Rather than considering this result as meaning "unknown", report LONG_MAX.
This won't change what superusers can set max_stack_depth to, but it will
cause InitializeGUCOptions() to set the built-in default to 2MB not 100kB.
The latter seems like a fairly unreasonable interpretation of "infinity".
Per my investigation of odd buildfarm results as well as an old complaint
from Heikki.
Since this should persuade all the buildfarm animals to use a reasonable
stack depth setting during "make check", revert previous patch that dumbed
down a recursive regression test to only 5 levels.
Some buildfarm members fail the test with the original depth of 10 levels,
apparently because they are running at the minimum max_stack_depth setting
of 100kB and using ~ 10k per recursion level. While it might be
interesting to try to figure out why they're eating so much stack, it isn't
likely that any fix for that would be back-patchable. So just change the
test to recurse only 5 levels. The extra levels don't prove anything
correctness-wise anyway.
In general, expression execution state trees aren't re-entrantly usable,
since functions can store private state information in them.
For efficiency reasons, plpgsql tries to cache and reuse state trees for
"simple" expressions. It can get away with that most of the time, but it
can fail if the state tree is dirty from a previous failed execution (as
in an example from Alvaro) or is being used recursively (as noted by me).
Fix by tracking whether a state tree is in use, and falling back to the
"non-simple" code path if so. This results in a pretty considerable speed
hit when the non-simple path is taken, but the available alternatives seem
even more unpleasant because they add overhead in the simple path. Per
idea from Heikki.
Back-patch to all supported branches.
expressions. We need to deal with this when handling subscripts in an array
assignment, and also when catching an exception. In an Assert-enabled build
these omissions led to Assert failures, but I think in a normal build the
only consequence would be short-term memory leakage; which may explain why
this wasn't reported from the field long ago.
Back-patch to all supported versions. 7.4 doesn't have exceptions, but
otherwise these bugs go all the way back.
Heikki Linnakangas and Tom Lane
can be caught in the same places that could catch an ordinary RAISE ERROR
in the same location. The previous coding insisted on throwing the error
from the block containing the active exception handler; which is arguably
more surprising, and definitely unlike Oracle's behavior.
Not back-patching, since this is a pretty obscure corner case. The risk
of breaking somebody's code in a minor version update seems to outweigh
any possible benefit.
Piyush Newe, reviewed by David Fetter
of YYSTYPE, and hence returning the wrong answer for cases where a plpgsql
"unreserved keyword" really does conflict with a variable name. Obviously
I didn't test this enough :-(. Per bug #5524 from Peter Gagarinov.
default of "plpgsql". This is more reasonable than it was when the DO patch
was written, because we have since decided that plpgsql should be installed
by default. Per discussion, having a parameter for this doesn't seem useful
enough to justify the risk of application breakage if the value is changed
unexpectedly.
This is the last EXECUTE-like plpgsql statement that was missing
the capability of inserting parameter values via USING.
Pavel Stehule, reviewed by Itagaki Takahiro
default be "throw error on conflict", as per discussions. The GUC variable
is plpgsql.variable_conflict, with values "error", "use_variable",
"use_column". The behavior can also be specified per-function by inserting
one of
#variable_conflict error
#variable_conflict use_variable
#variable_conflict use_column
at the start of the function body.
The 8.5 release notes will need to mention using "use_variable" to retain
backward-compatible behavior, although we should encourage people to migrate
to the much less mistake-prone "error" setting.
Update the plpgsql documentation to match this and other recent changes.
directly. This was a lot of trouble, but should be worth it in terms of
not having to keep the plpgsql lexer in step with core anymore. In addition
the handling of keywords is significantly better-structured, allowing us to
de-reserve a number of words that plpgsql formerly treated as reserved.
can be the name of a plpgsql cursor variable, which formerly was converted
to $N before the core parser saw it, but that's no longer the case.
Deal with plain name references to plpgsql variables, and add a regression
test case that exposes the failure.
into SQL expressions, to using the newly added parser callback hooks.
This allows us to do the substitutions in a more semantically-aware way:
a variable reference will only be recognized where it can validly go,
ie, a place where a column value or parameter would be legal, instead of
the former behavior that would replace any textual match including
table names and column aliases (leading to syntax errors later on).
A release-note-worthy fine point is that plpgsql variable names that match
fully-reserved words will now need to be quoted.
This commit preserves the former behavior that variable references take
precedence over any possible match to a column name. The infrastructure
is in place to support the reverse precedence or throwing an error on
ambiguity, but those behaviors aren't accessible yet.
Most of the code changes here are associated with making the namespace
data structure persist so that it can be consulted at runtime, instead
of throwing it away at the end of initial function parsing.
The plpgsql scanner is still doing name lookups, but that behavior is
now irrelevant for SQL expressions. A future commit will deal with
removing unnecessary lookups.
behavior, and is so little used that no one has been interested in fixing it.
To ensure that possible uses are covered, remove the ALIAS declaration's
arbitrary restriction that only $n identifiers can be aliased.
(We could alternatively make RENAME act just like ALIAS, but per discussion
having two different ways to do the same thing is probably more confusing than
helpful.)
As proof of concept, modify plpgsql to use the hooks. plpgsql is still
inserting $n symbols textually, but the "back end" of the parsing process now
goes through the ParamRef hook instead of using a fixed parameter-type array,
and then execution only fetches actually-referenced parameters, using a hook
added to ParamListInfo.
