ORDER BY / DISTINCT aggreagtes have, since implemented in Postgres, been
executed by always performing a sort in nodeAgg.c to sort the tuples in
the current group into the correct order before calling the transition
function on the sorted tuples. This was not great as often there might be
an index that could have provided pre-sorted input and allowed the
transition functions to be called as the rows come in, rather than having
to store them in a tuplestore in order to sort them once all the tuples
for the group have arrived.
Here we change the planner so it requests a path with a sort order which
supports the most amount of ORDER BY / DISTINCT aggregate functions and
add new code to the executor to allow it to support the processing of
ORDER BY / DISTINCT aggregates where the tuples are already sorted in the
correct order.
Since there can be many ORDER BY / DISTINCT aggregates in any given query
level, it's very possible that we can't find an order that suits all of
these aggregates. The sort order that the planner chooses is simply the
one that suits the most aggregate functions. We take the most strictly
sorted variation of each order and see how many aggregate functions can
use that, then we try again with the order of the remaining aggregates to
see if another order would suit more aggregate functions. For example:
SELECT agg(a ORDER BY a),agg2(a ORDER BY a,b) ...
would request the sort order to be {a, b} because {a} is a subset of the
sort order of {a,b}, but;
SELECT agg(a ORDER BY a),agg2(a ORDER BY c) ...
would just pick a plan ordered by {a} (we give precedence to aggregates
which are earlier in the targetlist).
SELECT agg(a ORDER BY a),agg2(a ORDER BY b),agg3(a ORDER BY b) ...
would choose to order by {b} since two aggregates suit that vs just one
that requires input ordered by {a}.
Author: David Rowley
Reviewed-by: Ronan Dunklau, James Coleman, Ranier Vilela, Richard Guo, Tom Lane
Discussion: https://postgr.es/m/CAApHDvpHzfo92%3DR4W0%2BxVua3BUYCKMckWAmo-2t_KiXN-wYH%3Dw%40mail.gmail.com
When postgres_fdw begins an asynchronous data fetch, it submits FETCH query
by using PQsendQuery(). If PQsendQuery() fails and returns 0, postgres_fdw
should report an error. But, previously, postgres_fdw reported an error
only when the return value is less than 0, though PQsendQuery() never return
the values other than 0 and 1. Therefore postgres_fdw could not handle
the failure to send FETCH query in an asynchronous data fetch.
This commit fixes postgres_fdw so that it reports an error
when PQsendQuery() returns 0.
Back-patch to v14 where asynchronous execution was supported in postgres_fdw.
Author: Fujii Masao
Reviewed-by: Japin Li, Tom Lane
Discussion: https://postgr.es/m/b187a7cf-d4e3-5a32-4d01-8383677797f3@oss.nttdata.com
Detail and hint messages should be full sentences and should end with a
period, but some of the messages newly-introduced in v15 did not follow
that.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20220719120948.GF12702@telsasoft.com
Backpatch-through: 15
Don't consider a constant of regconfig or other reg* types to be
shippable unless it refers to a built-in object, or an object in
an extension that's been marked shippable. Without this
restriction, we're too likely to send a constant that will fail
to parse on the remote server.
For the regconfig type only, consider OIDs up to 16383 to be
"built in", rather than the normal cutoff of 9999. Otherwise
the initdb-created text search configurations will be considered
unshippable, which is unlikely to make anyone happy.
It's possible that this new restriction will de-optimize queries
that were working satisfactorily before. Users can restore any
lost performance by making sure that objects that can be expected
to exist on the remote side are in shippable extensions. However,
that's not a change that people are likely to be happy about having
to make after a minor-release update. Between that consideration
and the lack of field complaints, let's just change this in HEAD.
Noted while fixing bug #17483, although this is not precisely
the problem that that report complained about.
Discussion: https://postgr.es/m/1423433.1652722406@sss.pgh.pa.us
The motivation for this is to ensure successful transmission of the
values of constants of regconfig and other reg* types. The remote
will be reading them with search_path = 'pg_catalog', so schema
qualification is necessary when referencing objects in other schemas.
