Make _bt_readpage pass down the current scan direction to various
utility functions within its pstate variable. Also have _bt_readpage
work off of a local copy of scan->ignore_killed_tuples within its
per-tuple loop (rather than using scan->ignore_killed_tuples directly).
Testing has shown that this significantly benefits large range scans,
which are naturally able to take full advantage of the pstate.startikey
optimization added by commit 8a510275. Running a pgbench script with a
"SELECT abalance FROM pgbench_accounts WHERE aid BETWEEN ..." query
shows an increase in transaction throughput of over 5%. There also
appears to be a small performance benefit when running pgbench's
built-in select-only script.
Follow-up to commit 65d6acbc.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzmwMwcwKFgaf+mYPwiz3iL4AqpXnwtW_O0vqpWPXRom9Q@mail.gmail.com
Quite a bit of code within nbtutils.c is only called by _bt_readpage.
Move _bt_readpage and all of the nbtutils.c functions it depends on into
a new .c file, nbtreadpage.c. Also reorder some of the functions within
the new file for clarity.
This commit has no functional impact. It is strictly mechanical.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzmwMwcwKFgaf+mYPwiz3iL4AqpXnwtW_O0vqpWPXRom9Q@mail.gmail.com
Currently, we use special values that are otherwise invalid for each
option to indicate "option was not given". Replace that with separate
boolean variables for each option. It seems more clear to be explicit.
We were already doing that for the -m option, because there were no
invalid values for nextMulti that we could use (since commit
94939c5f3a).
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/81adf5f3-36ad-4bcd-9ba5-1b95c7b7a807@iki.fi
The strtoul() function that we used to parse many of the options
accepts negative values, and silently wraps them to the equivalent
unsigned values. For example, -1 becomes 0xFFFFFFFF, on platforms
where unsigned long is 32 bits wide. Also, on platforms where
"unsigned long" is 64 bits wide, we silently casted values larger than
UINT32_MAX to the equivalent 32-bit value. Both of those behaviors
seem undesirable, so tighten up the parsing to reject them.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/81adf5f3-36ad-4bcd-9ba5-1b95c7b7a807@iki.fi
When parse.pl processes braces, it does not take into account that
braces could also be their own token if single quoted ('{', '}').
This is not currently used but a future patch wants to make use of it.
This fixes that by using lookaround assertions to detect the quotes.
To make sure all Perl versions in play support this and to avoid
surprises later on, let's give this a spin on the buildfarm now. It
can exist independently of future work.
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a855795d-e697-4fa5-8698-d20122126567@eisentraut.org
The code in BootStrapXLOG() and in pg_test_fsync.c tried to align WAL
buffers in complicated ways. Also, they still used XLOG_BLCKSZ for
the alignment, even though that should now be PG_IO_ALIGN_SIZE. This
can now be simplified and made more consistent by using
PGAlignedXLogBlock, either directly in BootStrapXLOG() and using
alignas in pg_test_fsync.c.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f462a175-b608-44a1-b428-bdf351e914f4%40eisentraut.org
This test module acts as a replacement that existed prior to
d52c24b0f8 in the test module injection_points. It uses a more
flexible structure than its ancestor:
- Two libraries are built, one for fixed-sized stats and one for
variable-sized stats.
- No GUCs required. The stats are enabled only if one or both libraries
are loaded with shared_preload_libraries.
- Same kind IDs reserved: 25 (variable-sized) and 26 (fixed-sized)
The goal of this redesign is to be able to easier extend the code
coverage provided by this module for other changes that are currently
under discussion, and injection_points was not suited for these.
Injection points are also now widely used in the tree now, so extending
more the test coverage for custom pgstats in the test module
injection_points would be a riskier long-term move.
The new code is mostly a copy of what existed previously in the test
module injection_points, with the same callbacks defined for fixed-sized
and variable-sized stats, but a simpler overall structure in terms of
the stats counters updated.
The test coverage should remain the same as previously: one TAP test is
used to check data reports, crash recovery and clean restart scenarios.
Tests are added for the manual reset of fixed-sized stats, something
not tested until now.
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAA5RZ0sJgO6GAwgFxmzg9MVP=rM7Us8KKcWpuqxe-f5qxmpE0g@mail.gmail.com
A race condition could cause a newly created replication slot to become
invalidated between WAL reservation and a checkpoint.
