Instead of joining two partitioned tables in their entirety we can, if
it is an equi-join on the partition keys, join the matching partitions
individually. This involves teaching the planner about "other join"
rels, which are related to regular join rels in the same way that
other member rels are related to baserels. This can use significantly
more CPU time and memory than regular join planning, because there may
now be a set of "other" rels not only for every base relation but also
for every join relation. In most practical cases, this probably
shouldn't be a problem, because (1) it's probably unusual to join many
tables each with many partitions using the partition keys for all
joins and (2) if you do that scenario then you probably have a big
enough machine to handle the increased memory cost of planning and (3)
the resulting plan is highly likely to be better, so what you spend in
planning you'll make up on the execution side. All the same, for now,
turn this feature off by default.
Currently, we can only perform joins between two tables whose
partitioning schemes are absolutely identical. It would be nice to
cope with other scenarios, such as extra partitions on one side or the
other with no match on the other side, but that will have to wait for
a future patch.
Ashutosh Bapat, reviewed and tested by Rajkumar Raghuwanshi, Amit
Langote, Rafia Sabih, Thomas Munro, Dilip Kumar, Antonin Houska, Amit
Khandekar, and by me. A few final adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRfQ8GrQvzp3jA2wnLqrHmaXna-urjm_UY9BqXj=EaDTSA@mail.gmail.com
Discussion: http://postgr.es/m/CAFjFpRcitjfrULr5jfuKWRPsGUX0LQ0k8-yG0Qw2+1LBGNpMdw@mail.gmail.com
Haribabu Kommi, reviewed by Dilip Kumar and Rafia Sabih. Various
cosmetic changes by me to explain why this appears to be safe but
allowing inserts in parallel mode in general wouldn't be. Also, I
removed the REFRESH MATERIALIZED VIEW case from Haribabu's patch,
since I'm not convinced that case is OK, and hacked on the
documentation somewhat.
Discussion: http://postgr.es/m/CAJrrPGdo5bak6qnPWe8Kpi8g_jfQEs-G4SYmG9y+OFaw2-dPvA@mail.gmail.com
A lot of semi-internal code just prints out numeric SPI error codes,
which is not very helpful. We already have an API function to convert
the codes to a string, so let's make more use of that.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Not much to say about this; does what it says on the tin.
However, formerly, if there was a column list then the ANALYZE action was
implied; now it must be specified, or you get an error. This is because
it would otherwise be a bit unclear what the user meant if some tables
have column lists and some don't.
Nathan Bossart, reviewed by Michael Paquier and Masahiko Sawada, with some
editorialization by me
Discussion: https://postgr.es/m/E061A8E3-5E3D-494D-94F0-E8A9B312BBFC@amazon.com
Document better how to create custom collations and what locale strings
ICU accepts. Explain the ICU examples in more detail. Also update the
text on the CREATE COLLATION reference page a bit to take ICU more into
account.
Allowing arrays with a domain type as their element type was left un-done
in the original domain patch, but not for any very good reason. This
omission leads to such surprising results as array_agg() not working on
a domain column, because the parser can't identify a suitable output type
for the polymorphic aggregate.
In order to fix this, first clean up the APIs of coerce_to_domain() and
some internal functions in parse_coerce.c so that we consistently pass
around a CoercionContext along with CoercionForm. Previously, we sometimes
passed an "isExplicit" boolean flag instead, which is strictly less
information; and coerce_to_domain() didn't even get that, but instead had
to reverse-engineer isExplicit from CoercionForm. That's contrary to the
documentation in primnodes.h that says that CoercionForm only affects
display and not semantics. I don't think this change fixes any live bugs,
but it makes things more consistent. The main reason for doing it though
is that now build_coercion_expression() receives ccontext, which it needs
in order to be able to recursively invoke coerce_to_target_type().
