Since PG 8.2, @ and ~ have been deprecated aliases for the containment
operators @> and <@. It seems like enough time has passed to actually
remove them, so do so.
This completes the project begun in commit 2f70fdb06. Note that in
the core types, the relation to the preferred operator names was
reversed from what it is in these contrib modules. The confusion
that induced was a large part of the reason for deprecation.
Justin Pryzby
Discussion: https://postgr.es/m/20201027032511.GF9241@telsasoft.com
Andres Freund pointed out that allowing non-superusers to run
"CREATE EXTENSION ... FROM unpackaged" has security risks, since
the unpackaged-to-1.0 scripts don't try to verify that the existing
objects they're modifying are what they expect. Just attaching such
objects to an extension doesn't seem too dangerous, but some of them
do more than that.
We could have resolved this, perhaps, by still requiring superuser
privilege to use the FROM option. However, it's fair to ask just what
we're accomplishing by continuing to lug the unpackaged-to-1.0 scripts
forward. None of them have received any real testing since 9.1 days,
so they may not even work anymore (even assuming that one could still
load the previous "loose" object definitions into a v13 database).
And an installation that's trying to go from pre-9.1 to v13 or later
in one jump is going to have worse compatibility problems than whether
there's a trivial way to convert their contrib modules into extension
style.
Hence, let's just drop both those scripts and the core-code support
for "CREATE EXTENSION ... FROM".
Discussion: https://postgr.es/m/20200213233015.r6rnubcvl4egdh5r@alap3.anarazel.de
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
We're currently maintaining two outputs for cube regression test. But that
appears to be unsuitable, because these outputs are different in out few checks
involving scientific notation. So, split checks involving scientific notation
into separate test, making contrib/cube easier to maintain. Backpatch to all
supported versions in order to make further backpatching easier.
Discussion: https://postgr.es/m/CAPpHfdvJgWjxHsJTtT%2Bo1tz3OR8EFHcLQjhp-d3%2BUcmJLh-fQA%40mail.gmail.com
Author: Alexander Korotkov
Backpatch-through: 9.3
This allows out-of-tree PLs and similar code to get access to
definitions needed to work with extension data types.
The following existing modules now install headers: contrib/cube,
contrib/hstore, contrib/isn, contrib/ltree, contrib/seg.
Discussion: https://postgr.es/m/87y3euomjh.fsf%40news-spur.riddles.org.uk
To do this, we only have to remove the compress and decompress support
functions, which have never done anything more than detoasting.
In the wake of commit d3a4f89d8, this results in automatically enabling
index-only scans, since the core code will now know that the stored
representation is the same as the original data (up to detoasting).
The only exciting part of this is that ALTER OPERATOR FAMILY lacks
a way to drop a support function that was declared as being part of
an opclass rather than being loose in the family. For the moment,
we'll hack our way to a solution with a manual update of the pg_depend
entry type, which is what distinguishes the two cases. Perhaps
someday it'll be worth providing a cleaner way to do that, but for
now it seems like a very niche problem.
Note that the underlying C functions remain, to support use of the shared
libraries with older versions of the modules' SQL declarations. Someday
we may be able to remove them, but not soon.
Andrey Borodin, reviewed by me
Discussion: https://postgr.es/m/D0F53A05-4F4A-4DEC-8339-3C069FA0EE11@yandex-team.ru
Historically, the selectivity functions have simply not distinguished
< from <=, or > from >=, arguing that the fraction of the population that
satisfies the "=" aspect can be considered to be vanishingly small, if the
comparison value isn't any of the most-common-values for the variable.
(If it is, the code path that executes the operator against each MCV will
take care of things properly.) But that isn't really true unless we're
dealing with a continuum of variable values, and in practice we seldom are.
If "x = const" would estimate a nonzero number of rows for a given const
value, then it follows that we ought to estimate different numbers of rows
for "x < const" and "x <= const", even if the const is not one of the MCVs.
Handling this more honestly makes a significant difference in edge cases,
such as the estimate for a tight range (x BETWEEN y AND z where y and z
are close together).
Hence, split scalarltsel into scalarltsel/scalarlesel, and similarly
split scalargtsel into scalargtsel/scalargesel. Adjust <= and >=
operator definitions to reference the new selectivity functions.
Improve the core ineq_histogram_selectivity() function to make a
correction for equality. (Along the way, I learned quite a bit about
exactly why that function gives good answers, which I tried to memorialize
in improved comments.)
