This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
Clarify the docs explaining what commit_delay does, and add a
recommendation about a useful value for it, namely half of the single-page
fsync time reported by pg_test_fsync. This is informed by testing of
the new-in-9.3 implementation of commit_delay; in prior versions it
was far harder to arrive at a useful setting.
In passing, do some wordsmithing and markup-fixing in the same general
area.
Also, change pg_test_fsync's default time-per-test from 2 seconds to 5.
The old value was about the minimum at which the results could be taken
seriously at all, and so seems a tad optimistic as a default.
Peter Geoghegan, reviewed by Noah Misch; some additional editing by me
There's still some discussion about exactly how postgres_fdw ought to
handle this case, but there seems no debate that we want to allow defaults
to be used for inserts into foreign tables. So remove the core-code
restrictions that prevented it.
While at it, get rid of the special grammar productions for CREATE FOREIGN
TABLE, and instead add explicit FEATURE_NOT_SUPPORTED error checks for the
disallowed cases. This makes the grammar a shade smaller, and more
importantly results in much more intelligible error messages for
unsupported cases. It's also one less thing to fix if we ever start
supporting constraints on foreign tables.
Apparently I lost some of the edits I had done on this page for commit
0ac5ad5134.
Per note from Etsuro Fujita, although I didn't use his patch.
Make some of the wording in the affected section a bit more complete,
too.
This adds the following:
json_agg(anyrecord) -> json
to_json(any) -> json
hstore_to_json(hstore) -> json (also used as a cast)
hstore_to_json_loose(hstore) -> json
The last provides heuristic treatment of numbers and booleans.
Also, in json generation, if any non-builtin type has a cast to json,
that function is used instead of the type's output function.
Andrew Dunstan, reviewed by Steve Singer.
Catalog version bumped.
This patch adds the core-system infrastructure needed to support updates
on foreign tables, and extends contrib/postgres_fdw to allow updates
against remote Postgres servers. There's still a great deal of room for
improvement in optimization of remote updates, but at least there's basic
functionality there now.
KaiGai Kohei, reviewed by Alexander Korotkov and Laurenz Albe, and rather
heavily revised by Tom Lane.
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
This includes backend "COPY TO/FROM PROGRAM '...'" syntax, and corresponding
psql \copy syntax. Like with reading/writing files, the backend version is
superuser-only, and in the psql version, the program is run in the client.
In the passing, the psql \copy STDIN/STDOUT syntax is subtly changed: if you
the stdin/stdout is quoted, it's now interpreted as a filename. For example,
"\copy foo from 'stdin'" now reads from a file called 'stdin', not from
standard input. Before this, there was no way to specify a filename called
stdin, stdout, pstdin or pstdout.
This creates a new function in pgport, wait_result_to_str(), which can
be used to convert the exit status of a process, as returned by wait(3),
to a human-readable string.
Etsuro Fujita, reviewed by Amit Kapila.
Like with pg_basebackup and pg_receivexlog, it's a bit strange to call the
option -d/--dbname, when in fact you cannot pass a database name in it.
Original patch by Amit Kapila, heavily modified by me.
You could already pass a database name just by passing it as the last
option, without -d. This is an alias for that, like the -d/--dbname option
in psql and many other client applications. For consistency.
Without this, there's no way to pass arbitrary libpq connection parameters
to these applications. It's a bit strange that the option is called
-d/--dbname, when in fact you can *not* pass a database name in it, but it's
consistent with other client applications where a connection string is also
passed using -d.
Original patch by Amit Kapila, heavily modified by me.
This program relies on rm_desc backend routines and the xlogreader
infrastructure to emit human-readable rendering of WAL records.
Author: Andres Freund, with many reworks by Álvaro
Reviewed (in a much earlier version) by Peter Eisentraut
There's still a lot of room for improvement, but it basically works,
and we need this to be present before we can do anything much with the
writable-foreign-tables patch. So let's commit it and get on with testing.
Shigeru Hanada, reviewed by KaiGai Kohei and Tom Lane
This generalizes the existing ALTER ROLE ... SET and ALTER DATABASE
... SET functionality to allow creating settings that apply to all users
in all databases.
reviewed by Pavel Stehule
The reason this wasn't supported before was that GiST indexes need an
increasing sequence to detect concurrent page-splits. In a regular WAL-
logged GiST index, the LSN of the page-split record is used for that
purpose, and in a temporary index, we can get away with a backend-local
counter. Neither of those methods works for an unlogged relation.
