A single PGSS entry's spinlock is used to be able to modify "counters"
without holding pgss->lock exclusively, as mentioned at the top of
pg_stat_statements.c and within pgssEntry.
Within a single pgssEntry, stats_since and minmax_stats_since are never
modified without holding pgss->lock exclusively, so there is no need to
hold an entry's spinlock when reading stats_since and
minmax_stats_since, as done when scanning all the PGSS entries for
function calls of pg_stat_statements().
This also restores the consistency between the code and the comments
about the entry's spinlock usage. This change is a performance
improvement (it can be argued that this is a logic bug), so there is no
need for a backpatch. This saves two instructions from being read while
holding an entry's spinlock.
Author: Karina Litskevich
Reviewed-by: Michael Paquier, wenhui qiu
Discussion: https://postgr.es/m/CACiT8ibhCmzbcOxM0v4pRLH3abk-95LPkt7_uC2JMP+miPjxsg@mail.gmail.com
Some utility statements contain queries that can be planned and
executed: CREATE TABLE AS and DECLARE CURSOR. This commit adds query ID
computation for the inner queries executed by these two utility
commands, with and without EXPLAIN. This change leads to four new
callers of JumbleQuery() and post_parse_analyze_hook() so as extensions
can decide what to do with this new data.
Previously, extensions relying on the query ID, like pg_stat_statements,
were not able to track these nested queries as the query_id was 0.
For pg_stat_statements, this commit leads to additions under !toplevel
when pg_stat_statements.track is set to "all", as shown in its
regression tests. The output of EXPLAIN for these two utilities gains a
"Query Identifier" if compute_query_id is enabled.
Author: Anthonin Bonnefoy
Reviewed-by: Michael Paquier, Jian He
Discussion: https://postgr.es/m/CAO6_XqqM6S9bQ2qd=75W+yKATwoazxSNhv5sjW06fjGAtHbTUA@mail.gmail.com
Previously, a Query generated through the transform phase would have
unset stmt_location, tracking the starting point of a query string.
Extensions relying on the statement location to extract its relevant
parts in the source text string would fallback to use the whole
statement instead, leading to confusing results like in
pg_stat_statements for queries relying on nested queries, like:
- EXPLAIN, with top-level and nested query using the same query string,
and a query ID coming from the nested query when the non-top-level
entry.
- Multi-statements, with only partial portions of queries being
normalized.
- COPY TO with a query, SELECT or DMLs.
This patch improves things by keeping track of the statement locations
and propagate it to Query during transform, allowing PGSS to only show
the relevant part of the query for nested query. This leads to less
bloat in entries for non-top-level entries, as queries can now be
grouped within the same (toplevel, queryid) duos in pg_stat_statements.
The result gives a stricter one-one mapping between query IDs and its
query strings.
The regression tests introduced in 45e0ba30fc produce differences
reflecting the new logic.
Author: Anthonin Bonnefoy
Reviewed-by: Michael Paquier, Jian He
Discussion: https://postgr.es/m/CAO6_XqqM6S9bQ2qd=75W+yKATwoazxSNhv5sjW06fjGAtHbTUA@mail.gmail.com
Up to now, the parser's reporting of a statement's stmt_location
included any preceding whitespace or comments. This isn't really
desirable but was done to avoid accounting honestly for nonterminals
that reduce to empty. It causes problems for pg_stat_statements,
which partially compensates by manually stripping whitespace, but
is not bright enough to strip /*-style comments. There will be
more problems with an upcoming patch to improve reporting of errors
in extension scripts, so it's time to do something about this.
The thing we have to do to make it work right is to adjust
YYLLOC_DEFAULT to scan the inputs of each production to find the
first one that has a valid location (i.e., did not reduce to
empty). In theory this adds a little bit of per-reduction overhead,
but in practice it's negligible. I checked by measuring the time
to run raw_parser() on the contents of information_schema.sql, and
there was basically no change.
