57 Commits (27cc7cd2bc8a5e8efc8279bc5d2a8ae42fd8ad33)

Author	SHA1	Message	Date
Andres Freund	27cc7cd2bc	Reorder EPQ work, to fix rowmark related bugs and improve efficiency. ... In ad0bda5d24 I changed the EvalPlanQual machinery to store substitution tuples in slot, instead of using plain HeapTuples. The main motivation for that was that using HeapTuples will be inefficient for future tableams. But it turns out that that conversion was buggy for non-locking rowmarks - the wrong tuple descriptor was used to create the slot. As a secondary issue 5db6df0c0 changed ExecLockRows() to begin EPQ earlier, to allow to fetch the locked rows directly into the EPQ slots, instead of having to copy tuples around. Unfortunately, as Tom complained, that forces some expensive initialization to happen earlier. As a third issue, the test coverage for EPQ was clearly insufficient. Fixing the first issue is unfortunately not trivial: Non-locked row marks were fetched at the start of EPQ, and we don't have the type information for the rowmarks available at that point. While we could change that, it's not easy. It might be worthwhile to change that at some point, but to fix this bug, it seems better to delay fetching non-locking rowmarks when they're actually needed, rather than eagerly. They're referenced at most once, and in cases where EPQ fails, might never be referenced. Fetching them when needed also increases locality a bit. To be able to fetch rowmarks during execution, rather than initialization, we need to be able to access the active EPQState, as that contains necessary data. To do so move EPQ related data from EState to EPQState, and, only for EStates creates as part of EPQ, reference the associated EPQState from EState. To fix the second issue, change EPQ initialization to allow use of EvalPlanQualSlot() to be used before EvalPlanQualBegin() (but obviously still requiring EvalPlanQualInit() to have been done). As these changes made struct EState harder to understand, e.g. by adding multiple EStates, significantly reorder the members, and add a lot more comments. Also add a few more EPQ tests, including one that fails for the first issue above. More is needed. Reported-By: yi huang Author: Andres Freund Reviewed-By: Tom Lane Discussion: https://postgr.es/m/CAHU7rYZo_C4ULsAx_LAj8az9zqgrD8WDd4hTegDTMM1LMqrBsg@mail.gmail.com https://postgr.es/m/24530.1562686693@sss.pgh.pa.us Backpatch: 12-, where the EPQ changes were introduced	6 years ago
Tom Lane	9e1c9f9594	pgindent run prior to branching v12. ... pgperltidy and reformat-dat-files too, though the latter didn't find anything to change.	6 years ago
Thomas Munro	74b7cc8c02	Fix misleading comment in nodeIndexonlyscan.c. ... The stated reason for acquiring predicate locks on heap pages hasn't existed since commit c01262a8, so fix the comment. Perhaps in a later release we'll also be able to change the code to use tuple locks. Back-patch all the way. Reviewed-by: Ashwin Agrawal Discussion: https://postgr.es/m/CAEepm%3D2GK3FVdnt5V3d%2Bh9njWipCv_fNL%3DwjxyUhzsF%3D0PcbNg%40mail.gmail.com	6 years ago
Heikki Linnakangas	cd96389d71	Fix confusion on different kinds of slots in IndexOnlyScans. ... We used the same slot to store a tuple from the index, and to store a tuple from the table. That's not OK. It worked with the heap, because heapam_getnextslot() stores a HeapTuple to the slot, and doesn't care how large the tts_values/nulls arrays are. But when I played with a toy table AM implementation that used a virtual tuple, it caused memory overruns. In the passing, tidy up comments on the ioss_PscanLen fields.	6 years ago
Tom Lane	8255c7a5ee	Phase 2 pgindent run for v12. ... Switch to 2.1 version of pg_bsd_indent. This formats multiline function declarations "correctly", that is with additional lines of parameter declarations indented to match where the first line's left parenthesis is. Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com	6 years ago
Tom Lane	be76af171c	Initial pgindent run for v12. ... This is still using the 2.0 version of pg_bsd_indent. I thought it would be good to commit this separately, so as to document the differences between 2.0 and 2.1 behavior. Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us	6 years ago
Andres Freund	88e6ad3054	Fix two memory leaks around force-storing tuples in slots. ... As reported by Tom, when ExecStoreMinimalTuple() had to perform a conversion to store the minimal tuple in the slot, it forgot to respect the shouldFree flag, and leaked the tuple into the current memory context if true. Fix that by freeing the tuple in that case. Looking at the relevant code made me (Andres) realize that not having the shouldFree parameter to ExecForceStoreHeapTuple() was a bad idea. Some callers had to locally implement the necessary logic, and in one case it was missing, creating a potential per-group leak in non-hashed aggregation. The choice to not free the tuple in ExecComputeStoredGenerated() is not pretty, but not introduced by this commit - I'll start a separate discussion about it. Reported-By: Tom Lane Discussion: https://postgr.es/m/366.1555382816@sss.pgh.pa.us	6 years ago
Tom Lane	9c703c169a	Make queries' locking of indexes more consistent. ... The assertions added by commit b04aeb0a0 exposed that there are some code paths wherein the executor will try to open an index without holding any lock on it. We do have some lock on the index's table, so it seems likely that there's no fatal problem with this (for instance, the index couldn't get dropped from under us). Still, it's bad practice and we should fix it. To do so, remove the optimizations in ExecInitIndexScan and friends that tried to avoid taking a lock on an index belonging to a target relation, and just take the lock always. In non-bug cases, this will result in no additional shared-memory access, since we'll find in the local lock table that we already have a lock of the desired type; hence, no significant performance degradation should occur. Also, adjust the planner and executor so that the type of lock taken on an index is always identical to the type of lock taken for its table, by relying on the recently added RangeTblEntry.rellockmode field. This avoids some