Commit 4b754d6c1 introduced the concept of an excludeOnly scan key,
which cannot select matching index entries but can reject
non-matching tuples, for example a tsquery such as '!term'. There are
poorly-documented assumptions that such scan keys do not appear as the
first scan key. ginNewScanKey did nothing to ensure that, however,
with the result that certain GIN index searches could go into an
infinite loop while apparently-equivalent queries with the clauses in
a different order were fine.
Fix by teaching ginNewScanKey to place all excludeOnly scan keys
after all not-excludeOnly ones. So far as we know at present,
it might be sufficient to avoid the case where the very first
scan key is excludeOnly; but I'm not very convinced that there
aren't other dependencies on the ordering.
Bug: #19031
Reported-by: Tim Wood <washwithcare@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19031-0638148643d25548@postgresql.org
Backpatch-through: 13
This code was relying on "long", which is signed 8 bytes everywhere
except on Windows where it is 4 bytes, that could potentially expose it
to overflows, even if the current uses in the code are fine as far as I
know. This code is now able to rely on the same sizeof() variable
everywhere, with int64. long was used for sizes, partition counts and
entry counts.
Some callers of the dynahash.c routines used long declarations, that can
be cleaned up to use int64 instead. There was one shortcut based on
SIZEOF_LONG, that can be removed. long is entirely removed from
dynahash.c and hsearch.h.
Similar work was done in b1e5c9fa9a.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/aKQYp-bKTRtRauZ6@paquier.xyz
This commit adds CHECK_FOR_INTERRUPTS to loops iterating over shared
buffers in several pg_buffercache functions, allowing them to be
interrupted during long-running operations.
Backpatch to all supported versions. Add CHECK_FOR_INTERRUPTS to the
loop in pg_buffercache_pages() in all supported branches, and to
pg_buffercache_summary() and pg_buffercache_usage_counts() in version
16 and newer.
Author: SATYANARAYANA NARLAPURAM <satyanarlapuram@gmail.com>
Discussion: https://postgr.es/m/CAHg+QDcejeLx7WunFT3DX6XKh1KshvGKa8F5au8xVhqVvvQPRw@mail.gmail.com
Backpatch-through: 13
Doing that seems rather random and unnecessary. This commit removes
those and fixes fallout, which is pretty minimal. We do need to add a
forward declaration of struct TM_IndexDeleteOp (whose full definition
appears in tableam.h) so that _bt_delitems_delete_check()'s declaration
can use it.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/202508051109.lzk3lcuzsaxo@alvherre.pgsql
Remove conditionally-compiled code for the other case.
Replace uses of FLOAT8PASSBYVAL with constant "true", mainly because
it was quite confusing in cases where the type we were dealing with
wasn't float8.
I left the associated pg_control and Pg_magic_struct fields in place.
Perhaps we should get rid of them, but it would save little, so it
doesn't seem worth thinking hard about the compatibility implications.
I just labeled them "vestigial" in places where that seemed helpful.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
The tests fixed in this commit were changing the sampling setting of a
foreign server, but then were analyzing a local table instead of a
foreign table, meaning that the test was not running for its original
purpose.
This commit changes the ANALYZE commands to analyze the foreign table,
and changes the foreign table definition to point to a valid remote
table. Attempting to analyze the foreign table "analyze_ftable" would
have failed before this commit, because "analyze_rtable1" is not defined
on the remote side.
Issue introduced by 8ad51b5f44.
Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CADkLM=cpUiJ3QF7aUthTvaVMmgQcm7QqZBRMDLhBRTR+gJX-Og@mail.gmail.com
Backpatch-through: 16
Fix a couple more places where an explicit Datum conversion
is needed (not clear how we missed these in ff89e182d and
previous commits).
Replace the minority usage "(Datum) NULL" with "(Datum) 0".
The former depends on the assumption that Datum is the same
width as Pointer, the latter doesn't. Anyway consistency
is a good thing.
This is, I believe, the last of the notational mop-up needed
before we can consider changing Datum to uint64 everywhere.
It's also important cleanup for more aggressive ideas such
as making Datum a struct.
