target columns in INSERT and UPDATE targetlists. Don't rely on resname
to be accurate in ruleutils, either. This fixes bug reported by
Donald Fraser, in which renaming a column referenced in a rule did not
work very well.
query node, since that won't work unless the planner is upgraded.
Someday we should try to support at least some cases of this, but for
now just plug the hole in the dike. Per discussion with Dmitry Tkach.
instead of the former kluge whereby gram.y emitted already-transformed
expressions. This is needed so that Params appearing in these clauses
actually work correctly. I suppose some might claim that the side effect
of 'SELECT ... LIMIT 2+2' working is a new feature, but I say this is
a bug fix.
- LIKE <subtable> [ INCLUDING DEFAULTS | EXCLUDING DEFAULTS ]
- Quick cleanup of analyze.c function prototypes.
- New non-reserved keywords (INCLUDING, EXCLUDING, DEFAULTS), SQL 200X
Opted not to extend for check constraints at this time.
As per the definition that it's user defined columns, OIDs are NOT
inherited.
Doc and Source patches attached.
--
Rod Taylor <rbt@rbt.ca>
silently resolving them to type TEXT. This is comparable to what we
do when faced with UNKNOWN in CASE, UNION, and other contexts. It gets
rid of this and related annoyances:
select distinct f1, '' from int4_tbl;
ERROR: Unable to identify an ordering operator '<' for type unknown
This was discussed many moons ago, but no one got round to fixing it.
both clauses specify the same targets, rather than always using the
default ordering operator. This allows 'GROUP BY foo ORDER BY foo DESC'
to be done with only one sort step.
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
that the types of untyped string-literal constants are deduced (ie,
when coerce_type is applied to 'em, that's what the type must be).
Remove the ancient hack of storing the input Param-types array as a
global variable, and put the info into ParseState instead. This touches
a lot of files because of adjustment of routine parameter lists, but
it's really not a large patch. Note: PREPARE statement still insists on
exact specification of parameter types, but that could easily be relaxed
now, if we wanted to do so.
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
of the containing query (which really can only happen in a rule context).
Per example from Brandon Craig Rhodes. Also, make the error message
more specific for the similar case with sub-select in FROM. The revised
coding should be easier to adapt to SQL99's LATERAL(), when we get around
to supporting that.
targetlist of a set-operation tree. I'm not sure that this solution
will really stand the test of time --- perhaps we need to make a special
RTE for such vars to refer to. But this quick hack fixes Brandon Craig
Rhodes' complaint of 10-Feb-02 about EXCEPT in CREATE RULE, while not
changing any behavior in the better-tested cases where leftmostRTI is
one anyway.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
that used to do it in planner. That was an ancient kluge that was
never satisfactory; errors should be detected at parse time when possible.
But at the time we didn't have the support mechanism (expression_tree_walker
et al) to make it convenient to do in the parser.
columns in DefineIndex. So, ALTER TABLE ... PRIMARY KEY will now
automatically add the NOT NULL constraint. It appeared the alter_table
regression test wanted this to occur, as after the change the regression
test better matched in inline 'fails'/'succeeds' comments.
Rod Taylor
execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
make VALUE a non-reserved word again, use less invasive method of passing
ConstraintTestValue into transformExpr, fix problems with nested constraint
testing, do correct thing with NULL result from a constraint expression,
remove memory leak. Domain checks still need much more work if we are going
to allow ALTER DOMAIN, however.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
parse analysis and into the execution code (in tablecmds.c). This
eliminates a lot of unreasonably complex code that needed to have two
or more execution paths in case it was dealing with a not-yet-created
table column vs. an already-existing one. The execution code is always
dealing with already-created tables and so needs only one case. This
also eliminates some potential race conditions (the table wasn't locked
between parse analysis and execution), makes it easy to fix the gripe
about wrong referenced-column names generating a misleading error message,
and lets us easily add a dependency from the foreign-key constraint to
the unique index that it requires the referenced table to have. (Cf.
complaint from Kris Jurka 12-Sep-2002 on pgsql-bugs.)
Also, third try at building a deletion mechanism that is not sensitive
to the order in which pg_depend entries are visited. Adding the above-
mentioned dependency exposed the folly of what dependency.c had been
doing: it failed for cases where B depends on C while both auto-depend
on A. Dropping A should succeed in this case, but was failing if C
happened to be visited before B. It appears the only solution is two
separate walks over the dependency tree.
to be flexible about assignment casts without introducing ambiguity in
operator/function resolution. Introduce a well-defined promotion hierarchy
for numeric datatypes (int2->int4->int8->numeric->float4->float8).
Change make_const to initially label numeric literals as int4, int8, or
numeric (never float8 anymore).
Explicitly mark Func and RelabelType nodes to indicate whether they came
from a function call, explicit cast, or implicit cast; use this to do
reverse-listing more accurately and without so many heuristics.
Explicit casts to char, varchar, bit, varbit will truncate or pad without
raising an error (the pre-7.2 behavior), while assigning to a column without
any explicit cast will still raise an error for wrong-length data like 7.3.
This more nearly follows the SQL spec than 7.2 behavior (we should be
reporting a 'completion condition' in the explicit-cast cases, but we have
no mechanism for that, so just do silent truncation).
Fix some problems with enforcement of typmod for array elements;
it didn't work at all in 'UPDATE ... SET array[n] = foo', for example.
Provide a generalized array_length_coerce() function to replace the
specialized per-array-type functions that used to be needed (and were
missing for NUMERIC as well as all the datetime types).
Add missing conversions int8<->float4, text<->numeric, oid<->int8.
initdb forced.
already fixed by You. However there were a few left and attached patch
should fix the rest of them.
I used StringInfo only in 2 places and both of them are inside debug
ifdefs. Only performance penalty will come from using strlen() like all
the other code does.
I also modified some of the already patched parts by changing
snprintf(buf, 2 * BUFSIZE, ... style lines to
snprintf(buf, sizeof(buf), ... where buf is an array.
Jukka Holappa
should be pretty safe in practice, but it's probably better to be safe
than sorry.
I was actually looking for cases where NAMEDATALEN is assumed to be
32, but only found one. That's fixed too, as well as a few bits of
code cleanup.
Neil Conway
copying into a fixed-size buffer (in this case, a buffer of
NAMEDATALEN bytes). AFAICT nothing to worry about here, but worth
fixing anyway...
Neil Conway
latent wrong-struct-type bugs and makes the coding style more uniform,
since the majority of places working with lists of column names were
already using Strings not Idents. While at it, remove vestigial
support for Stream node type, and otherwise-unreferenced nodes.h entries
for T_TupleCount and T_BaseNode.
NB: full recompile is recommended due to changes of Node type numbers.
This shouldn't force an initdb though.
code review by Tom Lane. Remaining issues: functions that take or
return tuple types are likely to break if one drops (or adds!)
a column in the table defining the type. Need to think about what
to do here.
Along the way: some code review for recent COPY changes; mark system
columns attnotnull = true where appropriate, per discussion a month ago.
Peter Eisentraut