over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
ReadOrZeroBuffer to fetch pages from beyond physical EOF. This would
usually work, but would cause problems for md.c if writes occurred
beyond a segment boundary when the previous segment file hadn't been
fully extended.
from the WAL data, don't bother to physically read it; just have bufmgr.c
return a zeroed-out buffer instead. This speeds recovery significantly,
and also avoids unnecessary failures when a page-to-be-overwritten has corrupt
page headers on disk. This replaces a former kluge that accomplished the
latter by pretending zero_damaged_pages was always ON during WAL recovery;
which was OK when the kluge was put in, but is unsafe when restoring a WAL
log that was written with full_page_writes off.
Heikki Linnakangas
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
wrong answer, as has been seen to occur with a buggy Linux kernel. Not
really our bug, but it's a simple test in a seldom-used control path,
so might as well have a defense.
after an error during VACUUM. We have a PG_TRY block anyway around the only
call sites, so just reset it in the CATCH clause instead of having
AtEOXact_Buffers blindly do it during xact end. I think the old code was
actively wrong for the case of a failure during ANALYZE inside a
subtransaction --- the flag wouldn't get cleared until main transaction end.
Probably not worth back-patching though.
If a process abandons a wait in LockBufferForCleanup (in practice,
only happens if someone cancels a VACUUM) just before someone else
sends it a signal indicating the buffer is available, it was possible
for the wakeup to remain in the process' semaphore, causing misbehavior
next time the process waited for an lmgr lock. Rather than try to
prevent the race condition directly, it seems best to make the lock
manager robust against leftover wakeups, by having it repeat waiting
on the semaphore if the lock has not actually been granted or denied
yet.
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
This commit doesn't make much functional change, but it does eliminate some
duplicated code --- for instance, PageIsNew tests are now done inside
XLogReadBuffer rather than by each caller.
The GIST xlog code still needs a lot of love, but I'll worry about that
separately.
checkpoint in the bgwriter. This forestalls overflow of the fsync request
queue, which is not fatal but causes considerable performance degradation
when it occurs (because backends then have to do their own fsyncs). Per
patch from Itagaki Takahiro, modified a little bit by me.
the relation but it finds a pre-existing valid buffer. The buffer does not
correspond to any page known to the kernel, so we *must* do smgrextend to
ensure that the space becomes allocated. The 7.x branches all do this
correctly, but the corner case got lost somewhere during 8.0 bufmgr rewrites.
(My fault no doubt :-( ... I think I assumed that such a buffer must be
not-BM_VALID, which is not so.)
in favor of having just one set of macros that don't do HOLD/RESUME_INTERRUPTS
(hence, these correspond to the old SpinLockAcquire_NoHoldoff case).
Given our coding rules for spinlock use, there is no reason to allow
CHECK_FOR_INTERRUPTS to be done while holding a spinlock, and also there
is no situation where ImmediateInterruptOK will be true while holding a
spinlock. Therefore doing HOLD/RESUME_INTERRUPTS while taking/releasing a
spinlock is just a waste of cycles. Qingqing Zhou and Tom Lane.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
that was added to localbuf.c in 8.1; therefore, applying it to a temp table
left corrupt lookup state in memory. The only case where this had a
significant chance of causing problems was an ON COMMIT DELETE ROWS temp
table; the other possible paths left bogus state that was unlikely to
be used again. Per report from Csaba Nagy.
advance its usage_count. This includes writes of dirty buffers triggered
by bgwriter, checkpoint, or FlushRelationBuffers, as well as various
corner cases that really ought not count as accesses to the page.
Should make for some marginal improvement in the quality of our decisions
about when to recycle buffers. Per suggestion from ITAGAKI Takahiro.
pointers, to ensure that compilers won't rearrange accesses to occur
while we're not holding the buffer header spinlock. It's probably
not necessary to mark volatile in every single place in bufmgr.c,
but better safe than sorry. Per trouble report from Kevin Grittner.
computation. On modern machines this is as fast if not faster, and we
don't have to clog the CPU's L2 cache with a tens-of-KB pointer array.
If we ever decide to adopt a more dynamic allocation method for shared
buffers, we'll probably have to revert this patch, but in the meantime
we might as well save a few bytes and nanoseconds. Per Qingqing Zhou.
exit, instead of trying to take shortcuts. Introduce some additional
shutdown callback routines to eliminate kluges like having ProcKill
be responsible for shutting down the buffer manager. Ensure that the
order of operations during shutdown is predictable and what you would
expect given the module layering.
doesn't block the bgwriter from making progress writing out other buffers.
This was a hard problem in the context of the ARC/2Q design, but it's
trivial in the context of clock sweep ... just advance the sweep counter
before we try to write not after.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
to write out data that we are about to tell the filesystem to drop.
smgr_internal_unlink already had a DropRelFileNodeBuffers call to
get rid of dead buffers without a write after it's no longer possible
to roll back the deleting transaction. Adding a similar call in
smgrtruncate simplifies callers and makes the overall division of
labor clearer. This patch removes the former behavior that VACUUM
would write all dirty buffers of a relation unconditionally.
the freelist, plus per-buffer spinlocks that protect access to individual
shared buffer headers. This requires abandoning a global freelist (since
the freelist is a global contention point), which shoots down ARC and 2Q
as well as plain LRU management. Adopt a clock sweep algorithm instead.
Preliminary results show substantial improvement in multi-backend situations.
is the minimum required fix. I want to look next at taking advantage of
it by simplifying the message semantics in the shared inval message queue,
but that part can be held over for 8.1 if it turns out too ugly.
share lock on a buffer being written out before releasing BufMgrLock in
the BufferAlloc code path; if we do it later we might block on someone
who's re-pinned the buffer. I believe this is only an issue for BufferAlloc
and not the other places that call FlushBuffer. BufferSync must continue
to do it the old way since it may well be trying to write buffers that
other backends have pinned; but it should not be holding any conflicting
locks. FlushRelationBuffers is okay since it's got exclusive lock at the
relation level.
This does not disable the bgwriter process: it still has to wake up often
enough to collect fsync requests from backends in a timely fashion. But
it responds to the recent gripe about not being able to prevent the disk
from being spun up constantly.
pins at end of transaction, and reduce AtEOXact_Buffers to an Assert
cross-check that this was done correctly. When not USE_ASSERT_CHECKING,
AtEOXact_Buffers is a complete no-op. This gets rid of an O(NBuffers)
bottleneck during transaction commit/abort, which recent testing has shown
becomes significant above a few tens of thousands of shared buffers.
(if any) currently waited for by LockBufferForCleanup(), which is all
that we were using it for anymore. Saves some space and eliminates
proportional-to-NBuffers slowdown in UnlockBuffers().
http://archives.postgresql.org/pgsql-hackers/2004-10/msg00464.php.
This fix is intended to be permanent: it moves the responsibility for
calling SetBufferCommitInfoNeedsSave() into the tqual.c routines,
eliminating the requirement for callers to test whether t_infomask changed.
Also, tighten validity checking on buffer IDs in bufmgr.c --- several
routines were paranoid about out-of-range shared buffer numbers but not
about out-of-range local ones, which seems a tad pointless.
keep track of portal-related resources separately from transaction-related
resources. This allows cursors to work in a somewhat sane fashion with
nested transactions. For now, cursor behavior is non-subtransactional,
that is a cursor's state does not roll back if you abort a subtransaction
that fetched from the cursor. We might want to change that later.
Tom Lane