corner cases where that might not have been true before (possibly resulting in extra locking overhead), and prevents future maintenance issues from having multiple bits of logic that all needed to be in sync. In addition, this change removes all core calls to ExecRelationIsTargetRelation, which avoids a possible O(N^2) startup penalty for queries with large numbers of target relations. (We'd probably remove that function altogether, were it not that we advertise it as something that FDWs might want to use.) Also adjust some places in selfuncs.c to not take any lock on indexes they are transiently opening, since we can assume that plancat.c did that already. In passing, change gin_clean_pending_list() to take RowExclusiveLock not AccessShareLock on its target index. Although it's not clear that that's actually a bug, it seemed very strange for a function that's explicitly going to modify the index to use only AccessShareLock. David Rowley, reviewed by Julien Rouhaud and Amit Langote, a bit of further tweaking by me Discussion: https://postgr.es/m/19465.1541636036@sss.pgh.pa.us	7 years ago
Andres Freund	c2fe139c20	tableam: Add and use scan APIs. ... Too allow table accesses to be not directly dependent on heap, several new abstractions are needed. Specifically: 1) Heap scans need to be generalized into table scans. Do this by introducing TableScanDesc, which will be the "base class" for individual AMs. This contains the AM independent fields from HeapScanDesc. The previous heap_{beginscan,rescan,endscan} et al. have been replaced with a table_ version. There's no direct replacement for heap_getnext(), as that returned a HeapTuple, which is undesirable for a other AMs. Instead there's table_scan_getnextslot(). But note that heap_getnext() lives on, it's still used widely to access catalog tables. This is achieved by new scan_begin, scan_end, scan_rescan, scan_getnextslot callbacks. 2) The portion of parallel scans that's shared between backends need to be able to do so without the user doing per-AM work. To achieve that new parallelscan_{estimate, initialize, reinitialize} callbacks are introduced, which operate on a new ParallelTableScanDesc, which again can be subclassed by AMs. As it is likely that several AMs are going to be block oriented, block oriented callbacks that can be shared between such AMs are provided and used by heap. table_block_parallelscan_{estimate, intiialize, reinitialize} as callbacks, and table_block_parallelscan_{nextpage, init} for use in AMs. These operate on a ParallelBlockTableScanDesc. 3) Index scans need to be able to access tables to return a tuple, and there needs to be state across individual accesses to the heap to store state like buffers. That's now handled by introducing a sort-of-scan IndexFetchTable, which again is intended to be subclassed by individual AMs (for heap IndexFetchHeap). The relevant callbacks for an AM are index_fetch_{end, begin, reset} to create the necessary state, and index_fetch_tuple to retrieve an indexed tuple. Note that index_fetch_tuple implementations need to be smarter than just blindly fetching the tuples for AMs that have optimizations similar to heap's HOT - the currently alive tuple in the update chain needs to be fetched if appropriate. Similar to table_scan_getnextslot(), it's undesirable to continue to return HeapTuples. Thus index_fetch_heap (might want to rename that later) now accepts a slot as an argument. Core code doesn't have a lot of call sites performing index scans without going through the systable_* API (in contrast to loads of heap_getnext calls and working directly with HeapTuples). Index scans now store the result of a search in IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the target is not generally a HeapTuple anymore that seems cleaner. To be able to sensible adapt code to use the above, two further callbacks have been introduced: a) slot_callbacks returns a TupleTableSlotOps* suitable for creating slots capable of holding a tuple of the AMs type. table_slot_callbacks() and table_slot_create() are based upon that, but have additional logic to deal with views, foreign tables, etc. While this change could have been done separately, nearly all the call sites that needed to be adapted for the rest of this commit also would have been needed to be adapted for table_slot_callbacks(), making separation not worthwhile. b) tuple_satisfies_snapshot checks whether the tuple in a slot is currently visible according to a snapshot. That's required as a few places now don't have a buffer + HeapTuple around, but a slot (which in heap's case internally has that information). Additionally a few infrastructure changes were needed: I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now internally uses a slot to keep track of tuples. While systable_getnext() still returns HeapTuples, and will so for the foreseeable future, the index API (see 1) above) now only deals with slots. The remainder, and largest part, of this commit is then adjusting all scans in postgres to use the new APIs. Author: Andres Freund, Haribabu Kommi, Alvaro Herrera Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de https://postgr.es/m/20160812231527.GA690404@alvherre.pgsql	7 years ago
Tom Lane	80b9e9c466	Improve performance of index-only scans with many index columns. ... StoreIndexTuple was a loop over index_getattr, which is O(N^2) if the index columns are variable-width, and the performance impact is already quite visible at ten columns. The obvious move is to replace that with a call to index_deform_tuple ... but that's *also* a loop over index_getattr. Improve it to be essentially a clone of heap_deform_tuple. (There are a few other places that loop over all index columns with index_getattr, and perhaps should be changed likewise, but most of them don't seem performance-critical. Anyway, the rest would mostly only be interested in the index key columns, which there aren't likely to be so many of. Wide index tuples are a new thing with INCLUDE.) Konstantin Knizhnik Discussion: https://postgr.es/m/e06b2d27-04fc-5c0e-bb8c-ecd72aa24959@postgrespro.ru	7 years ago
