Avoid calling contrib/amcheck functions with relations that are
unsuitable for checking. Specifically, don't attempt verification of
temporary relations, or indexes whose pg_index entry indicates that the
index is invalid, or not ready.
These relations are not supported by any of the contrib/amcheck
functions, for reasons that are pretty fundamental. For example, the
implementation of REINDEX CONCURRENTLY can add its own "transient"
pg_index entries, which has rather unclear implications for the B-Tree
verification functions, at least in the general case -- so they just
treat it as an error. It falls to the amcheck caller (in this case
pg_amcheck) to deal with the situation at a higher level.
pg_amcheck now simply treats these conditions as additional "visibility
concerns" when it queries system catalogs. This is a little arbitrary.
It seems to have the least problems among any of the available
alternatives.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Bug: #17212
Discussion: https://postgr.es/m/17212-34dd4a1d6bba98bf@postgresql.org
Backpatch: 14-, where pg_amcheck was introduced.
This operator wasn't formally documented anywhere. To give it
a natural home, relabel the functions-string-other table as
"Other String Functions and Operators", which is more parallel
to the functions-string-sql table anyway.
While here, add cross-references to the pattern match and text
search sections. It seems moderately likely that people would
come to this section looking for those (but I don't want to
actually list them in these tables).
Discussion: https://postgr.es/m/CADT4RqB13KQHOJqqQ+WXmYtJrukS2UiFdtfTvT-XA3qYLyB6Cw@mail.gmail.com
We currently have buildfarm members testing back to AIX 7.1,
but not before, and older AIX versions are long out of support
from IBM. So say that 7.1 is the oldest supported version.
Discussion: https://postgr.es/m/87y278s6iq.fsf@wibble.ilmari.org
Like BASE_BACKUP, CREATE_REPLICATION_SLOT has historically used a
hard-coded syntax. To improve future extensibility, adopt a flexible
options syntax here, too.
In the new syntax, instead of three mutually exclusive options
EXPORT_SNAPSHOT, USE_SNAPSHOT, and NOEXPORT_SNAPSHOT, there is now a single
SNAPSHOT option with three possible values: 'export', 'use', and 'nothing'.
This commit does not remove support for the old syntax. It just adds
the new one as an additional option, makes pg_receivewal,
pg_recvlogical, and walreceiver processes use it.
Patch by me, reviewed by Fabien Coelho, Sergei Kornilov, and
Fujii Masao.
Discussion: http://postgr.es/m/CA+TgmobAczXDRO_Gr2euo_TxgzaH1JxbNxvFx=HYvBinefNH8Q@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Previously, BASE_BACKUP used an entirely hard-coded syntax, but that's
hard to extend. Instead, adopt the same kind of syntax we've used for
SQL commands such as VACUUM, ANALYZE, COPY, and EXPLAIN, where it's
not necessary for all of the option names to be parser keywords.
In the new syntax, most of the options now take an optional Boolean
argument. To match our practice in other in places, the options which
the old syntax called NOWAIT and NOVERIFY_CHECKSUMS options are in the
new syntax called WAIT and VERIFY_CHECKUMS, and the default value is
false. In the new syntax, the FAST option has been replaced by a
CHECKSUM option whose value may be 'fast' or 'spread'.
This commit does not remove support for the old syntax. It just adds
the new one as an additional option, and makes pg_basebackup prefer
the new syntax when the server is new enough to support it.
Patch by me, reviewed and tested by Fabien Coelho, Sergei Kornilov,
Fujii Masao, and Tushar Ahuja.
Discussion: http://postgr.es/m/CA+TgmobAczXDRO_Gr2euo_TxgzaH1JxbNxvFx=HYvBinefNH8Q@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
queries.sgml failed to mention the rather important point that
INTERSECT binds more tightly than UNION or EXCEPT. I thought
it could also use more discussion of the role of parentheses
in these constructs.
Per gripe from Christopher Painter-Wakefield.
Discussion: https://postgr.es/m/163338891727.12510.3939775743980651160@wrigleys.postgresql.org
Previously both functions were not described anywhere in the docs.
But since they have been around since 7.0 and mentioned in the description
for system catalog like pg_database, it's reasonable to add short
descriptions for them.
