b5febc1d1 just dodged, namely that the planner might pick
the wrong one of several index columns nominally containing the
same value. It only matters which one we pick if we pick one
that's not returnable, and that mistake is now foreclosed.
Although both of the aforementioned commits were back-patched,
I don't feel a need to take any risk by back-patching this one.
The cases that it improves are very corner-ish.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Commit 57e3c5160b added a new GiST bool opclass, but it used gbtreekey4
to store the data, which left two bytes undefined, as reported by skink,
our valgrind animal. There was a bit more confusion, because the opclass
also used gbtreekey8 in the definition.
Fix by defining a new gbtreekey2 struct, and using it in all the places.
Discussion: https://postgr.es/m/CAE2gYzyDKJBZngssR84VGZEN=Ux=V9FV23QfPgo+7-yYnKKg4g@mail.gmail.com
Adds bool opclass to btree_gist extension, to allow creating GiST
indexes on bool columns. GiST indexes on a single bool column don't seem
particularly useful, but this allows defining exclusion constraings
involving a bool column, for example.
Author: Emre Hasegeli
Reviewed-by: Andrey Borodin
Discussion: https://postgr.es/m/CAE2gYzyDKJBZngssR84VGZEN=Ux=V9FV23QfPgo+7-yYnKKg4g@mail.gmail.com
The current code could do unnecessary calls to isinf() (two for the
argument values all the time while one could be sufficient in some
cases). zero_is_valid was never used but the result value was still
checked on 0 in the first position of the check.
This is similar to 607f8ce. btree_gist has just copy-pasted the code
doing those checks from the backend float4/8 code, as of the macro
CHECKFLOATVAL(), to do the work.
Author: Haiying Tang
Discussion: https://postgr.es/m/OS0PR01MB611358E3A7BC3C2F874AC36BFBF39@OS0PR01MB6113.jpnprd01.prod.outlook.com
This reverts commit 9f984ba6d2.
It was making the buildfarm unhappy, apparently setting client_min_messages
in a regression test produces different output if log_statement='all'.
Another issue is that I now suspect the bit sortsupport function was in
fact not correct to call byteacmp(). Revert to investigate both of those
issues.
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
Andres Freund pointed out that allowing non-superusers to run
"CREATE EXTENSION ... FROM unpackaged" has security risks, since
the unpackaged-to-1.0 scripts don't try to verify that the existing
objects they're modifying are what they expect. Just attaching such
objects to an extension doesn't seem too dangerous, but some of them
do more than that.
We could have resolved this, perhaps, by still requiring superuser
privilege to use the FROM option. However, it's fair to ask just what
we're accomplishing by continuing to lug the unpackaged-to-1.0 scripts
forward. None of them have received any real testing since 9.1 days,
so they may not even work anymore (even assuming that one could still
load the previous "loose" object definitions into a v13 database).
And an installation that's trying to go from pre-9.1 to v13 or later
in one jump is going to have worse compatibility problems than whether
there's a trivial way to convert their contrib modules into extension
style.
Hence, let's just drop both those scripts and the core-code support
for "CREATE EXTENSION ... FROM".
Discussion: https://postgr.es/m/20200213233015.r6rnubcvl4egdh5r@alap3.anarazel.de
This allows these modules to be installed into a database without
superuser privileges (assuming that the DBA or sysadmin has installed
the module's files in the expected place). You only need CREATE
privilege on the current database, which by default would be
available to the database owner.
The following modules are marked trusted:
btree_gin
btree_gist
citext
cube
dict_int
earthdistance
fuzzystrmatch
hstore
hstore_plperl
intarray
isn
jsonb_plperl
lo
ltree
pg_trgm
pgcrypto
seg
tablefunc
tcn
tsm_system_rows
tsm_system_time
unaccent
uuid-ossp
In the future we might mark some more modules trusted, but there
seems to be no debate about these, and on the whole it seems wise
to be conservative with use of this feature to start out with.
Discussion: https://postgr.es/m/32315.1580326876@sss.pgh.pa.us
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
The basic rule we follow here is to always first include 'postgres.h' or
'postgres_fe.h' whichever is applicable, then system header includes and
then Postgres header includes. In this, we also follow that all the
Postgres header includes are in order based on their ASCII value. We
generally follow these rules, but the code has deviated in many places.
