Up to now, only ECONNRESET (and EPIPE, in most but not quite all places)
received special treatment in our error handling logic. This patch
changes things so that related error codes such as ECONNABORTED are
also recognized as indicating that the connection's dead and unlikely
to come back.
We continue to think, however, that only ECONNRESET and EPIPE should be
reported as probable server crashes; the other cases indicate network
connectivity problems but prove little about the server's state. Thus,
there's no change in the error message texts that are output for such
cases. The key practical effect is that errcode_for_socket_access()
will report ERRCODE_CONNECTION_FAILURE rather than
ERRCODE_INTERNAL_ERROR for a network failure. It's expected that this
will fix buildfarm member lorikeet's failures since commit 32a9c0bdf,
as that seems to be due to not treating ECONNABORTED equivalently to
ECONNRESET.
The set of errnos treated this way now includes ECONNABORTED, EHOSTDOWN,
EHOSTUNREACH, ENETDOWN, ENETRESET, and ENETUNREACH. Several of these
were second-class citizens in terms of their handling in places like
get_errno_symbol(), so upgrade the infrastructure where necessary.
As committed, this patch assumes that all these symbols are defined
everywhere. POSIX specifies all of them except EHOSTDOWN, but that
seems to exist on all platforms of interest; we'll see what the
buildfarm says about that.
Probably this should be back-patched, but let's see what the buildfarm
thinks of it first.
Fujii Masao and Tom Lane
Discussion: https://postgr.es/m/2621622.1602184554@sss.pgh.pa.us
Commit 54cd4f045 added some kluges to work around an old glibc bug,
namely that %.*s could misbehave if glibc thought any characters in
the supplied string were incorrectly encoded. Now that we use our
own snprintf.c implementation, we need not worry about that bug (even
if it still exists in the wild). Revert a couple of particularly
ugly hacks, and remove or improve assorted comments.
Note that there can still be encoding-related hazards here: blindly
clipping at a fixed length risks producing wrongly-encoded output
if the clip splits a multibyte character. However, code that's
doing correct multibyte-aware clipping doesn't really need a comment
about that, while code that isn't needs an explanation why not,
rather than a red-herring comment about an obsolete bug.
Discussion: https://postgr.es/m/279428.1593373684@sss.pgh.pa.us
Even when we've concluded that we have a hard write failure on the
socket, we should continue to try to read data. This gives us an
opportunity to collect any final error message that the backend might
have sent before closing the connection; moreover it is the job of
pqReadData not pqSendSome to close the socket once EOF is detected.
Due to an oversight in 1f39a1c06, pqSendSome failed to try to collect
data in the case where we'd already set write_failed. The problem was
masked for ordinary query operations (which really only make one write
attempt anyway), but COPY to the server would continue to send data
indefinitely after a mid-COPY connection loss.
Hence, add pqReadData calls into the paths where pqSendSome drops data
because of write_failed. If we've lost the connection, this will
eventually result in closing the socket and setting CONNECTION_BAD,
which will cause PQputline and siblings to report failure, allowing
the application to terminate the COPY sooner. (Basically this restores
what happened before 1f39a1c06.)
There are related issues that this does not solve; for example, if the
backend sends an error but doesn't drop the connection, we did and
still will keep pumping COPY data as long as the application sends it.
Fixing that will require application-visible behavior changes though,
and anyway it's an ancient behavior that we've had few complaints about.
For now I'm just trying to fix the regression from 1f39a1c06.
Per a complaint from Andres Freund. Back-patch into v12 where
1f39a1c06 came in.
Discussion: https://postgr.es/m/20200603201242.ofvm4jztpqytwfye@alap3.anarazel.de
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
pgtls_read_pending is declared to return bool, but what the underlying
SSL_pending function returns is a count of available bytes.
This is actually somewhat harmless if we're using C99 bools, but in
the back branches it's a live bug: if the available-bytes count happened
to be a multiple of 256, it would get converted to a zero char value.