Andres Freund	ad0bda5d24	Store tuples for EvalPlanQual in slots, rather than as HeapTuples. ... For the upcoming pluggable table access methods it's quite inconvenient to store tuples as HeapTuples, as that'd require converting tuples from a their native format into HeapTuples. Instead use slots to manage epq tuples. To fit into that scheme, change the foreign data wrapper callback RefetchForeignRow, to store the tuple in a slot. Insist on using the caller provided slot, so it conveniently can be stored in the corresponding EPQ slot. As there is no in core user of RefetchForeignRow, that change was done blindly, but we plan to test that soon. To avoid duplicating that work for row locks, move row locks to just directly use the EPQ slots - it previously temporarily stored tuples in LockRowsState.lr_curtuples, but that doesn't seem beneficial, given we'd possibly end up with a significant number of additional slots. The behaviour of es_epqTupleSet[rti -1] is now checked by es_epqTupleSlot[rti -1] != NULL, as that is distinguishable from a slot containing an empty tuple. Author: Andres Freund, Haribabu Kommi, Ashutosh Bapat Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de	7 years ago
Andres Freund	0944ec54de	Don't include genam.h from execnodes.h and relscan.h anymore. ... This is the genam.h equivalent of 4c850ecec6 (which removed heapam.h from a lot of other headers). There's still a few header includes of genam.h, but not from central headers anymore. As a few headers are not indirectly included anymore, execnodes.h and relscan.h need a few additional includes. Some of the depended on types were replacable by using the underlying structs, but e.g. for Snapshot in execnodes.h that'd have gotten more invasive than reasonable in this commit. Like the aforementioned commit 4c850ecec6, this requires adding new genam.h includes to a number of backend files, which likely is also required in a few external projects. Author: Andres Freund Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de	7 years ago
Bruce Momjian	97c39498e5	Update copyright for 2019 ... Backpatch-through: certain files through 9.4	7 years ago
Andres Freund	578b229718	Remove WITH OIDS support, change oid catalog column visibility. ... Previously tables declared WITH OIDS, including a significant fraction of the catalog tables, stored the oid column not as a normal column, but as part of the tuple header. This special column was not shown by default, which was somewhat odd, as it's often (consider e.g. pg_class.oid) one of the more important parts of a row. Neither pg_dump nor COPY included the contents of the oid column by default. The fact that the oid column was not an ordinary column necessitated a significant amount of special case code to support oid columns. That already was painful for the existing, but upcoming work aiming to make table storage pluggable, would have required expanding and duplicating that "specialness" significantly. WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0). Remove it. Removing includes: - CREATE TABLE and ALTER TABLE syntax for declaring the table to be WITH OIDS has been removed (WITH (oids[ = true]) will error out) - pg_dump does not support dumping tables declared WITH OIDS and will issue a warning when dumping one (and ignore the oid column). - restoring an pg_dump archive with pg_restore will warn when restoring a table with oid contents (and ignore the oid column) - COPY will refuse to load binary dump that includes oids. - pg_upgrade will error out when encountering tables declared WITH OIDS, they have to be altered to remove the oid column first. - Functionality to access the oid of the last inserted row (like plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed. The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false) for CREATE TABLE) is still supported. While that requires a bit of support code, it seems unnecessary to break applications / dumps that do not use oids, and are explicit about not using them. The biggest user of WITH OID columns was postgres' catalog. This commit changes all 'magic' oid columns to be columns that are normally declared and stored. To reduce unnecessary query breakage all the newly added columns are still named 'oid', even if a table's column naming scheme would indicate 'reloid' or such. This obviously requires adapting a lot code, mostly replacing oid access via HeapTupleGetOid() with access to the underlying Form_pg_*->oid column. The bootstrap process now assigns oids for all oid columns in genbki.pl that do not have an explicit value (starting at the largest oid previously used), only oids assigned later by oids will be above FirstBootstrapObjectId. As the oid column now is a normal column the special bootstrap syntax for oids has been removed. Oids are not automatically assigned during insertion anymore, all backend code explicitly assigns oids with GetNewOidWithIndex(). For the rare case that insertions into the catalog via SQL are called for the new pg_nextoid() function can be used (which only works on catalog tables). The fact that oid columns on system tables are now normal columns means that they will be included in the set of columns expanded by * (i.e. SELECT * FROM pg_class will now include the table's oid, previously it did not). It'd not technically be hard to hide oid column by default, but that'd mean confusing behavior would either have to be carried forward forever, or it'd cause breakage down the line. While it's not unlikely that further adjustments are needed, the scope/invasiveness of the patch makes it worthwhile to get merge this now. It's painful to maintain externally, too complicated to commit after the code code freeze, and a dependency of a number of other patches. Catversion bump, for obvious reasons. Author: Andres Freund, with contributions by John Naylor Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de	7 years ago