Previously, if the required WAL was removed, we retried the reservation
process. However, the slot could still be invalidated before the retry if
the WAL was not yet removed but the checkpoint advanced the redo pointer
beyond the slot's intended restart LSN and computed the minimum LSN that
needs to be preserved for the slots.
The fix is to acquire an exclusive lock on ReplicationSlotAllocationLock
during WAL reservation to serialize WAL reservation and checkpoint's
minimum restart_lsn computation. This ensures that, if WAL reservation
occurs first, the checkpoint waits until restart_lsn is updated before
removing WAL. If the checkpoint runs first, subsequent WAL reservations
pick a position at or after the latest checkpoint's redo pointer.
We can't use the same fix for branch 17 and prior because commit
2090edc6f3 changed to compute to the minimum restart_LSN among slot's at
the beginning of checkpoint (or restart point). The fix for 17 and prior
branches is under discussion and will be committed separately.
Reported-by: suyu.cmj <mengjuan.cmj@alibaba-inc.com>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Vitaly Davydov <v.davydov@postgrespro.ru>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 18
Discussion: https://postgr.es/m/5e045179-236f-4f8f-84f1-0f2566ba784c.mengjuan.cmj@alibaba-inc.com
The test module injection_points has been used as a landing spot to
provide coverage for the custom pgstats APIs, for both fixed-sized and
variable-sized stats kinds. Some recent work related to pgstats is
proving that this structure makes the implementation of new tests
harder.
This commit removes the code related to pgstats from injection_points,
and an equivalent will be reintroduced as a separate test module in a
follow-up commit. This removal is done in its own commit for clarity.
Using injection_points for this test coverage was perhaps not the best
way to design things, but this was good enough while working on the
first flavor of the custom pgstats APIs. Using a new test module will
make easier the introduction of new tests, and we will not need to worry
about the impact of new changes related to custom pgstats could have
with the internals of injection_points.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0sJgO6GAwgFxmzg9MVP=rM7Us8KKcWpuqxe-f5qxmpE0g@mail.gmail.com
The error details updated in this commit can be reached in the
regression tests. They did not follow the project style, and they
should be written them as full sentences.
Some of the errors are switched to use an elog(), for cases that involve
paths that cannot be reached based on the previous state of the parser
processing the input data (array start, object end, etc.). The error
messages for these cases use now a more consistent style across the
board, with the state of the parser reported for debugging.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/1353179.1764901790@sss.pgh.pa.us
find_variable() and its subroutines transiently scribble on the
passed-in "name" string, even though we've declared that "const".
The string is in fact temporary, so this is not very harmful,
but it's confusing and will produce compiler warnings with
late-model gcc. Rearrange the code so that instead of modifying
the given string, we make temporary copies of the parts that we
need separated out. (I used loc_alloc so that the copies are
short-lived and don't need to be freed explicitly.)
This code is poorly structured and confusing, to the point where
my first attempt to fix it was wrong. It is also under-tested,
allowing the broken v1 patch to nonetheless pass regression.
I'll restrain myself from rewriting it completely, and just add
some comments and more test cases.
We will probably want to back-patch this once gcc 15.2 becomes
more widespread, but for now just put it in master.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1324889.1764886170@sss.pgh.pa.us
The general case for converting to a JSONB numeric value is to run the
source datatype's output function and then numeric_in, but we can do
substantially better than that for integer and numeric source values.
This patch improves the speed of jsonb_agg by 30% for integer input,
and nearly 2X for numeric input.
Sadly, the obvious idea of using float4_numeric and float8_numeric
to speed up those cases doesn't work: they are actually slower than
the generic coerce-via-I/O method, and not by a small amount.
They might round off differently than this code has historically done,
too. Leave that alone pending possible changes in those functions.
We can also do better than the existing code for text/varchar/bpchar
source data; this optimization is similar to one that already exists
in the json_agg() code. That saves 20% or so for such inputs.
Also make a couple of other minor improvements, such as not giving
JSONTYPE_CAST its own special case outside the switch when it could
perfectly well be handled inside, and not using dubious string hacking
to detect infinity and NaN results.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1060917.1753202222@sss.pgh.pa.us
The various variants of jsonb_agg() operate as follows,
for each aggregate input value:
1. Build a JsonbValue tree representation of the input value.
2. Flatten the JsonbValue tree into a Jsonb in on-disk format.
3. Iterate through the Jsonb, building a JsonbValue that is part
of the aggregate's state stored in aggcontext, but is otherwise
identical to what phase 1 built.