On machines where char is signed, counts of 128 and up could misbehave
as well. The net effect is that when using SSL, libpq might block
waiting for data even though some has already been received.
Broken by careless refactoring in commit 4e86f1b16, so back-patch
to 9.5 where that came in.
Per bug #15802 from David Binderman.
Discussion: https://postgr.es/m/15802-f0911a97f0346526@postgresql.org
Originally, if libpq got a failure (e.g., ECONNRESET) while trying to
send data to the server, it would just report that and wash its hands
of the matter. It was soon found that that wasn't a very pleasant way
of coping with server-initiated disconnections, so we introduced a hack
(pqHandleSendFailure) in the code that sends queries to make it peek
ahead for server error reports before reporting the send failure.
It now emerges that related cases can occur during connection setup;
in particular, as of TLS 1.3 it's unsafe to assume that SSL connection
failures will be reported by SSL_connect rather than during our first
send attempt. We could have fixed that in a hacky way by applying
pqHandleSendFailure after a startup packet send failure, but
(a) pqHandleSendFailure explicitly disclaims suitability for use in any
state except query startup, and (b) the problem still potentially exists
for other send attempts in libpq.
Instead, let's fix this in a more general fashion by eliminating
pqHandleSendFailure altogether, and instead arranging to postpone
all reports of send failures in libpq until after we've made an
attempt to read and process server messages. The send failure won't
be reported at all if we find a server message or detect input EOF.
(Note: this removes one of the reasons why libpq typically overwrites,
rather than appending to, conn->errorMessage: pqHandleSendFailure needed
that behavior so that the send failure report would be replaced if we
got a server message or read failure report. Eventually I'd like to get
rid of that overwrite behavior altogether, but today is not that day.
For the moment, pqSendSome is assuming that its callees will overwrite
not append to conn->errorMessage.)
Possibly this change should get back-patched someday; but it needs
testing first, so let's not consider that till after v12 beta.
Discussion: https://postgr.es/m/CAEepm=2n6Nv+5tFfe8YnkUm1fXgvxR0Mm1FoD+QKG-vLNGLyKg@mail.gmail.com
This provides the features that used to exist in useful_strerror()
for users of strerror_r(), too. Also, standardize on the GNU convention
that strerror_r returns a char pointer that may not be NULL.
I notice that libpq's win32.c contains a variant version of strerror_r
that probably ought to be folded into strerror.c. But lacking a
Windows environment, I should leave that to somebody else.
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
All postgres internal usages are replaced, it's just libpq example
usages that haven't been converted. External users of libpq can't
generally rely on including postgres internal headers.
Note that this includes replacing open-coded byte swapping of 64bit
integers (using two 32 bit swaps) with a single 64bit swap.
Where it looked applicable, I have removed netinet/in.h and
arpa/inet.h usage, which previously provided the relevant
functionality. It's perfectly possible that I missed other reasons for
including those, the buildfarm will tell.
Author: Andres Freund
Discussion: https://postgr.es/m/20170927172019.gheidqy6xvlxb325@alap3.anarazel.de
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
If one host in a multi-host connection string times out, move on to
the next specified host instead of giving up entirely.
Takayuki Tsunakawa, reviewed by Michael Paquier. I added
a minor adjustment to the documentation.
Discussion: http://postgr.es/m/0A3221C70F24FB45833433255569204D1F6F42F5@G01JPEXMBYT05
poll.h is mandated by Single Unix Spec v2, the usual baseline for
postgres on unix. None of the unixoid buildfarms animals has
sys/poll.h but not poll.h. Therefore there's not much point to test
for sys/poll.h's existence and include it optionally.
Author: Andres Freund, per suggestion from Tom Lane
Discussion: https://postgr.es/m/20505.1492723662@sss.pgh.pa.us
In commit 210eb9b743 I centralized libpq's logic for closing down
the backend communication socket, and made the new pqDropConnection
routine always reset the I/O buffers to empty. Many of the call sites
previously had not had such code, and while that amounted to an oversight
in some cases, there was one place where it was intentional and necessary
*not* to flush the input buffer: pqReadData should never cause that to
happen, since we probably still want to process whatever data we read.
