56 Commits (7fbc75b26ed8ec70c729c5e7f8233896c54c900f)

Author	SHA1	Message	Date
Robert Haas	e89a71fb44	Pass InitPlan values to workers via Gather (Merge). ... If a PARAM_EXEC parameter is used below a Gather (Merge) but the InitPlan that computes it is attached to or above the Gather (Merge), force the value to be computed before starting parallelism and pass it down to all workers. This allows us to use parallelism in cases where it previously would have had to be rejected as unsafe. We do - in this case - lose the optimization that the value is only computed if it's actually used. An alternative strategy would be to have the first worker that needs the value compute it, but one downside of that approach is that we'd then need to select a parallel-safe path to compute the parameter value; it couldn't for example contain a Gather (Merge) node. At some point in the future, we might want to consider both approaches. Independent of that consideration, there is a great deal more work that could be done to make more kinds of PARAM_EXEC parameters parallel-safe. This infrastructure could be used to allow a Gather (Merge) on the inner side of a nested loop (although that's not a very appealing plan) and cases where the InitPlan is attached below the Gather (Merge) could be addressed as well using various techniques. But this is a good start. Amit Kapila, reviewed and revised by me. Reviewing and testing from Kuntal Ghosh, Haribabu Kommi, and Tushar Ahuja. Discussion: http://postgr.es/m/CAA4eK1LV0Y1AUV4cUCdC+sYOx0Z0-8NAJ2Pd9=UKsbQ5Sr7+JQ@mail.gmail.com	8 years ago
Tom Lane	c12d570fa1	Support arrays over domains. ... Allowing arrays with a domain type as their element type was left un-done in the original domain patch, but not for any very good reason. This omission leads to such surprising results as array_agg() not working on a domain column, because the parser can't identify a suitable output type for the polymorphic aggregate. In order to fix this, first clean up the APIs of coerce_to_domain() and some internal functions in parse_coerce.c so that we consistently pass around a CoercionContext along with CoercionForm. Previously, we sometimes passed an "isExplicit" boolean flag instead, which is strictly less information; and coerce_to_domain() didn't even get that, but instead had to reverse-engineer isExplicit from CoercionForm. That's contrary to the documentation in primnodes.h that says that CoercionForm only affects display and not semantics. I don't think this change fixes any live bugs, but it makes things more consistent. The main reason for doing it though is that now build_coercion_expression() receives ccontext, which it needs in order to be able to recursively invoke coerce_to_target_type(). Next, reimplement ArrayCoerceExpr so that the node does not directly know any details of what has to be done to the individual array elements while performing the array coercion. Instead, the per-element processing is represented by a sub-expression whose input is a source array element and whose output is a target array element. This simplifies life in parse_coerce.c, because it can build that sub-expression by a recursive invocation of coerce_to_target_type(). The executor now handles the per-element processing as a compiled expression instead of hard-wired code. The main advantage of this is that we can use a single ArrayCoerceExpr to handle as many as three successive steps per element: base type conversion, typmod coercion, and domain constraint checking. The old code used two stacked ArrayCoerceExprs to handle type + typmod coercion, which was pretty inefficient, and adding yet another array deconstruction to do domain constraint checking seemed very unappetizing. In the case where we just need a single, very simple coercion function, doing this straightforwardly leads to a noticeable increase in the per-array-element runtime cost. Hence, add an additional shortcut evalfunc in execExprInterp.c that skips unnecessary overhead for that specific form of expression. The runtime speed of simple cases is within 1% or so of where it was before, while cases that previously required two levels of array processing are significantly faster. Finally, create an implicit array type for every domain type, as we do for base types, enums, etc. Everything except the array-coercion case seems to just work without further effort. Tom Lane, reviewed by Andrew Dunstan Discussion: https://postgr.es/m/9852.1499791473@sss.pgh.pa.us	8 years ago
Tom Lane	decb08ebdf	Code review for NextValueExpr expression node type. ... Add missing infrastructure for this node type, notably in ruleutils.c where its lack could demonstrably cause EXPLAIN to fail. Add outfuncs/readfuncs support. (outfuncs support is useful today for debugging purposes. The readfuncs support may never be needed, since at present it would only matter for parallel query and NextValueExpr should never appear in a parallelizable query; but it seems like a bad idea to have a primnode type that isn't fully supported here.) Teach planner infrastructure that NextValueExpr is a volatile, parallel-unsafe, non-leaky expression node with cost cpu_operator_cost. Given its limited scope of usage, there *might* be no live bug today from the lack of that knowledge, but it's certainly going to bite us on the rear someday. Teach pg_stat_statements about the new node type, too. While at it, also teach cost_qual_eval() that MinMaxExpr, SQLValueFunction, XmlExpr, and CoerceToDomain should be charged as cpu_operator_cost. Failing to do this for SQLValueFunction was an oversight in my commit 0bb51aa96. The others are longer-standing oversights, but no time like the present to fix them. (In principle, CoerceToDomain could have cost much higher than this, but it doesn't presently seem worth trying to examine the domain's constraints here.) Modify execExprInterp.c to execute NextValueExpr as an out-of-line function; it seems quite unlikely to me that it's worth insisting that it be inlined in all expression eval methods. Besides, providing the out-of-line function doesn't stop anyone from inlining if they want to. Adjust some places where NextValueExpr support had been inserted with the aid of a dartboard rather than keeping it in the same order as elsewhere. Discussion: https://postgr.es/m/23862.1499981661@sss.pgh.pa.us	9 years ago