Per bug #17483 from Emmanuel Quincerot. Back-patch to all supported
versions. (There's some other stuff to do here, but it's less
back-patchable.)
Discussion: https://postgr.es/m/1423433.1652722406@sss.pgh.pa.us
This replaces all MemSet() calls with struct initialization where that
is easily and obviously possible. (For example, some cases have to
worry about padding bits, so I left those.)
(The same could be done with appropriate memset() calls, but this
patch is part of an effort to phase out MemSet(), so it doesn't touch
memset() calls.)
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/9847b13c-b785-f4e2-75c3-12ec77a3b05c@enterprisedb.com
Now some foreign data wrappers support TRUNCATE command.
So it's useful to support TRUNCATE triggers on foreign tables for
audit logging or for preventing undesired truncation.
Author: Yugo Nagata
Reviewed-by: Fujii Masao, Ian Lawrence Barwick
Discussion: https://postgr.es/m/20220630193848.5b02e0d6076b86617a915682@sraoss.co.jp
Expand the comment about the parallel_commit option to mention that the
default is false.
Also, since the comment about alteration of the keep_connections option,
which was located above the expanded comment, holds true for the
parallel_commit option, rewrite it to reflect this, and move it to after
the expanded comment.
Follow-up for commit 04e706d42.
Discussion: https://postgr.es/m/CAPmGK16Kg2Bf90sqzcZ4YM5cN_G-4h7wFUS01qQpqNB%2B2BG5_w%40mail.gmail.com
mark_async_capable_plan(), which is called from create_append_plan() to
determine whether subplans are async-capable, failed to take into
account that the given subplan created from a given subpath might
include a gating Result node if the subpath is a SubqueryScanPath or
ForeignPath, causing a segmentation fault there when the subplan created
from a SubqueryScanPath includes the Result node, or causing
ExecAsyncRequest() to throw an error about an unrecognized node type
when the subplan created from a ForeignPath includes the Result node,
because in the latter case the Result node was unintentionally
considered as async-capable, but we don't currently support executing
Result nodes asynchronously. Fix by modifying mark_async_capable_plan()
to disable asynchronous execution in such cases. Also, adjust code in
the ProjectionPath case in mark_async_capable_plan(), for consistency
with other cases, and adjust/improve comments there.
is_async_capable_path() added in commit 27e1f1456, which was rewritten
to mark_async_capable_plan() in a later commit, has the same issue,
causing the error at execution mentioned above, so back-patch to v14
where the aforesaid commit went in.
Per report from Justin Pryzby.
Etsuro Fujita, reviewed by Zhihong Yu and Justin Pryzby.
Discussion: https://postgr.es/m/20220408124338.GK24419%40telsasoft.com
Previously, we allowed this, but such triggers might query the table to
insert into and act differently if the tuples that have already been
processed and prepared for insertion are not there, so disable it in
such cases.
Back-patch to v14 where batch insert was added.
Discussion: https://postgr.es/m/CAPmGK16_uPqsmgK0-LpLSUk54_BoK13bPrhxhfjSoSTVz414hA%40mail.gmail.com
In commit 27e1f1456, create_append_plan() only allowed the subplan
created from a given subpath to be executed asynchronously when it was
an async-capable ForeignPath. To extend coverage, this patch handles
cases when the given subpath includes some other Path types as well that
can be omitted in the plan processing, such as a ProjectionPath directly
atop an async-capable ForeignPath, allowing asynchronous execution in
partitioned-scan/partitioned-join queries with non-Var tlist expressions
and more UNION queries.
Andrey Lepikhov and Etsuro Fujita, reviewed by Alexander Pyhalov and
Zhihong Yu.
Discussion: https://postgr.es/m/659c37a8-3e71-0ff2-394c-f04428c76f08%40postgrespro.ru
postgres_fdw would push ORDER BY clauses to the remote side without
verifying that the sort operator is safe to ship. Moreover, it failed
to print a suitable USING clause if the sort operator isn't default
for the sort expression's type. The net result of this is that the
remote sort might not have anywhere near the semantics we expect,
which'd be disastrous for locally-performed merge joins in particular.