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
Discussion: https://postgr.es/m/8246d7ff-f4b7-4363-913e-827dadfeb145@eisentraut.org
Add various missing conversions from and to Datum. The previous code
mostly relied on implicit conversions or its own explicit casts
instead of using the correct DatumGet*() or *GetDatum() functions.
We think these omissions are harmless. Some actual bugs that were
discovered during this process have been committed
separately (80c758a2e1, fd2ab03fea).
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8246d7ff-f4b7-4363-913e-827dadfeb145%40eisentraut.org
before checking ->has_scram_keys. MyProcPort is NULL in background
workers. So this could crash for example if a background worker
accessed a suitable configured foreign table.
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/27b29a35-9b96-46a9-bc1a-914140869dac%40gmail.com
The code used
return (Selectivity) 0.0;
where
PG_RETURN_FLOAT8(0.0);
would be correct.
On 64-bit systems, these are pretty much equivalent, but on 32-bit
systems, PG_RETURN_FLOAT8() correctly produces a pointer, but the old
wrong code would return a null pointer, possibly leading to a crash
elsewhere.
We think this code is actually not reachable because bqarr_in won't
accept an empty query, and there is no other function that will
create query_int values. But better be safe and not let such
incorrect code lie around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8246d7ff-f4b7-4363-913e-827dadfeb145%40eisentraut.org
Commit 9e6104c66 disallowed transition tables on foreign tables, but
failed to account for cases where a foreign table is a child table of a
partitioned/inherited table on which transition tables exist, leading to
incorrect transition tuples collected from such foreign tables for
queries on the parent table triggering transition capture. This
occurred not only for inherited UPDATE/DELETE but for partitioned INSERT
later supported by commit 3d956d956, which should have handled it at
least for the INSERT case, but didn't.
To fix, modify ExecAR*Triggers to throw an error if the given relation
is a foreign table requesting transition capture. Also, this commit
fixes make_modifytable so that in case of an inherited UPDATE/DELETE
triggering transition capture, FDWs choose normal operations to modify
child foreign tables, not DirectModify; which is needed because they
would otherwise skip the calls to ExecAR*Triggers at execution, causing
unexpected behavior.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14QJYikKzBDCe3jMbpGENnQ7popFmbEgm-XTNuk55oyHg%40mail.gmail.com
Backpatch-through: 13
These were introduced (commit efdc7d7475) at the same time as we were
moving to using the standard inttypes.h format macros (commit
a0ed19e0a9). It doesn't seem useful to keep a new already-deprecated
interface like this with only a few users, so remove the new symbols
again and have the callers use PRIx64.
(Also, INT64_HEX_FORMAT was kind of a misnomer, since hex formats all
use unsigned types.)
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/0ac47b5d-e5ab-4cac-98a7-bdee0e2831e4%40eisentraut.org
Macros like VARDATA() and VARSIZE() should be thought of as taking
values of type pointer to struct varlena or some other related struct.
The way they are implemented, you can pass anything to it and it will
cast it right. But this is in principle incorrect. To fix, add the
required DatumGetPointer() calls. Or in a couple of cases, remove
superfluous PointerGetDatum() calls.
It is planned in a subsequent patch to change macros like VARDATA()
and VARSIZE() to inline functions, which will enforce stricter typing.
This is in preparation for that.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/928ea48f-77c6-417b-897c-621ef16685a6%40eisentraut.org
Currently, ALTER DATABASE/ROLE/SYSTEM RESET [ALL] with an unknown
custom GUC with a prefix reserved by MarkGUCPrefixReserved() errors
(unless a superuser runs a RESET ALL variant). This is problematic
for cases such as an extension library upgrade that removes a GUC.
To fix, simply make sure the relevant code paths explicitly allow
it. Note that we require superuser or privileges on the parameter
to reset it. This is perhaps a bit more restrictive than is
necessary, but it's not clear whether further relaxing the
requirements is safe.
Oversight in commit 88103567cb. The ALTER SYSTEM fix is dependent
on commit 2d870b4aef, which first appeared in v17. Unfortunately,
back-patching that commit would introduce ABI breakage, and while
that breakage seems unlikely to bother anyone, it doesn't seem
worth the risk. Hence, the ALTER SYSTEM part of this commit is
omitted on v15 and v16.