Tom Lane	c7b8998ebb	Phase 2 of pgindent updates. ... Change pg_bsd_indent to follow upstream rules for placement of comments to the right of code, and remove pgindent hack that caused comments following #endif to not obey the general rule. Commit e3860ffa4d wasn't actually using the published version of pg_bsd_indent, but a hacked-up version that tried to minimize the amount of movement of comments to the right of code. The situation of interest is where such a comment has to be moved to the right of its default placement at column 33 because there's code there. BSD indent has always moved right in units of tab stops in such cases --- but in the previous incarnation, indent was working in 8-space tab stops, while now it knows we use 4-space tabs. So the net result is that in about half the cases, such comments are placed one tab stop left of before. This is better all around: it leaves more room on the line for comment text, and it means that in such cases the comment uniformly starts at the next 4-space tab stop after the code, rather than sometimes one and sometimes two tabs after. Also, ensure that comments following #endif are indented the same as comments following other preprocessor commands such as #else. That inconsistency turns out to have been self-inflicted damage from a poorly-thought-through post-indent "fixup" in pgindent. This patch is much less interesting than the first round of indent changes, but also bulkier, so I thought it best to separate the effects. Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us	9 years ago
Peter Eisentraut	3217327053	Identity columns ... This is the SQL standard-conforming variant of PostgreSQL's serial columns. It fixes a few usability issues that serial columns have: - CREATE TABLE / LIKE copies default but refers to same sequence - cannot add/drop serialness with ALTER TABLE - dropping default does not drop sequence - need to grant separate privileges to sequence - other slight weirdnesses because serial is some kind of special macro Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>	9 years ago
Andres Freund	b8d7f053c5	Faster expression evaluation and targetlist projection. ... This replaces the old, recursive tree-walk based evaluation, with non-recursive, opcode dispatch based, expression evaluation. Projection is now implemented as part of expression evaluation. This both leads to significant performance improvements, and makes future just-in-time compilation of expressions easier. The speed gains primarily come from: - non-recursive implementation reduces stack usage / overhead - simple sub-expressions are implemented with a single jump, without function calls - sharing some state between different sub-expressions - reduced amount of indirect/hard to predict memory accesses by laying out operation metadata sequentially; including the avoidance of nearly all of the previously used linked lists - more code has been moved to expression initialization, avoiding constant re-checks at evaluation time Future just-in-time compilation (JIT) has become easier, as demonstrated by released patches intended to be merged in a later release, for primarily two reasons: Firstly, due to a stricter split between expression initialization and evaluation, less code has to be handled by the JIT. Secondly, due to the non-recursive nature of the generated "instructions", less performance-critical code-paths can easily be shared between interpreted and compiled evaluation. The new framework allows for significant future optimizations. E.g.: - basic infrastructure for to later reduce the per executor-startup overhead of expression evaluation, by caching state in prepared statements. That'd be helpful in OLTPish scenarios where initialization overhead is measurable. - optimizing the generated "code". A number of proposals for potential work has already been made. - optimizing the interpreter. Similarly a number of proposals have been made here too. The move of logic into the expression initialization step leads to some backward-incompatible changes: - Function permission checks are now done during expression initialization, whereas previously they were done during execution. In edge cases this can lead to errors being raised that previously wouldn't have been, e.g. a NULL array being coerced to a different array type previously didn't perform checks. - The set of domain constraints to be checked, is now evaluated once during expression initialization, previously it was re-built every time a domain check was evaluated. For normal queries this doesn't change much, but e.g. for plpgsql functions, which caches ExprStates, the old set could stick around longer. The behavior around might still change. Author: Andres Freund, with significant changes by Tom Lane, changes by Heikki Linnakangas Reviewed-By: Tom Lane, Heikki Linnakangas Discussion: https://postgr.es/m/20161206034955.bh33paeralxbtluv@alap3.anarazel.de	9 years ago