We addressed similar issues in the context of ORDER BY within an
aggregate function call in commit 7012b132d, but failed to notice
that query-level ORDER BY was broken. Thus, much of the necessary
logic already existed, but it requires refactoring to be usable
in both cases.
Back-patch to all supported branches. In HEAD only, remove the
core code's copy of find_em_expr_for_rel, which is no longer used
and really should never have been pushed into equivclass.c in the
first place.
Ronan Dunklau, per report from David Rowley;
reviews by David Rowley, Ranier Vilela, and myself
Discussion: https://postgr.es/m/CAApHDvr4OeC2DBVY--zVP83-K=bYrTD7F8SZDhN4g+pj2f2S-A@mail.gmail.com
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
Commit 85c696112 introduced this function to deduplicate code in the
transaction callback functions, but the SQL command passed as an
argument to it was useless when it returned before aborting a remote
transaction using the command. Modify pgfdw_abort_cleanup() so that it
constructs the command when/if necessary, as before, removing the
argument from it. Also update comments in pgfdw_abort_cleanup() and one
of the calling functions.
Etsuro Fujita, reviewed by David Zhang.
Discussion: https://postgr.es/m/CAPmGK158hrd%3DZfXmgkmNFHivgh18e4oE2Gz151C2Q4OBDjZ08A%40mail.gmail.com
9e98583 introduced a helper to centralize building their needed state
(tuplestore, tuple descriptors, etc.), checking for any errors. This
commit updates all places of contrib/ that can be switched to use
SetSingleFuncCall() as a drop-in replacement, resulting in the removal
of a lot of boilerplate code in all the modules updated by this commit.
Per analysis, some places remain as they are:
- pg_logdir_ls() in adminpack/ uses historically TYPEFUNC_RECORD as
return type, and I suspect that changing it may cause issues at run-time
with some of its past versions, down to 1.0.
- dblink/ uses a wrapper function doing exactly the work of
SetSingleFuncCall(). Here the switch should be possible, but rather
invasive so it does not seem the extra backpatch maintenance cost.
- tablefunc/, similarly, uses multiple helper functions with portions of
SetSingleFuncCall() spread across the code paths of this module.
Author: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_bvDPJoL9mH6eYwvBpPtTGQwbDzfJbCM-OjkSZDu5yTPg@mail.gmail.com
postgres_fdw commits remote (sub)transactions opened on remote server(s)
in a local (sub)transaction one by one when the local (sub)transaction
commits. This patch allows it to commit the remote (sub)transactions in
parallel to improve performance. This is enabled by the server option
"parallel_commit". The default is false.
Etsuro Fujita, reviewed by Fujii Masao and David Zhang.
Discussion: http://postgr.es/m/CAPmGK17dAZCXvwnfpr1eTfknTGdt%3DhYTV9405Gt5SqPOX8K84w%40mail.gmail.com
Commit 75d22069e tried to throw a warning for setting a custom GUC whose
prefix belongs to a previously-loaded extension, if there is no such GUC
defined by the extension. But that caused unstable behavior with
parallel workers, because workers don't necessarily load extensions and
GUCs in the same order their leader did. To make that work safely, we
have to completely disallow the case. We now actually remove any such
GUCs at the time of initial extension load, and then throw an error not
just a warning if you try to add one later. While this might create a
compatibility issue for a few people, the improvement in error-detection
capability seems worth it; it's hard to believe that there's any good
use-case for choosing such GUC names.
This also un-reverts 5609cc01c (Rename EmitWarningsOnPlaceholders() to
MarkGUCPrefixReserved()), since that function's old name is now even
more of a misnomer.
Florin Irion and Tom Lane
Discussion: https://postgr.es/m/1902182.1640711215@sss.pgh.pa.us
Commit 6e0cb3dec1 allowed postgres_fdw.application_name to include
escape sequences %a (application name), %d (database name), %u (user name)
and %p (pid). In addition to them, this commit makes it support
the escape sequences for session ID (%c) and cluster name (%C).
These are helpful to investigate where each remote transactions came from.
