ecpglib. Instead of parsing the statement just as ask the database server. This
patch removes the whole client side track keeping of the current transaction
status.
to see if a particular privilege has been granted to PUBLIC.
The issue was reported by Jim Nasby.
Patch by Alvaro Herrera, and reviewed by KaiGai Kohei.
We may as well make pgstat_count_heap_scan() and related macros just count
whenever rel->pgstat_info isn't null. Testing pgstat_track_counts buys
nothing at all in the normal case where that flag is ON; and when it's OFF,
the pgstat_info link will be null, so it's still a useless test.
This change is unlikely to buy any noticeable performance improvement,
but a cycle shaved is a cycle earned; and my investigations earlier today
convinced me that we're down to the point where individual instructions in
the inner execution loops are starting to matter.
The original coding was quite sloppy about handling the case where
XLogReadBuffer fails (because the page has since been deleted). This
would result in either "bad buffer id: 0" or an Assert failure during
replay, if indeed the page were no longer there. In a couple of places
it also neglected to check whether the change had already been applied,
which would probably result in corrupted index contents. I believe that
bug #5703 is an instance of the first problem. These issues could show up
without replication, but only if you were unfortunate enough to crash
between modification of a GIN index and the next checkpoint.
Back-patch to 8.2, which is as far back as GIN has WAL support.
This patch merges the responsibility for NOT-flattening into
eval_const_expressions' processing. It wasn't done that way originally
because prepqual.c is far older than eval_const_expressions. But putting
this work into eval_const_expressions saves one pass over the qual trees,
and in fact saves even more than that because we can exploit the knowledge
that the subexpressions have already been recursively simplified. Doing it
this way also lets us do it uniformly over all expressions, whereas
prepqual.c formerly just did it at top level to save cycles. That should
improve the planner's ability to recognize logically-equivalent constructs.
While at it, also add the ability to fold a NOT into BooleanTest and
NullTest constructs (the latter only for the scalar-datatype case).
Per discussion of bug #5702.
Completion is supported in the context of \set and when interpolating
a variable value using :foo etc.
In passing, fix some places in tab-complete.c that weren't following
project style for comment formatting.
Pavel Stehule, reviewed by Itagaki Takahiro
This patch adds the SQL-standard concept of an INSTEAD OF trigger, which
is fired instead of performing a physical insert/update/delete. The
trigger function is passed the entire old and/or new rows of the view,
and must figure out what to do to the underlying tables to implement
the update. So this feature can be used to implement updatable views
using trigger programming style rather than rule hacking.
In passing, this patch corrects the names of some columns in the
information_schema.triggers view. It seems the SQL committee renamed
them somewhere between SQL:99 and SQL:2003.
Dean Rasheed, reviewed by Bernd Helmle; some additional hacking by me.
Various places were testing TRIGGER_FIRED_BEFORE() where what they really
meant was !TRIGGER_FIRED_AFTER(), or vice versa. This needs to be cleaned
up because there are about to be more than two possible states.
We might want to note this in the 9.1 release notes as something for
trigger authors to double-check.
For consistency's sake I also changed some places that assumed that
TRIGGER_FIRED_FOR_ROW and TRIGGER_FIRED_FOR_STATEMENT are necessarily
mutually exclusive; that's not in immediate danger of breaking, but
it's still sloppier than it should be.
Extracted from Dean Rasheed's patch for triggers on views. I'm committing
this separately since it's an identifiable separate issue, and is the
only reason for the patch to touch most of these particular files.
This patch resurrects some of the information that could be logged by the
old, now-dead implementation of VACUUM FULL, in particular counts of live
and dead tuples and the time taken for the table rebuild proper. There's
still no logging about the ensuing index rebuilds, though.
Itagaki Takahiro
Use a macro LogicalTapeReadExact() to encapsulate the error check when
we want to read an exact number of bytes from a "tape". Per a suggestion
of Takahiro Itagaki.