Reported-by: Mert Alev <mert@futo.org>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/18964-ba09dea8c98fccd6%40postgresql.org
Backpatch-through: 15
This patch adds two new counters to pg_stat_statements:
- generic_plan_calls
- custom_plan_calls
These counters track how many times a prepared statement was executed
using a generic or custom plan, respectively, providing a global
equivalent at query level, for top and non-top levels, of
pg_prepared_statements whose data is restricted to a single session.
This commit builds upon e125e36002. The module is bumped to version
1.13. PGSS_FILE_HEADER is bumped as well, something that the latest
patches touching the on-disk format of the PGSS file did not actually
bother with since 2022..
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Nikolay Samokhvalov <nik@postgres.ai>
Discussion: https://postgr.es/m/CAA5RZ0uFw8Y9GCFvafhC=OA8NnMqVZyzXPfv_EePOt+iv1T-qQ@mail.gmail.com
pgfdw_report_error has the same design fault as elog/ereport
do, namely that it might or might not return depending on elevel.
While those functions are too widely used to redesign, there are
only about 30 call sites for pgfdw_report_error, and it's not
exposed for extension use. So let's rethink it. Split it into
pgfdw_report_error() which hard-wires ERROR elevel and is marked
pg_noreturn, and pgfdw_report() which allows only elevels less
than ERROR. (Thanks to Álvaro Herrera for suggesting this naming.)
The motivation for doing this now is that in the wake of commit
80aa9848b, which removed a bunch of PG_TRYs from postgres_fdw,
we're seeing more thorough flow analysis there from C compilers
and Coverity. Marking pgfdw_report_error as noreturn where
appropriate should help prevent false-positive complaints.
We could alternatively have invented a macro wrapper similar
to what we use for elog/ereport, but that code is sufficiently
fragile that I didn't find it appetizing to make another copy.
Since 80aa9848b already changed pgfdw_report_error's signature,
this won't make back-patching any harder than it was already.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/420221.1753714491@sss.pgh.pa.us
In the wake of commit 80aa9848b, a few compilers think that
postgresAcquireSampleRowsFunc's "reltuples" might be used
uninitialized. The logic is visibly correct, both before
and after that change; presumably what happened here is that
the previous presence of a setjmp() in the function stopped
them from attempting any flow analysis at all. Add a dummy
initialization to silence the warning.
Reported-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAExHW5tkerCufA_F6oct5dMJ61N+yVrVgYXL7M8dD-5_zXjrDw@mail.gmail.com
Valgrind complains that the PQconninfoOption array returned by libpq
is leaked. We apparently believed that we could suppress that warning
by storing that array's address in a static variable. However, modern
C compilers are bright enough to optimize the static variable away.
We could escalate that arms race by making the variable global.
But on the whole it seems better to revise the code so that it
can free libpq's result properly. The only thing that costs
us is copying the parameter-name keywords; which seems like a
pretty negligible cost in a function that runs at most once per
process.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
Remove a bunch of PG_TRY constructs, de-volatilize related
variables, remove some PQclear calls in error paths.
Aside from making the code simpler and shorter, this should
provide some marginal performance gains.
For ease of review, I did not re-indent code within the removed
PG_TRY constructs. That'll be done in a separate patch.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
Commit 232d8caea fixed a case where postgres_fdw could lose track
of a PGresult object, resulting in a process-lifespan memory leak.
But I have little faith that there aren't other potential PGresult
leakages, now or in future, in the backend modules that use libpq.
Therefore, this patch proposes infrastructure that makes all
PGresults returned from libpq act as though they are palloc'd
in the CurrentMemoryContext (with the option to relocate them to
another context later). This should greatly reduce the risk of
careless leaks, and it also permits removal of a bunch of code
that attempted to prevent such leaks via PG_TRY blocks.
