There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
This function supports untranslated detail messages, in the same way that
errmsg_internal supports untranslated primary messages. We've needed this
for some time IMO, but discussion of some cases in the SSI code provided
the impetus to actually add it.
Kevin Grittner, with minor adjustments by me
This fixes SSPI login failures showing "The function
requested is not supported", often showing up when connecting
to localhost. The reason was not properly updating the SSPI
handle when multiple roundtrips were required to complete the
authentication sequence.
Report and analysis by Ahmed Shinwari, patch by Magnus Hagander
First, when following a right-link, we incorrectly marked the current page
as the parent of the right sibling. In reality, the parent of the right page
is the same as the parent of the current page (or some page to the right of
it, gistFindCorrectParent() will sort that out).
Secondly, when we follow a right-link, we must prepend, not append, the right
page to our list of pages to visit. That's because we assume that once we
hit a leaf page in the list, all the rest are leaf pages too, and give up.
To hit these bugs, you need concurrent actions and several unlucky accidents.
Another backend must split the root page, while you're in process of
splitting a lower-level page. Furthermore, while you scan the internal nodes
to re-find the parent, another backend needs to again split some more internal
pages. Even then, the bugs don't necessarily manifest as user-visible errors
or index corruption.
While we're at it, make the error reporting a bit better if gistFindPath()
fails to re-find the parent. It used to be an assertion, but an elog() seems
more appropriate.
Backpatch to all supported branches.
There's a heuristic in estimate_rel_size() to clamp the minimum size
estimate for a table to 10 pages, unless we can see that vacuum or analyze
has been run (and set relpages to something nonzero, so this will always
happen for a table that's actually empty). However, it would be better
not to do this for inheritance parent tables, which very commonly are
really empty and can be expected to stay that way. Per discussion of a
recent pgsql-performance report from Anish Kejariwal. Also prevent it
from happening for indexes (although this is more in the nature of
documentation, since CREATE INDEX normally initializes relpages to
something nonzero anyway).
Back-patch to 9.0, because the ability to collect statistics across a
whole inheritance tree has improved the planner's estimates to the point
where this relatively small error makes a significant difference. In the
referenced report, merge or hash joins were incorrectly estimated as
cheaper than a nestloop with inner indexscan on the inherited table.
That was less likely before 9.0 because the lack of inherited stats would
have resulted in a default (and rather pessimistic) estimate of the cost
of a merge or hash join.
Regular aggregate functions in combination with, or within the arguments
of, window functions are OK per spec; they have the semantics that the
aggregate output rows are computed and then we run the window functions
over that row set. (Thus, this combination is not really useful unless
there's a GROUP BY so that more than one aggregate output row is possible.)
The case without GROUP BY could fail, as recently reported by Jeff Davis,
because sloppy construction of the Agg node's targetlist resulted in extra
references to possibly-ungrouped Vars appearing outside the aggregate
function calls themselves. See the added regression test case for an
example.
Fixing this requires modifying the API of flatten_tlist and its underlying
function pull_var_clause. I chose to make pull_var_clause's API for
aggregates identical to what it was already doing for placeholders, since
the useful behaviors turn out to be the same (error, report node as-is, or
recurse into it). I also tightened the error checking in this area a bit:
if it was ever valid to see an uplevel Var, Aggref, or PlaceHolderVar here,
that was a long time ago, so complain instead of ignoring them.
Backpatch into 9.1. The failure exists in 8.4 and 9.0 as well, but seeing
that it only occurs in a basically-useless corner case, it doesn't seem
worth the risks of changing a function API in a minor release. There might
be third-party code using pull_var_clause.
We were using GetConfigOption to collect the old value of each setting,
overlooking the possibility that it didn't exist yet. This does happen
in the case of adding a new entry within a custom variable class, as
exhibited in bug #6097 from Maxim Boguk.
To fix, add a missing_ok parameter to GetConfigOption, but only in 9.1
and HEAD --- it seems possible that some third-party code is using that
function, so changing its API in a minor release would cause problems.
In 9.0, create a near-duplicate function instead.
In the example for decode(), show the bytea result in hex format,
since that's now the default. Use an E'' string in the example for
quote_literal(), so that it works regardless of the
standard_conforming_strings setting. On the functions-for-binary-strings
page, leave the examples as-is for readability, but add a note pointing out
that they are shown in escape format. Per comments from Thom Brown.
Also, improve the description for encode() and decode() a tad.
Backpatch to 9.0, where bytea_output was introduced.
on the finished list, and we shouldn't flag it as a potential conflict
if so. We can also skip adding a doomed transaction to the list of
possible conflicts because we know it won't commit.
Dan Ports and Kevin Grittner.
transactions might not match the order the work done in those transactions
become visible to others. The logic in SSI, however, assumed that it does.
Fix that by having two sequence numbers for each serializable transaction,
one taken before a transaction becomes visible to others, and one after it.