Having done that, we can rely on any nonterminal that didn't reduce
to completely empty to have a correct starting location, and we don't
need the kluges the stmtmulti production formerly used.
This should have a side benefit of allowing parse error reports to
include an error position in some cases where they formerly failed to
do so, due to trying to report the position of an empty nonterminal.
I did not go looking for an example though. The one previously known
case where that could happen (OptSchemaEltList) no longer needs the
kluge it had; but I rather doubt that that was the only case.
Discussion: https://postgr.es/m/ZvV1ClhnbJLCz7Sm@msg.df7cb.de
There have never been any regression tests in PGSS for various query
patterns for nested queries combined with level tracking, like:
- Multi-statements.
- CREATE TABLE AS
- CREATE/REFRESH MATERIALIZED VIEW
- DECLARE CURSOR
- EXPLAIN, with a subset of the above supported.
- COPY.
All the tests added here track historical, sometimes confusing, existing
behaviors. For example, EXPLAIN stores two PGSS entries with the same
top-level query string but two different query IDs as one is calculated
for the top-level EXPLAIN (this part is right) and a second one for the
inner query in the EXPLAIN (this part is not right).
A couple of patches are under discussion to improve the situation, and
all the tests added here will prove useful to evaluate the changes
discussed.
Author: Anthonin Bonnefoy
Reviewed-by: Michael Paquier, Jian He
Discussion: https://postgr.es/m/CAO6_XqqM6S9bQ2qd=75W+yKATwoazxSNhv5sjW06fjGAtHbTUA@mail.gmail.com
The view pg_stat_statements gains two columns:
- parallel_workers_to_launch, the number of parallel workers planned to
be launched.
- parallel_workers_launched, the number of parallel workers actually
launched.
The ratio of both columns offers hints that parallel workers are lacking
on a per-statement basis, requiring some tuning, in coordination with
"calls", the number of times a query is executed.
As of now, these numbers are tracked within Gather and GatherMerge
nodes. They could be extended to utilities that make use of parallel
workers (parallel btree and brin, VACUUM).
The module is bumped to 1.12.
Author: Guillaume Lelarge
Discussion: https://postgr.es/m/CAECtzeWtTGOK0UgKXdDGpfTVSa5bd_VbUt6K6xn8P7X+_dZqKw@mail.gmail.com
Refactoring in the interest of code consistency, a follow-up to 2e068db56e.
The argument against inserting a special enum value at the end of the enum
definition is that a switch statement might generate a compiler warning unless
it has a default clause.
Aleksander Alekseev, reviewed by Michael Paquier, Dean Rasheed, Peter Eisentraut
Discussion: https://postgr.es/m/CAJ7c6TMsiaV5urU_Pq6zJ2tXPDwk69-NKVh4AMN5XrRiM7N%2BGA%40mail.gmail.com
This is a continuation of work like 11c34b342b, done to reduce the
bloat of pg_stat_statements by applying more normalization to query
entries. This commit is able to detect and normalize values in
VariableSetStmt, resulting in:
SET conf_param = $1
Compared to other parse nodes, VariableSetStmt is embedded in much more
places in the parser, impacting many query patterns in
pg_stat_statements. A custom jumble function is used, with an extra
field in the node to decide if arguments should be included in the
jumbling or not, a location field being not enough for this purpose.
This approach allows for a finer tuning.
Clauses relying on one or more keywords are not normalized, for example:
* DEFAULT
* FROM CURRENT
* List of keywords. SET SESSION CHARACTERISTICS AS TRANSACTION,
where it is critical to differentiate different sets of options, is a
good example of why normalization should not happen.
Some queries use VariableSetStmt for some subclauses with SET, that also
have their values normalized:
- ALTER DATABASE
- ALTER ROLE
- ALTER SYSTEM
- CREATE/ALTER FUNCTION
ba90eac7a9 has added test coverage for most of the existing SET
patterns. The expected output of these tests shows the difference this
commit creates. Normalization could be perhaps applied to more portions
of the grammar but what is done here is conservative, and good enough as
a starting point.