This patch adds infrastructure that wraps each PGresult in a
"libpqsrv_PGresult" that provides a memory context reset callback
to PQclear the PGresult. Code using this abstraction is inherently
memory-safe to the same extent as we are accustomed to in most backend
code. Furthermore, we add some macros that automatically redirect
calls of the libpq functions concerned with PGresults to use this
infrastructure, so that almost no source-code changes are needed to
wheel this infrastructure into place in all the backend code that
uses libpq.
Perhaps in future we could create similar infrastructure for
PGconn objects, but there seems less need for that.
This patch just creates the infrastructure and makes relevant code
use it, including reverting 232d8caea in favor of this mechanism.
A good deal of follow-on simplification is possible now that we don't
have to be so cautious about freeing PGresults, but I'll put that in
a separate patch.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
Commit 112faf1378 introduced a translation marker in libpq-be-fe-helpers.h,
but this caused build failures on some platforms—such as the one reported
by buildfarm member indri—due to linker issues with dblink. This is the same
problem previously addressed in commit 213c959a29.
To fix the issue, this commit removes the translation marker from
libpq-be-fe-helpers.h, following the approach used in 213c959a29.
It also removes the associated gettext_noop() calls added in commit
112faf1378, as they are no longer needed.
While reviewing this, a gettext_noop() call was also found in
contrib/basic_archive. Since contrib modules don't support translation,
this call has been removed as well.
Per buildfarm member indri.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/0e6299d9-608a-4ffa-aeb1-40cb8a99000b@oss.nttdata.com
Previously, NOTICE, WARNING, and similar messages received from remote
servers over replication, postgres_fdw, or dblink connections were printed
directly to stderr on the local server (e.g., the subscriber). As a result,
these messages lacked log prefixes (e.g., timestamp), making them harder
to trace and correlate with other log entries.
This commit addresses the issue by introducing a custom notice receiver
for replication, postgres_fdw, and dblink connections. These messages
are now logged via ereport(), ensuring they appear in the logs with proper
formatting and context, which improves clarity and aids in debugging.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CALDaNm2xsHpWRtLm-VL_HJCsaE3+1Y_n-jDEAr3-suxVqc3xoQ@mail.gmail.com
In commit b262ad440, we introduced an optimization that reduces an IS
[NOT] NULL qual on a NOT NULL column to constant true or constant
false, provided we can prove that the input expression of the NullTest
is not nullable by any outer joins or grouping sets. This deduction
happens quite late in the planner, during the distribution of quals to
rels in query_planner. However, this approach has some drawbacks: we
can't perform any further folding with the constant, and it turns out
to be prone to bugs.
Ideally, this deduction should happen during constant folding.
However, the per-relation information about which columns are defined
as NOT NULL is not available at that point. This information is
currently collected from catalogs when building RelOptInfos for base
or "other" relations.
This patch moves the collection of NOT NULL attribute information for
relations before pull_up_sublinks, storing it in a hash table keyed by
relation OID. It then uses this information to perform the NullTest
deduction for Vars during constant folding. This also makes it
possible to leverage this information to pull up NOT IN subqueries.
Note that this patch does not get rid of restriction_is_always_true
and restriction_is_always_false. Removing them would prevent us from
reducing some IS [NOT] NULL quals that we were previously able to
reduce, because (a) the self-join elimination may introduce new IS NOT
NULL quals after constant folding, and (b) if some outer joins are
converted to inner joins, previously irreducible NullTest quals may
become reducible.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAMbWs4-bFJ1At4btk5wqbezdu8PLtQ3zv-aiaY3ry9Ymm=jgFQ@mail.gmail.com
When using a prepared statement to select data from a PostgreSQL foreign
table (postgres_fdw) with the "field = ANY($1)" expression, the operation
is not pushed down when an implicit type case is applied, and a generic plan
is used. This commit resolves the issue by supporting the push-down of
ArrayCoerceExpr, which is used in this case. The support is quite
straightforward and similar to other nods, such as RelabelType.
Discussion: https://postgr.es/m/4f0cea802476d23c6e799512ffd17aff%40postgrespro.ru
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Previously, amcheck could produce misleading error message when
a partitioned index was passed to functions like bt_index_check().