Author: Ian Lawrence Barwick
Reviewed-by: Laurenz Albe, Fujii Masao
Discussion: https://postgr.es/m/CAB8KJ=infievn4q1N4X7Vx8w4_RMPPG0pLvxhSDjy5WQOSHW9g@mail.gmail.com
The old URL was HTTP 404 and the git link didn't build. Also update two
other ICU links. If we ever get a good link we will add it back.
Reported-by: Anton Voloshin
Author: Laurenz Albe
Backpatch-through: 10
gist.sgml and xindex.sgml hadn't been fully updated for the
addition of a sortsupport support function (commit 16fa9b2b3).
xindex.sgml also missed that the compress and decompress support
functions are optional, an apparently far older oversight.
In passing, fix gratuitous inconsistencies in wording and
capitalization.
Noted by E. Rogov. Back-patch to v14; the residual issues
before that aren't significant enough to bother with.
Discussion: https://postgr.es/m/163335322905.12519.5711557029494638051@wrigleys.postgresql.org
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
Commit 9868167500 added pg_stat_replication_slots view to monitor
ReorderBuffer stats but mistakenly added it under
"Dynamic Statistics Views" section in the docs whereas it belongs to
"Collected Statistics Views" section.
Author: Amit Kapila
Reviewed-by: Masahiko Sawada
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/CAA4eK1Kb5ur=OC-G4cAsqPOjoVe+S8LNw1WmUY8Owasjk8o5WQ@mail.gmail.com
Sequences were left out of the list of relation kinds that
verify_heapam knew how to check, though it is fairly trivial to allow
them. Doing that, and while at it, updating pg_amcheck to include
sequences in relations matched by table and relation patterns.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/81ad4757-92c1-4aa3-7bee-f609544837e3%40enterprisedb.com
Be a little more vocal about the risks of remote collations not
matching local ones. Actually fixing these risks seems hard,
and I've given up on the idea that it might be back-patchable.
So the best we can do for the back branches is add documentation.
Per discussion of bug #16583 from Jiří Fejfar.
Discussion: https://postgr.es/m/2438715.1632510693@sss.pgh.pa.us
Index vacuums may happen multiple times depending on the number of dead
tuples stored, as of maintenance_work_mem for a manual VACUUM. For
autovacuum, this is controlled by autovacuum_work_mem instead, if set.
The documentation mentioned the former, but not the latter in the
context of autovacuum.
Reported-by: Nikolai Berkoff
Author: Laurenz Albe, Euler Taveira
Discussion: https://postgr.es/m/161545365522.10134.12195402324485546870@wrigleys.postgresql.org
Backpatch-through: 9.6
This runtime-computed GUC shows the number of huge pages required
for the server's main shared memory area, taking advantage of the
work done in 0c39c29 and 0bd305e. This is useful for users to estimate
the amount of huge pages required for a server as it becomes possible to
do an estimation without having to start the server and potentially
allocate a large chunk of shared memory.
The number of huge pages is calculated based on the existing GUC
huge_page_size if set, or by using the system's default by looking at
/proc/meminfo on Linux. There is nothing new here as this commit reuses
the existing calculation methods, and just exposes this information
directly to the user. The routine calculating the huge page size is
refactored to limit the number of files with platform-specific flags.
This new GUC's name was the most popular choice based on the discussion
done. This is only supported on Linux.
I have taken the time to test the change on Linux, Windows and MacOS,
though for the last two ones large pages are not supported. The first
one calculates correctly the number of pages depending on the existing
GUC huge_page_size or the system's default.
Thanks to Andres Freund, Robert Haas, Kyotaro Horiguchi, Tom Lane,
Justin Pryzby (and anybody forgotten here) for the discussion.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
Until now, the -C option of postgres was handled before a small subset
of GUCs computed at runtime are initialized, leading to incorrect
results as GUC machinery would fall back to default values for such
parameters.
For example, data_checksums could report "off" for a cluster as the
control file is not loaded yet. Or wal_segment_size would show a
segment size at 16MB even if initdb --wal-segsize used something else.
Worse, the command would fail to properly report the recently-introduced
shared_memory, that requires to load shared_preload_libraries as these
could ask for a chunk of shared memory.