Author: Greg Sabino Mullane, Michael Paquier
Discussion: https://postgr.es/m/36e5bffe-e989-194f-85c8-06e7bc88e6f7@amazon.com
Discussion: https://postgr.es/m/B44FA29D-EBD0-4DD9-ABC2-16F1CB087074@amazon.com
Discussion: https://postgr.es/m/CAKAnmmJtJY2jzQN91=2QAD2eAJAA-Per61eyO48-TyxEg-q0Rg@mail.gmail.com
There are many grammar flavors that depend on the parse node
VariableSetStmt. This closes the gap in pg_stat_statements by providing
test coverage for what should be a large majority of them, improving more
the work begun in de2aca2885. This will be used to ease the
evaluation of a path towards more normalization of SET queries with
query jumbling.
Note that SET NAMES (grammar from the standard, synonym of SET
client_encoding) is omitted on purpose, this could use UTF8 with a
conditional script where UTF8 is supported, but that does not seem worth
the maintenance cost for the sake of these tests.
The author has submitted most of these in a TAP test (filled in any
holes I could spot), still queries in a SQL file of pg_stat_statements
is able to achieve the same goal while being easier to look at when
testing normalization patterns.
Author: Greg Sabino Mullane, Michael Paquier
Discussion: https://postgr.es/m/CAKAnmmJtJY2jzQN91=2QAD2eAJAA-Per61eyO48-TyxEg-q0Rg@mail.gmail.com
This commit adds query ID reports for two code paths when processing
extended query protocol messages:
- When receiving a bind message, setting it to the first Query retrieved
from a cached cache.
- When receiving an execute message, setting it to the first PlannedStmt
stored in a portal.
An advantage of this method is that this is able to cover all the types
of portals handled in the extended query protocol, particularly these
two when the report done in ExecutorStart() is not enough (neither is an
addition in ExecutorRun(), actually, for the second point):
- Multiple execute messages, with multiple ExecutorRun().
- Portal with execute/fetch messages, like a query with a RETURNING
clause and a fetch size that stores the tuples in a first execute
message going though ExecutorStart() and ExecuteRun(), followed by one
or more execute messages doing only fetches from the tuplestore created
in the first message. This corresponds to the case where
execute_is_fetch is set, for example.
Note that the query ID reporting done in ExecutorStart() is still
necessary, as an EXECUTE requires it. Query ID reporting is optimistic
and more calls to pgstat_report_query_id() don't matter as the first
report takes priority except if the report is forced. The comment in
ExecutorStart() is adjusted to reflect better the reality with the
extended query protocol.
The test added in pg_stat_statements is a courtesy of Robert Haas. This
uses psql's \bind metacommand, hence this part is backpatched down to
v16.
Reported-by: Kaido Vaikla, Erik Wienhold
Author: Sami Imseih
Reviewed-by: Jian He, Andrei Lepikhov, Michael Paquier
Discussion: https://postgr.es/m/CA+427g8DiW3aZ6pOpVgkPbqK97ouBdf18VLiHFesea2jUk3XoQ@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoZxtnf_jZ=VqBSyaU8hfUkkwoJCJ6ufy4LGpXaunKrjrg@mail.gmail.com
Discussion: https://postgr.es/m/1391613709.939460.1684777418070@office.mailbox.org
Backpatch-through: 14
There are currently no tests in the tree checking that queries using the
extended query protocol are able to map with their query ID.
This can be achieved for some paths of the extended query protocol with
the psql meta-commands \bind or \bind_named, so let's add some tests
based on both.
I have found that to be a useful addition while working on a different
issue.
Discussion: https://postgr.es/m/ZuEt6MOEBSlifBfn@paquier.xyz
Prior to commit 0709b7ee72, which changed the spinlock primitives
to function as compiler barriers, access to variables within a
spinlock-protected section required using a volatile pointer, but
that is no longer necessary.