Andres Freund	1a0586de36	Introduce notion of different types of slots (without implementing them). ... Upcoming work intends to allow pluggable ways to introduce new ways of storing table data. Accessing those table access methods from the executor requires TupleTableSlots to be carry tuples in the native format of such storage methods; otherwise there'll be a significant conversion overhead. Different access methods will require different data to store tuples efficiently (just like virtual, minimal, heap already require fields in TupleTableSlot). To allow that without requiring additional pointer indirections, we want to have different structs (embedding TupleTableSlot) for different types of slots. Thus different types of slots are needed, which requires adapting creators of slots. The slot that most efficiently can represent a type of tuple in an executor node will often depend on the type of slot a child node uses. Therefore we need to track the type of slot is returned by nodes, so parent slots can create slots based on that. Relatedly, JIT compilation of tuple deforming needs to know which type of slot a certain expression refers to, so it can create an appropriate deforming function for the type of tuple in the slot. But not all nodes will only return one type of slot, e.g. an append node will potentially return different types of slots for each of its subplans. Therefore add function that allows to query the type of a node's result slot, and whether it'll always be the same type (whether it's fixed). This can be queried using ExecGetResultSlotOps(). The scan, result, inner, outer type of slots are automatically inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(), left/right subtrees respectively. If that's not correct for a node, that can be overwritten using new fields in PlanState. This commit does not introduce the actually abstracted implementation of different kind of TupleTableSlots, that will be left for a followup commit. The different types of slots introduced will, for now, still use the same backing implementation. While this already partially invalidates the big comment in tuptable.h, it seems to make more sense to update it later, when the different TupleTableSlot implementations actually exist. Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de	7 years ago
Andres Freund	1ef6bd2954	Don't require return slots for nodes without projection. ... In a lot of nodes the return slot is not required. That can either be because the node doesn't do any projection (say an Append node), or because the node does perform projections but the projection is optimized away because the projection would yield an identical row. Slots aren't that small, especially for wide rows, so it's worthwhile to avoid creating them. It's not possible to just skip creating the slot - it's currently used to determine the tuple descriptor returned by ExecGetResultType(). So separate the determination of the result type from the slot creation. The work previously done internally ExecInitResultTupleSlotTL() can now also be done separately with ExecInitResultTypeTL() and ExecInitResultSlot(). That way nodes that aren't guaranteed to need a result slot, can use ExecInitResultTypeTL() to determine the result type of the node, and ExecAssignScanProjectionInfo() (via ExecConditionalAssignProjectionInfo()) determines that a result slot is needed, it is created with ExecInitResultSlot(). Besides the advantage of avoiding to create slots that then are unused, this is necessary preparation for later patches around tuple table slot abstraction. In particular separating the return descriptor and slot is a prerequisite to allow JITing of tuple deforming with knowledge of the underlying tuple format, and to avoid unnecessarily creating JITed tuple deforming for virtual slots. This commit removes a redundant argument from ExecInitResultTupleSlotTL(). While this commit touches a lot of the relevant lines anyway, it'd normally still not worthwhile to cause breakage, except that aforementioned later commits will touch *all* ExecInitResultTupleSlotTL() callers anyway (but fits worse thematically). Author: Andres Freund Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de	7 years ago
Tom Lane	29ef2b310d	Restore sane locking behavior during parallel query. ... Commit 9a3cebeaa changed things so that parallel workers didn't obtain any lock of their own on tables they access. That was clearly a bad idea, but I'd mistakenly supposed that it was the intended end result of the series of patches for simplifying the executor's lock management. Undo that change in relation_open(), and adjust ExecOpenScanRelation() so that it gets the correct lock if inside a parallel worker. In passing, clean up some more obsolete comments about when locks are acquired. Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp	7 years ago
Tom Lane	9ddef36278	Centralize executor's opening/closing of Relations for rangetable entries. ... Create an array estate->es_relations[] paralleling the es_range_table, and store references to Relations (relcache entries) there, so that any given RT entry is opened and closed just once per executor run. Scan nodes typically still call ExecOpenScanRelation, but ExecCloseScanRelation is no more; relation closing is now done centrally in ExecEndPlan. This is slightly more complex than one would expect because of the interactions with relcache references held in ResultRelInfo nodes. The general convention is now that ResultRelInfo->ri_RelationDesc does not represent a separate relcache reference and so does not need to be explicitly closed; but there is an exception for ResultRelInfos in the es_trig_target_relations list, which are manufactured by ExecGetTriggerResultRel and have to be cleaned up by ExecCleanUpTriggerState. (That much was true all along, but these ResultRelInfos are now more different from others than they used to be.) To allow the partition pruning logic to make use of es_relations[] rather than having its own relcache references, adjust PartitionedRelPruneInfo to store an RT index rather than a relation OID. Amit Langote, reviewed by David Rowley and Jesper Pedersen, some mods by me Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp	7 years ago