To provide such an increasing sequence of numbers, create a "fake LSN"
counter that is saved and restored across shutdowns. On recovery, unlogged
relations are blown away, so the counter doesn't need to survive that
either.
Jeevan Chalke, based on discussions with Robert Haas, Tom Lane and me.
Improve description of the vacuum_freeze_table_age bug (it's much more
serious than we realized at the time the fix was committed), and correct
attribution of pg_upgrade -O/-o fix (Marti Raudsepp contributed that,
but Bruce forgot to credit him in the commit log).
No need to back-patch right now, it'll happen when the next set of
release notes are prepared.
Instead of hardcoding a specific link, give a general link to the
download section of the web site. This gives the user more download
options and the sysadmins more flexibility. Also, the previously
presented link didn't work for devel versions.
This function was misdeclared to take cstring when it should take internal.
This at least allows crashing the server, and in principle an attacker
might be able to use the function to examine the contents of server memory.
The correct fix is to adjust the system catalog contents (and fix the
regression tests that should have caught this but failed to). However,
asking users to correct the catalog contents in existing installations
is a pain, so as a band-aid fix for the back branches, install a check
in enum_recv() to make it throw error if called with a cstring argument.
We will later revert this in HEAD in favor of correcting the catalogs.
Our thanks to Sumit Soni (via Secunia SVCRP) for reporting this issue.
Security: CVE-2013-0255
This patch changes pg_get_viewdef() and allied functions so that
PRETTY_INDENT processing is always enabled. Per discussion, only the
PRETTY_PAREN processing (that is, stripping of "unnecessary" parentheses)
poses any real forward-compatibility risk, so we may as well make dump
output look as nice as we safely can.
Also, set the default wrap length to zero (i.e, wrap after each SELECT
or FROM list item), since there's no very principled argument for the
former default of 80-column wrapping, and most people seem to agree this
way looks better.
Marko Tiikkaja, reviewed by Jeevan Chalke, further hacking by Tom Lane
In the previous coding, psql's state variable saying that output should
go to a file was only reset after successful completion of a query
returning tuples. Thus for example,
regression=# select 1/0
regression-# \g somefile
ERROR: division by zero
regression=# select 1/2;
regression=#
... huh, I wonder where that output went. Even more oddly, the state
was not reset even if it's the file that's causing the failure:
regression=# select 1/2 \g /foo
/foo: Permission denied
regression=# select 1/2;
/foo: Permission denied
regression=# select 1/2;
/foo: Permission denied
This seems to me not to satisfy the principle of least surprise.
\g is certainly not documented in a way that suggests its effects are
at all persistent.
To fix, adjust the code so that the flag is reset at exit from SendQuery
no matter what happened.
Noted while reviewing the \gset patch, which had comparable issues.
Arguably this is a bug fix, but I'll refrain from back-patching for now.
This is specified in the SQL standard. The CREATE RECURSIVE VIEW
specification is transformed into a normal CREATE VIEW statement with a
WITH RECURSIVE clause.
reviewed by Abhijit Menon-Sen and Stephen Frost
The new option specifies length of aggregation interval (in
seconds). May be used only together with -l. With this option, the log
contains per-interval summary (number of transactions, min/max latency
and two additional fields useful for variance estimation).
Patch contributed by Tomas Vondra, reviewed by Pavel Stehule. Slight
change by Tatsuo Ishii, suggested by Robert Hass to emit an error
message indicating that the option is not currently supported on
Windows.
This patch addresses the problem that applications currently have to
extract object names from possibly-localized textual error messages,
if they want to know for example which index caused a UNIQUE_VIOLATION
failure. It adds new error message fields to the wire protocol, which
can carry the name of a table, table column, data type, or constraint
associated with the error. (Since the protocol spec has always instructed
clients to ignore unrecognized field types, this should not create any
compatibility problem.)
Support for providing these new fields has been added to just a limited set
of error reports (mainly, those in the "integrity constraint violation"
SQLSTATE class), but we will doubtless add them to more calls in future.
Pavel Stehule, reviewed and extensively revised by Peter Geoghegan, with
additional hacking by Tom Lane.
Beyond 21474, the number of accounts exceed the range for int4. Change the
initialization code to use bigint for account id columns when scale is large
enough, and switch to using int64s for the variables in pgbench code. The
threshold where we switch to bigints is set at 20000, because that's easier
to remember and document than 21474, and ensures that there is some headroom
when int4s are used.
Greg Smith, with various changes by Euler Taveira de Oliveira, Gurjeet
Singh and Satoshi Nagayasu.
Tom Lane