Reviewed-by: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/Zqkv9iK7MkNS0KaN%40nathan
This commit adds a regression test to verify that pg_stat_statements
correctly handles privileges, improving its test coverage.
Author: Keisuke Kuroda
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/2224ccf2e12c41ccb81702ef3303d5ac@nttcom.co.jp
For utility statements defined within a function, the query tree is
copied to a PlannedStmt as utility commands do not require planning.
However, the query ID was missing from the information passed down.
This leads to plugins relying on the query ID like pg_stat_statements to
not be able to track utility statements within function calls. Tests
are added to check this behavior, depending on pg_stat_statements.track.
This is an old bug. Now, query IDs for utilities are compiled using
their parsed trees rather than the query string since v16
(3db72ebcbe), leading to less bloat with utilities, so backpatch down
only to this version.
Author: Anthonin Bonnefoy
Discussion: https://postgr.es/m/CAO6_XqrGp-uwBqi3vBPLuRULKkddjC7R5QZCgsFren=8E+m2Sg@mail.gmail.com
Backpatch-through: 16
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
Commit 6b80394781 introduced integer comparison functions designed
to be as efficient as possible while avoiding overflow. This
commit makes use of these functions in many of the in-tree qsort()
comparators to help ensure transitivity. Many of these comparator
functions should also see a small performance boost.
Author: Mats Kindahl
Reviewed-by: Andres Freund, Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CA%2B14426g2Wa9QuUpmakwPxXFWG_1FaY0AsApkvcTBy-YfS6uaw%40mail.gmail.com
New TAP tests added by commits 9a17be1e and 4710b67d missed to convert
warnings to FATAL. This commit fixes that.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
This patch adds 'stats_since' and 'minmax_stats_since' columns to the
pg_stat_statements view and pg_stat_statements() function. The new min/max
reset mode for the pg_stat_stetments_reset() function is controlled by the
parameter minmax_only.
'stat_since' column is populated with the current timestamp when a new
statement is added to the pg_stat_statements hashtable. It provides clean
information about statistics collection time intervals for each statement.
Besides it can be used by sampling solutions to detect situations when a
statement was evicted and stored again between samples.
Such a sampling solution could derive any pg_stat_statements statistic values
for an interval between two samples with the exception of all min/max
statistics. To address this issue this patch adds the ability to reset
min/max statistics independently of the statement reset using the new
minmax_only parameter of the pg_stat_statements_reset(userid oid, dbid oid,
queryid bigint, minmax_only boolean) function. The timestamp of such reset
is stored in the minmax_stats_since field for each statement.
pg_stat_statements_reset() function now returns the timestamp of a reset as the
result.
Discussion: https://postgr.es/m/flat/72e80e7b160a6eb189df9ef6f068cce3765d37f8.camel%40moonset.ru
Author: Andrei Zubkov
Reviewed-by: Julien Rouhaud, Hayato Kuroda, Yuki Seino, Chengxi Sun
Reviewed-by: Anton Melnikov, Darren Rush, Michael Paquier, Sergei Kornilov
Reviewed-by: Alena Rybakina, Andrei Lepikhov
This is preliminary patch. It adds NOT NULL checking for the result of
pg_stat_statements_reset() function. It is needed for upcoming patch
"Track statement entry timestamp" that will change the result type of
this function to the timestamp of a reset performed.
Discussion: https://postgr.es/m/flat/72e80e7b160a6eb189df9ef6f068cce3765d37f8.camel%40moonset.ru
Author: Andrei Zubkov
Reviewed-by: Julien Rouhaud, Hayato Kuroda, Yuki Seino, Chengxi Sun
Reviewed-by: Anton Melnikov, Darren Rush, Michael Paquier, Sergei Kornilov
Reviewed-by: Alena Rybakina, Andrei Lepikhov
When we decide that we don't want to track execution time of a
specific planner or ProcessUtility call, we still have to increment
the nesting depth, or we'll make the wrong determination of whether
we are at top level when considering nested statements. (PREPARE
and EXECUTE are exceptions, for reasons explained in the code.)