Andres Freund	29c94e03c7	Split ExecStoreTuple into ExecStoreHeapTuple and ExecStoreBufferHeapTuple. ... Upcoming changes introduce further types of tuple table slots, in preparation of making table storage pluggable. New storage methods will have different representation of tuples, therefore the slot accessor should refer explicitly to heap tuples. Instead of just renaming the functions, split it into one function that accepts heap tuples not residing in buffers, and one accepting ones in buffers. Previously one function was used for both, but that was a bit awkward already, and splitting will allow us to represent slot types for tuples in buffers and normal memory separately. This is split out from the patch introducing abstract slots, as this largely consists out of mechanical changes. Author: Ashutosh Bapat Reviewed-By: Andres Freund Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de	7 years ago
Heikki Linnakangas	99fdebaf2d	Rephrase a few comments for clarity. ... I was confused by what "intended to be parallel serially" meant, until Robert Haas and David G. Johnston explained it. Rephrase the comment to make it more clear, using David's suggested wording. Discussion: https://www.postgresql.org/message-id/1fec9022-41e8-e484-70ce-2179b08c2092%40iki.fi	7 years ago
Alvaro Herrera	15a8f8caad	Fix IndexOnlyScan counter for heap fetches in parallel mode ... The HeapFetches counter was using a simple value in IndexOnlyScanState, which fails to propagate values from parallel workers; so the counts are wrong when IndexOnlyScan runs in parallel. Move it to Instrumentation, like all the other counters. While at it, change INSERT ON CONFLICT conflicting tuple counter to use the new ntuples2 instead of nfiltered2, which is a blatant misuse. Discussion: https://postgr.es/m/20180409215851.idwc75ct2bzi6tea@alvherre.pgsql	8 years ago
Andres Freund	ad7dbee368	Allow tupleslots to have a fixed tupledesc, use in executor nodes. ... The reason for doing so is that it will allow expression evaluation to optimize based on the underlying tupledesc. In particular it will allow to JIT tuple deforming together with the expression itself. For that expression initialization needs to be moved after the relevant slots are initialized - mostly unproblematic, except in the case of nodeWorktablescan.c. After doing so there's no need for ExecAssignResultType() and ExecAssignResultTypeFromTL() anymore, as all former callers have been converted to create a slot with a fixed descriptor. When creating a slot with a fixed descriptor, tts_values/isnull can be allocated together with the main slot, reducing allocation overhead and increasing cache density a bit. Author: Andres Freund Discussion: https://postgr.es/m/20171206093717.vqdxe5icqttpxs3p@alap3.anarazel.de	8 years ago
Andres Freund	c12693d8f3	Introduce ExecQualAndReset() helper. ... It's a common task to evaluate a qual and reset the corresponding expression context. Currently that requires storing the result of the qual eval, resetting the context, and then reacting on the result. As that's awkward several places only reset the context next time through a node. That's not great, so introduce a helper that evaluates and resets. It's a bit ugly that it currently uses MemoryContextReset() instead of ResetExprContext(), but that seems easier than reordering all of executor.h. Author: Andres Freund Discussion: https://postgr.es/m/20180109222544.f7loxrunqh3xjl5f@alap3.anarazel.de	8 years ago
Tom Lane	2e668c522e	Avoid crash during EvalPlanQual recheck of an inner indexscan. ... Commit 09529a70b changed nodeIndexscan.c and nodeIndexonlyscan.c to postpone initialization of the indexscan proper until the first tuple fetch. It overlooked the question of mark/restore behavior, which means that if some caller attempts to mark the scan before the first tuple fetch, you get a null pointer dereference. The only existing user of mark/restore is nodeMergejoin.c, which (somewhat accidentally) will never attempt to set a mark before the first inner tuple unless the inner child node is a Material node. Hence the case can't arise normally, so it seems sufficient to document the assumption at both ends. However, during an EvalPlanQual recheck, ExecScanFetch doesn't call IndexNext but just returns the jammed-in test tuple. Therefore, if we're doing a recheck in a plan tree with a mergejoin with inner indexscan, it's possible to reach ExecIndexMarkPos with iss_ScanDesc still null, as reported by Guo Xiang Tan in bug #15032. Really, when there's a test tuple supplied during an EPQ recheck, touching the index at all is the wrong thing: rather, the behavior of mark/restore ought to amount to saving and restoring the es_epqScanDone flag. We can avoid finding a place to actually save the flag, for the moment, because given the assumption that no caller will set a mark before fetching a tuple, es_epqScanDone must always be set by the time we try to mark. So the actual behavior change required is just to not reach the index access if a test tuple is supplied. The set of plan node types that need to consider this issue are those that support EPQ test tuples (i.e., call ExecScan()) and also support mark/restore; which is to say, IndexScan, IndexOnlyScan, and perhaps CustomScan. It's tempting to try to fix the problem in one place by teaching ExecMarkPos() itself about EPQ; but ExecMarkPos supports some plan types that aren't Scans, and also it seems risky to make assumptions about what a CustomScan wants to do here. Also, the most likely future change here is to decide that we do need to support marks placed before the first tuple, which would require additional work in IndexScan and IndexOnlyScan in any case. Hence, fix the EPQ issue in nodeIndexscan.c and nodeIndexonlyscan.c, accepting the small amount of code duplicated thereby, and leave it to CustomScan providers to fix this bug if they have it. Back-patch to v10 where commit 09529a70b came in. In earlier branches, the index_markpos() call is a waste of cycles when EPQ is active, but no more than that, so it doesn't seem appropriate to back-patch further. Discussion: https://postgr.es/m/20180126074932.3098.97815@wrigleys.postgresql.org	8 years ago
Bruce Momjian	9d4649ca49	Update copyright for 2018 ... Backpatch-through: certain files through 9.3	8 years ago
