There are a number of Remove${Something}ById() functions that are
essentially identical in structure and only different in which catalog
they are working on. Refactor this to be one generic function. The
information about which oid column, index, etc. to use was already
available in ObjectProperty for most catalogs, in a few cases it was
easily added.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/331d9661-1743-857f-1cbb-d5728bcd62cb%402ndquadrant.com
In the footsteps of aaf069aa3, remove ACLDEBUG, which was the only
other remaining undocumented symbol in pg_config_manual.h. The fact
that nobody had bothered to document it in seventeen years is a good
clue to its usefulness. In practice, none of the tracing logic it
enabled would be of any value without additional effort.
Discussion: https://postgr.es/m/6631.1587565046@sss.pgh.pa.us
recordExtObjInitPriv and removeExtObjInitPriv were sloppy about
calling ReleaseSysCache. The cases cannot occur given current usage
in ALTER EXTENSION ADD/DROP, since we wouldn't get here for these
relkinds; but it seems wise to clean up better.
In passing, extend test logic in test_pg_dump to exercise the
dropped-column code paths here.
Since the case is unreachable at present, there seems no great
need to back-patch; hence fix HEAD only.
Kyotaro Horiguchi, with test case and comment adjustments by me
Discussion: https://postgr.es/m/20200417.151831.1153577605111650154.horikyota.ntt@gmail.com
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
Previously, allow_system_table_mods allowed a non-superuser to do DML
on a system table without further permission checks. This has been
removed, as it was quite inconsistent with the rest of the meaning of
this setting. (Since allow_system_table_mods was previously only
accessible with a server restart, it is unlikely that anyone was using
this possibility.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8b00ea5e-28a7-88ba-e848-21528b632354%402ndquadrant.com
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Too allow table accesses to be not directly dependent on heap, several
new abstractions are needed. Specifically:
1) Heap scans need to be generalized into table scans. Do this by
introducing TableScanDesc, which will be the "base class" for
individual AMs. This contains the AM independent fields from
HeapScanDesc.
The previous heap_{beginscan,rescan,endscan} et al. have been
replaced with a table_ version.
There's no direct replacement for heap_getnext(), as that returned
a HeapTuple, which is undesirable for a other AMs. Instead there's
table_scan_getnextslot(). But note that heap_getnext() lives on,
it's still used widely to access catalog tables.
This is achieved by new scan_begin, scan_end, scan_rescan,
scan_getnextslot callbacks.
2) The portion of parallel scans that's shared between backends need
to be able to do so without the user doing per-AM work. To achieve
that new parallelscan_{estimate, initialize, reinitialize}
callbacks are introduced, which operate on a new
ParallelTableScanDesc, which again can be subclassed by AMs.
As it is likely that several AMs are going to be block oriented,
block oriented callbacks that can be shared between such AMs are
provided and used by heap. table_block_parallelscan_{estimate,
intiialize, reinitialize} as callbacks, and
table_block_parallelscan_{nextpage, init} for use in AMs. These
operate on a ParallelBlockTableScanDesc.
3) Index scans need to be able to access tables to return a tuple, and
there needs to be state across individual accesses to the heap to
store state like buffers. That's now handled by introducing a
sort-of-scan IndexFetchTable, which again is intended to be
subclassed by individual AMs (for heap IndexFetchHeap).
The relevant callbacks for an AM are index_fetch_{end, begin,
reset} to create the necessary state, and index_fetch_tuple to
retrieve an indexed tuple. Note that index_fetch_tuple
implementations need to be smarter than just blindly fetching the
tuples for AMs that have optimizations similar to heap's HOT - the
currently alive tuple in the update chain needs to be fetched if
appropriate.
Similar to table_scan_getnextslot(), it's undesirable to continue
to return HeapTuples. Thus index_fetch_heap (might want to rename
that later) now accepts a slot as an argument. Core code doesn't
have a lot of call sites performing index scans without going
through the systable_* API (in contrast to loads of heap_getnext
calls and working directly with HeapTuples).
Index scans now store the result of a search in
IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the
target is not generally a HeapTuple anymore that seems cleaner.