Counting planner nesting depth separately from executor nesting depth
was a mistake: it causes us to make the wrong determination of whether
we are at top level when considering nested statements that get
executed during planning (as a result of constant-folding of
functions, for example). Merge those counters into one.
In passing, get rid of the PGSS_HANDLED_UTILITY macro in favor of
explicitly listing statement types. It seems somewhat coincidental
that PREPARE and EXECUTE are handled alike in each of the places where
that was used: the reasoning tends to be different for each one.
Thus, the macro seems as likely to encourage future bugs as prevent
them, since it's quite unclear whether any future statement type that
might need special-casing here would also need the same choices at
each spot.
Sergei Kornilov, Julien Rouhaud, and Tom Lane, per bug #17552 from
Maxim Boguk. This is pretty clearly a bug fix, but it's also a
behavioral change that might surprise somebody, so no back-patch.
Discussion: https://postgr.es/m/17552-213b534c56ab5d02@postgresql.org
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
This commit adds to pg_stat_statements the two new fields for local
buffers introduced by 295c36c0c1, adding the time spent to read and
write these blocks. These are similar to what is done for temp and
shared blocks. This information available only if track_io_timing is
enabled.
Like for 5a3423ad8e, no version bump is required in the module.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
These two counters, defined in BufferUsage to track respectively the
time spent while reading and writing blocks have historically only
tracked data related to shared buffers, when track_io_timing is enabled.
An upcoming patch to add specific counters for local buffers will take
advantage of this rename as it has come up that no data is currently
tracked for local buffers, and tracking local and shared buffers using
the same fields would be inconsistent with the treatment done for temp
buffers. Renaming the existing fields clarifies what the block type of
each stats field is.
pg_stat_statement is updated to reflect the rename. No extension
version bump is required as 5a3423ad8e has done one, affecting v17~.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
This commit changes the query jumbling of CallStmt so as its IN/OUT
parameters are able to show up as constants with a parameter symbol in
pg_stat_statements, like:
CALL proc1($1, $2);
CALL proc2($1, $2, $3);
The transformed FuncExpr is used in the query ID computation instead of
the FuncCall generated by the parser, so as it is sensitive to the OID
of the procedure and its list of input arguments. The output arguments
are handled in a separate list in CallStmt, which is also included in
the computation.
Tests are added to pg_stat_statements to show how this affects CALL with
IN/OUT parameters as well as overloaded functions.
Like 638d42a3c5 or 31de7e60da, this improves the monitoring of
workloads with a lot of CALL statements, preventing unnecessary bloat
when these use different input (or event output) values.
Author: Sami Imseih
Discussion: https://postgr.es/m/B44FA29D-EBD0-4DD9-ABC2-16F1CB087074@amazon.com
Karina figured out that I (Andres) confused BufferUsage.temp_blks_written with
BufferUsage.local_blks_written in fcdda1e4b5.
Tests in core PG can't easily test this, as BufferUsage is just used for
EXPLAIN (ANALYZE, BUFFERS) and pg_stat_statements. Thus this commit adds tests
for this to pg_stat_statements.
Reported-by: Karina Litskevich <litskevichkarina@gmail.com>
Author: Karina Litskevich <litskevichkarina@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CACiT8ibxXA6+0amGikbeFhm8B84XdQVo6D0Qfd1pQ1s8zpsnxQ@mail.gmail.com
Backpatch: 16-, where fcdda1e4b5 was merged
generation_counter includes time spent on both JIT:ing expressions
and tuple deforming which are configured independently via options
jit_expressions and jit_tuple_deforming. As they are combined in
the same counter it's not apparent what fraction of time the tuple
deforming takes.
This adds deform_counter dedicated to tuple deforming, which allows
seeing more directly the influence jit_tuple_deforming is having on
the query. The counter is exposed in EXPLAIN and pg_stat_statements
bumpin pg_stat_statements to 1.11.