Andres Freund	7082e614c0	Provide DSM segment to ExecXXXInitializeWorker functions. ... Previously, executor nodes running in parallel worker processes didn't have access to the dsm_segment object used for parallel execution. In order to support resource management based on DSM segment lifetime, they need that. So create a ParallelWorkerContext object to hold it and pass it to all InitializeWorker functions. Author: Thomas Munro Reviewed-By: Andres Freund Discussion: https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.com	8 years ago
Robert Haas	11c1d555ce	Improve comments for parallel executor estimation functions. ... The previous comment (which was copied as boilerplate from one file to the next) implied that it was the executor node itself which was being serialized, but that's not right. We're not serializing the executor nodes; we're just allowing them to store some additional information in DSM. Adjusts the comment to reflect this. Discussion: http://postgr.es/m/CA+TgmoaHVinxG=3h6qBAsyV8xaDyQwbzK7YZnYfE8nJFMK1=FA@mail.gmail.com	8 years ago
Tom Lane	41b0dd987d	Separate reinitialization of shared parallel-scan state from ExecReScan. ... Previously, the parallel executor logic did reinitialization of shared state within the ExecReScan code for parallel-aware scan nodes. This is problematic, because it means that the ExecReScan call has to occur synchronously (ie, during the parent Gather node's ReScan call). That is swimming very much against the tide so far as the ExecReScan machinery is concerned; the fact that it works at all today depends on a lot of fragile assumptions, such as that no plan node between Gather and a parallel-aware scan node is parameterized. Another objection is that because ExecReScan might be called in workers as well as the leader, hacky extra tests are needed in some places to prevent unwanted shared-state resets. Hence, let's separate this code into two functions, a ReInitializeDSM call and the ReScan call proper. ReInitializeDSM is called only in the leader and is guaranteed to run before we start new workers. ReScan is returned to its traditional function of resetting only local state, which means that ExecReScan's usual habits of delaying or eliminating child rescan calls are safe again. As with the preceding commit 7df2c1f8d, it doesn't seem to be necessary to make these changes in 9.6, which is a good thing because the FDW and CustomScan APIs are impacted. Discussion: https://postgr.es/m/CAA4eK1JkByysFJNh9M349u_nNjqETuEnY_y1VUc_kJiU0bxtaQ@mail.gmail.com	8 years ago
Andres Freund	cc9f08b6b8	Move ExecProcNode from dispatch to function pointer based model. ... This allows us to add stack-depth checks the first time an executor node is called, and skip that overhead on following calls. Additionally it yields a nice speedup. While it'd probably have been a good idea to have that check all along, it has become more important after the new expression evaluation framework in b8d7f053c5 - there's no stack depth check in common paths anymore now. We previously relied on ExecEvalExpr() being executed somewhere. We should move towards that model for further routines, but as this is required for v10, it seems better to only do the necessary (which already is quite large). Author: Andres Freund, Tom Lane Reported-By: Julien Rouhaud Discussion: https://postgr.es/m/22833.1490390175@sss.pgh.pa.us https://postgr.es/m/b0af9eaa-130c-60d0-9e4e-7a135b1e0c76@dalibo.com	8 years ago
Andres Freund	d47cfef711	Move interrupt checking from ExecProcNode() to executor nodes. ... In a followup commit ExecProcNode(), and especially the large switch it contains, will largely be replaced by a function pointer directly to the correct node. The node functions will then get invoked by a thin inline function wrapper. To avoid having to include miscadmin.h in headers - CHECK_FOR_INTERRUPTS() - move the interrupt checks into the individual executor routines. While looking through all executor nodes, I noticed a number of arguably missing interrupt checks, add these too. Author: Andres Freund, Tom Lane Reviewed-By: Tom Lane Discussion: https://postgr.es/m/22833.1490390175@sss.pgh.pa.us	8 years ago
Tom Lane	382ceffdf7	Phase 3 of pgindent updates. ... Don't move parenthesized lines to the left, even if that means they flow past the right margin. By default, BSD indent lines up statement continuation lines that are within parentheses so that they start just to the right of the preceding left parenthesis. However, traditionally, if that resulted in the continuation line extending to the right of the desired right margin, then indent would push it left just far enough to not overrun the margin, if it could do so without making the continuation line start to the left of the current statement indent. That makes for a weird mix of indentations unless one has been completely rigid about never violating the 80-column limit. This behavior has been pretty universally panned by Postgres developers. Hence, disable it with indent's new -lpl switch, so that parenthesized lines are always lined up with the preceding left paren. This patch is much less interesting than the first round of indent changes, but also bulkier, so I thought it best to separate the effects. Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us	8 years ago
Tom Lane	d466335064	Don't be so trusting that shm_toc_lookup() will always succeed. ... Given the possibility of race conditions and so on, it seems entirely unsafe to just assume that shm_toc_lookup() always finds the key it's looking for --- but that was exactly what all but one call site were doing. To fix, add a "bool noError" argument, similarly to what we have in many other functions, and throw an error on an unexpected lookup failure. Remove now-redundant Asserts that a rather random subset of call sites had. I doubt this will throw any light on buildfarm member lorikeet's recent failures, because if an unnoticed lookup failure were involved, you'd kind of expect a null-pointer-dereference crash rather than the observed symptom. But you never know ... and this is better coding practice even if it never catches anything. Discussion: https://postgr.es/m/9697.1496675981@sss.pgh.pa.us	8 years ago
