In the previous coding, callers were faced with an awkward choice:
look up the name, do permissions checks, and then lock the table; or
look up the name, lock the table, and then do permissions checks.
The first choice was wrong because the results of the name lookup
and permissions checks might be out-of-date by the time the table
lock was acquired, while the second allowed a user with no privileges
to interfere with access to a table by users who do have privileges
(e.g. if a malicious backend queues up for an AccessExclusiveLock on
a table on which AccessShareLock is already held, further attempts
to access the table will be blocked until the AccessExclusiveLock
is obtained and the malicious backend's transaction rolls back).
To fix, allow callers of RangeVarGetRelid() to pass a callback which
gets executed after performing the name lookup but before acquiring
the relation lock. If the name lookup is retried (because
invalidation messages are received), the callback will be re-executed
as well, so we get the best of both worlds. RangeVarGetRelid() is
renamed to RangeVarGetRelidExtended(); callers not wishing to supply
a callback can continue to invoke it as RangeVarGetRelid(), which is
now a macro. Since the only one caller that uses nowait = true now
passes a callback anyway, the RangeVarGetRelid() macro defaults nowait
as well. The callback can also be used for supplemental locking - for
example, REINDEX INDEX needs to acquire the table lock before the index
lock to reduce deadlock possibilities.
There's a lot more work to be done here to fix all the cases where this
can be a problem, but this commit provides the general infrastructure
and fixes the following specific cases: REINDEX INDEX, REINDEX TABLE,
LOCK TABLE, and and DROP TABLE/INDEX/SEQUENCE/VIEW/FOREIGN TABLE.
Per discussion with Noah Misch and Alvaro Herrera.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
- Rename TSParserGetPrsid to get_ts_parser_oid.
- Rename TSDictionaryGetDictid to get_ts_dict_oid.
- Rename TSTemplateGetTmplid to get_ts_template_oid.
- Rename TSConfigGetCfgid to get_ts_config_oid.
- Rename FindConversionByName to get_conversion_oid.
- Rename GetConstraintName to get_constraint_oid.
- Add new functions get_opclass_oid, get_opfamily_oid, get_rewrite_oid,
get_rewrite_oid_without_relid, get_trigger_oid, and get_cast_oid.
The name of each function matches the corresponding catalog.
Thanks to KaiGai Kohei for the review.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
so long as all the trailing arguments are of the same (non-array) type.
The function receives them as a single array argument (which is why they
have to all be the same type).
It might be useful to extend this facility to aggregates, but this patch
doesn't do that.
This patch imposes a noticeable slowdown on function lookup --- a follow-on
patch will fix that by adding a redundant column to pg_proc.
Pavel Stehule
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
input datatypes given, and use this before trying OpernameGetCandidates.
This is faster than the old method when there's an exact match, and it
does not seem materially slower when there's not. And it definitely
makes some of the callers cleaner, because they didn't really want to
know about a list of candidates anyway. Per discussion with Atsushi Ogawa.
argument as a 'regclass' value instead of a text string. The frontend
conversion of text string to pg_class OID is now encapsulated as an
implicitly-invocable coercion from text to regclass. This provides
backwards compatibility to the old behavior when the sequence argument
is explicitly typed as 'text'. When the argument is just an unadorned
literal string, it will be taken as 'regclass', which means that the
stored representation will be an OID. This solves longstanding problems
with renaming sequences that are referenced in default expressions, as
well as new-in-8.1 problems with renaming such sequences' schemas or
moving them to another schema. All per recent discussion.
Along the way, fix some rather serious problems in dbmirror's support
for mirroring sequence operations (int4 vs int8 confusion for instance).
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
conversion of basic ASCII letters. Remove all uses of strcasecmp and
strncasecmp in favor of new functions pg_strcasecmp and pg_strncasecmp;
remove most but not all direct uses of toupper and tolower in favor of
pg_toupper and pg_tolower. These functions use the same notions of
case folding already developed for identifier case conversion. I left
the straight locale-based folding in place for situations where we are
just manipulating user data and not trying to match it to built-in
strings --- for example, the SQL upper() function is still locale
dependent. Perhaps this will prove not to be what's wanted, but at
the moment we can initdb and pass regression tests in Turkish locale.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
to be flexible about assignment casts without introducing ambiguity in
operator/function resolution. Introduce a well-defined promotion hierarchy
for numeric datatypes (int2->int4->int8->numeric->float4->float8).
Change make_const to initially label numeric literals as int4, int8, or
numeric (never float8 anymore).
Explicitly mark Func and RelabelType nodes to indicate whether they came
from a function call, explicit cast, or implicit cast; use this to do
reverse-listing more accurately and without so many heuristics.
Explicit casts to char, varchar, bit, varbit will truncate or pad without
raising an error (the pre-7.2 behavior), while assigning to a column without
any explicit cast will still raise an error for wrong-length data like 7.3.
This more nearly follows the SQL spec than 7.2 behavior (we should be
reporting a 'completion condition' in the explicit-cast cases, but we have
no mechanism for that, so just do silent truncation).
Fix some problems with enforcement of typmod for array elements;
it didn't work at all in 'UPDATE ... SET array[n] = foo', for example.
Provide a generalized array_length_coerce() function to replace the
specialized per-array-type functions that used to be needed (and were
missing for NUMERIC as well as all the datetime types).
Add missing conversions int8<->float4, text<->numeric, oid<->int8.
initdb forced.
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
with OPAQUE, as per recent pghackers discussion. I still want to do some
more work on the 'cstring' pseudo-type, but I'm going to commit the bulk
of the changes now before the tree starts shifting under me ...
documentation (xindex.sgml should be rewritten), need to teach pg_dump
about it, need to update contrib modules that currently build pg_opclass
entries by hand. Original patch by Bill Studenmund, grammar adjustments
and general update for 7.3 by Tom Lane.
bitmap, if present).
Per Tom Lane's suggestion the information whether a tuple has an oid
or not is carried in the tuple descriptor. For debugging reasons
tdhasoid is of type char, not bool. There are predefined values for
WITHOID, WITHOUTOID and UNDEFOID.
This patch has been generated against a cvs snapshot from last week
and I don't expect it to apply cleanly to current sources. While I
post it here for public review, I'm working on a new version against a
current snapshot. (There's been heavy activity recently; hope to
catch up some day ...)
This is a long patch; if it is too hard to swallow, I can provide it
in smaller pieces:
Part 1: Accessor macros
Part 2: tdhasoid in TupDesc
Part 3: Regression test
Part 4: Parameter withoid to heap_addheader
Part 5: Eliminate t_oid from HeapTupleHeader
Part 2 is the most hairy part because of changes in the executor and
even in the parser; the other parts are straightforward.
Up to part 4 the patched postmaster stays binary compatible to
databases created with an unpatched version. Part 5 is small (100
lines) and finally breaks compatibility.
Manfred Koizar
Bruce Momjian