The corresponding join selectivity functions were, and remain, just stubs.
But I chose to split them similarly, to avoid confusion and to prevent the
need for doing this exercise again if someone ever makes them less stubby.
In passing, change ineq_histogram_selectivity's clamp for extreme
probability estimates so that it varies depending on the histogram
size, instead of being hardwired at 0.0001. With the default histogram
size of 100 entries, you still get the old clamp value, but bigger
histograms should allow us to put more faith in edge values.
Tom Lane, reviewed by Aleksander Alekseev and Kuntal Ghosh
Discussion: https://postgr.es/m/12232.1499140410@sss.pgh.pa.us
In commits 9ff60273e3 and dbe2328959 I (tgl) fixed the
signatures of a bunch of contrib's GIN and GIST support functions so that
they would pass validation by the recently-added amvalidate functions.
The backend does not actually consult or check those signatures otherwise,
so I figured this was basically cosmetic and did not require an extension
version bump. However, Alexander Korotkov pointed out that that would
leave us in a pretty messy situation if we ever wanted to redefine those
functions later, because there wouldn't be a unique way to name them.
Since we're going to be bumping these extensions' versions anyway for
parallel-query cleanups, let's take care of this now.
Andreas Karlsson, adjusted for more search-path-safety by me
Introduce distance operators over cubes:
<#> taxicab distance
<-> euclidean distance
<=> chebyshev distance
Also add kNN support of those distances in GiST opclass.
Author: Stas Kelvich
Prominent binaries already had this metadata. A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.
Michael Paquier, reviewed by MauMau.
Numerous flex and bison make rules have appeared in the source tree
over time, and they are all virtually identical, so we can replace
them by pattern rules with some variables for customization.
Users of pgxs will also be able to benefit from this.
This isn't fully tested as yet, in particular I'm not sure that the
"foo--unpackaged--1.0.sql" scripts are OK. But it's time to get some
buildfarm cycles on it.
sepgsql is not converted to an extension, mainly because it seems to
require a very nonstandard installation process.
Dimitri Fontaine and Tom Lane
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
installations whose pg_config program does not appear first in the PATH.
Per gripe from Eddie Stanley and subsequent discussions with Fabien Coelho
and others.
(respectively) to rename yylex and related symbols. Some were doing
it this way already, while others used not-too-reliable sed hacks in
the Makefiles. It's all nice and consistent now.
>
> The patch adds missing the "libpgport.a" file to the installation under
> "install-all-headers". It is needed by some contribs. I install the
> library in "pkglibdir", but I was wondering whether it should be "libdir"?
> I was wondering also whether it would make sense to have a "libpgport.so"?
>
> It fixes various macros which are used by contrib makefiles, especially
> libpq_*dir and LDFLAGS when used under PGXS. It seems to me that they are
> needed to
>
> It adds the ability to test and use PGXS with contribs, with "make
> USE_PGXS=1". Without the macro, this is exactly as before, there should be
> no difference, esp. wrt the vpath feature that seemed broken by previous
> submission. So it should not harm anybody, and it is useful at least to me.
>
> It fixes some inconsistencies in various contrib makefiles
> (useless override, ":=" instead of "=").
Fabien COELHO
bison 1.875 and later as we did from earlier bison releases. Eventually
we will probably want to adopt the newer message spelling ... but not yet.
Per recent discussion on pgpatches.
Note: I didn't change the build rules for bootstrap, ecpg, or plpgsql
grammars, since these do not affect regression test results.
(usually bison output files), not as standalone files. This hack
works around flex's insistence on including <stdio.h> before we are
able to include postgres.h; postgres.h will already be read before
the compiler starts to read the flex output file. Needed for largefile
support on some platforms.
written a generic framework of rules that the contrib makefiles can
use instead of writing their own each time. You only need to set a few
variables and off you go.
Cygwin with the possible exception of mSQL-interface. Since I don't
have mSQL installed, I skipped this tool.
Except for dealing with a missing getopt.h (oid2name) and HUGE (seg),
the bulk of the patch uses the standard PostgreSQL approach to deal with
Windows DLL issues.
I tested the build aspect of this patch under Cygwin and Linux without
any ill affects. Note that I did not actually attempt to test the code
for functionality.
The procedure to apply the patch is as follows:
$ # save the attachment as /tmp/contrib.patch
$ # change directory to the top of the PostgreSQL source tree
$ patch -p0 </tmp/contrib.patch
Jason
John Naylor