This is very slightly less silly than it sounds, because phase 1
involves calling non-JSONB code such as datatype output functions,
which are likely to leak memory, and we don't want to leak into the
aggcontext. Nonetheless, phases 2 and 3 are accomplishing exactly
nothing that is useful if we can make phase 1 put the JsonbValue
tree where we need it. We could probably do that with a bunch of
MemoryContextSwitchTo's, but what seems more robust is to give
pushJsonbValue the responsibility of building the JsonbValue tree
in a specified non-current memory context. The previous patch
created the infrastructure for that, and this patch simply makes
the aggregate functions use it and then rips out phases 2 and 3.
For me, this makes jsonb_agg() with a text column as input run
about 2X faster than before. It's not yet on par with json_agg(),
but this removes a whole lot of the difference.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1060917.1753202222@sss.pgh.pa.us
Instead of passing "JsonbParseState **" to pushJsonbValue(),
pass a pointer to a JsonbInState, which will contain the
parseState stack pointer as well as other useful fields.
Also, instead of returning a JsonbValue pointer that is often
meaningless/ignored, return the top-level JsonbValue pointer
in the "result" field of the JsonbInState.
This involves a lot of (mostly mechanical) edits, but I think
the results are notationally cleaner and easier to understand.
Certainly the business with sometimes capturing the result of
pushJsonbValue() and sometimes not was bug-prone and incapable of
mechanical verification. In the new arrangement, JsonbInState.result
remains null until we've completed a valid sequence of pushes, so
that an incorrect sequence will result in a null-pointer dereference,
not mistaken use of a partial result.
However, this isn't simply an exercise in prettier notation.
The real reason for doing it is to provide a mechanism whereby
pushJsonbValue() can be told to construct the JsonbValue tree
in a context that is not CurrentMemoryContext. That happens
when a non-null "outcontext" is specified in the JsonbInState.
No callers exercise that option in this patch, but the next
patch in the series will make use of it.
I tried to improve the comments in this area too.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1060917.1753202222@sss.pgh.pa.us
pg_type.typlen says 12 for the size of timetz, but sizeof(TimeTzADT)
will be 16 on most platforms due to alignment padding. Using the
sizeof number is no problem for usages such as palloc'ing a result
datum, but in usages such as datumCopy we really ought to match
what pg_type says. Add a macro TIMETZ_TYPLEN so that we have a
symbolic way to write that rather than hard-coding "12".
I cannot find any place where we've needed this so far, but an
upcoming patch requires it.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/2329959.1765047648@sss.pgh.pa.us
The SQL standard says that corr() and friends should return NULL in
the mathematically-undefined case where all the inputs in one of
the columns have the same value. We were checking that by seeing
if the sums Sxx and Syy were zero, but that approach is very
vulnerable to roundoff error: if a sum is close to zero but not
exactly that, we'd come out with a pretty silly non-NULL result.
Instead, directly track whether the inputs are all equal by
remembering the common value in each column. Once we detect
that a new input is different from before, represent that by
storing NaN for the common value. (An objection to this scheme
is that if the inputs are all NaN, we will consider that they
were not all equal. But under IEEE float arithmetic rules,
one NaN is never equal to another, so this behavior is arguably
correct. Moreover it matches what we did before in such cases.)
Then, leave the sums at their exact value of zero for as long
as we haven't detected different input values.
This solution requires the aggregate transition state to contain
8 float values not 6, which is not problematic, and it seems to add
less than 1% to the aggregates' runtime, which seems acceptable.
While we're here, improve corr()'s final function to cope with
overflow/underflow in the final calculation, and to clamp its
result to [-1, 1] in case of roundoff error.
Although this is arguably a bug fix, it requires a catversion bump
due to the change in aggregates' initial states, so it can't be
back-patched.
Patch written by me, but many of the ideas are due to Dean Rasheed,
who also did a deal of testing.
Bug: #19340
Reported-by: Oleg Ivanov <o15611@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Co-authored-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/19340-6fb9f6637f562092@postgresql.org
Previously, the 027_stream_regress test reported the full contents of
regression.diffs upon a test failure, when the standby and the primary
were still alive. If a test fails quite badly, the amount of
information reported can be really high, bloating the reports in the
buildfarm, the CI, or even local runs.
In most cases, we have noticed that having all this information is not
necessary when attempting to identify the source of a problem in this
test. This commit changes the situation by including the head and tail
of regression.diffs in the reports generated on failure rather than its
full contents, building upon b93f4e2f98 to optionally control the size
of the reports with the new environment variable
PG_TEST_FILE_READ_LINES.