This commit makes it consistent just for contrib modules. The later
commits will enforce similar rules in other parts of code.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
Previously, floating-point output was done by rounding to a specific
decimal precision; by default, to 6 or 15 decimal digits (losing
information) or as requested using extra_float_digits. Drivers that
wanted exact float values, and applications like pg_dump that must
preserve values exactly, set extra_float_digits=3 (or sometimes 2 for
historical reasons, though this isn't enough for float4).
Unfortunately, decimal rounded output is slow enough to become a
noticable bottleneck when dealing with large result sets or COPY of
large tables when many floating-point values are involved.
Floating-point output can be done much faster when the output is not
rounded to a specific decimal length, but rather is chosen as the
shortest decimal representation that is closer to the original float
value than to any other value representable in the same precision. The
recently published Ryu algorithm by Ulf Adams is both relatively
simple and remarkably fast.
Accordingly, change float4out/float8out to output shortest decimal
representations if extra_float_digits is greater than 0, and make that
the new default. Applications that need rounded output can set
extra_float_digits back to 0 or below, and take the resulting
performance hit.
We make one concession to portability for systems with buggy
floating-point input: we do not output decimal values that fall
exactly halfway between adjacent representable binary values (which
would rely on the reader doing round-to-nearest-even correctly). This
is known to be a problem at least for VS2013 on Windows.
Our version of the Ryu code originates from
https://github.com/ulfjack/ryu/ at commit c9c3fb1979, but with the
following (significant) modifications:
- Output format is changed to use fixed-point notation for small
exponents, as printf would, and also to use lowercase 'e', a
minimum of 2 exponent digits, and a mandatory sign on the exponent,
to keep the formatting as close as possible to previous output.
- The output of exact midpoint values is disabled as noted above.
- The integer fast-path code is changed somewhat (since we have
fixed-point output and the upstream did not).
- Our project style has been largely applied to the code with the
exception of C99 declaration-after-statement, which has been
retained as an exception to our present policy.
- Most of upstream's debugging and conditionals are removed, and we
use our own configure tests to determine things like uint128
availability.
Changing the float output format obviously affects a number of
regression tests. This patch uses an explicit setting of
extra_float_digits=0 for test output that is not expected to be
exactly reproducible (e.g. due to numerical instability or differing
algorithms for transcendental functions).
Conversions from floats to numeric are unchanged by this patch. These
may appear in index expressions and it is not yet clear whether any
change should be made, so that can be left for another day.
This patch assumes that the only supported floating point format is
now IEEE format, and the documentation is updated to reflect that.
Code by me, adapting the work of Ulf Adams and other contributors.
References:
https://dl.acm.org/citation.cfm?id=3192369
Reviewed-by: Tom Lane, Andres Freund, Donald Dong
Discussion: https://postgr.es/m/87r2el1bx6.fsf@news-spur.riddles.org.uk
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Commit b5febc1d1 added a contrib/btree_gist test case that has been
observed to fail in the buildfarm as a result of background auto-analyze
updating stats and changing the selected plan. Forestall that by
forcibly analyzing in foreground, instead. The new plan choice is
just as good for our purposes, since we really only care that an
index-only plan does not get selected.
Back-patch to 9.5, like the previous patch.
Discussion: https://postgr.es/m/14643.1539629304@sss.pgh.pa.us
Up to now, get_const_expr() insisted on prefixing BIT and VARBIT
literals with 'B'. That's not really necessary, because we always
append explicit-cast syntax to identify the constant's type.
Moreover, it's subtly wrong for VARBIT, because the parser will
interpret B'...' as '...'::"bit"; see make_const() which explicitly
assigns type BITOID for a T_BitString literal. So what had been
a simple VARBIT literal is reconstructed as ('...'::"bit")::varbit,
which is not the same thing, at least not before constant folding.
This results in odd differences after dump/restore, as complained
of by the patch submitter, and it could result in actual failures in
partitioning or inheritance DDL operations (see commit 542320c2b,
which repaired similar misbehaviors for some other data types).
Fixing it is pretty easy: just remove the special case and let the
default code path handle these types. We could have kept the special
case for BIT only, but there seems little point in that.
