The last section of pg_createsubscriber used the terms
"publication-name", "replication-slot-name", and "subscription-name".
These terms are not defined on the page, which was confusing, and the
intention is clearly to refer to the values one would give to the
options --publication, --subscription and --replication-slot. Let's
simplify the documentation by mentioning the option switches, instead of
these terms.
Reported-by: Christophe Courtois
Author: Shubham Khanna
Reviewed-by: Vignesh C, Peter Smith
Discussion: https://postgr.es/m/173288198026.714.15127074046508836738@wrigleys.postgresql.org
Backpatch-through: 17
When using a pipeline, a transaction starts from the first command and
is committed with a Sync message or when the pipeline ends.
Functions like IsInTransactionBlock() or PreventInTransactionBlock()
were already able to understand a pipeline as being in a transaction
block, but it was not the case of CheckTransactionBlock(). This
function is called for example to generate a WARNING for SET LOCAL,
complaining that it is used outside of a transaction block.
The current state of the code caused multiple problems, like:
- SET LOCAL executed at any stage of a pipeline issued a WARNING, even
if the command was at least second in line where the pipeline is in a
transaction state.
- LOCK TABLE failed when invoked at any step of a pipeline, even if it
should be able to work within a transaction block.
The pipeline protocol assumes that the first command of a pipeline is
not part of a transaction block, and that any follow-up commands is
considered as within a transaction block.
This commit changes the backend so as an implicit transaction block is
started each time the first Execute message of a pipeline has finished
processing, with this implicit transaction block ended once a sync is
processed. The checks based on XACT_FLAGS_PIPELINING in the routines
checking if we are in a transaction block are not necessary: it is
enough to rely on the existing ones.
Some tests are added to pgbench, that can be backpatched down to v17
when \syncpipeline is involved and down to v14 where \startpipeline and
\endpipeline are available. This is unfortunately limited regarding the
error patterns that can be checked, but it provides coverage for various
pipeline combinations to check if these succeed or fail. These tests
are able to capture the case of SET LOCAL's WARNING. The author has
proposed a different feature to improve the coverage by adding similar
meta-commands to psql where error messages could be checked, something
more useful for the cases where commands cannot be used in transaction
blocks, like REINDEX CONCURRENTLY or VACUUM. This is considered as
future work for v18~.
Author: Anthonin Bonnefoy
Reviewed-by: Jelte Fennema-Nio, Michael Paquier
Discussion: https://postgr.es/m/CAO6_XqrWO8uNBQrSu5r6jh+vTGi5Oiyk4y8yXDORdE2jbzw8xw@mail.gmail.com
Backpatch-through: 13
Per PEP 3114, iterator.next() has been renamed to iterator.__next__(),
and one example in the documentation still used next(). This caused the
example provided to fail the function creation since Python 2 is not
supported anymore since 19252e8ec9.
Author: Erik Wienhold
Discussion: https://postgr.es/m/173209043143.2092749.13692266486972491694@wrigleys.postgresql.org
Backpatch-through: 15
Many process environment variables (e.g. PATH), bypass the containment
expected of a trusted PL. Hence, trusted PLs must not offer features
that achieve setenv(). Otherwise, an attacker having USAGE privilege on
the language often can achieve arbitrary code execution, even if the
attacker lacks a database server operating system user.
To fix PL/Perl, replace trusted PL/Perl %ENV with a tied hash that just
replaces each modification attempt with a warning. Sites that reach
these warnings should evaluate the application-specific implications of
proceeding without the environment modification:
Can the application reasonably proceed without the modification?
If no, switch to plperlu or another approach.
If yes, the application should change the code to stop attempting
environment modifications. If that's too difficult, add "untie
%main::ENV" in any code executed before the warning. For example,
one might add it to the start of the affected function or even to
the plperl.on_plperl_init setting.
In passing, link to Perl's guidance about the Perl features behind the
security posture of PL/Perl.
Back-patch to v12 (all supported versions).