This will perhaps require some more tuning, but the hope is to reduce
some of the buildfarm report bloat while making the information good
enough to deduce what is happening when something is going wrong, be it
in the buildfarm or some tests run in the CI, at least.
Suggested-by: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAN55FZ1D6KXvjSs7YGsDeadqCxNF3UUhjRAfforzzP0k-cE=bA@mail.gmail.com
This function reads the lines from a file and filters its contents to
report its head and tail contents. The amount of contents to read from
a file can be tuned by the environment variable PG_TEST_FILE_READ_LINES,
that can be used to override the default of 50 lines. If the file whose
content is read has less lines than two times PG_TEST_FILE_READ_LINES,
the whole file is returned.
This will be used in a follow-up commit to limit the amount of
information reported by some of the TAP tests on failure, where we have
noticed that the contents reported by the buildfarm can be heavily
bloated in some cases, with the head and tail contents of a report being
able to provide enough information to be useful for debugging.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAN55FZ1D6KXvjSs7YGsDeadqCxNF3UUhjRAfforzzP0k-cE=bA@mail.gmail.com
Due to an off-by-one error, the code failed to find matches at the
end of the haystack. Fix by rewriting the loop.
While at it, fix a comment that claimed that the function could find
a zero-length match. Such a match could send a caller into an endless
loop. However, zero-length matches only make sense with an empty
search string, and that case is explicitly excluded by all callers.
To make sure it stays that way, add an Assert and a comment.
Bug: #19341
Reported-by: Adam Warland <adam.warland@infor.com>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19341-1d9a22915edfec58@postgresql.org
Backpatch-through: 18
apply_scanjoin_target_to_paths wants to avoid useless work and
platform-specific dependencies by throwing away the path list created
prior to applying the final scan/join target and constructing a whole
new one using the final scan/join target. However, this is only valid
when we'll consider all the same strategies after the pathlist reset
as before.
After resetting the path list, we reconsider Append and MergeAppend
paths with the modified target list; therefore, it's only valid for a
partitioned relation. However, what the previous coding missed is that
it cannot be a partitioned join relation, because that also has paths
that are not Append or MergeAppend paths and will not be reconsidered.
Thus, before this patch, we'd sometimes choose a partitionwise strategy
with a higher total cost than cheapest non-partitionwise strategy,
which is not good.
We had a surprising number of tests cases that were relying on this
bug to work as they did. A big part of the reason for this is that row
counts in regression test cases tend to be low, which brings the cost
of partitionwise and non-partitionwise strategies very close together,
especially for merge joins, where the real and perceived advantages of
a partitionwise approach are minimal. In addition, one test case
included a row-count-inflating join. In such cases, a partitionwise
join can easily be a loser on cost, because the total number of tuples
passing through an Append node is much higher than it is with a
non-partitionwise strategy. That test case is adjusted by adding
additional join clauses to avoid the row count inflation.
Although the failure of the planner to choose the lowest-cost path is a
bug, we generally do not back-patch fixes of this type, because planning
is not an exact science and there is always a possibility that some user
will end up with a plan that has a lower estimated cost but actually
runs more slowly. Hence, no backpatch here, either.
The code change here is exactly what was originally proposed by
Ashutosh, but the changes to the comments and test cases have been
very heavily rewritten by me, helped along by some very useful advice
from Richard Guo.
Reported-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Author: Robert Haas <rhaas@postgresql.org>
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Reviewed-by: Arne Roland <arne.roland@malkut.net>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: http://postgr.es/m/CAExHW5toze58+jL-454J3ty11sqJyU13Sz5rJPQZDmASwZgWiA@mail.gmail.com
Newest versions of gcc are able to detect cases where code implicitly
casts away const by assigning the result of strchr() or a similar
function applied to a "const char *" value to a target variable
that's just "char *". This of course creates a hazard of not getting
a compiler warning about scribbling on a string one was not supposed
to, so fixing up such cases is good.
This patch fixes a dozen or so places where we were doing that.
Most are trivial additions of "const" to the target variable,
since no actually-hazardous change was occurring. There is one
place in ecpg.trailer where we were indeed violating the intention
of not modifying a string passed in as "const char *". I believe
that's harmless not a live bug, but let's fix it by copying the
string before modifying it.
There is a remaining trouble spot in ecpg/preproc/variable.c,
which requires more complex surgery. I've left that out of this
commit because I want to study that code a bit more first.