Next, reimplement ArrayCoerceExpr so that the node does not directly know
any details of what has to be done to the individual array elements while
performing the array coercion. Instead, the per-element processing is
represented by a sub-expression whose input is a source array element and
whose output is a target array element. This simplifies life in
parse_coerce.c, because it can build that sub-expression by a recursive
invocation of coerce_to_target_type(). The executor now handles the
per-element processing as a compiled expression instead of hard-wired code.
The main advantage of this is that we can use a single ArrayCoerceExpr to
handle as many as three successive steps per element: base type conversion,
typmod coercion, and domain constraint checking. The old code used two
stacked ArrayCoerceExprs to handle type + typmod coercion, which was pretty
inefficient, and adding yet another array deconstruction to do domain
constraint checking seemed very unappetizing.
In the case where we just need a single, very simple coercion function,
doing this straightforwardly leads to a noticeable increase in the
per-array-element runtime cost. Hence, add an additional shortcut evalfunc
in execExprInterp.c that skips unnecessary overhead for that specific form
of expression. The runtime speed of simple cases is within 1% or so of
where it was before, while cases that previously required two levels of
array processing are significantly faster.
Finally, create an implicit array type for every domain type, as we do for
base types, enums, etc. Everything except the array-coercion case seems
to just work without further effort.
Tom Lane, reviewed by Andrew Dunstan
Discussion: https://postgr.es/m/9852.1499791473@sss.pgh.pa.us
Add bgw_type field to background worker structure. It is intended to be
set to the same value for all workers of the same type, so they can be
grouped in pg_stat_activity, for example.
The backend_type column in pg_stat_activity now shows bgw_type for a
background worker. The ps listing also no longer calls out that a
process is a background worker but just show the bgw_type. That way,
being a background worker is more of an implementation detail now that
is not shown to the user. However, most log messages still refer to
'background worker "%s"'; otherwise constructing sensible and
translatable log messages would become tricky.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
At the time replacement_sort_tuples was introduced, there were still
cases where replacement selection sort noticeably outperformed using
quicksort even for the first run. However, those cases seem to have
evaporated as a result of further improvements made since that time
(and perhaps also advances in CPU technology). So remove replacement
selection and the controlling GUC entirely. This makes tuplesort.c
noticeably simpler and probably paves the way for further
optimizations someone might want to do later.
Peter Geoghegan, with review and testing by Tomas Vondra and me.
Discussion: https://postgr.es/m/CAH2-WzmmNjG_K0R9nqYwMq3zjyJJK+hCbiZYNGhAy-Zyjs64GQ@mail.gmail.com
For XML compatibility, replace marked sections <![IGNORE[ ]]> with
comments <!-- -->. In some cases it seemed better to remove the ignored
text altogether, and in one case the text should not have been ignored.
This is the way lcov was intended to be used. It is much faster and
more robust and makes the makefiles simpler than running it in each
subdirectory.
The previous coding ran gcov before lcov, but that is useless because
lcov/geninfo call gcov internally and use that information. Moreover,
this led to complications and failures during parallel make. This
separates the two targets: You either use "make coverage" to get
textual output from gcov or "make coverage-html" to get an HTML report
via lcov. (Using both is still problematic because they write the same
output files.)
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This reverts commit 15bc038f9, along with the followon commits 1635e80d3
and 984c92074 that tried to clean up the problems exposed by bug #14825.
The result was incomplete because it failed to address parallel-query
requirements. With 10.0 release so close upon us, now does not seem like
the time to be adding more code to fix that. I hope we can un-revert this
code and add the missing parallel query support during the v11 cycle.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
Previously, we created a variant of the installation instructions for
producing the plain-text INSTALL file by marking up certain parts of
installation.sgml using SGML parameterized marked sections. Marked
sections will not work anymore in XML, so before we can convert the
documentation to XML, we need a new approach.
DocBook provides a "profiling" feature that allows selecting content
based on attributes, which would work here. But it imposes a noticeable
overhead when building the full documentation and causes complications
when building some output formats, and given that we recently spent a
fair amount of effort optimizing the documentation build time, it seems
sad to have to accept that.