This patch eliminates per-chunk palloc overhead for most small allocations
needed in the representation of an ispell dictionary. This saves close to
a factor of 2 on the current Czech ispell data. While it doesn't cover
every last small allocation in the ispell code, we are at the point of
diminishing returns, because about 95% of the allocations are covered
already.
Pavel Stehule, rather heavily revised by Tom
Add explicit initialization and cleanup functions to spell.c, and keep
all working state in the already-existing ISpellDict struct. This lets us
get rid of a static variable along with some extremely shaky assumptions
about usage of child memory contexts.
This commit is just code beautification and has no impact on functionality
or performance, but it opens the way to a less-grotty implementation of
Pavel's memory-saving hack, which will follow shortly.
In versions 8.2 and up, the grammar allows attaching ORDER BY, LIMIT,
FOR UPDATE, or WITH to VALUES, and hence to INSERT ... VALUES. But the
special-case code for VALUES in transformInsertStmt() wasn't expecting any
of those, and just ignored them, leading to unexpected results. Rather
than complicate the special-case path, just ensure that the presence of any
of those clauses makes us treat the query as if it had a general SELECT.
Per report from Hitoshi Harada.
Actually making this case work, if the column is used in the trigger's
WHEN condition, will take some new code that probably isn't appropriate
to back-patch. For now, just throw a FEATURE_NOT_SUPPORTED error rather
than allowing control to reach the "unexpected object" case. Per bug #5688
from Daniel Grace. Back-patch to 9.0 where the possibility of such a
dependency was introduced.
There are numerous methods by which a Perl or Tcl function can subvert
the behavior of another such function executed later; for example, by
redefining standard functions or operators called by the target function.
If the target function is SECURITY DEFINER, or is called by such a
function, this means that any ordinary SQL user with Perl or Tcl language
usage rights can do essentially anything with the privileges of the target
function's owner.
To close this security hole, create a separate Perl or Tcl interpreter for
each SQL userid under which plperl or pltcl functions are executed within
a session. However, all plperlu or pltclu functions run within a session
still share a single interpreter, since they all execute at the trust
level of a database superuser anyway.
Note: this change results in a functionality loss when libperl has been
built without the "multiplicity" option: it's no longer possible to call
plperl functions under different userids in one session, since such a
libperl can't support multiple interpreters in one process. However, such
a libperl already failed to support concurrent use of plperl and plperlu,
so it's likely that few people use such versions with Postgres.
Security: CVE-2010-3433
The point of a PlaceHolderVar is to allow a non-strict expression to be
evaluated below an outer join, after which its value bubbles up like a Var
and can be forced to NULL when the outer join's semantics require that.
However, there was a serious design oversight in that, namely that we
didn't ensure that there was actually a correct place in the plan tree
to evaluate the placeholder :-(. It may be necessary to delay evaluation
of an outer join to ensure that a placeholder that should be evaluated
below the join can be evaluated there. Per recent bug report from Kirill
Simonov.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
1. Resurrect the behavior where old commits on master will have Branch:
labels for branches sprouted after the commit was made. I'm still
dubious about this mode, but if you want it, say --post-date or -p.
2. Annotate the Branch: labels with the release or branch in which the
commit was publicly released. For example, on a release branch you could
see
Branch: REL8_3_STABLE Release: REL8_3_2 [92c3a8004] 2008-03-29 00:15:37 +0000
showing that the fix was released in 8.3.2. Commits on master will
usually instead have notes like
Branch: master Release: REL8_4_BR [6fc9d4272] 2008-03-29 00:15:28 +0000
showing that this commit is ancestral to release branches 8.4 and later.
If no Release: marker appears, the commit hasn't yet made it into any
release.
3. Add support for release branches older than 7.4.
4. The implementation is improved by running git log on each branch only
back to where the branch sprouts from master. This saves a good deal
of time (about 50% of the runtime when generating the complete history).