We probably will want to back-patch this once compilers that detect
this pattern get into wider circulation, but for now I'm just
going to apply it to master to see what the buildfarm says.
Thanks to Bertrand Drouvot for finding a couple more spots than
I had.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/1324889.1764886170@sss.pgh.pa.us
Corey Huinker has come up with a recipe that is more compact and more
pleasant to the eye for extended stats because we know that all of them
are 1-dimension JSON arrays. This commit switches the extended stats
tests to use replace() instead of jsonb_pretty(), splitting the data so
as one line is used for each item in the extended stats object.
This results in the removal of a good chunk of test output, that is now
easier to debug with one line used for each item in a stats object.
This patch has not been provided by Corey. This is some post-commit
cleanup work that I have noticed as good enough to do on its own while
reviewing the rest of the patch set Corey has posted.
Discussion: https://postgr.es/m/CADkLM=csMd52i39Ye8-PUUHyzBb3546eSCUTh-FBQ7bzT2uZ4Q@mail.gmail.com
Commit 76b78721ca introduced two new columns in pg_stat_replication_slots
to improve monitoring of slot synchronization. One of these columns was
named slotsync_skip_at, which is inconsistent with the naming convention
used for similar columns in other system views.
Columns that store timestamps of the most recent event typically use the
'last_' in the column name (e.g., last_autovacuum, checksum_last_failure).
Renaming slotsync_skip_at to slotsync_last_skip aligns with this pattern,
making the purpose of the column clearer and improving overall consistency
across the views.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Discussion: https://postgr.es/m/20251128091552.GB13635@p46.dedyn.io;lightning.p46.dedyn.io
Discussion: https://postgr.es/m/CAE9k0PkhfKrTEAsGz4DjOhEj1nQ+hbQVfvWUxNacD38ibW3a1g@mail.gmail.com
Some of the buildfarm members with some old gcc versions have been
complaining about an always-true test for a NULL pointer caused by a
combination of SOFT_ERROR_OCCURRED() and a local ErrorSaveContext
variable.
These warnings are taken care of by removing SOFT_ERROR_OCCURRED(),
switching to a direct variable check, like 56b1e88c80.
Oversights in e1405aa5e3 and 44eba8f06e.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1341064.1764895052@sss.pgh.pa.us
This commit adds the version information of a node initialized by
Cluster.pm, that may vary depending on the install_path given by the
test. The code was written so as the node information, that includes
the version number, was dumped before the version number was set.
This is particularly useful for the pg_upgrade TAP tests, that may mix
several versions for cross-version runs. The TAP infrastructure also
allows mixing nodes with different versions, so this information can be
useful for out-of-core tests.
Backpatch down to v15, where Cluster.pm and the pg_upgrade TAP tests
have been introduced.
Author: Potapov Alexander <a.potapov@postgrespro.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/e59bb-692c0a80-5-6f987180@170377126
Backpatch-through: 15
Adjust the prune_freeze_setup() parameter types of new_relfrozen_xid and
new_relmin_mxid to prevent misleading Coverity analysis.
heap_page_prune_and_freeze() compared these values against NULL when
passing them to prune_freeze_setup(), causing Coverity to assume they
could be NULL and flag a possible null-pointer dereference later, even
though it occurs inside a directly related conditional.
Reported-by: Coverity
Author: Melanie Plageman <melanieplageman@gmail.com>
The key is the first member of PrivateRefCountEntry, which has type
Buffer. This commit changes the key size from sizeof(int32) to
sizeof(Buffer). This appears to be an oversight in commit
4b4b680c3d, but it's of no consequence because Buffer has been a
signed 32-bit integer for a long time.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aS77DTpl0fOkIKSZ%40ip-10-97-1-34.eu-west-3.compute.internal
Currently, headerscheck and cpluspluscheck are very slow, and they
defeat use of ccache. This fixes that, and now they are much faster.
The problem was that the test files are created in a randomly-named
directory (`mktemp -d /tmp/$me.XXXXXX`), and this directory is
mentioned on the compiler command line, which is part of the cache
key.
The solution is to create the test files in the build directory. For
example, for src/include/storage/ipc.h, we generate
tmp_headerscheck_c/src_include_storage_ipc_h.c (or .cpp)
Now ccache works. (And it's also a bit easier to debug everything
with this naming.)
(The subdirectory is used to keep the cleanup trap simple.)