Support for runtime GUCs comes with a limitation, as the operation is
now allowed on a running server. One notable reason for this is that
_PG_init() functions of loadable libraries are called before all
runtime-computed GUCs are initialized, and this is not guaranteed to be
safe to do on running servers. For the case of shared_memory_size,
where we want to know how much memory would be used without allocating
it, this limitation is fine. Another case where this will help is for
huge pages, with the introduction of a different GUC to evaluate the
amount of huge pages required for a server before starting it, without
having to allocate large chunks of memory.
This feature is controlled with a new GUC flag, and four parameters are
classified as runtime-computed as of this change:
- data_checksums
- shared_memory_size
- data_directory_mode
- wal_segment_size
Some TAP tests are added to provide some coverage here, using
data_checksums in the tests of pg_checksums.
Per discussion with Andres Freund, Justin Pryzby, Magnus Hagander and
more.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
The available refresh options are specified as refresh_options under
REFRESH PUBLICATION, and DROP PUBLICATION itself has an option named
refresh. Clarify what we mean by refresh options to avoid confusion.
Backpatch through v14 where ALTER SUBSCRIPTION ... DROP PUBLICATION
was introduced.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAD21AoCm1wJ3A8Q9EmBjRbShYkJ+o+Oa_z9O0hvwhvhUa2BSyg@mail.gmail.com
Backpatch-through: 14
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
The subscription parameters are rearranged into two groups:
a) those that control what happens during Create Subscription
b) those that control the replication behavior
This makes the documentation of Create Subscription easier to follow.
Author: Peter Smith
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAHut+PtPJDSOxtuMGpO2yDrRPKxcYGL4n7HqJP9HernZE=Cj+g@mail.gmail.com
This switches the default ACL to what the documentation has recommended
since CVE-2018-1058. Upgrades will carry forward any old ownership and
ACL. Sites that declined the 2018 recommendation should take a fresh
look. Recipes for commissioning a new database cluster from scratch may
need to create a schema, grant more privileges, etc. Out-of-tree test
suites may require such updates.
Reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/20201031163518.GB4039133@rfd.leadboat.com
This runtime-computed GUC shows the size of the server's main shared
memory area, taking into account the amount of shared memory allocated
by extensions as this is calculated after processing
shared_preload_libraries.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
This commit adds postgres_fdw.application_name GUC which specifies
a value for application_name configuration parameter used
when postgres_fdw establishes a connection to a foreign server.
This GUC setting always overrides application_name option of
the foreign server object. This GUC is useful when we want to
specify our own application_name per remote connection.
Previously application_name of a remote connection could be set
basically only via options of a server object. But which meant that
every session connecting to the same foreign server basically
should use the same application_name. Also if we want to change
the setting, we had to execute "ALTER SERVER ... OPTIONS ..." command.
It was inconvenient.
Author: Hayato Kuroda
Reviewed-by: Masahiro Ikeda, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
This commit allows pg_stat_reset_single_table_counters() to reset statistics
for a single relation shared across all databases in the cluster to zero.
Bump catalog version.
Author: B Sadhu Prasad Patro
Reviewed-by: Mahendra Singh Thalor, Himanshu Upadhyaya, Dilip Kumar, Fujii Masao
Discussion: https://postgr.es/m/CAFF0-CGy7EHeF=AqqkGMF85cySPQBgDcvNk73G2O0vL94O5U5A@mail.gmail.com
While populating the pgbench_accounts table, plain COPY was
unconditionally used. By changing it to COPY FREEZE, the time for
VACUUM is significantly reduced, thus the total time of "pgbench -i"
is also reduced. This only happens if pgbench runs against PostgreSQL
14 or later because COPY FREEZE in previous versions of PostgreSQL does
not bring the benefit. Also if partitioning is used, COPY FREEZE
cannot be used. In this case plain COPY will be used too.
Author: Tatsuo Ishii
Discussion: https://postgr.es/m/20210308.143907.2014279678657453983.t-ishii@gmail.com
Reviewed-by: Fabien COELHO, Laurenz Albe, Peter Geoghegan, Dean Rasheed
Commit 6c3ffd6 added a couple new predefined roles but didn't properly
wrap the SQL commands mentioned in the description of those roles with
command tags, so add them now.