For example, bt_index_check() with a partitioned btree index produced:
ERROR: expected "btree" index as targets for verification
DETAIL: Relation ... is a btree index.
Reporting "expected btree index as targets" even when the specified
index was a btree was confusing. In this case, the function should fail
since the partitioned index specified is not valid target. This commit
improves the error reporting to better reflect this actual issue. Now,
bt_index_check() with a partitioned index, the error message is:
ERROR: expected index as targets for verification
DETAIL: This operation is not supported for partitioned indexes.
This commit also applies the following minor changes:
- Simplifies index_checkable() by using get_am_name() to retrieve
the access method name.
- Changes index_checkable() from extern to static, as it is only used
in verify_common.c.
- Updates the error code for invalid indexes to
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE,
aligning with usage in similar modules like pgstattuple.
Author: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/8829854bbfc8635ddecd0846bb72dfda@oss.nttdata.com
During the development cycle of v18, btree_gist has been bumped once to
1.8 for the addition of translate_cmptype support functions (originally
7406ab623f, renamed in 32edf732e8). 1.9 has added sortsupport
functions (e4309f73f6).
There is no need for two version bumps in a module for a single major
release of PostgreSQL. This commit unifies both upgrades to a single
SQL script, downgrading btree_gist to 1.8.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/13c61807-f702-4afe-9a8d-795e2fd40923@illuminatedcomputing.com
Backpatch-through: 18
What we want in these places is "xmlChar *volatile ptr",
not "volatile xmlChar *ptr". The former means that the
pointer variable itself needs to be treated as volatile,
while the latter says that what it points to is volatile.
Since the point here is to ensure that the pointer variables
don't go crazy after a longjmp, it's the former semantics
that we need. The misplacement of "volatile" also led
to needing to cast away volatile in some places.
Also fix a number of places where variables that are assigned to
within a PG_TRY and then used after it were not initialized or
not marked as volatile. (A few buildfarm members were issuing
"may be used uninitialized" warnings about some of these variables,
which is what drew my attention to this area.) In most cases
these variables were being set as the last step within the PG_TRY
block, which might mean that we could get away without the "volatile"
marking. But doing that seems unsafe and is definitely not per our
coding conventions.
These problems seem to have come in with 732061150, so no need
for back-patch.
This commit standardizes the output format for LSNs to ensure consistent
representation across various tools and messages. Previously, LSNs were
inconsistently printed as `%X/%X` in some contexts, while others used
zero-padding. This often led to confusion when comparing.
To address this, the LSN format is now uniformly set to `%X/%08X`,
ensuring the lower 32-bit part is always zero-padded to eight
hexadecimal digits.
Author: Japin Li <japinli@hotmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/ME0P300MB0445CA53CA0E4B8C1879AF84B641A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
libxml2 has deprecated the members of xmlBuffer, and it is recommended
to access them with dedicated routines. We have only one case in the
tree where this shows an impact: xml2/xpath.c where "content" was
getting directly accessed. The rest of the code looked fine, checking
the PostgreSQL code with libxml2 close to the top of its "2.14" branch.
xmlBufferContent() exists since year 2000 based on a check of the
upstream libxml2 tree, so let's switch to it.
Like 400928b83b, backpatch all the way down as this can have an impact
on all the branches already released once newer versions of libxml2 get
more popular.
Reported-by: Walid Ibrahim <walidib@amazon.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aGdSdcR4QTjEHX6s@paquier.xyz
Backpatch-through: 13
When estimating the cost/size of a pre-sorted path for a given upper
relation using local stats, this function dereferences the passed-in
PgFdwPathExtraData pointer without checking that it is not NULL. But
that is not a bug as the pointer is guaranteed to be non-NULL in that
case; to avoid confusion, add an Assert to ensure that it is not NULL
before dereferencing it.