To be able to sensible adapt code to use the above, two further
callbacks have been introduced:
a) slot_callbacks returns a TupleTableSlotOps* suitable for creating
slots capable of holding a tuple of the AMs
type. table_slot_callbacks() and table_slot_create() are based
upon that, but have additional logic to deal with views, foreign
tables, etc.
While this change could have been done separately, nearly all the
call sites that needed to be adapted for the rest of this commit
also would have been needed to be adapted for
table_slot_callbacks(), making separation not worthwhile.
b) tuple_satisfies_snapshot checks whether the tuple in a slot is
currently visible according to a snapshot. That's required as a few
places now don't have a buffer + HeapTuple around, but a
slot (which in heap's case internally has that information).
Additionally a few infrastructure changes were needed:
I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now
internally uses a slot to keep track of tuples. While
systable_getnext() still returns HeapTuples, and will so for the
foreseeable future, the index API (see 1) above) now only deals with
slots.
The remainder, and largest part, of this commit is then adjusting all
scans in postgres to use the new APIs.
Author: Andres Freund, Haribabu Kommi, Alvaro Herrera
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
Most of these had been obsoleted by 568d4138c / the SnapshotNow
removal.
This is is preparation for moving most of tqual.[ch] into either
snapmgr.h or heapam.h, which in turn is in preparation for pluggable
table AMs.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
This patch fixes several related cases in which pg_shdepend entries were
never made, or were lost, for references to roles appearing in the ACLs of
schemas and/or types. While that did no immediate harm, if a referenced
role were later dropped, the drop would be allowed and would leave a
dangling reference in the object's ACL. That still wasn't a big problem
for normal database usage, but it would cause obscure failures in
subsequent dump/reload or pg_upgrade attempts, taking the form of
attempts to grant privileges to all-numeric role names. (I think I've
seen field reports matching that symptom, but can't find any right now.)
Several cases are fixed here:
1. ALTER DOMAIN SET/DROP DEFAULT would lose the dependencies for any
existing ACL entries for the domain. This case is ancient, dating
back as far as we've had pg_shdepend tracking at all.
2. If a default type privilege applies, CREATE TYPE recorded the
ACL properly but forgot to install dependency entries for it.
This dates to the addition of default privileges for types in 9.2.
3. If a default schema privilege applies, CREATE SCHEMA recorded the
ACL properly but forgot to install dependency entries for it.
This dates to the addition of default privileges for schemas in v10
(commit ab89e465c).
Another somewhat-related problem is that when creating a relation
rowtype or implicit array type, TypeCreate would apply any available
default type privileges to that type, which we don't really want
since such an object isn't supposed to have privileges of its own.
(You can't, for example, drop such privileges once they've been added
to an array type.)
ab89e465c is also to blame for a race condition in the regression tests:
privileges.sql transiently installed globally-applicable default
privileges on schemas, which sometimes got absorbed into the ACLs of
schemas created by concurrent test scripts. This should have resulted
in failures when privileges.sql tried to drop the role holding such
privileges; but thanks to the bug fixed here, it instead led to dangling
ACLs in the final state of the regression database. We'd managed not to
notice that, but it became obvious in the wake of commit da906766c, which
allowed the race condition to occur in pg_upgrade tests.
To fix, add a function recordDependencyOnNewAcl to encapsulate what
callers of get_user_default_acl need to do; while the original call
sites got that right via ad-hoc code, none of the later-added ones
have. Also change GenerateTypeDependencies to generate these
dependencies, which requires adding the typacl to its parameter list.
(That might be annoying if there are any extensions calling that
function directly; but if there are, they're most likely buggy in the
same way as the core callers were, so they need work anyway.) While
I was at it, I changed GenerateTypeDependencies to accept most of its
parameters in the form of a Form_pg_type pointer, making its parameter
list a bit less unwieldy and mistake-prone.
The test race condition is fixed just by wrapping the addition and
removal of default privileges into a single transaction, so that that
state is never visible externally. We might eventually prefer to
separate out tests of default privileges into a script that runs by
itself, but that would be a bigger change and would make the tests
run slower overall.
Back-patch relevant parts to all supported branches.
Discussion: https://postgr.es/m/15719.1541725287@sss.pgh.pa.us
Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.
Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.
The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g. catalog relations) NULL can be passed for this
argument.
Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.
Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com
Rationalize a couple of macro names:
* In catalog/pg_init_privs.h, rename Anum_pg_init_privs_privs to
Anum_pg_init_privs_initprivs to match the column's actual name.
* In ecpg, rename ZPBITOID to BITOID to match catalog/pg_type.h.
This reduces reader confusion, and will allow us to generate these
macros automatically in future.
In catalog/pg_tablespace.h, fix the ordering of related DATA and
#define lines to agree with how it's done elsewhere. This has no
impact today, but simplifies life for the bootstrap data conversion
scripts.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGXnLH=BSo0x-aA818f=MyQqGS5nM-GDCWAMdnvQJTRC1A@mail.gmail.com
The new column distinguishes normal functions, procedures, aggregates,
and window functions. This replaces the existing columns proisagg and
proiswindow, and replaces the convention that procedures are indicated
by prorettype == 0. Also change prorettype to be VOIDOID for procedures.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Apparently, Peter's compiler has faith that the switch test values here
could never not be valid values of their enums. Mine does not, and
I tend to agree with it.
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
There used to be a lot of different *Type and *Kind symbol groups to
address objects within different commands, most of which have been
replaced by ObjectType, starting with
b256f24264. But this conversion was never
done for the ACL commands until now.
This change ends up being just a plain replacement of the types and
symbols, without any code restructuring needed, except deleting some now
redundant code.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Stephen Frost <sfrost@snowman.net>
When CREATE INDEX is run on a partitioned table, create catalog entries
for an index on the partitioned table (which is just a placeholder since
the table proper has no data of its own), and recurse to create actual
indexes on the existing partitions; create them in future partitions
also.
As a convenience gadget, if the new index definition matches some
existing index in partitions, these are picked up and used instead of
creating new ones. Whichever way these indexes come about, they become
attached to the index on the parent table and are dropped alongside it,
and cannot be dropped on isolation unless they are detached first.
To support pg_dump'ing these indexes, add commands
CREATE INDEX ON ONLY <table>
(which creates the index on the parent partitioned table, without
recursing) and
ALTER INDEX ATTACH PARTITION
(which is used after the indexes have been created individually on each
partition, to attach them to the parent index). These reconstruct prior
database state exactly.
Reviewed-by: (in alphabetical order) Peter Eisentraut, Robert Haas, Amit
Langote, Jesper Pedersen, Simon Riggs, David Rowley
Discussion: https://postgr.es/m/20171113170646.gzweigyrgg6pwsg4@alvherre.pgsql
This adds a new object type "procedure" that is similar to a function
but does not have a return type and is invoked by the new CALL statement
instead of SELECT or similar. This implementation is aligned with the
SQL standard and compatible with or similar to other SQL implementations.
This commit adds new commands CALL, CREATE/ALTER/DROP PROCEDURE, as well
as ALTER/DROP ROUTINE that can refer to either a function or a
procedure (or an aggregate function, as an extension to SQL). There is
also support for procedures in various utility commands such as COMMENT
and GRANT, as well as support in pg_dump and psql. Support for defining
procedures is available in all the languages supplied by the core
distribution.
While this commit is mainly syntax sugar around existing functionality,
future features will rely on having procedures as a separate object
type.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
get_partition_parent felt that it could simply Assert that systable_getnext
found a tuple. This is unlike any other caller of that function, and it's
unsafe IMO --- in fact, the reason I noticed it was that the Assert failed.
(OK, I was working with known-inconsistent catalog contents, but I wasn't
expecting the DB to fall over quite that violently. The behavior in a
non-assert-enabled build wouldn't be very nice, either.) Fix it to do what
other callers do, namely an actual runtime-test-and-elog.
Also, standardize the wording of elog messages that are complaining about
unexpected failure of systable_getnext. 90% of them say "could not find
tuple for <object>", so make the remainder do likewise. Many of the
holdouts were using the phrasing "cache lookup failed", which is outright
misleading since no catcache search is involved.
Consistently refer to such an entry as a "statistics object", not just
"statistics" or "extended statistics". Previously we had a mismash of
terms, accompanied by utter confusion as to whether the term was
singular or plural. That's not only grating (at least to the ear of
a native English speaker) but could be outright misleading, eg in error
messages that seemed to be referring to multiple objects where only one
could be meant.
