CREATE INDEX CONCURRENTLY). Such an index might not have entries for every
heap row and thus clustering with it would result in silent data loss.
The scenario requires a pretty foolish DBA, but still ...
FreezeXid introduced in a recent commit, so there isn't any data loss in this
approach.
Doing it causes ALTER TABLE (or rather, the forms of it that cause a full table
rewrite) to be affected as well. In this case, the frozen point is RecentXmin,
because after the rewrite all the tuples are relabeled with the rewriting
transaction's Xid.
TOAST tables are fixed automatically as well, as fallout of the way they were
already being handled in the respective code paths.
With this patch, there is no longer need to VACUUM tables for Xid wraparound
purposes that have been cleaned up via TRUNCATE or CLUSTER.
to avoid losing useful Xid information in not-so-old tuples. This makes
CLUSTER behave the same as VACUUM as far a tuple-freezing behavior goes
(though CLUSTER does not yet advance the table's relfrozenxid).
While at it, move the actual freezing operation in rewriteheap.c to a more
appropriate place, and document it thoroughly. This part of the patch from
Tom Lane.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
the rel, it's easy to get rid of the narrow race-condition window that
used to exist in VACUUM and CLUSTER. Did some minor code-beautification
work in the same area, too.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
created in the bootstrap phase proper, rather than added after-the-fact
by initdb. This is cleaner than before because it allows us to retire the
undocumented ALTER TABLE ... CREATE TOAST TABLE command, but the real reason
I'm doing it is so that toast tables of shared catalogs will now have
predetermined OIDs. This will allow a reasonably clean solution to the
problem of locking tables before we load their relcache entries, to appear
in a forthcoming patch.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
This formulation requires every AM to provide amvacuumcleanup, unlike before,
but it's surely a whole lot cleaner. Also, add an 'amstorage' column to
pg_am so that we can get rid of hardwired knowledge in DefineOpClass().
if we already have a stronger lock due to the index's table being the
update target table of the query. Same optimization I applied earlier
at the table level. There doesn't seem to be much interest in the more
radical idea of not locking indexes at all, so do what we can ...
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
the parent table, even if the command that creates them is executed by
someone else (such as a superuser or a member of the owning role).
Per gripe from Michael Fuhr.
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
indexes. Extend the macros in include/catalog/*.h to carry the info
about hand-assigned OIDs, and adjust the genbki script and bootstrap
code to make the relations actually get those OIDs. Remove the small
number of RelOid_pg_foo macros that we had in favor of a complete
set named like the catname.h and indexing.h macros. Next phase will
get rid of internal use of names for looking up catalogs and indexes;
but this completes the changes forcing an initdb, so it looks like a
good place to commit.
Along the way, I made the shared relations (pg_database etc) not be
'bootstrap' relations any more, so as to reduce the number of hardwired
entries and simplify changing those relations in future. I'm not
sure whether they ever really needed to be handled as bootstrap
relations, but it seems to work fine to not do so now.
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
to write out data that we are about to tell the filesystem to drop.
smgr_internal_unlink already had a DropRelFileNodeBuffers call to
get rid of dead buffers without a write after it's no longer possible
to roll back the deleting transaction. Adding a similar call in
smgrtruncate simplifies callers and makes the overall division of
labor clearer. This patch removes the former behavior that VACUUM
would write all dirty buffers of a relation unconditionally.
there are corner cases involving dropping toasted columns in which the
previous coding would fail, too: the new version of the table might not
have any TOAST table, but we'd still propagate possibly-wide values of
dropped columns forward.
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
rather than an error code, and does elog(ERROR) not elog(WARNING)
when it detects a problem. All callers were simply elog(ERROR)'ing on
failure return anyway, and I find it hard to envision a caller that would
not, so we may as well simplify the callers and produce the more useful
error message directly.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
in favor of using the REINDEX TABLE apparatus, which does the same thing
simpler and faster. Also, make TRUNCATE not use cluster.c at all, but
just assign a new relfilenode and REINDEX. This partially addresses
Hartmut Raschick's complaint from last December that 7.4's TRUNCATE is
an order of magnitude slower than prior releases. By getting rid of
a lot of unnecessary catalog updates, these changes buy back about a
factor of two (on my system). The remaining overhead seems associated
with creating and deleting storage files, which we may not be able to
do much about without abandoning transaction safety for TRUNCATE.
modify. Also fix a passel of problems with ALTER TABLE CLUSTER ON:
failure to check that the index is safe to cluster on (or even belongs
to the indicated rel, or even exists), and failure to broadcast a relcache
flush event when changing an index's state.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
remove separate implementation of ALTER TABLE SET WITHOUT OIDS in favor
of doing a regular DROP. Also, cause CREATE TABLE to account completely
correctly for the inheritance status of the OID column. This fixes
problems with dropping OID columns that have dependencies, as noted by
Christopher Kings-Lynne, as well as making sure that you can't drop an
OID column that was inherited from a parent.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
Bruce Momjian