File::Find converts backslashes to slashes in the newer Perl versions.
See: 414f14df98
So, do the same conversion for Windows before comparing paths. To
support all Perl versions, always convert them on Windows regardless of
the Perl's version.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Backpatch to all live branches
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
The five modules in our TAP test framework all had names in the top
level namespace. This is unwise because, even though we're not
exporting them to CPAN, the names can leak, for example if they are
exported by the RPM build process. We therefore move the modules to the
PostgreSQL::Test namespace. In the process PostgresNode is renamed to
Cluster, and TestLib is renamed to Utils. PostgresVersion becomes simply
PostgreSQL::Version, to avoid possible confusion about what it's the
version of.
Discussion: https://postgr.es/m/aede93a4-7d92-ef26-398f-5094944c2504@dunslane.net
Reviewed by Erik Rijkers and Michael Paquier
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
On Windows, a filename cannot contain backslashes, because a backslash
is used directory separator. Remove tests I added in commit 9c4f5192f
that tried to do that. We could perhaps use a SKIP block to only skip
them on Windows, but I'm not sure how exactly to formulate that, so just
remove the tests to make the buildfarm green again.
Per buildfarm.
Using a hot standby server as the source has not been possible, because
pg_rewind creates a temporary table in the source system, to hold the
list of file ranges that need to be fetched. Refactor it to queue up the
file fetch requests in pg_rewind's memory, so that the temporary table
is no longer needed.
Also update the logic to compute 'minRecoveryPoint' correctly, when the
source is a standby server.
Reviewed-by: Kyotaro Horiguchi, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/0c5b3783-af52-3ee5-f8fa-6e794061f70d%40iki.fi
The modules RewindTest.pm and ServerSetup.pm are really only useful for
TAP tests, so they really belong in the TAP test directories. In
addition, ServerSetup.pm is renamed to SSLServer.pm.
The test scripts have their own directories added to the search path so
that the relocated modules will be found, regardless of where the tests
are run from, even on modern perl where "." is no longer in the
searchpath.
Discussion: https://postgr.es/m/e4b0f366-269c-73c3-9c90-d9cb0f4db1f9@2ndQuadrant.com
Backpatch as appropriate to 9.5
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
The vertical tightness settings collapse vertical whitespace between
opening and closing brackets (parentheses, square brakets and braces).
This can make data structures in particular harder to read, and is not
very consistent with our style in non-Perl code. This patch restricts
that setting to parentheses only, and reformats all the perl code
accordingly. Not applying this to parentheses has some unfortunate
effects, so the consensus is to keep the setting for parentheses and not
for the others.
The diff for this patch does highlight some places where structures
should have trailing commas. They can be added manually, as there is no
automatic tool to do so.
Discussion: https://postgr.es/m/a2f2b87c-56be-c070-bfc0-36288b4b41c1@2ndQuadrant.com
This moves the data directories from using temporary directories with
randomness in the directory name to a static name, to make it easier to
debug. The data directory will be retained if tests fail or the test
code dies/exits with failure, and is automatically removed on the next
make check.
If the environment variable PG_TEST_NOCLEAN is defined, the data
directories will be retained regardless of test or exit status.
Author: Daniel Gustafsson <daniel@yesql.se>
The original code was a bit clunky; make it more amenable for further
reuse by creating a new Perl package PostgresNode, which is an
object-oriented representation of a single server, with some support
routines such as init, start, stop, psql. This serves as a better basis
on which to build further test code, and enables writing tests that use
more than one server without too much complication.
This commit modifies a lot of the existing test files, mostly to remove
explicit calls to system commands (pg_ctl) replacing them with method
calls of a PostgresNode object. The result is quite a bit more
straightforward.
Also move some initialization code to BEGIN and INIT blocks instead of
having it straight in as top-level code.
This commit also introduces package RecursiveCopy so that we can copy
whole directories without having to depend on packages that may not be
present on vanilla Perl 5.8 installations.
I also ran perltidy on the modified files, which changes some code sites
that are not otherwise touched by this patch. I tried to avoid this,
but it ended up being more trouble than it's worth.
Authors: Michael Paquier, Álvaro Herrera
Review: Noah Misch
pg_xlog is often a symlink, typically to a different filesystem. Don't
get confused and comlain about by that, and just always pretend that it's a
normal directory, even if it's really a symlink.
Also add a test case for this.
Backpatch to 9.5.
Create a log file for each test run. Stdout and stderr of the test script,
as well as any subprocesses run as part of the test, are redirected to
the log file. This makes it a lot easier to debug test failures. Also print
the test output (ok 12 - ... messages) to the log file, and the command
line of any external programs executed with the system_or_bail and run_log
functions. This makes it a lot easier to debug failing tests.
Modify some of the pg_ctl and other command invocations to not use 'silent'
or 'quiet' options, and don't redirect output to /dev/null, so that you get
all the information in the log instead.
In the passing, construct some command lines in a way that works if $tempdir
contains quote-characters. I haven't systematically gone through all of
them or tested that, so I don't know if this is enough to make that work.
pg_rewind tests had a custom mechanism for creating a similar log file. Use
the new generic facility instead.
Michael Paquier and me.
Now that the test servers are initialized twice in each .pl script,
the single END block is not enough to stop them. Add a new clean_rewind_test
function that is called at the end of each test.
Michael Paquier
* Don't pass arguments to prove, since that's not supported on perl 5.8
which is the minimum version supported by the TAP tests. Refactor the
test files themselves to run the tests twice, in both local and remote mode.
* Use eq rather than == for string comparison. This thinko caused the remote
versions of the tests to never run.
* Add "use strict" and "use warnings", and fix warnings that that produced.
* Increase the delay after standby promotion, to make the tests more robust.
* In remote mode, the connection string to the promoted standby was
incorrect, leading to connection errors.
Patch by Michael Paquier, to address Peter Eisentraut's report.
Earlier versions of this tool were available (and still are) on github.
Thanks to Michael Paquier, Alvaro Herrera, Peter Eisentraut, Amit Kapila,
and Satoshi Nagayasu for review.
Andrew Dunstan