Harden hstore_plperl, hstore_plpython, and ltree_plpython
against search-path-based attacks by using @extschema:name@
notation to refer to the underlying hstore or ltree data type.
This allows removal of the previous documentation warning
suggesting that they must be installed in the same schema as
the underlying data type. In passing, also improve a para in
extend.sgml to suggest using @extschema:name@ for such purposes.
Discussion: https://postgr.es/m/692480.1736021695@sss.pgh.pa.us
The synchronous_standby_names GUC allows specifying num_sync,
the number of synchronous standbys transactions must wait for
replies from. This value must be an integer greater than zero.
This commit updates the documentation to clarify this requirement.
Reported-by: Asphator <asphator@gmail.com>
Discussion: https://postgr.es/m/18663-b02f75cb919f1b60@postgresql.org
This new parameter can be used to change the minimum allowed
password length (in bytes). Note that it has no effect if a user
supplies a pre-encrypted password.
Author: Emanuele Musella, Maurizio Boriani
Reviewed-by: Tomas Vondra, Bertrand Drouvot, Japin Li
Discussion: https://postgr.es/m/CA%2BugDNyYtHOtWCqVD3YkSVYDWD_1fO8Jm_ahsDGA5dXhbDPwrQ%40mail.gmail.com
Commit c758119e5b increased the default number of semaphores
required for autovacuum workers from 3 to 16. Unfortunately, some
systems have very low default settings for SEMMNS, and this change
moved the minimum required for Postgres well beyond that limit (see
commit 38da053463 for more details).
With this commit, initdb will lower the default value for
autovacuum_worker_slots as needed, just like it already does for
parameters such as max_connections and shared_buffers. We test
for (max_connections / 6) slots, which conveniently has the
following properties:
* For the initial max_connections default of 100, the default of
autovacuum_worker_slots will be 16, which is its initial default
value specified in the documentation and in guc_tables.c.
* For the lowest possible max_connections default of 25, the
default of autovacuum_worker_slots will be 4, which means we only
need one additional semaphore for autovacuum workers (as compared
to before commit c758119e5b). This leaves some wiggle room for
new auxiliary workers, etc. on systems with low SEMMNS, and it
ensures that the default number of slots will be greater than or
equal to the default value of autovacuum_max_workers (3).
Reported-by: Tom Lane
Suggested-by: Andres Freund
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1346002.1736198977%40sss.pgh.pa.us
This commit introduces a new parameter named
autovacuum_worker_slots that controls how many autovacuum worker
slots to reserve during server startup. Modifying this new
parameter's value does require a server restart, but it should
typically be set to the upper bound of what you might realistically
need to set autovacuum_max_workers. With that new parameter in
place, autovacuum_max_workers can now be changed with a SIGHUP
(e.g., pg_ctl reload).
If autovacuum_max_workers is set higher than
autovacuum_worker_slots, a WARNING is emitted, and the server will
only start up to autovacuum_worker_slots workers at a given time.
If autovacuum_max_workers is set to a value less than the number of
currently-running autovacuum workers, the existing workers will
continue running, but no new workers will be started until the
number of running autovacuum workers drops below
autovacuum_max_workers.
Reviewed-by: Sami Imseih, Justin Pryzby, Robert Haas, Andres Freund, Yogesh Sharma
Discussion: https://postgr.es/m/20240410212344.GA1824549%40nathanxps13
VERBOSE messages from ANALYZE, CLUSTER, REINDEX, and VACUUM are logged
at the INFO level, but this detail was missing from the documentation.
This commit updates the docs to mention the log level for these messages.
Author: Masahiro Ikeda
Reviewed-by: Yugo Nagata
Discussion: https://postgr.es/m/b4a4b7916982dccd9607c8efb3ce5116@oss.nttdata.com
Slightly faulty logic in the original jsonb code (commit d9134d0a35)
results in an empty top level array sorting less than a json null. We
can't change the sort order now since it would affect btree indexes over
jsonb, so document the anomaly.
Backpatch to all live branches (13 .. 17)
In master, also add a code comment noting the anomaly.
