is unique and is not referenced above the join. In this case the inner
side doesn't affect the query result and can be thrown away entirely.
Although perhaps nobody would ever write such a thing by hand, it's
a reasonably common case in machine-generated SQL.
The current implementation only recognizes the case where the inner side
is a simple relation with a unique index matching the query conditions.
This is enough for the use-cases that have been shown so far, but we
might want to try to handle other cases later.
Robert Haas, somewhat rewritten by Tom
an explicit model of rescan costs being different from first-time costs.
The costing of Material nodes in particular now has some visible relationship
to the actual runtime behavior, where before it was essentially fantasy.
This also fixes up a couple of places where different materialized plan types
were treated differently for no very good reason (probably just oversights).
A couple of the regression tests are affected, because the planner now chooses
to put the other relation on the inside of a nestloop-with-materialize.
So far as I can see both changes are sane, and the planner is now more
consistently following the expectation that it should prefer to materialize
the smaller of two relations.
Per a recent discussion with Robert Haas.
the cheapest-total inner path as a new candidate while truncating the
sort key list, if it already matched the full sort key list. This is
too much of a corner case to be worth back-patching, since it's unusual
for the cheapest total path to be sorted, and anyway no real harm is
done (except in JOIN_SEMI/ANTI cases where cost_mergejoin is a bit
broken at the moment). But it wasn't behaving as intended, so fix it.
Noted while examining a test case from Kevin Grittner. This error doesn't
explain his issue, but it does explain why "set enable_seqscan = off"
seemed to reproduce it for me.
though it is an inner rather than outer join type. This essentially means
that we don't bother to separate "pushed down" qual conditions from actual
join quals at a semijoin plan node; which is okay because the restrictions of
SQL syntax make it impossible to have a pushed-down qual that references the
inner side of a semijoin. This allows noticeably better optimization of
IN/EXISTS cases than we had before, since the equivalence-class machinery can
now use those quals. Also fix a couple of other mistakes that had essentially
disabled the ability to unique-ify the inner relation and then join it to just
a subset of the left-hand relations. An example case using the regression
database is
select * from tenk1 a, tenk1 b
where (a.unique1,b.unique2) in (select unique1,unique2 from tenk1 c);
which is planned reasonably well by 8.3 and earlier but had been forcing a
cartesian join of a/b in CVS HEAD.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
the old JOIN_IN code, but antijoins are new functionality.) Teach the planner
to convert appropriate EXISTS and NOT EXISTS subqueries into semi and anti
joins respectively. Also, LEFT JOINs with suitable upper-level IS NULL
filters are recognized as being anti joins. Unify the InClauseInfo and
OuterJoinInfo infrastructure into "SpecialJoinInfo". With that change,
it becomes possible to associate a SpecialJoinInfo with every join attempt,
which permits some cleanup of join selectivity estimation. That needs to be
taken much further than this patch does, but the next step is to change the
API for oprjoin selectivity functions, which seems like material for a
separate patch. So for the moment the output size estimates for semi and
especially anti joins are quite bogus.
knowledge up through any joins it participates in. We were doing that already
in some special cases but not in the general case. Also, defend against zero
row estimates for the input relations in cost_mergejoin --- this fix may have
eliminated the only scenario in which that can happen, but be safe. Per
report from Alex Solovey.
of poorer planning in 8.3 than 8.2:
1. After pushing a constant across an outer join --- ie, given
"a LEFT JOIN b ON (a.x = b.y) WHERE a.x = 42", we can deduce that b.y is
sort of equal to 42, in the sense that we needn't fetch any b rows where
it isn't 42 --- loop to see if any additional deductions can be made.
Previous releases did that by recursing, but I had mistakenly thought that
this was no longer necessary given the EquivalenceClass machinery.
2. Allow pushing constants across outer join conditions even if the
condition is outerjoin_delayed due to a lower outer join. This is safe
as long as the condition is strict and we re-test it at the upper join.
3. Keep the outer-join clause even if we successfully push a constant
across it. This is *necessary* in the outerjoin_delayed case, but
even in the simple case, it seems better to do this to ensure that the
join search order heuristics will consider the join as reasonable to
make. Mark such a clause as having selectivity 1.0, though, since it's
not going to eliminate very many rows after application of the constant
condition.
4. Tweak have_relevant_eclass_joinclause to report that two relations
are joinable when they have vars that are equated to the same constant.
We won't actually generate any joinclause from such an EquivalenceClass,
but again it seems that in such a case it's a good idea to consider
the join as worth costing out.
5. Fix a bug in select_mergejoin_clauses that was exposed by these
changes: we have to reject candidate mergejoin clauses if either side was
equated to a constant, because we can't construct a canonical pathkey list
for such a clause. This is an implementation restriction that might be
worth fixing someday, but it doesn't seem critical to get it done for 8.3.
cheapest-startup-cost innerjoin indexscans, and make joinpath.c consider
both of these (when different) as the inside of a nestloop join. The
original design was based on the assumption that indexscan paths always
have negligible startup cost, and so total cost is the only important
figure of merit; an assumption that's obviously broken by bitmap
indexscans. This oversight could lead to choosing poor plans in cases
where fast-start behavior is more important than total cost, such as
LIMIT and IN queries. 8.1-vintage brain fade exposed by an example from
Chuck D.
representation of equivalence classes of variables. This is an extensive
rewrite, but it brings a number of benefits:
* planner no longer fails in the presence of "incomplete" operator families
that don't offer operators for every possible combination of datatypes.
* avoid generating and then discarding redundant equality clauses.
* remove bogus assumption that derived equalities always use operators
named "=".