Author: Fujii Masao
Reviewed-by: Ryohei Takahashi, Kyotaro Horiguchi
Discussion: https://postgr.es/m/1041dc9a-c976-049f-9f14-e7d94c29c4b2@oss.nttdata.com
This routine is a no-op since dd04e95 from 2003, with a macro kept
around for compatibility purposes. This has led to the same code
patterns being copy-pasted around for no effect, sometimes in confusing
ways like in pg_logical_slot_get_changes_guts() from logical.c where the
code was actually incorrect.
This issue has been discussed on two different threads recently, so
rather than living with this legacy, remove any uses of this routine in
the C code to simplify things. The compatibility macro is kept to avoid
breaking any out-of-core modules that depend on it.
Reported-by: Tatsuhito Kasahara, Justin Pryzby
Author: Tatsuhito Kasahara
Discussion: https://postgr.es/m/20211217200419.GQ17618@telsasoft.com
Discussion: https://postgr.es/m/CAP0=ZVJeeYfAeRfmzqAF2Lumdiv4S4FewyBnZd4DPTrsSQKJKw@mail.gmail.com
Commit 27e1f1456 failed to process a pending asynchronous request made
for a given ForeignScan node in postgresReScanForeignScan() (if any) in
cases where we would only reset the next_tuple counter in that function,
contradicting the assumption that there should be no pending
asynchronous requests that have been made for async-capable subplans for
the parent Append node after ReScan. This led to an assert failure in
an assert-enabled build. I think this would also lead to mis-rewinding
the cursor in that function in the case where we have already fetched
one batch for the ForeignScan node and the asynchronous request has been
made for the second batch, because even in that case we would just reset
the counter when called from that function, so we would fail to execute
MOVE BACKWARD ALL.
To fix, modify that function to process the asynchronous request before
restarting the scan.
While at it, add a comment to a function to match other places.
Per bug #17344 from Alexander Lakhin. Back-patch to v14 where the
aforesaid commit came in.
Patch by me. Test case by Alexander Lakhin, adjusted by me. Reviewed
and tested by Alexander Lakhin and Dmitry Dolgov.
Discussion: https://postgr.es/m/17344-226b78b00de73a7e@postgresql.org
Commit 27e1f1456 resets the per-connection states of connections used to
scan foreign tables asynchronously during abort cleanup at main
transaction end, but it failed to do so during subabort cleanup at
subtransaction end, leading to a segmentation fault when re-executing an
asynchronous-foreign-table-scan query in a transaction that was
cancelled in a subtransaction of it.
Fix by modifying pgfdw_abort_cleanup() to reset the per-connection state
of a given connection also when called for subabort cleanup. Also,
modify that function to do the reset in both the abort-cleanup and
subabort-cleanup cases if necessary, to save cycles, and improve a
comment on it a little bit.
Back-patch to v14 where the aforesaid commit came in.
Reviewed by Alexander Pyhalov
Discussion: https://postgr.es/m/CAPmGK14cCV-JA7kNsyt2EUTKvZ4xkr2LNRthi1U1C3cqfGppAw@mail.gmail.com
Before, SQL-level boolean constants were represented by a string with
a cast, and internal Boolean values in DDL commands were usually
represented by Integer nodes. This takes the place of both of these
uses, making the intent clearer and having some amount of type safety.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8c1a2e37-c68d-703c-5a83-7a6077f4f997@enterprisedb.com
Commit 449ab63505 added postgres_fdw.application_name GUC that specifies
a value for application_name configuration parameter used when postgres_fdw
establishes a connection to a foreign server. Also commit 6e0cb3dec1
allowed it to include escape sequences. Both commits added the regression
tests for the GUC, but those tests were reverted by commits 98dbef90eb and
5e64ad3697 because they were unstable and caused some buildfarm members
to report the failure.
This is the third try to add the regression test for
postgres_fdw.application_name GUC.
One of issues to make the test unstable was to have used
postgres_fdw_disconnect_all() to close the existing remote connections.
The test expected that the remote connection and its corresponding backend
at the remote server disappeared just after postgres_fdw_disconnect_all()
was executed, but it could take a bit time for them to disappear.
To make sure that they exit, this commit makes the test use
pg_terminate_backend() with the timeout at the remote server, instead.
