we regenerate the SQL query text not merely the plan derived from it. This
is needed to handle contingencies such as renaming of a table or column
used in an FK. Pre-8.3, such cases worked despite the lack of replanning
(because the cached plan needn't actually change), so this is a regression.
Per bug #4417 from Benjamin Bihler.
checks in ExecIndexBuildScanKeys() that were inadequate anyway: it's better
to verify the correct varno on an expected index key, not just reject OUTER
and INNER.
This makes the entire current contents of nodeFuncs.c dead code. I'll be
replacing it with some other stuff later, as per recent proposal.
subqueries into the same thing you'd have gotten from IN (except always with
unknownEqFalse = true, so as to get the proper semantics for an EXISTS).
I believe this fixes the last case within CVS HEAD in which an EXISTS could
give worse performance than an equivalent IN subquery.
The tricky part of this is that if the upper query probes the EXISTS for only
a few rows, the hashing implementation can actually be worse than the default,
and therefore we need to make a cost-based decision about which way to use.
But at the time when the planner generates plans for subqueries, it doesn't
really know how many times the subquery will be executed. The least invasive
solution seems to be to generate both plans and postpone the choice until
execution. Therefore, in a query that has been optimized this way, EXPLAIN
will show two subplans for the EXISTS, of which only one will actually get
executed.
There is a lot more that could be done based on this infrastructure: in
particular it's interesting to consider switching to the hash plan if we start
out using the non-hashed plan but find a lot more upper rows going by than we
expected. I have therefore left some minor inefficiencies in place, such as
initializing both subplans even though we will currently only use one.
filter to be used when INSERT or SELECT INTO has a plan that returns raw
disk tuples. The virtual-tuple-slot optimizations that were put in place
awhile ago mean that ExecInsert has to do ExecMaterializeSlot, and that
already copies the tuple if it's raw (and does so more efficiently than
a junk filter, too). So get rid of that logic. This in turn means that
we can throw away ExecMayReturnRawTuples, which wasn't used for any other
purpose, and was always a kluge anyway.
In passing, move a couple of SELECT-INTO-specific fields out of EState
and into the private state of the SELECT INTO DestReceiver, as was foreseen
in an old comment there. Also make intorel_receive use ExecMaterializeSlot
not ExecCopySlotTuple, for consistency with ExecInsert and to possibly save
a tuple copy step in some cases.
file portability/instr_time.h, and add a couple more macros to eliminate
some abstraction leakage we formerly had. Also update psql to use this
header instead of its own copy of nearly the same code.
This commit in itself is just code cleanup and shouldn't change anything.
It lays some groundwork for the upcoming function-stats patch, though.
no particular need to do get_op_opfamily_properties() while building an
indexscan plan. Postpone that lookup until executor start. This simplifies
createplan.c a lot more than it complicates nodeIndexscan.c, and makes things
more uniform since we already had to do it that way for RowCompare
expressions. Should be a bit faster too, at least for plans that aren't
re-used many times, since we avoid palloc'ing and perhaps copying the
intermediate list data structure.
that is commands that have out-of-line parameters but the plan is prepared
assuming that the parameter values are constants. This is needed for the
plpgsql EXECUTE USING patch, but will probably have use elsewhere.
This commit includes the SPI functions and documentation, but no callers
nor regression tests. The upcoming EXECUTE USING patch will provide
regression-test coverage. I thought committing this separately made
sense since it's logically a distinct feature.
are declared to return set, and consist of just a single SELECT. We
can replace the FROM-item with a sub-SELECT and then optimize much as
if we were dealing with a view. Patch from Richard Rowell, cleaned up
by me.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
are not one of the query's defined result relations, but nonetheless have
triggers fired against them while the query is active. This was formerly
impossible but can now occur because of my recent patch to fix the firing
order for RI triggers. Caching a ResultRelInfo avoids duplicating work by
repeatedly opening and closing the same relation, and also allows EXPLAIN
ANALYZE to "see" and report on these extra triggers. Use the same mechanism
to cache open relations when firing deferred triggers at transaction shutdown;
this replaces the former one-element-cache strategy used in that case, and
should improve performance a bit when there are deferred triggers on a number
of relations.
row within one query: we were firing check triggers before all the updates
were done, leading to bogus failures. Fix by making the triggers queued by
an RI update go at the end of the outer query's trigger event list, thereby
effectively making the processing "breadth-first". This was indeed how it
worked pre-8.0, so the bug does not occur in the 7.x branches.
Per report from Pavel Stehule.
with a plpgsql-defined cursor. The underlying mechanism for this is that the
main SQL engine will now take "WHERE CURRENT OF $n" where $n is a refcursor
parameter. Not sure if we should document that fact or consider it an
implementation detail. Per discussion with Pavel Stehule.
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
for each temp file, rather than once per sort or hashjoin; this allows
spreading the data of a large sort or join across multiple tablespaces.
(I remain dubious that this will make any difference in practice, but certain
people insisted.) Arrange to cache the results of parsing the GUC variable
instead of recomputing from scratch on every demand, and push usage of the
cache down to the bottommost fd.c level.
tablespace(s) in which to store temp tables and temporary files. This is a
list to allow spreading the load across multiple tablespaces (a random list
element is chosen each time a temp object is to be created). Temp files are
not stored in per-database pgsql_tmp/ directories anymore, but per-tablespace
directories.