So as an alternative, (1) we create our own mini-profiling layer that
adjusts just the text we want, and (2) assemble the pieces of content
that we want in the INSTALL file using XInclude. That way, there is no
overhead when building the full documentation and most of the "ugly"
stuff in installation.sgml can be removed and dealt with out of line.
When requesting a particular replication slot, the new pg_basebackup
option -C/--create-slot creates it before starting to replicate from it.
Further refactor the slot creation logic to include the temporary slot
creation logic into the same function. Add new arguments is_temporary
and preserve_wal to CreateReplicationSlot(). Print in --verbose mode
that a slot has been created.
Author: Michael Banck <michael.banck@credativ.de>
It drops objects outside information_schema that depend on objects
inside information_schema. For example, it will drop a user-defined
view if the view query refers to information_schema.
Discussion: https://postgr.es/m/20170831025345.GE3963697@rfd.leadboat.com
The blacklist mechanism added by the preceding commit directly fixes
most of the practical cases that the same-transaction test was meant
to cover. What remains is use-cases like
begin;
create type e as enum('x');
alter type e add value 'y';
-- use 'y' somehow
commit;
However, because the same-transaction test is heuristic, it fails on
small variants of that, such as renaming the type or changing its
owner. Rather than try to explain the behavior to users, let's
remove it and just have a rule that the newly added value can't be
used before being committed, full stop. Perhaps later it will be
worth the implementation effort and overhead to have a more accurate
test for type-was-created-in-this-transaction. We'll wait for some
field experience with v10 before deciding to do that.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
Commit 15bc038f9 allowed ALTER TYPE ADD VALUE to be executed inside
transaction blocks, by disallowing the use of the added value later
in the same transaction, except under limited circumstances. However,
the test for "limited circumstances" was heuristic and could reject
references to enum values that were created during CREATE TYPE AS ENUM,
not just later. This breaks the use-case of restoring pg_dump scripts
in a single transaction, as reported in bug #14825 from Balazs Szilfai.
We can improve this by keeping a "blacklist" table of enum value OIDs
created by ALTER TYPE ADD VALUE during the current transaction. Any
visible-but-uncommitted value whose OID is not in the blacklist must
have been created by CREATE TYPE AS ENUM, and can be used safely
because it could not have a lifespan shorter than its parent enum type.
This change also removes the restriction that a renamed enum value
can't be used before being committed (unless it was on the blacklist).
Andrew Dunstan, with cosmetic improvements by me.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
The --slot option somehow ended up under options controlling the output,
and some other options were in a nonsensical place or were not moved
after recent renamings, so tidy all that up a bit.
Explain more about how the different password authentication methods and
the password_encryption settings relate to each other, give some
upgrading advice, and set a better link from the release notes.
Reviewed-by: Jeff Janes <jeff.janes@gmail.com>
The recent addition of a test suite for this module revealed a few
problems. It uses a crypt() method that is no longer considered secure
and doesn't work anymore on some platforms. Using a volatile input
function violates internal sanity check assumptions and leads to
failures on the build farm.
So this module is neither a usable security tool nor a good example for
an extension. No one wanted to argue for keeping or improving it, so
remove it.
Discussion: https://www.postgresql.org/message-id/5645b0d7-cc40-6ab5-c553-292a91091ee7%402ndquadrant.com
"\if :{?variable_name}" will be translated to "\if TRUE" if the variable
exists and "\if FALSE" otherwise. Thus it will be possible to execute code
conditionally on the existence of the variable, regardless of its value.
Fabien Coelho, with some review by Robins Tharakan and some light text
editing by me.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1708260835520.3627@lancre
GRANT, REVOKE, and some allied commands allow the noise word GROUP
before a role name (cf. grantee production in gram.y). This option
does not exist elsewhere, but it had nonetheless snuck into the
documentation for ALTER ROLE, ALTER USER, and CREATE SCHEMA.