Although there's a lot left to be done in plpgsql, this already cures the
"if (TG_OP = 'INSERT' and NEW.foo ...)" problem, as illustrated by the
changed regression test.
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
by supporting conversions in places that used to demand exact rowtype match.
Since this issue is certain to come up elsewhere (in fact, already has,
in ExecEvalConvertRowtype), factor out the support code into new core
functions for tuple conversion. I chose to put these in a new source
file since heaptuple.c is already overly long.
Heavily revised version of a patch by Pavel Stehule.
more nearly matching the core SQL scanner. The user-visible effects are:
* Block comments (slash-star comments) now nest, as per SQL spec.
* In standard_conforming_strings mode, backslash as the last character of a
non-E string literal is now correctly taken as an ordinary character;
formerly it was misinterpreted as escaping the ending quote. (Since the
string also had to pass through the core scanner, this invariably led
to syntax errors.)
* Formerly, backslashes in the format string of RAISE were always treated as
quoting the next character, regardless of mode. Now, they are ordinary
characters with standard_conforming_strings on, while with it off, they
introduce the same set of escapes as in the core SQL scanner. Also,
escape_string_warning is now effective for RAISE format strings. These
changes make RAISE format strings work just like any other string literal.
This is implemented by copying and pasting a lot of logic from the core
scanner. It would be a good idea to look into getting rid of plpgsql's
scanner entirely in favor of using the core scanner. However, that involves
more change than I can justify making during beta --- in particular, the core
scanner would have to become re-entrant.
In passing, remove the kluge that made the plpgsql scanner emit T_FUNCTION or
T_TRIGGER as a made-up first token. That presumably had some value once upon
a time, but now it's just useless complication for both the scanner and the
grammar.
by my patch of 2007-01-28 to use per-subtransaction ExprContexts/EStates:
since we re-prepared any expression tree when the current subtransaction ID
changed, we'd accumulate more and more leaked expression state trees in the
outermost subtransaction if the same function was executed at multiple levels
of subtransaction nesting. To fix, go back to the previous scheme where
there was only one EState per transaction for simple plpgsql expressions.
We really only need an ExprContext per subtransaction, not a whole EState,
so it's possible to keep prepared expression state trees in the one EState
throughout the transaction. This should be more efficient as well as not
leaking memory for cases involving lots of subtransactions.
The added regression test is the case that inspired the 2007-01-28 patch in
the first place, just to make sure we didn't go backwards. The current
memory leak complaint is unfortunately hard to test for in the regression
test framework, though manual testing shows it's fixed.
Although this is a pre-existing bug, I'm not back-patching because I'd like to
see this method get some field testing first. Consider back-patching if it
gets through 8.4beta unscathed.
instead of vice versa. Update the regression test expectations to support
that. In the plpgsql test, adjust the test data so that this isn't an
issue. In the char and varchar tests, add new expected files.
so long as all the trailing arguments are of the same (non-array) type.
The function receives them as a single array argument (which is why they
have to all be the same type).
It might be useful to extend this facility to aggregates, but this patch
doesn't do that.
This patch imposes a noticeable slowdown on function lookup --- a follow-on
patch will fix that by adding a redundant column to pg_proc.
Pavel Stehule
HINT fields to a user-thrown error message, and to specify the SQLSTATE
error code to use. The syntax has also been tweaked so that the
Oracle-compatible case "RAISE exception_name" works (though you won't get a
very nice error message if you just write that much). Lastly, support
the Oracle-compatible syntax "RAISE" with no parameters to re-throw
the current error from within an EXCEPTION block.
In passing, allow the syntax SQLSTATE 'nnnnn' within EXCEPTION lists,
so that there is a way to trap errors with custom SQLSTATE codes.
Pavel Stehule and Tom Lane
sugar for PL/PgSQL set-returning functions that want to return the result
of evaluating a query; it should also be more efficient than repeated
RETURN NEXT statements. Based on an earlier patch from Pavel Stehule.
name. With this patch, it is always possible for the user to qualify a
plpgsql variable name if needed to avoid ambiguity. While there is much more
work to be done in this area, this simple change removes one unnecessary
incompatibility with Oracle. Per discussion.
We have once or twice seen failures suggesting that control didn't get
to the exception block before the timeout elapsed, which is unlikely
but not impossible in a parallel regression test (with a dozen other
backends competing for cycles). This change doesn't completely prevent
the problem of course, but it should reduce the probability enough that
we don't see it anymore. Per buildfarm results.
---------------------------------------------------------------------------
Add dynamic record inspection to PL/PgSQL, useful for generic triggers:
tval2 := r.(cname);
or
columns := r.(*);
Titus von Boxberg
command or expression, rather than one copy for each textual occurrence as
it did before. This might result in some small performance improvement,
but the compelling reason to do it is that not doing so can result in
unexpected grouping failures because the main SQL parser won't see different
parameter numbers as equivalent. Add a regression test for the failure case.
Per report from Robert Davidson.
end of the block:
<<label>>
begin
...
end label;
Similarly for loops. This is per PL/SQL. Update the documentation and
add regression tests. Patch from Pavel Stehule, code review by Neil
Conway.
we need to be careful to reset rc to PLPGSQL_RC_OK, depending on how
the loop's logic is structured. If we continue a loop but it then
exits without executing the loop's body again, we want to return
PLPGSQL_RC_OK to our caller. Enhance the regression tests to catch
this problem. Per report from Michael Fuhr.
Peter Eisentraut