Andrew Dunstan and Noah Misch
Security: CVE-2024-10979
This commit changes libpq so that errors reported by the backend during
the protocol negotiation for SSL and GSS are discarded by the client, as
these may include bytes that could be consumed by the client and write
arbitrary bytes to a client's terminal.
A failure with the SSL negotiation now leads to an error immediately
reported, without a retry on any other methods allowed, like a fallback
to a plaintext connection.
A failure with GSS discards the error message received, and we allow a
fallback as it may be possible that the error is caused by a connection
attempt with a pre-11 server, GSS encryption having been introduced in
v12. This was a problem only with v17 and newer versions; older
versions discard the error message already in this case, assuming a
failure caused by a lack of support for GSS encryption.
Author: Jacob Champion
Reviewed-by: Peter Eisentraut, Heikki Linnakangas, Michael Paquier
Security: CVE-2024-10977
Backpatch-through: 12
(We lack a query for identifying broken foreign keys in the first
changelog item, but the rest of this is in reviewable shape.)
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first.
Also as usual for a .1 release, there are some entries here that
are not really relevant for v17 because they already appeared in 17.0.
Those'll be removed later.
The previous wording is easy to read incorrectly; this change makes it
simpler, less ambiguous, and less prominent.
Backpatch to all live branches.
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/202411051201.zody6mld7vkw@alvherre.pgsql
Sloppy refactoring in commit cca97ce6a caused these programs
to pass dbname = NULL to libpq if there was no "--dbname" switch
on the command line, where before "replication" would be passed.
This didn't break things completely, because the source server doesn't
care about the dbname specified for a physical replication connection.
However, it did cause libpq to fail to match a ~/.pgpass entry that
has "replication" in the dbname field. Restore the previous behavior
of passing "replication".
Also, closer inspection shows that if you do specify a dbname
in the connection string, that is what will be matched to ~/.pgpass,
not "replication". This was the pre-existing behavior so we should
not change it, but the SGML docs were pretty misleading about it.
Improve that.
Per bug #18685 from Toshi Harada. Back-patch to v17 where the
error crept in.
Discussion: https://postgr.es/m/18685-fee2dd142b9688f1@postgresql.org
Discussion: https://postgr.es/m/2702546.1730740456@sss.pgh.pa.us
There are two functions that can be used in event triggers to get more
details about a rewrite happening on a relation. Both had a limited
documentation:
- pg_event_trigger_table_rewrite_reason() and
pg_event_trigger_table_rewrite_oid() were not mentioned in the main
event trigger section in the paragraph dedicated to the event
table_rewrite.
- pg_event_trigger_table_rewrite_reason() returns an integer which is a
bitmap of the reasons why a rewrite happens. There was no explanation
about the meaning of these values, forcing the reader to look at the
code to find out that these are defined in event_trigger.h.
While on it, let's add a comment in event_trigger.h where the
AT_REWRITE_* are defined, telling to update the documentation when
these values are changed.
Backpatch down to 13 as a consequence of 1ad23335f3, where this area
of the documentation has been heavily reworked.
Author: Greg Sabino Mullane
Discussion: https://postgr.es/m/CAKAnmmL+Z6j-C8dAx1tVrnBmZJu+BSoc68WSg3sR+CVNjBCqbw@mail.gmail.com
Backpatch-through: 13
Disabling enable_indexscan has always also disabled Index Only Scans.
Here we make that more clear in the documentation in an attempt to
prevent future complaints complaining about this expected behavior.
Reported-by: Melanie Plageman
Author: David G. Johnston, David Rowley
Backpatch-through: 12, oldest supported version
Discussion: https://postgr.es/m/CAAKRu_atV=kovgpaLREyG68PB5+ncKvJ2UNoeRetEgyC3Yb5Sw@mail.gmail.com
The present wording about viewing shared_memory_size_in_huge_pages
seems to suggest that the parameter cannot be viewed after startup
at all, whereas the intent is to make it clear that you can't use
"postgres -C" to view this parameter while the server is running.
This commit rephrases this section to remove the ambiguity.