Author: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20220612091253.eegstkufdsu4kfls@erthalion.local
This commit switches query jumbling so as prepared statement names are
treated as constants in DeallocateStmt. A boolean field is added to
DeallocateStmt to make a distinction between ALL and named prepared
statements, as "name" was used to make this difference before, NULL
meaning DEALLOCATE ALL.
Prior to this commit, DEALLOCATE was not tracked in pg_stat_statements,
for the reason that it was not possible to treat its name parameter as a
constant. Now that query jumbling applies to all the utility nodes,
this reason does not apply anymore.
Like 638d42a3c5, this can be a huge advantage for monitoring where
prepared statement names are randomly generated, preventing bloat in
pg_stat_statements. A couple of tests are added to track the new
behavior.
Author: Dagfinn Ilmari Mannsåker, Michael Paquier
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/ZMhT9kNtJJsHw6jK@paquier.xyz
This relies on the "location" field added to TransactionStmt in 31de7e6,
now applied to the "gid" field used by 2PC commands. These commands are
now reported like:
COMMIT PREPARED $1
PREPARE TRANSACTION $1
ROLLBACK PREPARED $1
Applying constants for these commands is a huge advantage for workloads
that rely a lot on 2PC commands with different GIDs. Some tests are
added to track the new behavior.
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/ZMhT9kNtJJsHw6jK@paquier.xyz
In pg_stat_statements, savepoint names now show up as constants with a
parameter symbol, using as base query string the one added as a new
entry to the PGSS hash table, leading to:
RELEASE $1
ROLLBACK TO $1
SAVEPOINT $1
Applying constants to these query parts is a huge advantage for
workloads that generate randomly savepoint points, like ORMs (Django is
at the origin of this patch). The ODBC driver is a second layer that
likes a lot savepoints, though it does not use a random naming pattern.
A "location" field is added to TransactionStmt, now set only for
savepoints. The savepoint name is ignored by the query jumbling. The
location can be extended to other query patterns, if required, like 2PC
commands. Some tests are added to pg_stat_statements for all the query
patterns supported by the parser.
ROLLBACK, ROLLBACK TO SAVEPOINT and ROLLBACK TRANSACTION TO SAVEPOINT
have the same Node representation, so all these are equivalents. The
same happens for RELEASE and RELEASE SAVEPOINT.
Author: Greg Sabino Mullane
Discussion: https://postgr.es/m/CAKAnmm+2s9PA4OaumwMJReWHk8qvJ_-g1WqxDRDAN1BSUfxyTw@mail.gmail.com
pg_stat_statements relies on EState->es_processed to count the number of
rows processed by ExecutorRun(). This proves to be a problem under the
extended query protocol when the result of a query is fetched through
more than one call of ExecutorRun(), as es_processed is reset each time
ExecutorRun() is called. This causes pg_stat_statements to report the
number of rows calculated in the last execute fetch, rather than the
global sum of all the rows processed.
As pquery.c tells, this is a problem when a portal does not use
holdStore. For example, DMLs with RETURNING would report a correct
tuple count as these do one execution cycle when the query is first
executed to fill in the portal's store with one ExecutorRun(), feeding
on the portal's store for each follow-up execute fetch depending on the
fetch size requested by the client.
The fix proposed for this issue is simple with the addition of an extra
counter in EState that's preserved across multiple ExecutorRun() calls,
incremented with the value calculated in es_processed. This approach is
not back-patchable, unfortunately.
Note that libpq does not currently give any way to control the fetch
size when using the extended v3 protocol, meaning that in-core testing
is not possible yet. This issue can be easily verified with the JDBC
driver, though, with *autocommit disabled*. Hence, having in-core tests
requires more features, left for future discussion:
- At least two new libpq routines splitting PQsendQueryGuts(), one for
the bind/describe and a second for a series of execute fetches with a
custom fetch size, likely in a fashion similar to what JDBC does.