We generate the post-date-mode tags via a direct understanding that
they should be applied to master commits made before the branch sprouted,
rather than backing into them via matching (which isn't any too
reliable when people used identical log messages for successive commits).
1. Don't assume there's only one candidate match; check them all and use the
one with the closest timestamp. Avoids funny output when someone makes
several successive commits with the same log message, as certain people
have been known to do.
2. When the same commit (with the same SHA1) is reachable from multiple
branch tips, don't report it for all the branches; instead report it only
for the first such branch. Given our development practices, this case
arises only for commits that occurred before a given branch split off from
master. The original coding blamed old commits on *all* the branches,
which isn't terribly useful; the new coding blames such a commit only on
master.
1. Don't forget the last (oldest) commit on the oldest branch.
2. When considering which commit to print next, if two alternatives have
the same "distortion" score (which is actually the normal case, since
generally the "distortion" is 0), then choose the later timestamp to
print first. I don't know where Robert got the idea to ignore timestamps
and sort by branch age, but it wasn't a good idea: the resulting ordering
of commits was just plain bizarre anywhere that some branches had many
fewer commits than others, which is the typical situation for us.
Avoid depending on Date::Calc, which isn't in a basic Perl installation,
when we can equally well use Time::Local which is. Also fix the parsing
of timestamps to take heed of the timezone. (It looks like cvs2git emitted
all commit timestamps with zone GMT, so this refinement might've looked
unnecessary when looking at converted data; but it's needed now.)
Fix parsing of message bodies so that blank lines that may or may not get
emitted by "git log" aren't confused with real data. This avoids strange
formatting of the oldest commit on a branch.
Check child-process exit status, so that we actually notice if "git log"
fails, and so that we don't accumulate zombie children.
The previous coding would decide that join removal was unsafe upon finding
a PlaceHolderVar that needed to be evaluated at the inner rel and then used
above the join. However, this fails to cover the case of PlaceHolderVars
that refer to both the inner rel and some other rels. Per bug report from
Andrus.
hasn't been set.
The only known case where this can happen is when show_session_authorization
is invoked in an autovacuum process, which is possible if an index function
calls it, as for example in bug #5669 from Andrew Geery. We could perhaps
try to return a sensible value, such as the name of the cluster-owning
superuser; but that seems like much more trouble than the case is worth,
and in any case it could create new possible failure modes. Simply
returning an empty string seems like the most appropriate fix.
Back-patch to all supported versions, even those before autovacuum, just
in case there's another way to provoke this crash.
In some situations the original coding led to corrupting the child AppendRel's
subpaths list, effectively adding other members of the parent's list to it.
This was usually masked because we never made any further use of the child's
list, but given the right combination of circumstances, we could do so. The
visible symptom would be a relation getting scanned twice, as in bug #5673
from David Schmitt.
Backpatch to 8.2, which is as far back as the risky coding appears. The
example submitted by David only fails in 8.4 and later, but I'm not convinced
that there aren't any even-more-obscure cases where 8.2 and 8.3 would fail.
We can't actually print the parent RelOptInfo in toto, because that would
lead to infinite recursion. But it's safe enough to reach into the parent
and print its identifying relids, and that makes it a whole lot easier
to figure out what a Path represents. Should have done this years ago.
servers. AFAICT it's harmless at the moment because nothing can depend on
either, but as soon as we introduce an object type with such dependencies,
tableoid needs to be set or pg_dump will fail to interpret the dependencies
correctly. In theory, I guess the uninitialized garbage in tableoid could
cause the object to be mistaken for some other object with same OID as well.
This was unintentionally broken in 8.4 while tightening up checking of
ordinary non-Julian date inputs to forbid references to "year zero".
Per bug #5672 from Benjamin Gigot.
The previous patches failed to cover a lot of symlinks that are only
added in platform-specific cases. Make the lists match what's in the
Makefile for each branch.
Simon Riggs