Author: Seino Yuki
Reviewed-by: Michael Paquier, David G. Johnston, Fujii Masao
Discussion: https://postgr.es/m/420584fd274f9ec4f337da55ffb3b790%40oss.nttdata.com
Backpatch-through: 15
The fork name is always separated with the block number by an underscore
in the names of the files generated, but the docs stuck them together
without a separator, which was confusing.
Author: Christoph Berg
Discussion: https://postgr.es/m/ZvxtSLiix9eceMRM@msg.df7cb.de
Backpatch-through: 16
There were unnecessary non-breaking spaces (nbsp, U+00A0, 0xc2a0 in
UTF-8) in the docs. This commit replaces them with ASCII spaces
(0x20).
config.sgml is backpatched through 17.
ref/drop_extension.sgml is backpatched through 13.
Discussion: https://postgr.es/m/20240930.153404.202479334310259810.ishii%40postgresql.org
Reviewed-by: Yugo Nagata, Daniel Gustafsson
Backpatch-through: 17, 13
Since v17, CREATE MATERIALIZED VIEW has set search_path to
"pg_catalog, pg_temp" while running the query. The docs for the
other commands that restrict search_path mention it, but the page
for CREATE MATERIALIZED VIEW does not. Fix that.
Oversight in commit 4b74ebf726.
Author: Yugo Nagata
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20240805160502.d2a4975802a832b1e04afb80%40sraoss.co.jp
Backpatch-through: 17
FYI, during PDF builds, this link type generates a "Unresolved ID
reference found" warning because it is suppressed from the PDF output.
Backpatch-through: 12
The previous documentation stated that num_timed reflects the number of
scheduled checkpoints performed. However, checkpoints may be skipped
if the server has been idle, and num_timed counts both skipped and completed
checkpoints. This commit clarifies the description to make it clear that
the counter includes both skipped and completed checkpoints.
Back-patch to v17 where pg_stat_checkpointer was added.
Author: Fujii Masao
Reviewed-by: Alexander Korotkov
Discussion: https://postgr.es/m/9ea77f40-818d-4841-9dee-158ac8f6e690@oss.nttdata.com
Since we introduced unlogged sequences in v15, identity sequences
have defaulted to having the same persistence as their owning table.
However, it is possible to change that with ALTER SEQUENCE, and
pg_dump tries to preserve the logged-ness of sequences when it doesn't
match (as indeed it wouldn't for an unlogged table from before v15).
The fly in the ointment is that ALTER SEQUENCE SET [UN]LOGGED fails
in binary-upgrade mode, because it needs to assign a new relfilenode
which we cannot permit in that mode. Thus, trying to pg_upgrade a
database containing a mismatching identity sequence failed.
To fix, add syntax to ADD/ALTER COLUMN GENERATED AS IDENTITY to allow
the sequence's persistence to be set correctly at creation, and use
that instead of ALTER SEQUENCE SET [UN]LOGGED in pg_dump. (I tried to
make SET [UN]LOGGED work without any pg_dump modifications, but that
seems too fragile to be a desirable answer. This way should be
markedly faster anyhow.)
In passing, document the previously-undocumented SEQUENCE NAME option
that pg_dump also relies on for identity sequences; I see no value
in trying to pretend it doesn't exist.
Per bug #18618 from Anthony Hsu.
Back-patch to v15 where we invented this stuff.
Discussion: https://postgr.es/m/18618-d4eb26d669ed110a@postgresql.org
Historically we've used timezone "PST8PDT", but the recent release
2024b of tzdb changes the definition of that zone in a way that
breaks many test cases concerned with dates before 1970. Although
we've not yet adopted 2024b into our own tree, this is already
problematic for people using --with-system-tzdata if their platform
has already adopted 2024b. To work with both older and newer
versions of tzdb, switch to using "America/Los_Angeles", accepting
the ensuing changes in regression test results.
Back-patch to all supported branches.
Per report and patch from Wolfgang Walther.
Discussion: https://postgr.es/m/0a997455-5aba-4cf2-a354-d26d8bcbfae6@technowledgy.de
Michael Paquier