Reported-by: Yan Chengpen
Reviewed-by: Jian He
Discussion: https://postgr.es/m/OSBPR01MB45199DD8DA2D1CECD50518188E272@OSBPR01MB4519.jpnprd01.prod.outlook.com
These two platforms have a remarkably tight default limit on the
number of SysV semaphores in the system: SEMMNS is only 60
out-of-the-box. Unless manual action is taken to raise that,
we'll only be able to allocate 3 sets of 16 usable semaphores
each, leading to initdb setting max_connections to just 20.
That's problematic because the core regression tests expect
to be able to launch 20 concurrent sessions, leaving us with
no headroom. This seems to be the cause of intermittent
buildfarm failures on some machines.
While there's no getting around the fact that you'd better raise
SEMMNS for production use on these platforms, it does seem desirable
for "make check" to pass reliably without that. We can make that
happen, at least for awhile longer, with two small changes:
* Change sysv_sema.c's SEMAS_PER_SET to 19, so that we can eat up
all of the available semas not just most of them.
* Change initdb to make the smallest max_connections value it will
consider be 25 not 20.
As of HEAD this will leave us with four free semaphores (using the
default values for other relevant parameters such as max_wal_senders).
So we won't need to consider this again until we've invented five
more background processes. Maybe by then we can switch both these
platforms to some other semaphore API.
For the moment, do this only in master; there've not been field
complaints that might justify a back-patch.
Discussion: https://postgr.es/m/db2773a2-aca0-43d0-99c1-060efcd9954e@gmail.com
This adds a new variable-numbered statistics kind in pgstats, where the
object ID key of the stats entries is based on the proc number of the
backends. This acts as an upper-bound for the number of stats entries
that can exist at once. The entries are created when a backend starts
after authentication succeeds, and are removed when the backend exits,
making the stats entry exist for as long as their backend is up and
running. These are not written to the pgstats file at shutdown (note
that write_to_file is disabled, as a safety measure).
Currently, these stats include only information about the I/O generated
by a backend, using the same layer as pg_stat_io, except that it is now
possible to know how much activity is happening in each backend rather
than an overall aggregate of all the activity. A function called
pg_stat_get_backend_io() is added to access this data depending on the
PID of a backend. The existing structure could be expanded in the
future to add more information about other statistics related to
backends, depending on requirements or ideas.
Auxiliary processes are not included in this set of statistics. These
are less interesting to have than normal backends as they have dedicated
entries in pg_stat_io, and stats kinds of their own.
This commit includes also pg_stat_reset_backend_stats(), function able
to reset all the stats associated to a single backend.
Bump catalog version and PGSTAT_FILE_FORMAT_ID.
Author: Bertrand Drouvot
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, Michael Paquier, Nazir
Bilal Yavuz
Discussion: https://postgr.es/m/ZtXR+CtkEVVE/LHF@ip-10-97-1-34.eu-west-3.compute.internal
This commit adds support for the following items in psql, able to show a
service name, when available:
- Variable SERVICE.
- Substitution %s in PROMPT{1,2,3}.
This relies on 4b99fed754, that has made the service name available in
PGconn for libpq.
Author: Michael Banck
Reviewed-by: Greg Sabino Mullane
Discussion: https://postgr.es/m/6723c612.050a0220.1567f4.b94a@mx.google.com
This commit adds one field to PGconn for the database service name (if
any), with PQservice() as routine to retrieve it. Like the other
routines of this area, NULL is returned as result if the connection is
NULL.
A follow-up patch will make use of this feature to be able to display
the service name in the psql prompt.
Author: Michael Banck
Reviewed-by: Greg Sabino Mullane
Discusion: https://postgr.es/m/6723c612.050a0220.1567f4.b94a@mx.google.com
Two places in the documentation suggest B-tree is the only index access
method allowing parallel builds. Commit b4375717 added parallel builds
for BRIN too, but failed to update the docs. So fix that, and backpatch
to 17, where parallel BRIN builds were introduced.
Author: Egor Rogov
Backpatch-through: 17
Discussion: https://postgr.es/m/114e2d5d-125e-07d8-94aa-5ad175fb7443@postgrespro.ru
The documentation in wal.sgml explains that old WAL files cannot be
removed or recycled until they are archived (when WAL archiving is used)
or replicated (when using replication slots). However, it did not mention
that, similarly, old WAL files are also kept until they are summarized
if WAL summarization is enabled. This commit adds that clarification
to the documentation.