Seems to be a copy-and-pasteo in commit 31eae6028, which did expand the
syntax choices here, but not in that way. Back-patch to 9.5 where that
came in.
Discussion: https://postgr.es/m/20170916123750.8885.66941@wrigleys.postgresql.org
Remove gratuitous differences in the process names shown in
pg_stat_activity.backend_type and the ps output.
Reviewed-by: Takayuki Tsunakawa <tsunakawa.takay@jp.fujitsu.com>
Since rsync 3.0.0 (released in 2008), the default way to enumerate
changes was changed in a way that makes it less likely that the hardlink
sync mode works. Since the whole point of the documented procedure is
for the hardlinks to work, change our docs to suggest using the
backwards compatibility switch.
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
There are common use-cases in which the compress and/or decompress
functions can be omitted, with the result being that we make no
data transformation when storing or retrieving index values.
Previously, you had to provide a no-op function anyway, but this
patch allows such opclass support functions to be omitted.
Furthermore, if the compress function is omitted, then the core code
knows that the stored representation is the same as the original data.
This means we can allow index-only scans without requiring a fetch
function to be provided either. Previously you had to provide a
no-op fetch function if you wanted IOS to work.
This reportedly provides a small performance benefit in such cases,
but IMO the real reason for doing it is just to reduce the amount of
useless boilerplate code that has to be written for GiST opclasses.
Andrey Borodin, reviewed by Dmitriy Sarafannikov
Discussion: https://postgr.es/m/CAJEAwVELVx9gYscpE=Be6iJxvdW5unZ_LkcAaVNSeOwvdwtD=A@mail.gmail.com
Add item about number of times statement-level triggers will be fired.
Rearrange the compatibility items into (what seems to me) a less
random ordering.
Commit 0f79440fb introduced mechanism to keep AFTER STATEMENT triggers
from firing more than once per statement, which was formerly possible
if more than one FK enforcement action had to be applied to a given
table. Add a similar mechanism for BEFORE STATEMENT triggers, so that
we don't have the unexpected situation of firing BEFORE STATEMENT
triggers more often than AFTER STATEMENT.
As with the previous patch, back-patch to v10.
Discussion: https://postgr.es/m/22315.1505584992@sss.pgh.pa.us
I noticed that there were exactly no complete examples of use of
a transition table in a trigger function, and no clear description
of just how you'd do it either. Improve that.
The standard says that all changes of the same kind (insert, update, or
delete) caused in one table by a single SQL statement should be reported
in a single transition table; and by that, they mean to include foreign key
enforcement actions cascading from the statement's direct effects. It's
also reasonable to conclude that if the standard had wCTEs, they would say
that effects of wCTEs applying to the same table as each other or the outer
statement should be merged into one transition table. We weren't doing it
like that.
Hence, arrange to merge tuples from multiple update actions into a single
transition table as much as we can. There is a problem, which is that if
the firing of FK enforcement triggers and after-row triggers with
transition tables is interspersed, we might need to report more tuples
after some triggers have already seen the transition table. It seems like
a bad idea for the transition table to be mutable between trigger calls.
There's no good way around this without a major redesign of the FK logic,
so for now, resolve it by opening a new transition table each time this
happens.
Also, ensure that AFTER STATEMENT triggers fire just once per statement,
or once per transition table when we're forced to make more than one.
Previous versions of Postgres have allowed each FK enforcement query
to cause an additional firing of the AFTER STATEMENT triggers for the
referencing table, but that's certainly not per spec. (We're still
doing multiple firings of BEFORE STATEMENT triggers, though; is that
something worth changing?)
Also, forbid using transition tables with column-specific UPDATE triggers.
The spec requires such transition tables to show only the tuples for which
the UPDATE trigger would have fired, which means maintaining multiple
transition tables or else somehow filtering the contents at readout.