Backpatch-through: 14
Reported-by: Michael Banck
Discussion: https://postgr.es/m/606d8b1c.1c69fb81.3df04.1a99@mx.google.com
Since the whole documentation tool chain is now UTF-8 and there is an
increasing number of non-ISO-8859-1 characters in the text, keeping
the Texinfo output in ISO 8859-1 just creates unnecessary
complications. Depending on the platform, there are conversion
failures and thus build failures, or weirdly converted characters. By
changing the output to UTF-8, the whole encoding conversion business
is sidestepped.
The current refresh behavior tries to just refresh added/dropped
publications but that leads to removing wrong tables from subscription. We
can't refresh just the dropped publication because it is quite possible
that some of the tables are removed from publication by that time and now
those will remain as part of the subscription. Also, there is a chance
that the tables that were part of the publication being dropped are also
part of another publication, so we can't remove those.
So, we decided that by default, add/drop commands will also act like
REFRESH PUBLICATION which means they will refresh all the publications. We
can keep the old behavior for "add publication" but it is better to be
consistent with "drop publication".
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/OS0PR01MB5716935D4C2CC85A6143073F94EF9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Using --quiet in combination with --no-strict-names didn't work as
documented, a warning message was still emitted. Since the --quiet
flag was working in an unconventional way to other utilities, fix
by removing the functionality instead.
Backpatch through 14 where pg_amcheck was introduced.
Bug: 17148
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/17148-b5087318e2b04fc6@postgresql.org
Backpatch-through: 14
This reverts the following commits:
1b5617eb84 Describe (auto-)analyze behavior for partitioned tables
0e69f705cc Set pg_class.reltuples for partitioned tables
41badeaba8 Document ANALYZE storage parameters for partitioned tables
0827e8af70 autovacuum: handle analyze for partitioned tables
There are efficiency issues in this code when handling databases with
large numbers of partitions, and it doesn't look like there isn't any
trivial way to handle those. There are some other issues as well. It's
now too late in the cycle for nontrivial fixes, so we'll have to let
Postgres 14 users continue to manually deal with ANALYZE their
partitioned tables, and hopefully we can fix the issues for Postgres 15.
I kept [most of] be280cdad2 ("Don't reset relhasindex for partitioned
tables on ANALYZE") because while we added it due to 0827e8af70, it is
a good bugfix in its own right, since it affects manual analyze as well
as autovacuum-induced analyze, and there's no reason to revert it.
I retained the addition of relkind 'p' to tables included by
pg_stat_user_tables, because reverting that would require a catversion
bump.
Also, in pg14 only, I keep a struct member that was added to
PgStat_TabStatEntry to avoid breaking compatibility with existing stat
files.
Backpatch to 14.
Discussion: https://postgr.es/m/20210722205458.f2bug3z6qzxzpx2s@alap3.anarazel.de
The initdb help message for --sync-only was a bit terse, and not
really self-explanatory. Make it clearer that initdb --sync-only
will exit after syncing, and expand the docs with a note on when
the option can be useful. Also align the help output with others
that exit immediately.
Author: Nathan Bossart, Gurjeet Singh
Discussion: https://postgr.es/m/CABwTF4U6hbNNE1bv=LxQdJybmUdZ5NJQ9rKY9tN82NXM8QH+iQ@mail.gmail.com
Background workers without shared memory access have been broken on
EXEC_BACKEND / windows builds since shortly after background workers have been
introduced, without that being reported. Clearly they are not commonly used.
The problem is that bgworker startup requires to be attached to shared memory
in EXEC_BACKEND child processes. StartBackgroundWorker() detaches from shared
memory for unconnected workers, but at that point we already have initialized
subsystems referencing shared memory.
Fixing this problem is not entirely trivial, so removing the option to not be
connected to shared memory seems the best way forward. In most use cases the
advantages of being connected to shared memory far outweigh the disadvantages.
As there have been no reports about this issue so far, we have decided that it
is not worth trying to address the problem in the back branches.
Per discussion with Alvaro Herrera, Robert Haas and Tom Lane.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210802065116.j763tz3vz4egqy3w@alap3.anarazel.de
The check for sslsni only checked for existence of the parameter
but not for the actual value of the param. This meant that the
SNI extension was always turned on. Fix by inspecting the value
of sslsni and only activate the SNI extension iff sslsni has been
enabled. Also update the docs to be more in line with how other
boolean params are documented.
Backpatch to 14 where sslsni was first implemented.
Reviewed-by: Tom Lane
Backpatch-through: 14, where sslni was added
Amit Kapila