Reported-by: Ranier Vilela <ranier.vf@gmail.com>
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/CAEudQArgiALbV1akQpeZOgim7XP05n%3DbDP1%3DTcOYLA43nRX_vA%40mail.gmail.com
Commit d70b17636d introduced the IndexCheckableCallback typedef for
a callback function, but it was never used. This commit removes
the unused typedef to clean up dead code.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/e1ea4e14-3b21-4e01-a5f2-0686883265df@oss.nttdata.com
Using the just-added infrastructure, extend btree_gin to support
cross-type operators in its other opclasses. All of the cross-type
comparison operators supported by the core btree opclasses for
these datatypes are now available for btree_gin indexes as well.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://postgr.es/m/262624.1738460652@sss.pgh.pa.us
Extend the infrastructure in btree_gin.c to permit cross-type
operators, and add the code to support them for the int2, int4,
and int8 opclasses. (To keep this patch digestible, I left
the other datatypes for a separate patch.) This improves the
usability of btree_gin indexes by allowing them to support the
same set of queries that a regular btree index does.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://postgr.es/m/262624.1738460652@sss.pgh.pa.us
The previous minimum was to maintain support for Python 3.5, but we
now require Python 3.6 anyway (commit 45363fca63), so that reason is
obsolete. A small raise to Meson 0.57 allows getting rid of a fair
amount of version conditionals and silences some future-deprecated
warnings.
With the version bump, the following deprecation warnings appeared and
are fixed:
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.55.0': ExternalProgram.path. use ExternalProgram.full_path() instead
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.56.0': meson.build_root. use meson.project_build_root() or meson.global_build_root() instead.
It turns out that meson 0.57.0 and 0.57.1 are buggy for our use, so
the minimum is actually set to 0.57.2. This is specific to this
version series; in the future we won't necessarily need to be this
precise.
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/42e13eb0-862a-441e-8d84-4f0fd5f6def0%40eisentraut.org
Prior to this patch, every FETCH call would generate a unique queryId
with a different size specified. Depending on the workloads, this could
lead to a significant bloat in pg_stat_statements, as repeatedly calling
a specific cursor would result in a new queryId each time. For example,
FETCH 1 c1; and FETCH 2 c1; would produce different queryIds.
This patch improves the situation by normalizing the fetch size, so as
semantically similar statements generate the same queryId. As a result,
statements like the below, which differ syntactically but have the same
effect, will now share a single queryId:
FETCH FROM c1
FETCH NEXT c1
FETCH 1 c1
In order to do a normalization based on the keyword used in FETCH,
FetchStmt is tweaked with a new FetchDirectionKeywords. This matters
for "howMany", which could be set to a negative value depending on the
direction, and we want to normalize the queries with enough information
about the direction keywords provided, including RELATIVE, ABSOLUTE or
all the ALL variants.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tA6LbHCg2qSS+KuM850BZC_+ZgHV7Ug6BXw22TNyF+MA@mail.gmail.com
When querying NUMA status of pages in shared memory, we need to touch
the memory first to get valid results. This may trigger valgrind
reports, because some of the memory (e.g. unpinned buffers) may be
marked as noaccess.
Solved by adding a valgrind suppresion. An alternative would be to
adjust the access/noaccess status before touching the memory, but that
seems far too invasive. It would require all those places to have
detailed knowledge of what the shared memory stores.
The pg_numa_touch_mem_if_required() macro is replaced with a function.
Macros are invisible to suppressions, so it'd have to suppress reports
for the caller - e.g. pg_get_shmem_allocations_numa(). So we'd suppress
reports for the whole function, and that seems to heavy-handed. It might
easily hide other valid issues.
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aEtDozLmtZddARdB@msg.df7cb.de
Backpatch-through: 18
The contrib module xml2/ has always been fuzzy with the cleanup of the
memory allocated by the calls internal to libxml2, even if there are
APIs in place giving a lot of control over the error behavior, all
located in the backend's xml.c.
The code paths fixed in the commit address multiple defects, while
sanitizing the code:
- In xpath.c, several allocations are done by libxml2 for
xpath_workspace, whose memory cleanup could go out of sight as it relied
on a single TRY/CATCH block done in pgxml_xpath(). workspace->res is
allocated by libxml2, and may finish by not being freed at all upon a
failure outside of a TRY area. This code is refactored so as the
TRY/CATCH block of pgxml_xpath() is moved one level higher to its
callers, which are responsible for cleaning up the contents of a
workspace on failure. cleanup_workspace() now requires a volatile
workspace, forcing as a rule that a TRY/CATCH block should be used.
