This is advantageous because the BG writer is alive until much later in
the shutdown sequence than WAL writer; we want to make sure that it's
possible to shut off synchronous replication during a smart shutdown,
else it might not be possible to complete the shutdown at all.
Per very reasonable gripes from Fujii Masao and Simon Riggs.
The maximum value of deadlock_timeout, max_standby_archive_delay,
max_standby_streaming_delay, log_min_duration_statement, and
log_autovacuum_min_duration was INT_MAX/1000 milliseconds, which is
about 35min, which is too short for some practical uses. Raise the
maximum value to INT_MAX; the code that uses the parameters already
supports that just fine.
1. Don't ignore query cancel interrupts. Instead, if the user asks to
cancel the query after we've already committed it, but before it's on
the standby, just emit a warning and let the COMMIT finish.
2. Don't ignore die interrupts (pg_terminate_backend or fast shutdown).
Instead, emit a warning message and close the connection without
acknowledging the commit. Other backends will still see the effect of
the commit, but there's no getting around that; it's too late to abort
at this point, and ignoring die interrupts altogether doesn't seem like
a good idea.
3. If synchronous_standby_names becomes empty, wake up all backends
waiting for synchronous replication to complete. Without this, someone
attempting to shut synchronous replication off could easily wedge the
entire system instead.
4. Avoid depending on the assumption that if a walsender updates
MyProc->syncRepState, we'll see the change even if we read it without
holding the lock. The window for this appears to be quite narrow (and
probably doesn't exist at all on machines with strong memory ordering)
but protecting against it is practically free, so do that.
5. Remove useless state SYNC_REP_MUST_DISCONNECT, which isn't needed and
doesn't actually do anything.
There's still some further work needed here to make the behavior of fast
shutdown plausible, but that looks complex, so I'm leaving it for a
separate commit. Review by Fujii Masao.
This patch causes unknown-type Consts to be coerced to the resolved output
type of the set operation at parse time. Formerly such Consts were left
alone until late in the planning stage. The disadvantage of that approach
is that it disables some optimizations, because the planner sees the set-op
leaf query as having different output column types than the overall set-op.
We saw an example of that in a recent performance gripe from Claudio
Freire.
Fixing such a Const requires scribbling on the leaf query in
transformSetOperationTree, but that should be all right since if the leaf
query's semantics depended on that output column, it would already have
resolved the unknown to something else.
Most of the bulk of this patch is a simple adjustment of
transformSetOperationTree's API so that upper levels can get at the
TargetEntry containing a Const to be replaced: it now returns a list of
TargetEntries, instead of just the bare expressions.
While this will give wrong answers when estimating selectivity for a
comparison operator that's using a non-default collation, the estimation
error probably won't be large; and anyway the former approach created
estimation errors of its own by trying to use a histogram that might have
been computed with some other collation. So we'll adopt this simplified
approach for now and perhaps improve it sometime in the future.
This patch incorporates changes from Andres Freund to make sure that
selfuncs.c passes a valid collation OID to any datatype-specific function
it calls, in case that function wants collation information. Said OID will
now always be DEFAULT_COLLATION_OID, but at least we won't get errors.
Add dummy returns before every potential division-by-zero in int8.c,
because apparently further "improvements" in gcc's optimizer have
enabled it to break functions that weren't broken before.
Aurelien Jarno, via Martin Pitt
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
Use collencoding = -1 to represent such a collation in pg_collation.
We need this to make the "default" entry work sanely, and a later
patch will fix the C/POSIX entries to be represented this way instead
of duplicating them across all encodings. All lookup operations now
search first for an entry that's database-encoding-specific, and then
for the same name with collencoding = -1.
Also some incidental code cleanup in collationcmds.c and pg_collation.c.
Including collation in the behavior of that function promotes a world view
we do not want. Moreover, it was producing the wrong behavior for pg_dump
anyway: what we want is to dump a COLLATE clause on attributes whose
attcollation is different from the underlying type, and likewise for
domains, and the function cannot do that for us. Doing it the hard way
in pg_dump is a bit more tedious but produces more correct output.
In passing, fix initdb so that the initial entry in pg_collation is
properly pinned. It was droppable before :-(
It's not a good idea to kill the postmaster just because someone muffs
this, and it's not consistent with what we do for other, similar GUCs.
Fujii Masao, with a bit more hacking by me
SyncRepRequested() must check not only the value of the
synchronous_replication GUC but also whether max_wal_senders > 0.
Otherwise, we might end up waiting for sync rep even when there's no
possibility of a standby ever managing to connect. There are some
existing cross-checks to prevent this, but they're not quite sufficient:
the user can start the server with max_wal_senders=0,
synchronous_standby_names='', and synchronous_replication=off and then
subsequent make synchronous_standby_names not empty using pg_ctl reload,
and then SET synchronous_standby=on, leading to an indefinite hang.
Along the way, rename the global variable for the synchronous_replication
GUC to match the name of the GUC itself, for clarity.
Report by Fujii Masao, though I didn't use his patch.