Back-patch to v17 where WAL summarization was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/fd0eb0a5-f43b-4e06-b450-cbca011b6cff@oss.nttdata.com
This commit introduces the uuidv7() SQL function, which generates UUID
version 7 as specified in RFC 9652. UUIDv7 combines a Unix timestamp
in milliseconds and random bits, offering both uniqueness and
sortability.
In our implementation, the 12-bit sub-millisecond timestamp fraction
is stored immediately after the timestamp, in the space referred to as
"rand_a" in the RFC. This ensures additional monotonicity within a
millisecond. The rand_a bits also function as a counter. We select a
sub-millisecond timestamp so that it monotonically increases for
generated UUIDs within the same backend, even when the system clock
goes backward or when generating UUIDs at very high
frequency. Therefore, the monotonicity of generated UUIDs is ensured
within the same backend.
This commit also expands the uuid_extract_timestamp() function to
support UUID version 7.
Additionally, an alias uuidv4() is added for the existing
gen_random_uuid() SQL function to maintain consistency.
Bump catalog version.
Author: Andrey Borodin
Reviewed-by: Sergey Prokhorenko, Przemysław Sztoch, Nikolay Samokhvalov
Reviewed-by: Peter Eisentraut, Jelte Fennema-Nio, Aleksander Alekseev
Reviewed-by: Masahiko Sawada, Lukas Fittl, Michael Paquier, Japin Li
Reviewed-by: Marcos Pegoraro, Junwang Zhao, Stepan Neretin
Reviewed-by: Daniel Vérité
Discussion: https://postgr.es/m/CAAhFRxitJv%3DyoGnXUgeLB_O%2BM7J2BJAmb5jqAT9gZ3bij3uLDA%40mail.gmail.com
The topic of turning EXPLAIN's BUFFERS option on with the ANALYZE option
has come up a few times over the past few years. In many ways, doing this
seems like a good idea as it may be more obvious to users why a given
query is running more slowly than they might expect. Also, from my own
(David's) personal experience, I've seen users posting to the mailing
lists with two identical plans, one slow and one fast asking why their
query is sometimes slow. In many cases, this is due to additional reads.
Having BUFFERS on by default may help reduce some of these questions, and
if not, make it more obvious to the user before they post, or save a
round-trip to the mailing list when additional I/O effort is the cause of
the slowness.
The general consensus is that we want BUFFERS on by default with
ANALYZE. However, there were more than zero concerns raised with doing
so. The primary reason against is the additional verbosity, making it
harder to read large plans. Another concern was that buffer information
isn't always useful so may not make sense to have it on by default.
It's currently December, so let's commit this to see if anyone comes
forward with a strong objection against making this change. We have over
half a year remaining in the v18 cycle where we could still easily consider
reverting this if someone were to come forward with a convincing enough
reason as to why doing this is a bad idea.
There were two patches independently submitted to achieve this goal, one
by me and the other by Guillaume. This commit is a mix of both of these
patches with some additional work done by me to adjust various
additional places in the documentation which include EXPLAIN ANALYZE
output.
Author: Guillaume Lelarge, David Rowley
Reviewed-by: Robert Haas, Greg Sabino Mullane, Michael Christofides
Discussion: https://postgr.es/m/CANNMO++W7MM8T0KyXN3ZheXXt-uLVM3aEtZd+WNfZ=obxffUiA@mail.gmail.com
It looks like the example case was once modified to increase the number
of rows but the EXPLAIN ANALYZE output wasn't updated to reflect that.
Also adjust the text which discusses the index sizes. With the example
table size, the bloom index isn't quite 8 times more space efficient
than the btree indexes.
Discussion: https://postgr.es/m/CAApHDvovx8kQ0=HTt85gFDAwmTJHpCgiSvRmQZ_6u_g-vQYM_w@mail.gmail.com
Backpatch-through: 13, all supported versions
Ensure stored generated columns that are part of REPLICA IDENTITY must be
published explicitly for UPDATE and DELETE operations to be published. We
can publish generated columns by listing them in the column list or by
enabling the publish_generated_columns option.