- A psql meta-command for the execute phase. This part is not strictly
mandatory, still it could be handy.
Reported-by: Andrew Dunstan (original discovery by Simon Siggs)
Author: Sami Imseih
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/EBE6C507-9EB6-4142-9E4D-38B1673363A7@amazon.com
Discussion: https://postgr.es/m/c90890e7-9c89-c34f-d3c5-d5c763a34bd8@dunslane.net
Applying normalization changes how the following query strings are
reflected in pg_stat_statements, by showing Const nodes with a
dollar-signed parameter as this is how such queries are structured
internally once parsed:
- DECLARE
- EXPLAIN
- CREATE MATERIALIZED VIEW
- CREATE TABLE AS
More normalization could be done in the future depending on the parts
where query jumbling is applied (like A_Const nodes?), the changes being
reflected in the regression tests in majority created in de2aca2. This
just allows the basics to work for utility queries using Const nodes.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y+MRdEq9W9XVa2AB@paquier.xyz
As shaped, two DROP ROLE queries included in "user_activity" were
showing in the reports for "wal". The intention is to keep each test
isolated and independent, so this is incorrect. This commit adds some
calls to pg_stat_statements_reset() to clean up the statistics once each
test finishes, so as there are no risks of overlap in the reports for
individial scenarios.
The addition in "user_activity" fixes the output of "wal". The new
resets done in "level_tracking" and "utility" are added for consistency
with the rest, though they do not affect the stats generated in the
other tests.
Oversight in d0028e3.
Reported-by: Andrei Zubkov
Discussion: https://postgr.es/m/7beb722dd016bf54f1c78bfd6d44a684e28da624.camel@moonset.ru
This commit expands more the refactoring of the regression tests of
pg_stat_statements, with tests moved out of pg_stat_statements.sql into
separate files. The following file structure is now used:
- select is mostly the former pg_stat_statements.sql, renamed.
- dml for INSERT/UPDATE/DELETE and MERGE
- user_activity, to test role-level checks and stat resets.
- wal, to check the WAL generation after some queries.
Like e8dbdb1, there is no change in terms of code coverage or results,
and this finishes the split I was aiming for in these tests. Most of
the tests used "test" of "pgss_test" as names for the tables used, these
are renamed to less generic names.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y/7Y9U/y/keAW3qH@paquier.xyz
This commit adds more coverage for utility statements so as it is
possible to track down all the effects of query normalization done for
all the queries that use either Const or A_Const nodes, which are the
nodes where normalization makes the most sense as they apply to
constants (well, most of the time, really).
This set of queries is extracted from an analysis done while looking at
full dumps of the regression database when applying different levels of
normalization to either Const or A_Const nodes for utilities, as of a
minimal set of these, for:
- All relkinds (CREATE, ALTER, DROP)
- Policies
- Cursors
- Triggers
- Types
- Rules
- Statistics
- CALL
- Transaction statements (isolation level, options)
- EXPLAIN
- COPY
Note that pg_stat_statements is not switched yet to show any
normalization for utilities, still it improves the default coverage of
the query jumbling code (not by as much as enabling query jumbling on
the main regression test suite, though):
- queryjumblefuncs.funcs.c: 36.8% => 48.5%
- queryjumblefuncs.switch.c: 33.2% => 43.1%
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y+MRdEq9W9XVa2AB@paquier.xyz
pg_stat_statements.sql acts as the main file for all the core tests of
the module, but things have become complicated to follow over the years
as some of the sub-scenarios tested in this file rely on assumptions
that come from completely different areas of it, like a GUC setup or a
relation created previously. For example, row tracking for CTAS/COPY
was looking at the number of plans, which was not necessary, or level
tracking was mixed with checks on planner counts.
This commit refactors the tests of pg_stat_statements, by moving test
cases out of pg_stat_statements.sql into their own file, as of:
- Planning-related tests in planning.sql, for [re]plan counts and
top-level handling. These depend on pg_stat_statements.track_planning.