* mergejoins can work with a variety of sort orders (e.g., descending) now,
instead of tying each mergejoinable operator to exactly one sort order.
* better recognition of redundant sort columns.
* can make use of equalities appearing underneath an outer join.
which comparison operators to use for plan nodes involving tuple comparison
(Agg, Group, Unique, SetOp). Formerly the executor looked up the default
equality operator for the datatype, which was really pretty shaky, since it's
possible that the data being fed to the node is sorted according to some
nondefault operator class that could have an incompatible idea of equality.
The planner knows what it has sorted by and therefore can provide the right
equality operator to use. Also, this change moves a couple of catalog lookups
out of the executor and into the planner, which should help startup time for
pre-planned queries by some small amount. Modify the planner to remove some
other cavalier assumptions about always being able to use the default
operators. Also add "nulls first/last" info to the Plan node for a mergejoin
--- neither the executor nor the planner can cope yet, but at least the API is
in place.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
mergejoin possibility where the inner rel was less well sorted than
the outer (ie, it matches some but not all of the merge clauses that
can work with the outer), if the inner path in question is also the
overall cheapest path for its rel. This is an old bug, but I'm not
sure it's worth back-patching, because it's such a corner case.
Noted while investigating a test case from Peter Hardman.
that the Mackert-Lohmann formula applies across all the repetitions of the
nestloop, not just each scan independently. We use the M-L formula to
estimate the number of pages fetched from the index as well as from the table;
that isn't what it was designed for, but it seems reasonably applicable
anyway. This makes large numbers of repetitions look much cheaper than
before, which accords with many reports we've received of overestimation
of the cost of a nestloop. Also, change the index access cost model to
charge random_page_cost per index leaf page touched, while explicitly
not counting anything for access to metapage or upper tree pages. This
may all need tweaking after we get some field experience, but in simple
tests it seems to be giving saner results than before. The main thing
is to get the infrastructure in place to let cost_index() and amcostestimate
functions take repeated scans into account at all. Per my recent proposal.
Note: this patch changes pg_proc.h, but I did not force initdb because
the changes are basically cosmetic --- the system does not look into
pg_proc to decide how to call an index amcostestimate function, and
there's no way to call such a function from SQL at all.
relations: fix the executor so that we can have an Append plan on the
inside of a nestloop and still pass down outer index keys to index scans
within the Append, then generate such plans as if they were regular
inner indexscans. This avoids the need to evaluate the outer relation
multiple times.
... in fact, it will be applied now in any query whatsoever. I'm still
a bit concerned about the cycles that might be expended in failed proof
attempts, but given that CE is turned off by default, it's the user's
choice whether to expend those cycles or not. (Possibly we should
change the simple bool constraint_exclusion parameter to something
more fine-grained?)
thereby sharing code with the inheritance case. This puts the UNION-ALL-view
approach to partitioned tables on par with inheritance, so far as constraint
exclusion is concerned: it works either way. (Still need to update the docs
to say so.) The definition of "simple UNION ALL" is a little simpler than
I would like --- basically the union arms can only be SELECT * FROM foo
--- but it's good enough for partitioned-table cases.
inheritance trees on-the-fly, which pretty well constrained us to considering
only one way of planning inheritance, expand inheritance sets during the
planner prep phase, and build a side data structure that can be consulted
later to find which RTEs are members of which inheritance sets. As proof of
concept, use the data structure to plan joins against inheritance sets more
efficiently: we can now use indexes on the set members in inner-indexscan
joins. (The generated plans could be improved further, but it'll take some
executor changes.) This data structure will also support handling UNION ALL
subqueries in the same way as inheritance sets, but that aspect of it isn't
finished yet.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
for an outer join; symptom is bogus error "RIGHT JOIN is only supported with
merge-joinable join conditions". Problem was that select_mergejoin_clauses
did its tests in the wrong order. We need to force left join not right join
for a merge join when there are non-mergeable join clauses; but the test for
this only accounted for mergejoinability of the clause operator, and not
whether the left and right Vars were of the proper relations. Per report
from Jean-Pierre Pelletier.
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
where there was also a WHERE-clause restriction that applied to the
join. The check on restrictlist == NIL is really unnecessary anyway,
because select_mergejoin_clauses already checked for and complained
about any unmergejoinable join clauses. So just take it out.
scans, using in-memory tuple ID bitmaps as the intermediary. The planner
frontend (path creation and cost estimation) is not there yet, so none
of this code can be executed. I have tested it using some hacked planner
code that is far too ugly to see the light of day, however. Committing
now so that the bulk of the infrastructure changes go in before the tree
drifts under me.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
That particular corner case is not exactly compelling, but given 7.4's
ability to discard redundant join clauses, it is possible for the situation
to arise from queries that are not so obviously silly. Per bug report
of 6-Apr-04.
join conditions in which each OR subclause includes a constraint on
the same relation. This implements the other useful side-effect of
conversion to CNF format, without its unpleasant side-effects. As
per pghackers discussion of a few weeks ago.
fields: now they are valid whenever the clause is a binary opclause,
not only when it is a potential join clause (there is a new boolean
field canjoin to signal the latter condition). This lets us avoid
recomputing the relid sets over and over while examining indexes.
Still more work to do to make this as useful as it could be, because
there are places that could use the info but don't have access to the
RestrictInfo node.
Try to model the effect of rescanning input tuples in mergejoins;
account for JOIN_IN short-circuiting where appropriate. Also, recognize
that mergejoin and hashjoin clauses may now be more than single operator
calls, so we have to charge appropriate execution costs.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
Tom Lane