This commit changes the behavior of the test added in commit adedf54e65 by
giving an ERROR for the UPDATE operation in such cases. There is no way to
trigger the bug reported in commit adedf54e65 but we didn't remove the
corresponding code change because it is still relevant when replicating
changes from a publisher with version less than 18.
We decided not to backpatch this behavior change to avoid the risk of
breaking existing output plugins that may be sending generated columns by
default although we are not aware of any such plugin. Also, we didn't see
any reports related to this on STABLE branches which is another reason not
to backpatch this change.
Author: Shlok Kyal, Hou Zhijie
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CANhcyEVw4V2Awe2AB6i0E5AJLNdASShGfdBLbUd1XtWDboymCA@mail.gmail.com
The last section of pg_createsubscriber used the terms
"publication-name", "replication-slot-name", and "subscription-name".
These terms are not defined on the page, which was confusing, and the
intention is clearly to refer to the values one would give to the
options --publication, --subscription and --replication-slot. Let's
simplify the documentation by mentioning the option switches, instead of
these terms.
Reported-by: Christophe Courtois
Author: Shubham Khanna
Reviewed-by: Vignesh C, Peter Smith
Discussion: https://postgr.es/m/173288198026.714.15127074046508836738@wrigleys.postgresql.org
Backpatch-through: 17
MD5 has been considered to be unsuitable for use as a cryptographic
hash algorithm for some time. Furthermore, MD5 password hashes in
PostgreSQL are vulnerable to pass-the-hash attacks, i.e., knowing
the username and hashed password is sufficient to authenticate.
The SCRAM-SHA-256 method added in v10 is not subject to these
problems and is considered to be superior to MD5.
This commit marks MD5 password support in PostgreSQL as deprecated
and to be removed in a future release. The documentation now
contains several deprecation notices, and CREATE ROLE and ALTER
ROLE now emit deprecation warnings when setting MD5 passwords. The
warnings can be disabled by setting the md5_password_warnings
parameter to "off".
Reviewed-by: Greg Sabino Mullane, Jim Nasby
Discussion: https://postgr.es/m/ZwbfpJJol7lDWajL%40nathan
Historically we tolerated the absence of various C runtime library
features for the benefit of the MinGW tool chain, because it used
ancient msvcrt.dll for a long period of time. It now uses ucrt by
default (like Windows 10+, Visual Studio 2015+), and that's the only
configuration we're testing.
In practice, we effectively required ucrt already in PostgreSQL 17, when
commit 8d9a9f03 required _create_locale etc, first available in
msvcr120.dll (Visual Studio 2013, the last of the pre-ucrt series of
runtimes), and for MinGW users that practically meant ucrt because it
was difficult or impossible to use msvcr120.dll. That may even not have
been the first such case, but old MinGW configurations had already
dropped off our testing radar so we weren't paying much attention.
This commit formalizes the requirement. It also removes a couple of
obsolete comments that discussed msvcrt.dll limitations, and some tests
of !defined(_MSC_VER) to imply msvcrt.dll. There are many more
anachronisms, but it'll take some time to figure out how to remove them
all. APIs affected relate to locales, UTF-8, threads, large files and
more.
Thanks to Peter Eisentraut for the documentation change. It's not
really necessary to talk about ucrt explicitly in such a short section,
since it's the default for MinGW-w64 and MSYS2. It's enough to prune
references and broken links to much older tools.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/d9e7731c-ca1b-477c-9298-fa51e135574a%40eisentraut.org
This allows for example using LIKE with case-insensitive collations.
There was previously no internal implementation of this, so it was met
with a not-supported error. This adds the internal implementation and
removes the error. The implementation follows the specification of
the SQL standard for this.
Unlike with deterministic collations, the LIKE matching cannot go
character by character but has to go substring by substring. For
example, if we are matching against LIKE 'foo%bar', we can't start by
looking for an 'f', then an 'o', but instead with have to find
something that matches 'foo'. This is because the collation could
consider substrings of different lengths to be equal. This is all
internal to MatchText() in like_match.c.
The changes in GenericMatchText() in like.c just pass through the
locale information to MatchText(), which was previously not needed.
This matches exactly Generic_Text_IC_like() below.