- Utilities in utility.sql (pg_stat_statements.track_utility), that
includes now the tests for:
-- Row tracking for CTAS, CREATE MATERIALIZED VIEW, COPY.
-- Basic utility statements.
-- SET statements.
- Tracking level, depending on pg_stat_statements.track. This part has
been looking at scenarios with DO blocks, PL functions and SQL
functions.
pg_stat_statements.sql (still named the same for now) still includes
some checks for role-level tracking and WAL generation metrics, that
ought to become independent in the long term for clarity.
While on it, this switches the order of the attributes when querying
pg_stat_statements, the query field becoming last. This makes much
easier the tracking of changes related to normalization, as queries are
the only variable-length attributes queried (unaligned mode would be one
extra choice, but that reduces the checks on the other fields).
Test scenarios and their results match exactly with what was happening
before this commit in terms of calls, number of plans, number of rows,
cached data or level tracking, so this has no effect on the coverage in
terms of what is produced by the reports in the table
pg_stat_statements. A follow-up patch will extend more the tests of
pg_stat_statements around utilities, so this split creates a foundation
for this purpose, without complicating more pg_stat_statements.sql.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y+MRdEq9W9XVa2AB@paquier.xyz
Like the implementation for node copy, write and read, this node
requires a custom implementation so as the query jumbling is able to
consider the correct value assigned to it, depending on its type (int,
float, bool, string, bitstring).
Based on a dump of pg_stat_statements from the regression database, this
would confuse the query jumbling of the following queries:
- SET.
- COPY TO with SELECT queries.
- START TRANSACTION with different isolation levels.
- ALTER TABLE with default expressions.
- CREATE TABLE with partition bounds.
Note that there may be a long-term argument in tracking the location of
such nodes so as query strings holding such nodes could be normalized,
but this is left as a separate discussion.
Oversight in 3db72eb.
Discussion: https://postgr.es/m/Y9+HuYslMAP6yyPb@paquier.xyz
This commit changes the query jumbling code in queryjumblefuncs.c to be
generated automatically based on the information of the nodes in the
headers of src/include/nodes/ by using gen_node_support.pl. This
approach offers many advantages:
- Support for query jumbling for all the utility statements, based on the
state of their parsed Nodes and not only their query string. This will
greatly ease the switch to normalize the information of some DDLs, like
SET or CALL for example (this is left unchanged and should be part of a
separate discussion). With this feature, the number of entries stored
for utilities in pg_stat_statements is reduced (for example now
"CHECKPOINT" and "checkpoint" mean the same thing with the same query
ID).
- Documentation of query jumbling directly in the structure definition
of the nodes. Since this code has been introduced in pg_stat_statements
and then moved to code, the reasons behind the choices of what should be
included in the jumble are rather sparse. Note that some explanation is
added for the most relevant parts, as a start.
- Overall code reduction and more consistency with the other parts
generating read, write and copy depending on the nodes.
The query jumbling is controlled by a couple of new node attributes,
documented in nodes/nodes.h:
- custom_query_jumble, to mark a Node as having a custom
implementation.
- no_query_jumble, to ignore entirely a Node.
- query_jumble_ignore, to ignore a field in a Node.
- query_jumble_location, to mark a location in a Node, for
normalization. This can apply only to int fields, with "location" in
their name (only Const as of this commit).
There should be no compatibility impact on pg_stat_statements, as the
new code applies the jumbling to the same fields for each node (its
regression tests have no modification, for one).
Some benchmark of the query jumbling between HEAD and this commit for
SELECT and DMLs has proved that this new code does not cause a
performance regression, with computation times close for both methods.
For utility queries, the new method is slower than the previous method
of calculating a hash of the query string, though we are talking about
extra ns-level changes based on what I measured, which is unnoticeable
even for OLTP workloads as a query ID is calculated once per query
post-parse analysis.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
Michael Paquier