Andres Freund	b8d7f053c5	Faster expression evaluation and targetlist projection. ... This replaces the old, recursive tree-walk based evaluation, with non-recursive, opcode dispatch based, expression evaluation. Projection is now implemented as part of expression evaluation. This both leads to significant performance improvements, and makes future just-in-time compilation of expressions easier. The speed gains primarily come from: - non-recursive implementation reduces stack usage / overhead - simple sub-expressions are implemented with a single jump, without function calls - sharing some state between different sub-expressions - reduced amount of indirect/hard to predict memory accesses by laying out operation metadata sequentially; including the avoidance of nearly all of the previously used linked lists - more code has been moved to expression initialization, avoiding constant re-checks at evaluation time Future just-in-time compilation (JIT) has become easier, as demonstrated by released patches intended to be merged in a later release, for primarily two reasons: Firstly, due to a stricter split between expression initialization and evaluation, less code has to be handled by the JIT. Secondly, due to the non-recursive nature of the generated "instructions", less performance-critical code-paths can easily be shared between interpreted and compiled evaluation. The new framework allows for significant future optimizations. E.g.: - basic infrastructure for to later reduce the per executor-startup overhead of expression evaluation, by caching state in prepared statements. That'd be helpful in OLTPish scenarios where initialization overhead is measurable. - optimizing the generated "code". A number of proposals for potential work has already been made. - optimizing the interpreter. Similarly a number of proposals have been made here too. The move of logic into the expression initialization step leads to some backward-incompatible changes: - Function permission checks are now done during expression initialization, whereas previously they were done during execution. In edge cases this can lead to errors being raised that previously wouldn't have been, e.g. a NULL array being coerced to a different array type previously didn't perform checks. - The set of domain constraints to be checked, is now evaluated once during expression initialization, previously it was re-built every time a domain check was evaluated. For normal queries this doesn't change much, but e.g. for plpgsql functions, which caches ExprStates, the old set could stick around longer. The behavior around might still change. Author: Andres Freund, with significant changes by Tom Lane, changes by Heikki Linnakangas Reviewed-By: Tom Lane, Heikki Linnakangas Discussion: https://postgr.es/m/20161206034955.bh33paeralxbtluv@alap3.anarazel.de	9 years ago
Robert Haas	09529a70bb	Fix parallel index and index-only scans to fall back to serial. ... Parallel executor nodes can't assume that parallel execution will happen in every case where the plan calls for it, because it might not work out that way. However, parallel index scan and parallel index-only scan failed to do the right thing here. Repair. Amit Kapila, per a report from me. Discussion: http://postgr.es/m/CAA4eK1Kq5qb_u2AOoda5XBB91vVWz90w=LgtRLgsssriS8pVTw@mail.gmail.com	9 years ago
Tom Lane	9b88f27cb4	Allow index AMs to return either HeapTuple or IndexTuple format during IOS. ... Previously, only IndexTuple format was supported for the output data of an index-only scan. This is fine for btree, which is just returning a verbatim index tuple anyway. It's not so fine for SP-GiST, which can return reconstructed data that's much larger than a page. To fix, extend the index AM API so that index-only scan data can be returned in either HeapTuple or IndexTuple format. There's other ways we could have done it, but this way avoids an API break for index AMs that aren't concerned with the issue, and it costs little except a couple more fields in IndexScanDescs. I changed both GiST and SP-GiST to use the HeapTuple method. I'm not very clear on whether GiST can reconstruct data that's too large for an IndexTuple, but that seems possible, and it's not much of a code change to fix. Per a complaint from Vik Fearing. Reviewed by Jason Li. Discussion: https://postgr.es/m/49527f79-530d-0bfe-3dad-d183596afa92@2ndquadrant.fr	9 years ago
Robert Haas	0414b26bac	Add optimizer and executor support for parallel index-only scans. ... Commit 5262f7a4fc added similar support for parallel index scans; this extends that work to index-only scans. As with parallel index scans, this requires support from the index AM, so currently parallel index-only scans will only be possible for btree indexes. Rafia Sabih, reviewed and tested by Rahila Syed, Tushar Ahuja, and Amit Kapila Discussion: http://postgr.es/m/CAOGQiiPEAs4C=TBp0XShxBvnWXuzGL2u++Hm1=qnCpd6_Mf8Fw@mail.gmail.com	9 years ago
Andres Freund	ea15e18677	Remove obsoleted code relating to targetlist SRF evaluation. ... Since 69f4b9c plain expression evaluation (and thus normal projection) can't return sets of tuples anymore. Thus remove code dealing with that possibility. This will require adjustments in external code using ExecEvalExpr()/ExecProject() - that should neither be hard nor very common. Author: Andres Freund and Tom Lane Discussion: https://postgr.es/m/20160822214023.aaxz5l4igypowyri@alap3.anarazel.de	9 years ago
Bruce Momjian	1d25779284	Update copyright via script for 2017	9 years ago
Robert Haas	a892234f83	Change the format of the VM fork to add a second bit per page. ... The new bit indicates whether every tuple on the page is already frozen. It is cleared only when the all-visible bit is cleared, and it can be set only when we vacuum a page and find that every tuple on that page is both visible to every transaction and in no need of any future vacuuming. A future commit will use this new bit to optimize away full-table scans that would otherwise be triggered by XID wraparound considerations. A page which is merely all-visible must still be scanned in that case, but a page which is all-frozen need not be. This commit does not attempt that optimization, although that optimization is the goal here. It seems better to get the basic infrastructure in place first. Per discussion, it's very desirable for pg_upgrade to automatically migrate existing VM forks from the old format to the new format. That, too, will be handled in a follow-on patch. Masahiko Sawada, reviewed by Kyotaro Horiguchi, Fujii Masao, Amit Kapila, Simon Riggs, Andres Freund, and others, and substantially revised by me.	10 years ago