If the timeout is set to greater than zero, this function waits until
they are actually terminated (or until the given time has passed).
Another issue was that the test didn't take into consideration the case
where postgres_fdw.application_name containing some escape sequences was
converted to the string larger than NAMEDATALEN. In this case it was
truncated to less than NAMEDATALEN when it's passed to the remote server,
but the test expected wrongly that full string of application_name was
always viewable. This commit changes the test so that it can handle that case.
Author: Fujii Masao
Reviewed-by: Masahiko Sawada, Hayato Kuroda, Kyotaro Horiguchi
Discussion: https://postgr.es/m/3220909.1631054766@sss.pgh.pa.us
Discussion: https://postgr.es/m/20211224.180006.2247635208768233073.horikyota.ntt@gmail.com
Discussion: https://postgr.es/m/e7b61420-a97b-8246-77c4-a0d48fba5a45@oss.nttdata.com
This seems like a clearer name for what it does now.
Provide a compatibility macro so that extensions don't have to convert
to the new name right away.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
Commit 6e0cb3dec1 added the tests that check that escape sequences in
postgres_fdw.application_name setting are replaced with status information
expectedly. But they were unstable and caused some buildfarm
members to report the failure. This commit reverts those unstable tests.
application_name that used when postgres_fdw establishes a connection to
a foreign server can be specified in either or both a connection parameter
of a server object and GUC postgres_fdw.application_name. This commit
allows those parameters to include escape sequences that begins with
% character. Then postgres_fdw replaces those escape sequences with
status information. For example, %d and %u are replaced with user name
and database name in local server, respectively. This feature enables us
to add information more easily to track remote transactions or queries,
into application_name of a remote connection.
Author: Hayato Kuroda
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Hou Zhijie, Fujii Masao
Discussion: https://postgr.es/m/TYAPR01MB5866FAE71C66547C64616584F5EB9@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
One code path related to this flavor of ALTER TABLE was checking that
the relation to detach has to be a normal table or a partitioned table,
which would fail if using the command with a different relation kind.
Views, sequences and materialized views cannot be part of a partition
tree, so these would cause the command to fail anyway, but the assertion
was triggered. Foreign tables can be part of a partition tree, and
again the assertion would have failed. The simplest solution is just to
remove this assertion, so as we get the same failure as the
non-concurrent code path.
While on it, add a regression test in postgres_fdw for the concurrent
partition detach of a foreign table, as per a suggestion from Alexander
Lakhin.
Issue introduced in 71f4c8c.
Reported-by: Alexander Lakhin
Author: Michael Paquier, Alexander Lakhin
Reviewed-by: Peter Eisentraut, Kyotaro Horiguchi
Discussion: https://postgr.es/m/17339-a9e09aaf38a3457a@postgresql.org
Backpatch-through: 14
Extensions that define any custom GUCs should call
EmitWarningsOnPlaceholders after doing so, to help catch misspellings.
Many of our contrib modules hadn't gotten the memo on that, though.
Also add such calls to src/test/modules extensions that have GUCs.
While these aren't really user-facing, they should illustrate good
practice not faulty practice.
Shinya Kato
Discussion: https://postgr.es/m/524fa2c0a34f34b68fbfa90d0760d515@oss.nttdata.com
When aborting remote transaction or sending cancel request to a remote server,
postgres_fdw calls pgfdw_get_cleanup_result() to wait for the result of
transaction abort query or cancel request to arrive. It fails to get the result
if the timeout expires or a connection trouble happens.
Previously postgres_fdw reported no warning message even when the timeout
expired or a connection trouble happened in pgfdw_get_cleanup_result().
This could make the troubleshooting harder when such an event occurred.
This commit makes pgfdw_get_cleanup_result() tell its caller what trouble
(timeout or connection error) occurred, on failure, and also makes its caller
report the proper warning message based on that information.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/15aa988c-722e-ad3e-c936-4420c5b2bfea@oss.nttdata.com
pgfdw_report_error() in postgres_fdw gets a message from PGresult or
PGconn to report an error received from a remote server. Previously
if it could get a message from neither of them, it reported empty
message unexpectedly. The cause of this issue was that pgfdw_report_error()
didn't handle properly the case where no message could be obtained
and its local variable message_primary was set to '\0'.