This commit fixes the code and a lot of comments (though I may have
missed a few). I also renamed two new SQL functions,
pg_get_statisticsextdef -> pg_get_statisticsobjdef
pg_statistic_ext_is_visible -> pg_statistics_obj_is_visible
to conform better with this terminology.
I have not touched the SGML docs other than fixing those function
names; the docs certainly need work but it seems like a separable task.
Discussion: https://postgr.es/m/22676.1494557205@sss.pgh.pa.us
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.czhttps://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
The old function took function name and function argument list as
separate arguments. Now that all function signatures are passed around
as ObjectWithArgs structs, this is no longer necessary and can be
replaced by a function that takes ObjectWithArgs directly. Similarly
for aggregates and operators.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This makes the handling of operators similar to that of functions and
aggregates.
Rename node FuncWithArgs to ObjectWithArgs, to reflect the expanded use.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This extends the work done in commit 2f5c9d9c9 to provide a more nearly
complete abstraction layer hiding the details of index updating for catalog
changes. That commit only invented abstractions for catalog inserts and
updates, leaving nearby code for catalog deletes still calling the
heap-level routines directly. That seems rather ugly from here, and it
does little to help if we ever want to shift to a storage system in which
indexing work is needed at delete time.
Hence, create a wrapper function CatalogTupleDelete(), and replace calls
of simple_heap_delete() on catalog tuples with it. There are now very
few direct calls of [simple_]heap_delete remaining in the tree.
Discussion: https://postgr.es/m/462.1485902736@sss.pgh.pa.us
Split the existing CatalogUpdateIndexes into two different routines,
CatalogTupleInsert and CatalogTupleUpdate, which do both the heap
insert/update plus the index update. This removes over 300 lines of
boilerplate code all over src/backend/catalog/ and src/backend/commands.
The resulting code is much more pleasing to the eye.
Also, by encapsulating what happens in detail during an UPDATE, this
facilitates the upcoming WARM patch, which is going to add a few more
lines to the update case making the boilerplate even more boring.
The original CatalogUpdateIndexes is removed; there was only one use
left, and since it's just three lines, we can as well expand it in place
there. We could keep it, but WARM is going to break all the UPDATE
out-of-core callsites anyway, so there seems to be no benefit in doing
so.
Author: Pavan Deolasee
Discussion: https://www.postgr.es/m/CABOikdOcFYSZ4vA2gYfs=M2cdXzXX4qGHeEiW3fu9PCfkHLa2A@mail.gmail.com
In commit 6c268df, pg_init_privs was added to track the initial
privileges of catalog objects and extensions. Unfortunately, that
commit didn't include understanding of ALTER EXTENSION ADD/DROP, which
allows the objects associated with an extension to be changed after the
initial CREATE EXTENSION script has been run.
The result of this meant that ACLs for objects added through
ALTER EXTENSION ADD were not recorded into pg_init_privs and we would
end up including those ACLs in pg_dump when we shouldn't have.
This commit corrects that by making sure to have pg_init_privs updated
when ALTER EXTENSION ADD/DROP is run, recording the permissions as they
are at ALTER EXTENSION ADD time, and removing any if/when ALTER
EXTENSION DROP is called.
This issue was pointed out by Moshe Jacobson as commentary on bug #14456
(which was actually a bug about versions prior to 9.6 not handling
custom ACLs on extensions correctly, an issue now addressed with
pg_init_privs in 9.6).
Back-patch to 9.6 where pg_init_privs was introduced.
This avoids additional translatable strings for each distinct type, as
well as making our quoting style around type names more consistent
(namely, that we don't quote type names). This continues what started
as f402b99501.
Discussion: https://postgr.es/m/20160401170642.GA57509@alvherre.pgsql
Most code was casting this through a generic Node. By declaring
everything as RoleSpec appropriately, we can remove a bunch of casts and
ad-hoc node type checking.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
Add a location field to the DefElem struct, used to parse many utility
commands. Update various error messages to supply error position
information.
To propogate the error position information in a more systematic way,
create a ParseState in standard_ProcessUtility() and pass that to
interested functions implementing the utility commands. This seems
better than passing the query string and then reassembling a parse state
ad hoc, which violates the encapsulation of the ParseState type.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Peter Eisentraut