ILIKE is not affected. (It's unclear whether ILIKE makes sense under
nondeterministic collations.)
This also updates match_pattern_prefix() in like_support.c to support
optimizing the case of an exact pattern with nondeterministic
collations. This was already alluded to in the previous code.
(includes documentation examples from Daniel Vérité and test cases
from Paul A Jungwirth)
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/700d2e86-bf75-4607-9cf2-f5b7802f6e88@eisentraut.org
When using a pipeline, a transaction starts from the first command and
is committed with a Sync message or when the pipeline ends.
Functions like IsInTransactionBlock() or PreventInTransactionBlock()
were already able to understand a pipeline as being in a transaction
block, but it was not the case of CheckTransactionBlock(). This
function is called for example to generate a WARNING for SET LOCAL,
complaining that it is used outside of a transaction block.
The current state of the code caused multiple problems, like:
- SET LOCAL executed at any stage of a pipeline issued a WARNING, even
if the command was at least second in line where the pipeline is in a
transaction state.
- LOCK TABLE failed when invoked at any step of a pipeline, even if it
should be able to work within a transaction block.
The pipeline protocol assumes that the first command of a pipeline is
not part of a transaction block, and that any follow-up commands is
considered as within a transaction block.
This commit changes the backend so as an implicit transaction block is
started each time the first Execute message of a pipeline has finished
processing, with this implicit transaction block ended once a sync is
processed. The checks based on XACT_FLAGS_PIPELINING in the routines
checking if we are in a transaction block are not necessary: it is
enough to rely on the existing ones.
Some tests are added to pgbench, that can be backpatched down to v17
when \syncpipeline is involved and down to v14 where \startpipeline and
\endpipeline are available. This is unfortunately limited regarding the
error patterns that can be checked, but it provides coverage for various
pipeline combinations to check if these succeed or fail. These tests
are able to capture the case of SET LOCAL's WARNING. The author has
proposed a different feature to improve the coverage by adding similar
meta-commands to psql where error messages could be checked, something
more useful for the cases where commands cannot be used in transaction
blocks, like REINDEX CONCURRENTLY or VACUUM. This is considered as
future work for v18~.
Author: Anthonin Bonnefoy
Reviewed-by: Jelte Fennema-Nio, Michael Paquier
Discussion: https://postgr.es/m/CAO6_XqrWO8uNBQrSu5r6jh+vTGi5Oiyk4y8yXDORdE2jbzw8xw@mail.gmail.com
Backpatch-through: 13
In commit 641a5b7a14, I removed "nbsp" characters from SVG files, not
realizing the SVG files were generated from GV files and that the "nbsp"
characters were caused by trailing ASCII spaces in GV files. This
commit restores the "nbsp" SVG characters and adds a GV comment about
how the trailing spaces cause the "nbsp" output.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/2c5dd601-b245-4092-9c27-6d1ad51609df%40eisentraut.org
Backpatch-through: master
The ordering of DISTINCT items is semantically insignificant, so we
can reorder them as needed. In fact, in the parser, we absorb the
sorting semantics of the sortClause as much as possible into the
distinctClause, ensuring that one clause is a prefix of the other.
This can help avoid a possible need to re-sort.
In this commit, we attempt to adjust the DISTINCT keys to match the
input path's pathkeys. This can likewise help avoid re-sorting, or
allow us to use incremental-sort to save efforts.
For DISTINCT ON expressions, the parser already ensures that they
match the initial ORDER BY expressions. When reordering the DISTINCT
keys, we must ensure that the resulting pathkey list matches the
initial distinctClause pathkeys.
This introduces a new GUC, enable_distinct_reordering, which allows
the optimization to be disabled if needed.
Author: Richard Guo
Reviewed-by: Andrei Lepikhov
Discussion: https://postgr.es/m/CAMbWs48dR26cCcX0f=8bja2JKQPcU64136kHk=xekHT9xschiQ@mail.gmail.com
Per PEP 3114, iterator.next() has been renamed to iterator.__next__(),
and one example in the documentation still used next(). This caused the
example provided to fail the function creation since Python 2 is not
supported anymore since 19252e8ec9.