The observed speedup on Cirrus CI for headerscheck plus cpluspluscheck
is from about 1min 20s to only 20s. In local use, the speedups are
similar.
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/b49e74d4-3cf9-4d1c-9dce-09f75e55d026%40eisentraut.org
The assertion checking MyProcNumber used MaxBackends as the upper
bound, but the procInfos array is allocated with size
MaxBackends + NUM_AUXILIARY_PROCS. This inconsistency would cause
a false assertion failure if an auxiliary process calls WaitForLSN().
Author: Xuneng Zhou <xunengzhou@gmail.com>
In an upcoming patch more wait events will be added to the wait event
class (for buffer locking), making the current name too
specific. Alternatively we could introduce a dedicated wait event class for
those, but it seems somewhat confusing to have a BUFFERPIN and a BUFFER wait
event class.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
Commit 1eccb9315 added a test case that will cause a large number
of evaluations of a plpgsql function. With -DCLOBBER_CACHE_ALWAYS,
that takes an unreasonable amount of time (hours) because the
function's cache entries are repeatedly deleted and rebuilt.
That doesn't add any useful test coverage --- other test cases
already exercise plpgsql well enough --- and it's not part of what
this test intended to cover. We can get the same planner coverage,
if not more, by making the test directly invoke numeric_lt().
Reported-by: Tomas Vondra <tomas@vondra.me>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/baf1ae02-83bd-4f5d-872a-1d04f11a9073@vondra.me
With this commit, the next multixid's offset will always be set on the
offsets page, by the time that a backend might try to read it, so we
no longer need the waiting mechanism with the condition variable. In
other words, this eliminates "corner case 2" mentioned in the
comments.
The waiting mechanism was broken in a few scenarios:
- When nextMulti was advanced without WAL-logging the next
multixid. For example, if a later multixid was already assigned and
WAL-logged before the previous one was WAL-logged, and then the
server crashed. In that case the next offset would never be set in
the offsets SLRU, and a query trying to read it would get stuck
waiting for it. Same thing could happen if pg_resetwal was used to
forcibly advance nextMulti.
- In hot standby mode, a deadlock could happen where one backend waits
for the next multixid assignment record, but WAL replay is not
advancing because of a recovery conflict with the waiting backend.
The old TAP test used carefully placed injection points to exercise
the old waiting code, but now that the waiting code is gone, much of
the old test is no longer relevant. Rewrite the test to reproduce the
IPC/MultixactCreation hang after crash recovery instead, and to verify
that previously recorded multixids stay readable.
Backpatch to all supported versions. In back-branches, we still need
to be able to read WAL that was generated before this fix, so in the
back-branches this includes a hack to initialize the next offsets page
when replaying XLOG_MULTIXACT_CREATE_ID for the last multixid on a
page. On 'master', bump XLOG_PAGE_MAGIC instead to indicate that the
WAL is not compatible.
Author: Andrey Borodin <amborodin@acm.org>
Reviewed-by: Dmitry Yurichev <dsy.075@yandex.ru>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Ivan Bykov <i.bykov@modernsys.ru>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/172e5723-d65f-4eec-b512-14beacb326ce@yandex.ru
Backpatch-through: 14
These were removed in 5dee7a603f, but that was too optimistic, per
buildfarm member prion as reported by Tom Lane. Mea (Álvaro's) culpa.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Discussion: https://postgr.es/m/570630.1764737028@sss.pgh.pa.us
The comment for the Pointer type said 'XXX Pointer arithmetic is done
with this, so it can't be void * under "true" ANSI compilers.'. This
has been fixed in the previous commit 756a436893. This now changes
the definition of the type from char * to void *, as envisaged by that
comment.
Extension code that relies on using Pointer for pointer arithmetic
will need to make changes similar to commit 756a436893, but those
changes would be backward compatible.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://www.postgresql.org/message-id/4154950a-47ae-4223-bd01-1235cc50e933%40eisentraut.org
The comment for the Pointer type says 'XXX Pointer arithmetic is done
with this, so it can't be void * under "true" ANSI compilers.'. This
fixes that. Change from Pointer to use char * explicitly where
pointer arithmetic is needed. This makes the meaning of the code
clearer locally and removes a dependency on the actual definition of
the Pointer type. (The definition of the Pointer type is not changed
in this commit.)
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://www.postgresql.org/message-id/4154950a-47ae-4223-bd01-1235cc50e933%40eisentraut.org
Peter Geoghegan