Like the previous patch, I judge that back-patching this into stable
branches wouldn't be a good idea. However, it seems not quite too
late for v11, so let's fix it there.
Paul Guo, reviewed by Davy Machado and John Naylor, minor adjustments
by me
Discussion: https://postgr.es/m/CABQrizdTra=2JEqA6+Ms1D1k1Kqw+aiBBhC9TreuZRX2JzxLAA@mail.gmail.com
Some data types under adt/ have separate header files, but most simple
ones do not, and their public functions are defined in builtins.h. As
the patches improving geometric types will require making additional
functions public, this seems like a good opportunity to create a header
for floats types.
Commit 1acf757255 made _cmp functions public to solve NaN issues locally
for GiST indexes. This patch reworks it in favour of a more widely
applicable API. The API uses inline functions, as they are easier to
use compared to macros, and avoid double-evaluation hazards.
Author: Emre Hasegeli
Reviewed-by: Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/CAE2gYzxF7-5djV6-cEvqQu-fNsnt%3DEqbOURx7ZDg%2BVv6ZMTWbg%40mail.gmail.com
If convert_to_scalar is passed a pair of datatypes it can't cope with,
its former behavior was just to elog(ERROR). While this is OK so far as
the core code is concerned, there's extension code that would like to use
scalarltsel/scalargtsel/etc as selectivity estimators for operators that
work on non-core datatypes, and this behavior is a show-stopper for that
use-case. If we simply allow convert_to_scalar to return FALSE instead of
outright failing, then the main logic of scalarltsel/scalargtsel will work
fine for any operator that behaves like a scalar inequality comparison.
The lack of conversion capability will mean that we can't estimate to
better than histogram-bin-width precision, since the code will effectively
assume that the comparison constant falls at the middle of its bin. But
that's still a lot better than nothing. (Someday we should provide a way
for extension code to supply a custom version of convert_to_scalar, but
today is not that day.)
While poking at this issue, we noted that the existing code for handling
type bytea in convert_to_scalar is several bricks shy of a load.
It assumes without checking that if the comparison value is type bytea,
the bounds values are too; in the worst case this could lead to a crash.
It also fails to detoast the input values, so that the comparison result is
complete garbage if any input is toasted out-of-line, compressed, or even
just short-header. I'm not sure how often such cases actually occur ---
the bounds values, at least, are probably safe since they are elements of
an array and hence can't be toasted. But that doesn't make this code OK.
Back-patch to all supported branches, partly because author requested that,
but mostly because of the bytea bugs. The change in API for the exposed
routine convert_network_to_scalar() is theoretically a back-patch hazard,
but it seems pretty unlikely that any third-party code is calling that
function directly.
Tomas Vondra, with some adjustments by me
Discussion: https://postgr.es/m/b68441b6-d18f-13ab-b43b-9a72188a4e02@2ndquadrant.com
Since 9.5, it's possible that some but not all columns of an index
support returning the indexed value for index-only scans. If the
same indexed column appears in index columns that behave both ways,
check_index_only() supposed that it'd be OK to do an index-only scan
testing that column; but that fails if we have to recheck the indexed
condition on one of the columns that doesn't support this.
In principle we could make this work by remapping the recheck expressions
to pull the value from a column that does support returning the indexed
value. But such cases are so weird and rare that, at least for now,
it doesn't seem worth the trouble. Instead, just teach check_index_only
that a value is returnable only if all the index columns containing it
are returnable, rather than any of them.
Per report from David Pereiro Lagares. Back-patch to 9.5 where the
possibility of this situation appeared.
Kyotaro Horiguchi
Discussion: https://postgr.es/m/1516210494.1798.16.camel@nlpgo.com
A previous commit added inline functions that provide fast(er) and
correct overflow checks for signed integer math. Use them in a
significant portion of backend code. There's more to touch in both
backend and frontend code, but these were the easily identifiable
cases.
The old overflow checks are noticeable in integer heavy workloads.
A secondary benefit is that getting rid of overflow checks that rely
on signed integer overflow wrapping around, will allow us to get rid
of -fwrapv in the future. Which in turn slows down other code.
Author: Andres Freund
Discussion: https://postgr.es/m/20171024103954.ztmatprlglz3rwke@alap3.anarazel.de
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Peter Eisentraut