This is easier than trying to make the the transition totally atomic, which
would require holding ProcArrayLock and SerializableXactHashLock at the same
time. By using prepareSeqNo instead of commitSeqNo in a few places where
commit sequence numbers are compared, we can make those comparisons err on
the safe side when we don't know for sure which committed first.
Per analysis by Kevin Grittner and Dan Ports, but this approach to fix it
is different from the original patch.
Per discussion, this structure seems more understandable than what was
there before. Make config.sgml and postgresql.conf.sample agree.
In passing do a bit of editorial work on the variable descriptions.
The value when BLCKSZ = 8192 is unchanged, but with larger-than-normal
block sizes we might need to crank things back a bit, as we'll have
more entries per page than normal in that case.
Kevin Grittner
If there's a dangerous structure T0 ---> T1 ---> T2, and T2 commits first,
we need to abort something. If T2 commits before both conflicts appear,
then it should be caught by OnConflict_CheckForSerializationFailure. If
both conflicts appear before T2 commits, it should be caught by
PreCommit_CheckForSerializationFailure. But that is actually run when
T2 *prepares*. Fix that in OnConflict_CheckForSerializationFailure, by
treating a prepared T2 as if it committed already.
This is mostly a problem for prepared transactions, which are in prepared
state for some time, but also for regular transactions because they also go
through the prepared state in the SSI code for a short moment when they're
committed.
Kevin Grittner and Dan Ports
get_op_btree_interpretation assumed this in order to save some duplication
of code, but it's not true in general anymore because we added <> support
to btree_gist. (We still assume it for btree opclasses, though.)
Also, essentially the same logic was baked into predtest.c. Get rid of
that duplication by generalizing get_op_btree_interpretation so that it
can be used by predtest.c.
Per bug report from Denis de Bernardy and investigation by Jeff Davis,
though I didn't use Jeff's patch exactly as-is.
Back-patch to 9.1; we do not support this usage before that.
This was already a runtime failure condition, but it's better to check
at validation time if possible. Lightly modified version of a patch
by Shigeru Hanada.
This is useful since a validator might want to require certain options
to be provided. The passed array is an empty text array in this case.
Per suggestion by Laurenz Albe, though this is not quite his patch.
As noted by Laurenz Albe, our SGML tools deal rather oddly with chapters
having just one <sect1>. Perhaps the tooling could be fixed, but really
the design of this chapter's introduction is pretty bogus anyhow. Split
it into a true introduction and a <sect1> about the FDW functions, so
that it reads better and dodges the lack-of-a-chapter-TOC problem.
handleCopyIn incremented pset.lineno for each line of COPY data read from
a file. This is correct when reading from the current script file (i.e.,
we are doing COPY FROM STDIN followed by in-line data), but it's wrong if
the data is coming from some other file. Per bug #6083 from Steve Haslam.
Back-patch to all supported versions.
Somehow, column rolconfig got removed from the documentation of the
pg_roles view in the 9.0 cycle, although the column is actually still
there. In 9.1, we'd also forgotten to document the rolreplication column.
Spotted by Sakamoto Masahiko.
Unlike the relistemp field which it replaced, relpersistence must be
set correctly quite early during the table creation process, as we
rely on it quite early on for a number of purposes, including security
checks. Normally, this is set based on whether the user enters CREATE
TABLE, CREATE UNLOGGED TABLE, or CREATE TEMPORARY TABLE, but a
relation may also be made implicitly temporary by creating it in
pg_temp. This patch fixes the handling of that case, and also
disables creation of unlogged tables in temporary tablespace (such
table indeed skip WAL-logging, but we reject an explicit
specification) and creation of relations in the temporary schemas of
other sessions (which is not very sensible, and didn't work right
anyway).
Report by Amit Khandekar.
Certain subdirectories do not get built if corresponding options are not
selected at configure time. However, "make distprep" should visit such
directories anyway, so that constructing derived files to be included in
the tarball happens without requiring all configure options to be given
in the tarball build script. Likewise, it's better if cleanup actions
unconditionally visit all directories (for example, this ensures proper
cleanup if someone has done a manual make in such a subdirectory).
To handle this, set up a convention that subdirectories that are
conditionally included in SUBDIRS should be added to ALWAYS_SUBDIRS
instead when they are excluded.
Back-patch to 9.1, so that plpython's spiexceptions.h will get provided
in 9.1 tarballs. There don't appear to be any instances where distprep
actions got missed in previous releases, and anyway this fix requires
gmake 3.80 so we don't want to apply it before 9.1.
Such a condition is unsatisfiable in combination with any other type of
btree-indexable condition (since we assume btree operators are always
strict). 8.3 and 8.4 had an explicit test for this, which I removed in
commit 29c4ad9829, mistakenly thinking that
the case would be subsumed by the more general handling of IS (NOT) NULL
added in that patch. Put it back, and improve the comments about it, and
add a regression test case.
Per bug #6079 from Renat Nasyrov, and analysis by Dean Rasheed.
Michael Meskes