Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Add some more terms, clarify some definitions, remove redundant terms,
move a couple of terms to keep alphabetical order.
Co-authored-by: Jürgen Purtz <juergen@purtz.de>
Co-authored-by: Erik Rijkers <er@xs4all.nl>
Co-authored-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/7b9b469e804777ac9df4d37716db935e@xs4all.nl
I abbreviated the heck out of the column headings, and made a few
small wording changes, to get it to build warning-free. I can't
say that the result is pretty, but it's probably better than
removing this table entirely.
As of this commit, we have zero "exceed the available area" warnings
in a US-letter PDF build, and one such warning (about an 863-millipoint
overrun) in an A4 build. I expect to get rid of that one by renaming
wait events, so I'm not doing anything about it at the formatting
level.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
In one or two places it seemed reasonable to modify the example so as
to shorten its output slightly; but for the most part I just added a
&zwsp; after 67 characters, which is the most we can fit on a line
of monospace text in A4 format.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The previous design for this table didn't really work in narrow views,
such as PDF output; besides which its reliance on large morerows
values made it a pain to maintain (cf ab3e4fbd5, for example).
I experimented with a couple of ways to fix it, but the best and
simplest is to split it up into a separate table for each event
type category.
I also rearranged the event ordering to be strictly alphabetical,
as nobody would ever be able to find entries otherwise.
There is work afoot to revise the set of event names described
in this table, but this commit just changes the layout, not the
contents.
In passing, add a missing entry to pg_locks.locktype,
and cross-reference that to the related wait event list.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
This changes our catalog and view descriptions to use a style inspired
by the new format for function/operator tables: each table entry is
formatted roughly like a <varlistentry>, with the column name and type
on the first line and then an indented description. This provides much
more room for expansive descriptions than we had before, and thereby
eliminates a passel of PDF build warnings.
Discussion: https://postgr.es/m/12984.1588643549@sss.pgh.pa.us
I can't see any way to make this table fit in PDF column width
without either a fundamental redesign or abbreviating EXCLUSIVE.
So I did the latter.
It'd be nicer if the abbreviating didn't leak into the HTML output
as well; but the hackery required to make the output different
seems like more trouble than it's really worth.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
Even after the tweaking I did in commit 5545b69ae, some of the
longer keywords mentioned in the SQL standard don't fit the
available space in PDF output.
I experimented with various solutions like putting such keywords
on their own table lines, but everything looked ugly or confusing
or both; worse, the weirdness also appeared in the HTML version,
which (normally) doesn't need it.
The best answer seems to be to insert &zwsp; into long keywords
so that they can be broken into two lines when, and only when,
needed. It doesn't look too awful if the break happens after
an underscore --- and fortunately, all the problematic keywords
have underscores.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
Use xreflabel attributes instead of endterm attributes to control the
appearance of links to subsections of SQL command reference pages.
This is simpler, it matches what we do elsewhere (e.g. for GUC variables),
and it doesn't draw "Unresolved ID reference" warnings from the PDF
toolchain.
Fix some places where the text was absolutely dependent on an <xref>
rendering exactly so, by using a <link> around the required text
instead. At least one of those spots had already been turned into
bad grammar by subsequent changes, and the whole idea is just too
fragile for my taste. <xref> does NOT have fixed output, don't write
as if it does.
Consistently include a page-level link in cross-man-page references,
because otherwise they are useless/nonsensical in man-page output.
Likewise, be consistent about mentioning "below" or "above" in same-page
references; we were doing that in about 90% of the cases, but now it's
100%.
Also get rid of another nonfunctional-in-PDF idea, of making
cross-references to functions by sticking ID tags on <row> constructs.
We can put the IDs on <indexterm>s instead --- which is probably not any
more sensible in abstract terms, but it works where the other doesn't.
(There is talk of attaching cross-reference IDs to most or all of
the docs' function descriptions, but for now I just fixed the two
that exist.)
Discussion: https://postgr.es/m/14480.1589154358@sss.pgh.pa.us
This patch eliminates a few more "exceed the available area" warnings
whose causes aren't particularly connected to anything else.
The only one really worthy of comment is that I increased the space
allowed for an <orderedlist>'s numbers, because the default of 1em
doesn't quite work for more than one digit. The rest are one-off
insertions of &zwsp; and suchlike tweaks, in places where they
shouldn't do any damage to the material. (In particular, although
I split some long identifiers with zwsp's, there are other nearby
occurrences of each one; so those changes shouldn't hurt greppability
of the document sources.)
I made up a very crude hack to compare the docs with reality (as
embodied in the system catalogs) ... and indeed they don't match
everywhere. Missing oid columns, wrong data types, wrong "references"
links, columns listed in the wrong order. None of this seems quite
important enough to back-patch.
This converts the contrib documentation to the new style, and mops up
a couple of function tables that were outside chapter 9 in the main
docs.
A few contrib modules choose not to present their functions in the
standard tabular format. There might be room to rethink those decisions
now that the standard format is more friendly to verbose descriptions.
But I have not undertaken to do that here; I just converted existing
tables.
In the wake of commit f21599311, we don't need to set table columns'
align specs retail. Undo a few such settings I'd added in commit
5545b69ae. (The column width adjustments stay, though.)
I concluded that we really just ought to force all tables in PDF output
to default to "left" alignment (instead of "justify"); that is what the
HTML toolchain does and that's what most people have been designing the
tables to look good with. There are few if any places where "justify"
produces better-looking output, and there are many where it looks
horrible. So change stylesheet-fo.xsl to make that true.
Also tweak column widths in a few more tables to make them look better
and avoid "exceed the available area" warnings. This commit fixes
basically everything that can be fixed through that approach. The
remaining tables that give warnings either are scheduled for redesign
as per recent discussions, or need a fundamental rethink because they
Just Don't Work in a narrow view.
Moving this setting into the main configuration file was ill-considered,
perhaps, because that typically causes it to be set before
timezone_abbreviations has been set. Which in turn means that zone
abbreviations don't work, only full zone names.
We could imagine hacking things so that such cases do work, but the
stability of the hack would be questionable, and the value isn't really
that high. Instead just document that you should use a numeric zone
offset or a full zone name.
Per bug #16404 from Reijo Suhonen.
Back-patch to v12 where this was changed.
Discussion: https://postgr.es/m/16404-4603a99603fbd04c@postgresql.org
Tom Lane