Author: Erik Wienhold
Discussion: https://postgr.es/m/173209043143.2092749.13692266486972491694@wrigleys.postgresql.org
Backpatch-through: 15
Commit 4ac2a9bece introduced the REJECT_LIMIT option for the COPY
command. This commit extends the support for this option to file_fdw.
As well as REJECT_LIMIT option for COPY, this option limits
the maximum number of erroneous rows that can be skipped.
If the number of data type conversion errors exceeds this limit,
accessing the file_fdw foreign table will fail with an error,
even when on_error = 'ignore' is specified.
Since the CREATE/ALTER FOREIGN TABLE commands require foreign
table options to be single-quoted, this commit updates
defGetCopyRejectLimitOption() to handle also string value for them,
in addition to int64 value for COPY command option.
Author: Atsushi Torikoshi
Reviewed-by: Fujii Masao, Yugo Nagata, Kirill Reshke
Discussion: https://postgr.es/m/bab68a9fc502b12693f0755b6f35f327@oss.nttdata.com
Previously, database object statistics manipulation functions like
pg_set_relation_stats() reported unclear error and hint messages
when executed during recovery. These messages were "internal",
making it difficult for users to understand the issue:
ERROR: cannot acquire lock mode ShareUpdateExclusiveLock on database objects while recovery is in progress
HINT: Only RowExclusiveLock or less can be acquired on database objects during recovery.
This commit updates the error handling so that, if these functions
are called during recovery, they produce clearer messages:
ERROR: recovery is in progress
HINT: Statistics cannot be modified during recovery.
The related documentation has also been updated to explicitly
clarify that these functions are not available during recovery.
Author: Fujii Masao
Reviewed-by: Heikki Linnakangas, Maxim Orlov
Discussion: https://postgr.es/m/6d313829-5f56-4a28-ae4b-bd01bf1ae791@oss.nttdata.com
Allowing foreign keys where the referenced and the referencing columns
have collations with different notions of equality is problematic.
This can only happen when using nondeterministic collations, for
example, if the referencing column is case-insensitive and the
referenced column is not, or vice versa. It does not happen if both
collations are deterministic.
To show one example:
CREATE COLLATION case_insensitive (provider = icu, deterministic = false, locale = 'und-u-ks-level2');
CREATE TABLE pktable (x text COLLATE "C" PRIMARY KEY);
CREATE TABLE fktable (x text COLLATE case_insensitive REFERENCES pktable ON UPDATE CASCADE ON DELETE CASCADE);
INSERT INTO pktable VALUES ('A'), ('a');
INSERT INTO fktable VALUES ('A');
BEGIN; DELETE FROM pktable WHERE x = 'a'; TABLE fktable; ROLLBACK;
BEGIN; DELETE FROM pktable WHERE x = 'A'; TABLE fktable; ROLLBACK;
Both of these DELETE statements delete the one row from fktable. So
this means that one row from fktable references two rows in pktable,
which should not happen. (That's why a primary key or unique
constraint is required on pktable.)
When nondeterministic collations were implemented, the SQL standard
available to yours truly said that referential integrity checks should
be performed with the collation of the referenced column, and so
that's how we implemented it. But this turned out to be a mistake in
the SQL standard, for the same reasons as above, that was later
(SQL:2016) fixed to require both collations to be the same. So that's
what we are aiming for here.
We don't have to be quite so strict. We can allow different
collations if they are both deterministic. This is also good for
backward compatibility.
So the new rule is that the collations either have to be the same or
both deterministic. Or in other words, if one of them is
nondeterministic, then both have to be the same.
Users upgrading from before that have affected setups will need to
make changes to their schemas (i.e., change one or both collations in
affected foreign-key relationships) before the upgrade will succeed.
Some of the nice test cases for the previous situation in
collate.icu.utf8.sql are now obsolete. They are changed to just check
the error checking of the new rule. Note that collate.sql already
contained a test for foreign keys with different deterministic
collations.
A bunch of code in ri_triggers.c that added a COLLATE clause to
enforce the referenced column's collation can be removed, because both
columns now have to have the same notion of equality, so it doesn't
matter which one to use.
Reported-by: Paul Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/78d824e0-b21e-480d-a252-e4b84bc2c24b@illuminatedcomputing.com
Tom Lane