- Several calls, like xmlStrdup(), xmlXPathNewContext(),
xmlXPathCtxtCompile(), etc. can return NULL on failures (for most of
them allocation failures. These forgot to check for failures, or missed
that pg_xml_error_occurred() should be called, to check if an error is
already on the stack.
- Some memory allocated by libxml2 calls was freed in an incorrect way,
"resstr" in xslt_process() being one example.
The class of errors fixed here are for problems that are unlikely going
to happen in practice, so no backpatch is done. The changes have
finished by being rather invasive, so it is perhaps not a bad thing to
be conservative and to keep these changes only on HEAD anyway.
Author: Michael Paquier <michael@paquier.xyz>
Reported-by: Karavaev Alexey <maralist86@mail.ru>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18943-2f2a04ab03904598@postgresql.org
This provides a convenient way to look up a database's OID. For
example, the query
SELECT * FROM pg_shdepend
WHERE dbid = (SELECT oid FROM pg_database
WHERE datname = current_database());
can now be simplified to
SELECT * FROM pg_shdepend
WHERE dbid = current_database()::regdatabase;
Like the regrole type, regdatabase has cluster-wide scope, so we
disallow regdatabase constants from appearing in stored
expressions.
Bumps catversion.
Author: Ian Lawrence Barwick <barwick@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aBpjJhyHpM2LYcG0%40nathan
This is required before the creation of a new branch. pgindent is
clean, as well as is reformat-dat-files.
perltidy version is v20230309, as documented in pgindent's README.
Commit 62d712ecfd made query jumbling squash lists of Consts as a
single element, but there's no reason not to treat PARAM_EXTERN
parameters the same. For these purposes, these values are indeed
constants for any particular execution of a query.
In particular, this should make list squashing more useful for
applications using extended query protocol, which would use parameters
extensively.
A complication arises: if a query has both external parameters and
squashable lists, then the parameter number used as placeholder for the
squashed list might be inconsistent with regards to the parameter
numbers used by the query literal. To reduce the surprise factor, all
parameters are renumbered starting from 1 in that case.
Author: Sami Imseih <samimseih@gmail.com>
Author: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAA5RZ0tRXoPG2y6bMgBCWNDt0Tn=unRerbzYM=oW0syi1=C1OA@mail.gmail.com
There's no principled reason for query jumbling to only remove the first
layer of RelabelType and CoerceViaIO. Change it to see through as many
layers as there are.
Fix two issues in parent_key validation in posting trees:
* It's not enough to check stack->parentblk is valid to determine if the
parentkey is valid. It's possible parentblk is set to a valid block
number, but parentkey is invalid. So check parentkey directly.
* We don't need to invalidate parentkey for all child pages of the
rightmost page. It's enough to invalidate it for the rightmost child
only, which means we can check more cases (less false negatives).
Issues reported by Arseniy Mukhin, along with a proposed patch. Review
by Andrey M. Borodin, cleanup and improvements by me.
Author: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CAE7r3MJ611B9TE=YqBBncewp7-k64VWs+sjk7XF6fJUX77uFBA@mail.gmail.com
The checks introduced by commit 14ffaece0f did not get the parent key
checks quite right, missing some data corruption cases. In particular:
* The "rightlink" check was not working as intended, because rightlink
is a BlockNumber, and InvalidBlockNumber is 0xFFFFFFFF, so
!GinPageGetOpaque(page)->rightlink
almost always evaluates to false (except for rightlink=0). So in most
cases parenttup was left NULL, preventing any checks against parent.
* Use GinGetDownlink() to retrieve child blkno to avoid triggering
Assert, same as the core GIN code.
Issues reported by Arseniy Mukhin, along with a proposed patch. Review
by Andrey M. Borodin, cleanup and improvements by me.
Author: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CAE7r3MJ611B9TE=YqBBncewp7-k64VWs+sjk7XF6fJUX77uFBA@mail.gmail.com
Tom Lane