Bruce Momjian	ee94300446	Update copyright for 2016 ... Backpatch certain files through 9.1	10 years ago
Bruce Momjian	807b9e0dff	pgindent run for 9.5	10 years ago
Tom Lane	f84c8601d6	Add error check for lossy distance functions in index-only scans. ... Maybe we should actually support this, but for the moment let's just throw an error if the opclass tries it.	10 years ago
Tom Lane	1a8a4e5cde	Code review for foreign/custom join pushdown patch. ... Commit e7cb7ee145 included some design decisions that seem pretty questionable to me, and there was quite a lot of stuff not to like about the documentation and comments. Clean up as follows: * Consider foreign joins only between foreign tables on the same server, rather than between any two foreign tables with the same underlying FDW handler function. In most if not all cases, the FDW would simply have had to apply the same-server restriction itself (far more expensively, both for lack of caching and because it would be repeated for each combination of input sub-joins), or else risk nasty bugs. Anyone who's really intent on doing something outside this restriction can always use the set_join_pathlist_hook. * Rename fdw_ps_tlist/custom_ps_tlist to fdw_scan_tlist/custom_scan_tlist to better reflect what they're for, and allow these custom scan tlists to be used even for base relations. * Change make_foreignscan() API to include passing the fdw_scan_tlist value, since the FDW is required to set that. Backwards compatibility doesn't seem like an adequate reason to expect FDWs to set it in some ad-hoc extra step, and anyway existing FDWs can just pass NIL. * Change the API of path-generating subroutines of add_paths_to_joinrel, and in particular that of GetForeignJoinPaths and set_join_pathlist_hook, so that various less-used parameters are passed in a struct rather than as separate parameter-list entries. The objective here is to reduce the probability that future additions to those parameter lists will result in source-level API breaks for users of these hooks. It's possible that this is even a small win for the core code, since most CPU architectures can't pass more than half a dozen parameters efficiently anyway. I kept root, joinrel, outerrel, innerrel, and jointype as separate parameters to reduce code churn in joinpath.c --- in particular, putting jointype into the struct would have been problematic because of the subroutines' habit of changing their local copies of that variable. * Avoid ad-hocery in ExecAssignScanProjectionInfo. It was probably all right for it to know about IndexOnlyScan, but if the list is to grow we should refactor the knowledge out to the callers. * Restore nodeForeignscan.c's previous use of the relcache to avoid extra GetFdwRoutine lookups for base-relation scans. * Lots of cleanup of documentation and missed comments. Re-order some code additions into more logical places.	10 years ago
Bruce Momjian	4baaf863ec	Update copyright for 2015 ... Backpatch certain files through 9.0	11 years ago
Jeff Davis	35c0cd3b05	Improve comment for tricky aspect of index-only scans. ... Index-only scans avoid taking a lock on the VM buffer, which would cause a lot of contention. To be correct, that requires some intricate assumptions that weren't completely documented in the previous comment. Reviewed by Robert Haas.	12 years ago
Bruce Momjian	0a78320057	pgindent run for 9.4 ... This includes removing tabs after periods in C comments, which was applied to back branches, so this change should not effect backpatching.	12 years ago
Bruce Momjian	7e04792a1c	Update copyright for 2014 ... Update all files in head, and files COPYRIGHT and legal.sgml in all back branches.	12 years ago
Tom Lane	5194024d72	Incidental cleanup of matviews code. ... Move checking for unscannable matviews into ExecOpenScanRelation, which is a better place for it first because the open relation is already available (saving a relcache lookup cycle), and second because this eliminates the problem of telling the difference between rangetable entries that will or will not be scanned by the query. In particular we can get rid of the not-terribly-well-thought-out-or-implemented isResultRel field that the initial matviews patch added to RangeTblEntry. Also get rid of entirely unnecessary scannability check in the rewriter, and a bogus decision about whether RefreshMatViewStmt requires a parse-time snapshot. catversion bump due to removal of a RangeTblEntry field, which changes stored rules.	13 years ago
Bruce Momjian	bd61a623ac	Update copyrights for 2013 ... Fully update git head, and update back branches in ./COPYRIGHT and legal.sgml files.	13 years ago
Kevin Grittner	cdf91edba9	Fix serializable mode with index-only scans. ... Serializable Snapshot Isolation used for serializable transactions depends on acquiring SIRead locks on all heap relation tuples which are used to generate the query result, so that a later delete or update of any of the tuples can flag a read-write conflict between transactions. This is normally handled in heapam.c, with tuple level locking. Since an index-only scan avoids heap access in many cases, building the result from the index tuple, the necessary predicate locks were not being acquired for all tuples in an index-only scan. To prevent problems with tuple IDs which are vacuumed and re-used while the transaction still matters, the xmin of the tuple is part of the tag for the tuple lock. Since xmin is not available to the index-only scan for result rows generated from the index tuples, it is not possible to acquire a tuple-level predicate lock in such cases, in spite of having the tid. If we went to the heap to get the xmin value, it would no longer be an index-only scan. Rather than prohibit index-only scans under serializable transaction isolation, we acquire an SIRead lock on the page containing the tuple, when it was not necessary to visit the heap for other reasons. Backpatch to 9.2. Kevin Grittner and Tom Lane	13 years ago