Maybe someday we'll bother to support that option, but it looks like a
lot of trouble for a marginal feature.
The transition tables are now managed by the AfterTriggers data structures,
rather than being directly the responsibility of ModifyTable nodes. This
removes a subtransaction-lifespan memory leak introduced by my previous
band-aid patch 3c4359521.
In passing, refactor the AfterTriggers data structures to reduce the
management overhead for them, by using arrays of structs rather than
several parallel arrays for per-query-level and per-subtransaction state.
I failed to resist the temptation to do some copy-editing on the SGML
docs about triggers, above and beyond merely documenting the effects
of this patch.
Back-patch to v10, because we don't want the semantics of transition
tables to change post-release.
Patch by me, with help and review from Thomas Munro.
Discussion: https://postgr.es/m/20170909064853.25630.12825@wrigleys.postgresql.org
Document that rsync is an _optional_ way to upgrade standbys, suggest
rsync option --dry-run, and mention a way of upgrading one standby from
another using rsync. Also clarify some instructions by specifying if
they operate on the old or new clusters.
Reported-by: Stephen Frost, Magnus Hagander
Discussion: https://postgr.es/m/20170914191250.GB6595@momjian.us
Backpatch-through: 9.5
Historically, the selectivity functions have simply not distinguished
< from <=, or > from >=, arguing that the fraction of the population that
satisfies the "=" aspect can be considered to be vanishingly small, if the
comparison value isn't any of the most-common-values for the variable.
(If it is, the code path that executes the operator against each MCV will
take care of things properly.) But that isn't really true unless we're
dealing with a continuum of variable values, and in practice we seldom are.
If "x = const" would estimate a nonzero number of rows for a given const
value, then it follows that we ought to estimate different numbers of rows
for "x < const" and "x <= const", even if the const is not one of the MCVs.
Handling this more honestly makes a significant difference in edge cases,
such as the estimate for a tight range (x BETWEEN y AND z where y and z
are close together).
Hence, split scalarltsel into scalarltsel/scalarlesel, and similarly
split scalargtsel into scalargtsel/scalargesel. Adjust <= and >=
operator definitions to reference the new selectivity functions.
Improve the core ineq_histogram_selectivity() function to make a
correction for equality. (Along the way, I learned quite a bit about
exactly why that function gives good answers, which I tried to memorialize
in improved comments.)
The corresponding join selectivity functions were, and remain, just stubs.
But I chose to split them similarly, to avoid confusion and to prevent the
need for doing this exercise again if someone ever makes them less stubby.
In passing, change ineq_histogram_selectivity's clamp for extreme
probability estimates so that it varies depending on the histogram
size, instead of being hardwired at 0.0001. With the default histogram
size of 100 entries, you still get the old clamp value, but bigger
histograms should allow us to put more faith in edge values.
Tom Lane, reviewed by Aleksander Alekseev and Kuntal Ghosh
Discussion: https://postgr.es/m/12232.1499140410@sss.pgh.pa.us
The documentation claimed that one should send
"pg_same_as_startup_message" as the user name in the SCRAM messages, but
this did not match the actual implementation, so remove it.
This makes it clear that pg_upgrade standby upgrade instructions should
only be used in link mode, adds examples, and explains how rsync works
with links.
Reported-by: Andreas Joseph Krogh
Discussion: https://postgr.es/m/VisenaEmail.6c.c0e592c5af4ef0a2.15e785dcb61@tc7-visena
Backpatch-through: 9.5
This patch adds ERROR, SQLSTATE, and ROW_COUNT, which are updated after
every query, as well as LAST_ERROR_MESSAGE and LAST_ERROR_SQLSTATE,
which are updated only when a query fails. The expected usage of these
is for scripting.
Fabien Coelho, reviewed by Pavel Stehule
Discussion: https://postgr.es/m/alpine.DEB.2.20.1704042158020.12290@lancre
Robert Haas