This commit improves pgfdw_report_error() so that it reports the message
"could not obtain ..." when it gets no message and message_primary
is set to '\0'. This is the same behavior as when message_primary is NULL.
dblink_res_error() in dblink has the same issue, so this commit also
improves it in the same way.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/477c16c8-7ea4-20fc-38d5-ed3a77ed616c@oss.nttdata.com
fsstate in process_pending_requests (in postgres_fdw.c) was added in
8998e3cafa as an assertion-only variable, 1ec7fca859 stated using
the variable outside of assertions.
rd_index in get_index_column_opclass (in lsyscache.c) was introduced
in 2a6368343f, and then promptly used in the fix commit 7e04160390
shortly thereafter.
This removes the PG_USED_FOR_ASSERTS_ONLY variable decoration from
the above mentioned variables.
Reviewed-by: Greg Nancarrow <gregn4422@gmail.com>
Discussion: https://postgr.es/m/F959106C-0F21-43A5-B2AE-D007D51ACBEE@yesql.se
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
Memoize would always use the hash equality operator for the cache key
types to determine if the current set of parameters were the same as some
previously cached set. Certain types such as floating points where -0.0
and +0.0 differ in their binary representation but are classed as equal by
the hash equality operator may cause problems as unless the join uses the
same operator it's possible that whichever join operator is being used
would be able to distinguish the two values. In which case we may
accidentally return in the incorrect rows out of the cache.
To fix this here we add a binary mode to Memoize to allow it to the
current set of parameters to previously cached values by comparing
bit-by-bit rather than logically using the hash equality operator. This
binary mode is always used for LATERAL joins and it's used for normal
joins when any of the join operators are not hashable.
Reported-by: Tom Lane
Author: David Rowley
Discussion: https://postgr.es/m/3004308.1632952496@sss.pgh.pa.us
Backpatch-through: 14, where Memoize was added
Commit 81d5995b4b introduced more fine-grained errormessages for
incorrect relkinds for publication, while unlogged and temporary
tables were reported with using the same message. This provides
separate error messages for these types of relpersistence.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Jeevan Ladhe <jeevan.ladhe@enterprisedb.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CALj2ACW9S=AswyQHjtO6WMcsergMkCBTtzXGrM8DX26DzfeTLQ@mail.gmail.com
When deparsing an expression of the form "remote_var OP constant",
we'd normally apply a cast to the constant to make sure that the
remote parser thinks it's of the same type we do. However, doing
so is often not necessary, and it causes problems if the user has
intentionally declared the local column as being of a different
type than the remote column. A plausible use-case for that is
using text to represent a type that's an enum on the remote side.
A comparison on such a column will get shipped as "var = 'foo'::text",
which blows up on the remote side because there's no enum = text
operator. But if we simply leave off the explicit cast, the
comparison will do exactly what the user wants.
It's possible to do this without major risk of semantic problems, by
relying on the longstanding parser heuristic that "if one operand of
an operator is of type unknown, while the other one has a known type,
assume that the unknown operand is also of that type". Hence, this
patch leaves off the cast only if (a) the operator inputs have the same
type locally; (b) the constant will print as a string literal or NULL,
both of which are initially taken as type unknown; and (c) the non-Const
input is a plain foreign Var. Rule (c) guarantees that the remote
parser will know the type of the non-Const input; moreover, it means
that if this cast-omission does cause any semantic surprises, that can
only happen in cases where the local column has a different type than
the remote column. That wasn't guaranteed to work anyway, and this
patch should represent a net usability gain for such cases.
One point that I (tgl) remain slightly uncomfortable with is that we
will ignore an implicit RelabelType when deciding if the non-Const input
is a plain Var. That makes it a little squishy to argue that the remote
should resolve the Const as being of the same type as its Var, because
then our Const is not the same type as our Var. However, if we don't do
that, then this hack won't work as desired if the user chooses to use
varchar rather than text to represent some remote column. That seems
useful, so do it like this for now. We might have to give up the
RelabelType-ignoring bit if any problems surface.