Jaime Casanova and Albert Cervera, with review by Bernd Helmle and Tom Lane.
selecting power-of-2, rather than prime, numbers of buckets in hash joins.
If the hash functions are doing their jobs properly by making all hash bits
equally random, this is good enough, and it saves expensive integer division
and modulus operations.
access to the planner's cursor-related planning options, and provide new
FETCH/MOVE routines that allow access to the full power of those commands.
Small refactoring of planner(), pg_plan_query(), and pg_plan_queries()
APIs to make it convenient to pass the planning options down from SPI.
This is the core-code portion of Pavel Stehule's patch for scrollable
cursor support in plpgsql; I'll review and apply the plpgsql changes
separately.
Vadim had included this restriction in the original design of the SPI code,
but I'm darned if I can see a reason for it.
I left the macro definition of SPI_ERROR_CURSOR in place, so as not to
needlessly break any SPI callers that are checking for it, but that code
will never actually be returned anymore.
uses SPI plans, this finally fixes the ancient gotcha that you can't
drop and recreate a temp table used by a plpgsql function.
Along the way, clean up SPI's API a little bit by declaring SPI plan
pointers as "SPIPlanPtr" instead of "void *". This is cosmetic but
helps to forestall simple programming mistakes. (I have changed some
but not all of the callers to match; there are still some "void *"'s
in contrib and the PL's. This is intentional so that we can see if
anyone's compiler complains about it.)
parent query's EState. Now that there's a single flat rangetable for both
the main plan and subplans, there's no need anymore for a separate EState,
and removing it allows cleaning up some crufty code in nodeSubplan.c and
nodeSubqueryscan.c. Should be a tad faster too, although any difference
will probably be hard to measure. This is the last bit of subsidiary
mop-up work from changing to a flat rangetable.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
WHERE clauses. createplan.c is now willing to stick a gating Result node
almost anywhere in the plan tree, and in particular one can wind up directly
underneath a MergeJoin node. This means it had better be willing to handle
Mark/Restore. Fortunately, that's trivial in such cases, since we can just
pass off the call to the input node (which the planner has previously ensured
can handle Mark/Restore). Per report from Phil Frost.
that aren't turned into true joins). Since this is the last missing bit of
infrastructure, go ahead and fill out the hash integer_ops and float_ops
opfamilies with cross-type operators. The operator family project is now
DONE ... er, except for documentation ...
made query plan. Use of ALTER COLUMN TYPE creates a hazard for cached
query plans: they could contain Vars that claim a column has a different
type than it now has. Fix this by checking during plan startup that Vars
at relation scan level match the current relation tuple descriptor. Since
at that point we already have at least AccessShareLock, we can be sure the
column type will not change underneath us later in the query. However,
since a backend's locks do not conflict against itself, there is still a
hole for an attacker to exploit: he could try to execute ALTER COLUMN TYPE
while a query is in progress in the current backend. Seal that hole by
rejecting ALTER TABLE whenever the target relation is already open in
the current backend.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0556
Hashing for aggregation purposes still needs work, so it's not time to
mark any cross-type operators as hashable for general use, but these cases
work if the operators are so marked by hand in the system catalogs.
match because they contain a null join key (and the join operator is
known strict). Improves performance significantly when the inner
relation contains a lot of nulls, as per bug #2930.
which comparison operators to use for plan nodes involving tuple comparison
(Agg, Group, Unique, SetOp). Formerly the executor looked up the default
equality operator for the datatype, which was really pretty shaky, since it's
possible that the data being fed to the node is sorted according to some
nondefault operator class that could have an incompatible idea of equality.
The planner knows what it has sorted by and therefore can provide the right
equality operator to use. Also, this change moves a couple of catalog lookups
out of the executor and into the planner, which should help startup time for
pre-planned queries by some small amount. Modify the planner to remove some
other cavalier assumptions about always being able to use the default
operators. Also add "nulls first/last" info to the Plan node for a mergejoin
--- neither the executor nor the planner can cope yet, but at least the API is
in place.
involving HashAggregate over SubqueryScan (this is the known case, there
may well be more). The bug is only latent in releases before 8.2 since they
didn't try to access tupletable slots' descriptors during ExecDropTupleTable.
The least bogus fix seems to be to make subqueries share the parent query's
memory context, so that tupdescs they create will have the same lifespan as
those of the parent query. There are comments in the code envisioning going
even further by not having a separate child EState at all, but that will
require rethinking executor access to range tables, which I don't want to
tackle right now. Per bug report from Jean-Pierre Pelletier.
by name on each and every row processed. Profiling suggests this may
buy a percent or two for simple UPDATE scenarios, which isn't huge,
but when it's so easy to get ...
Fix all the standard PLs to be able to return tuples from FOO_RETURNING
statements as well as utility statements that return tuples. Also,
fix oversight that SPI_processed wasn't set for a utility statement
returning tuples. Per recent discussion.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
that's shorter-lived than the expression state being evaluated in it really
doesn't work :-( --- we end up with fn_extra caches getting deleted while
still in use. Rather than abandon the notion of caching expression state
across domain_in calls altogether, I chose to make domain_in a bit cozier
with ExprContext. All we really need for evaluating variable-free
expressions is an ExprContext, not an EState, so I invented the notion of a
"standalone" ExprContext. domain_in can prevent resource leakages by doing
a ReScanExprContext on this rather than having to free it entirely; so we
can make the ExprContext have the same lifespan (and particularly the same
per_query memory context) as the expression state structs.
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
Tom Lane