At least two recent commits have apparently imagined that a comment in
a Makefile stating that something would be included in the distribution
tarball was sufficient to make it so. They hadn't bothered to hook
into the upper maintainer-clean targets either. Per bug #5923 from
Charles Johnson, in which it emerged that the 9.1alpha4 tarballs are
short a few files that should be there.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
Formerly, any member of a role could change the role's comment, as of
course could superusers; but holders of CREATEROLE privilege could not,
unless they were also members. This led to the odd situation that a
CREATEROLE holder could create a role but then could not comment on it.
It also seems a bit dubious to let an unprivileged user change his own
comment, let alone those of group roles he belongs to. So, change the
rule to be "you must be superuser to comment on a superuser role, or
hold CREATEROLE to comment on non-superuser roles". This is the same
as the privilege check for creating/dropping roles, and thus fits much
better with the rule for other object types, namely that only the owner
of an object can comment on it.
In passing, clean up the documentation for COMMENT a little bit.
Per complaint from Owen Jacobson and subsequent discussion.
We really need an automated check for this ... and did VALIDATE really
need to become a keyword at all, rather than picking some other syntax
using existing keywords?
race condition where SummarizeOldestCommittedSxact() is called even though
another backend already cleared out all finished sxact entries. That's OK,
RegisterSerializableTransactionInt() can just retry getting a news xact
slot from the available-list when that happens.
Reported by YAMAMOTO Takashi, bug #5918.
contains newly-inserted tuples that according to our OldestXmin are not
yet visible to everyone. The value returned by GetOldestXmin() is conservative,
and it can move backwards on repeated calls, so if we see that contradiction
between the PD_ALL_VISIBLE flag and status of tuples on the page, we have to
assume it's because an earlier vacuum calculated a higher OldestXmin value,
and all the tuples really are visible to everyone.
We have received several reports of this bug, with the "PD_ALL_VISIBLE flag
was incorrectly set in relation ..." warning appearing in logs. We were
finally able to hunt it down with David Gould's help to run extra diagnostics
in an environment where this happened frequently.
Also reword the warning, per Robert Haas' suggestion, to not imply that the
PD_ALL_VISIBLE flag is necessarily at fault, as it might also be a symptom
of corruption on a tuple header.
Backpatch to 8.4, where the PD_ALL_VISIBLE flag was introduced.
than doing it aggressively whenever the tail-XID pointer is advanced, because
this way we don't need to do it while holding SerializableXactHashLock.
This also fixes bug #5915 spotted by YAMAMOTO Takashi, and removes an
obsolete comment spotted by Kevin Grittner.
periodically rescan the archive for new timelines, while waiting for new WAL
segments to arrive. This allows you to set up a standby server that follows
the TLI change if another standby server is promoted to master. Before this,
you had to restart the standby server to make it notice the new timeline.
This patch only scans the archive for TLI changes, it won't follow a TLI
change in streaming replication. That is much needed too, but it would be a
much bigger patch than I dare to sneak in this late in the release cycle.
There was discussion on improving the sanity checking of the WAL segments so
that the system would notice more reliably if the new timeline isn't an
ancestor of the current one, but that is not included in this patch.
Reviewed by Fujii Masao.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
Since this field is after a variable-length field, it can't simply be
accessed via the C struct for pg_index. Fortunately, the relcache already
did the dirty work of pulling the information out to where it can be
accessed easily, so this is a one-line fix.
Andres Freund
This mostly just involves creating control, install, and
update-from-unpackaged scripts for them. However, I had to adjust plperl
and plpython to not share the same support functions between variants,
because we can't put the same function into multiple extensions.
catversion bump forced due to new contents of pg_pltemplate, and because
initdb now installs plpgsql as an extension not a bare language.
Add support for regression testing these as extensions not bare
languages.
Fix a couple of other issues that popped up while testing this: my initial
hack at pg_dump binary-upgrade support didn't work right, and we don't want
an extra schema permissions test after all.
Documentation changes still to come, but I'm committing now to see
whether the MSVC build scripts need work (likely they do).
It is possible that an expression ends up with a collatable type but
without a collation. CREATE TABLE AS could then create a table based
on that. But such a column cannot be dumped with valid SQL syntax, so
we disallow creating such a column.
per test report from Noah Misch
Remove the unconditional superuser permissions check in CREATE EXTENSION,
and instead define a "superuser" extension property, which when false
(not the default) skips the superuser permissions check. In this case
the calling user only needs enough permissions to execute the commands
in the extension's installation script. The superuser property is also
enforced in the same way for ALTER EXTENSION UPDATE cases.
In other ALTER EXTENSION cases and DROP EXTENSION, test ownership of
the extension rather than superuserness. ALTER EXTENSION ADD/DROP needs
to insist on ownership of the target object as well; to do that without
duplicating code, refactor comment.c's big switch for permissions checks
into a separate function in objectaddress.c.
I also removed the superuserness checks in pg_available_extensions and
related functions; there's no strong reason why everybody shouldn't
be able to see that info.
Also invent an IF NOT EXISTS variant of CREATE EXTENSION, and use that
in pg_dump, so that dumps won't fail for installed-by-default extensions.
We don't have any of those yet, but we will soon.
This is all per discussion of wrapping the standard procedural languages
into extensions. I'll make those changes in a separate commit; this is
just putting the core infrastructure in place.
Robert Haas