This is the true cause of the problem Robert was attempting to fix in
c3e7c24a1d, namely that libpq no longer reported the backend's final
ERROR message before reporting "server closed the connection unexpectedly".
But that only accidentally fixed it, by invoking parseInput before the
input buffer got flushed; and very likely there are timing scenarios
where we'd still lose the message before processing it.
To fix, pass a flag to pqDropConnection to tell it whether to flush the
input buffer or not. On review I think flushing is actually correct for
every other call site.
Back-patch to 9.3 where the problem was introduced. In HEAD, also improve
the comments added by c3e7c24a1d.
If libpq output buffer is full, pqSendSome() function tries to drain any
incoming data. This avoids deadlock, if the server e.g. sends a lot of
NOTICE messages, and blocks until we read them. However, pqSendSome() only
did that in blocking mode. In non-blocking mode, the deadlock could still
happen.
To fix, take a two-pronged approach:
1. Change the documentation to instruct that when PQflush() returns 1, you
should wait for both read- and write-ready, and call PQconsumeInput() if it
becomes read-ready. That fixes the deadlock, but applications are not going
to change overnight.
2. In pqSendSome(), drain the input buffer before returning 1. This
alleviates the problem for applications that only wait for write-ready. In
particular, a slow but steady stream of NOTICE messages during COPY FROM
STDIN will no longer cause a deadlock. The risk remains that the server
attempts to send a large burst of data and fills its output buffer, and at
the same time the client also sends enough data to fill its output buffer.
The application will deadlock if it goes to sleep, waiting for the socket
to become write-ready, before the server's data arrives. In practice,
NOTICE messages and such that the server might be sending are usually
short, so it's highly unlikely that the server would fill its output buffer
so quickly.
Backpatch to all supported versions.
The EOF-detection logic in pqReadData was a bit confused about who should
set up the error message in case the kernel gives us read-ready-but-no-data
rather than ECONNRESET or some other explicit error condition. Since the
whole point of this situation is that the lower-level functions don't know
there's anything wrong, pqReadData itself must set up the message. But
keep the assumption that if an errno was reported, a message was set up at
lower levels.
Per bug #11712 from Marko Tiikkaja. It's been like this for a very long
time, so back-patch to all supported branches.
This patch makes libpq check the server's hostname against DNS names listed
in the X509 subjectAltName extension field in the server certificate. This
allows the same certificate to be used for multiple domain names. If there
are no SANs in the certificate, the Common Name field is used, like before
this patch. If both are given, the Common Name is ignored. That is a bit
surprising, but that's the behavior mandated by the relevant RFCs, and it's
also what the common web browsers do.
This also adds a libpq_ngettext helper macro to allow plural messages to be
translated in libpq. Apparently this happened to be the first plural message
in libpq, so it was not needed before.
Alexey Klyukin, with some kibitzing by me.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
Based on the old comment, it took me a while to figure out what the
problem was. The importnat detail is that SSL_read() can return WANT_READ
even though some raw data was received from the socket.
If the server sends a long stream of data, and the server + network are
consistently fast enough to force the recv() loop in pqReadData() to
iterate until libpq's input buffer is full, then upon processing the last
incomplete message in each bufferload we'd usually double the buffer size,
due to supposing that we didn't have enough room in the buffer to finish
collecting that message. After filling the newly-enlarged buffer, the
cycle repeats, eventually resulting in an out-of-memory situation (which
would be reported misleadingly as "lost synchronization with server").
Of course, we should not enlarge the buffer unless we still need room
after discarding already-processed messages.
