Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
values being complained of.
In passing, also remove the arbitrary length limitation in the similar
error detail message for foreign key violations.
Itagaki Takahiro
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
algorithm, replacing the original intention of a one-pass search, which
had been hacked up over time to be partially two-pass in hopes of handling
various corner cases better. It still wasn't quite there, especially as
regards emitting unwanted NOTICE messages. More importantly, this approach
lets us fix a number of open bugs concerning concurrent DROP scenarios,
because we can take locks during the first pass and avoid traversing to
dependent objects that were just deleted by someone else.
There is more that can be done here, but I'll go ahead and commit the
base patch before working on the options.
instead of plan time. Extend the amgettuple API so that the index AM returns
a boolean indicating whether the indexquals need to be rechecked, and make
that rechecking happen in nodeIndexscan.c (currently the only place where
it's expected to be needed; other callers of index_getnext are just erroring
out for now). For the moment, GIN and GIST have stub logic that just always
sets the recheck flag to TRUE --- I'm hoping to get Teodor to handle pushing
that control down to the opclass consistent() functions. The planner no
longer pays any attention to amopreqcheck, and that catalog column will go
away in due course.
systable_endscan_ordered that have API similar to systable_beginscan etc
(in particular, the passed-in scankeys have heap not index attnums),
but guarantee ordered output, unlike the existing functions. For the moment
these are just very thin wrappers around index_beginscan/index_getnext/etc.
Someday they might need to get smarter; but for now this is just a code
refactoring exercise to reduce the number of direct callers of index_getnext,
in preparation for changing that function's API.
In passing, remove index_getnext_indexitem, which has been dead code for
quite some time, and will have even less use than that in the presence
of run-time-lossy indexes.
indexscan always occurs in one call, and the results are returned in a
TIDBitmap instead of a limited-size array of TIDs. This should improve
speed a little by reducing AM entry/exit overhead, and it is necessary
infrastructure if we are ever to support bitmap indexes.
In an only slightly related change, add support for TIDBitmaps to preserve
(somewhat lossily) the knowledge that particular TIDs reported by an index
need to have their quals rechecked when the heap is visited. This facility
is not really used yet; we'll need to extend the forced-recheck feature to
plain indexscans before it's useful, and that hasn't been coded yet.
The intent is to use it to clean up 8.3's horrid @@@ kluge for text search
with weighted queries. There might be other uses in future, but that one
alone is sufficient reason.
Heikki Linnakangas, with some adjustments by me.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
currentMarkData from IndexScanDesc to the opaque structs for the
AMs that need this information (currently gist and hash).
Patch from Heikki Linnakangas, fixes by Neil Conway.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
btgettuple and btgetmulti). This eliminates the problem of "re-finding" the
exact stopping point, since the stopping point is effectively always a page
boundary, and index items are never moved across pre-existing page boundaries.
A small penalty is that the keys_are_unique optimization is effectively
disabled (and, therefore, is removed in this patch), causing us to apply
_bt_checkkeys() to at least one more tuple than necessary when looking up a
unique key. However, the advantages for non-unique cases seem great enough to
accept this tradeoff. Aside from simplifying and (sometimes) speeding up the
indexscan code, this will allow us to reimplement btbulkdelete as a largely
sequential scan instead of index-order traversal, thereby significantly
reducing the cost of VACUUM. Those changes will come in a separate patch.
Original patch by Heikki Linnakangas, rework by Tom Lane.
if we already have a stronger lock due to the index's table being the
update target table of the query. Same optimization I applied earlier
at the table level. There doesn't seem to be much interest in the more
radical idea of not locking indexes at all, so do what we can ...
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
routines in the index's relcache entry, instead of doing a fresh fmgr_info
on every index access. We were already doing this for the index's opclass
support functions; not sure why we didn't think to do it for the AM
functions too. This supersedes the former method of caching (only)
amgettuple in indexscan scan descriptors; it's an improvement because the
function lookup can be amortized across multiple statements instead of
being repeated for each statement. Even though lookup for builtin
functions is pretty cheap, this seems to drop a percent or two off some
simple benchmarks.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
the index AM when we know we are fetching a unique row. However, this
logic did not consider the possibility that it would be asked to fetch
backwards. Also fix mark/restore to work correctly in this scenario.
transaction, so as to avoid returning them out of the index AM. Saves
repeated heap_fetch operations on frequently-updated rows. Also detect
queries on unique keys (equality to all columns of a unique index), and
don't bother continuing scan once we have found first match.
Killing is implemented in the btree and hash AMs, but not yet in rtree
or gist, because there isn't an equally convenient place to do it in
those AMs (the outer amgetnext routine can't do it without re-pinning
the index page).
Did some small cleanup on APIs of HeapTupleSatisfies, heap_fetch, and
index_insert to make this a little easier.
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
Improve 'pg_internal.init' relcache entry preload mechanism so that it is
safe to use for all system catalogs, and arrange to preload a realistic
set of system-catalog entries instead of only the three nailed-in-cache
indexes that were formerly loaded this way. Fix mechanism for deleting
out-of-date pg_internal.init files: this must be synchronized with transaction
commit, not just done at random times within transactions. Drive it off
relcache invalidation mechanism so that no special-case tests are needed.
Cache additional information in relcache entries for indexes (their pg_index
tuples and index-operator OIDs) to eliminate repeated lookups. Also cache
index opclass info at the per-opclass level to avoid repeated lookups during
relcache load.
Generalize 'systable scan' utilities originally developed by Hiroshi,
move them into genam.c, use in a number of places where there was formerly
ugly code for choosing either heap or index scan. In particular this allows
simplification of the logic that prevents infinite recursion between syscache
and relcache during startup: we can easily switch to heapscans in relcache.c
when and where needed to avoid recursion, so IndexScanOK becomes simpler and
does not need any expensive initialization.
Eliminate useless opening of a heapscan data structure while doing an indexscan
(this saves an mdnblocks call and thus at least one kernel call).
Simon Riggs