Dian Fay, with review and kibitzing by me
Discussion: https://postgr.es/m/C9LU294V7K4F.34LRRDU449O45@lamia
The foreign data wrapper's validator function provides a HINT message with
list of valid options for the object specified in CREATE or ALTER command,
when the option given in the command is invalid. Previously
postgresql_fdw_validator() and the validator functions for postgres_fdw and
dblink_fdw worked in that way even there were no valid options in the object,
which could lead to the HINT message with empty list (because there were
no valid options). For example, ALTER FOREIGN DATA WRAPPER postgres_fdw
OPTIONS (format 'csv') reported the following ERROR and HINT messages.
This behavior was confusing.
ERROR: invalid option "format"
HINT: Valid options in this context are:
There is no such issue in file_fdw. The validator function for file_fdw
reports the HINT message "There are no valid options in this context."
instead in that case.
This commit improves postgresql_fdw_validator() and the validator functions
for postgres_fdw and dblink_fdw so that they do likewise. For example,
this change causes the above ALTER FOREIGN DATA WRAPPER command to
report the following messages.
ERROR: invalid option "nonexistent"
HINT: There are no valid options in this context.
Author: Kosei Masumura
Reviewed-by: Bharath Rupireddy, Fujii Masao
Discussion: https://postgr.es/m/557d06cebe19081bfcc83ee2affc98d3@oss.nttdata.com
Commit c7b7311f6 adjusted conversion_error_callback to always use
information from the query's rangetable, to avoid doing catalog lookups
in an already-failed transaction. However, as a result of the utterly
inadequate documentation for make_tuple_from_result_row, I failed to
realize that fsstate could be NULL in some contexts. That led to a
crash if we got a conversion error in such a context. Fix by falling
back to the previous coding when fsstate is NULL. Improve the
commentary, too.
Per report from Andrey Borodin. Back-patch to 9.6, like the previous
patch.
Discussion: https://postgr.es/m/08916396-55E4-4D68-AB3A-BD6066F9E5C0@yandex-team.ru
In postgres_fdw, pgfdw_xact_callback() and pgfdw_subxact_callback()
callback functions do almost the same thing to rollback remote toplevel-
and sub-transaction. But previously their such rollback logics were
implemented separately in each function and in different way. Which
could decrease the readability and maintainability of the code.
To fix the issue, this commit creates the common function to rollback
remote transactions, and makes those callback functions use it. Which
allows us to avoid unnecessary code duplication.
Author: Fujii Masao
Reviewed-by: Zhihong Yu, Bharath Rupireddy
Discussion: https://postgr.es/m/62fbb63a-d46c-fb47-a56d-f6be1909aa44@oss.nttdata.com
This switches the default ACL to what the documentation has recommended
since CVE-2018-1058. Upgrades will carry forward any old ownership and
ACL. Sites that declined the 2018 recommendation should take a fresh
look. Recipes for commissioning a new database cluster from scratch may
need to create a schema, grant more privileges, etc. Out-of-tree test
suites may require such updates.
Reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/20201031163518.GB4039133@rfd.leadboat.com
The Value node struct is a weird construct. It is its own node type,
but most of the time, it actually has a node type of Integer, Float,
String, or BitString. As a consequence, the struct name and the node
type don't match most of the time, and so it has to be treated
specially a lot. There doesn't seem to be any value in the special
construct. There is very little code that wants to accept all Value
variants but nothing else (and even if it did, this doesn't provide
any convenient way to check it), and most code wants either just one
particular node type (usually String), or it accepts a broader set of
node types besides just Value.
This change removes the Value struct and node type and replaces them
by separate Integer, Float, String, and BitString node types that are
proper node types and structs of their own and behave mostly like
normal node types.
Also, this removes the T_Null node tag, which was previously also a
possible variant of Value but wasn't actually used outside of the
Value contained in A_Const. Replace that by an isnull field in
A_Const.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5ba6bc5b-3f95-04f2-2419-f8ddb4c046fb@enterprisedb.com
David Rowley