This bug dates back quite a long time: pqParseInput3 has had the behavior
since perhaps 2003, getCopyDataMessage at least since commit 70066eb1a1
in 2008. Probably the reason it's not been isolated before is that in
common environments the recv() loop would always be faster than the server
(if on the same machine) or faster than the network (if not); or at least
it wouldn't be slower consistently enough to let the buffer ramp up to a
problematic size. The reported cases involve Windows, which perhaps has
different timing behavior than other platforms.
Per bug #7914 from Shin-ichi Morita, though this is different from his
proposed solution. Back-patch to all supported branches.
Previously, 'int' was used for socket values in libpq, but socket values
are unsigned on Windows. This is a style correction.
Initial patch and previous PGINVALID_SOCKET initial patch by Joel
Jacobson, modified by me
Report from PVS-Studio
In pqSendSome, if the connection is already closed at entry, discard any
queued output data before returning. There is no possibility of ever
sending the data, and anyway this corresponds to what we'd do if we'd
detected a hard error while trying to send(). This avoids possible
indefinite bloat of the output buffer if the application keeps trying
to send data (or even just keeps trying to do PQputCopyEnd, as psql
indeed will).
Because PQputCopyEnd won't transition out of PGASYNC_COPY_IN state
until it's successfully queued the COPY END message, and pqPutMsgEnd
doesn't distinguish a queuing failure from a pqSendSome failure,
this omission allowed an infinite loop in psql if the connection closure
occurred when we had at least 8K queued to send. It might be worth
refactoring so that we can make that distinction, but for the moment
the other changes made here seem to offer adequate defenses.
To guard against other variants of this scenario, do not allow
PQgetResult to return a PGRES_COPY_XXX result if the connection is
already known dead. Make sure it returns PGRES_FATAL_ERROR instead.
Per report from Stephen Frost. Back-patch to all active branches.
We had two copies of this function in the backend and libpq, which was
already pretty bogus, but it turns out that we need it in some other
programs that don't use libpq (such as pg_test_fsync). So put it where
it probably should have been all along. The signal-mask-initialization
support in src/backend/libpq/pqsignal.c stays where it is, though, since
we only need that in the backend.
Create an internal function pqDropConnection that does the physical socket
close and cleans up closely-associated state. This removes a bunch of ad
hoc, not always consistent closure code. The ulterior motive is to have a
single place to wait for a spawned child backend to exit, but this seems
like good cleanup even if that never happens.
I went back and forth on whether to include "conn->status = CONNECTION_BAD"
in pqDropConnection's actions, but for the moment decided not to. Only a
minority of the call sites actually want that, and in any case it's
arguable that conn->status is slightly higher-level state, and thus not
part of this function's purview.
Traditionally libpq has collected an entire query result before passing
it back to the application. That provides a simple and transactional API,
but it's pretty inefficient for large result sets. This patch allows the
application to process each row on-the-fly instead of accumulating the
rows into the PGresult. Error recovery becomes a bit more complex, but
often that tradeoff is well worth making.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
On balance, the need to cover this case changes my mind in favor of pushing
all error-message generation duties into the two fe-secure.c routines.
So do it that way.
In many cases, pqsecure_read/pqsecure_write set up useful error messages,
which were then overwritten with useless ones by their callers. Fix this
by defining the responsibility to set an error message to be entirely that
of the lower-level function when using SSL.
Back-patch to 8.3; the code is too different in 8.2 to be worth the
trouble.
This function is like the PQserverVersion() function except
it returns the version of libpq, making it possible for a client
program or driver to determine which version of libpq is in
use at runtime, and not just at link time.
Suggested by Harald Armin Massa and several others.
My initial impression that glibc was measuring the precision in characters
(which is what the Linux man page says it does) was incorrect. It does take
the precision to be in bytes, but it also tries to truncate the string at a
character boundary. The bottom line remains the same: it will mess up
if the string is not in the encoding it expects, so we need to avoid %.*s
anytime there's a significant risk of that. Previous code changes are still
good, but adjust the comments to reflect this knowledge. Per research by
Hernan Gonzalez.
Tom Lane