We don't have any such platforms now, but might in the future.
Also, detect cases when a tablespace symlink points to a path that
is longer than we can handle, and give a warning.
No need to do "errcode(errcode_for_file_access())", just
"errcode_for_file_access()" is enough. The extra errcode() call is useless
but harmless, so there's no user-visible bug here. Nevertheless, backpatch
to 9.1 where this code were added.
There's no need to clamp the standby's xmin to be greater than
GetOldestXmin's result; if there were any such need this logic would be
hopelessly inadequate anyway, because it fails to account for
within-database versus cluster-wide values of GetOldestXmin. So get rid of
that, and just rely on sanity-checking that the xmin is not wrapped around
relative to the nextXid counter. Also, don't reset the walsender's xmin if
the current feedback xmin is indeed out of range; that just creates more
problems than we already had. Lastly, don't bother to take the
ProcArrayLock; there's no need to do that to set xmin.
Also improve the comments about this in GetOldestXmin itself.
In oder to exit on SIGTERM when in non-walsender code,
such as do_pg_stop_backup(), we need to set the interrupt
variables that are used there, and not just the walsender
local ones.
Fix a whole bunch of signal handlers that had been hacked to do things that
might change errno, without adding the necessary save/restore logic for
errno. Also make some minor fixes in unix_latch.c, and clean up bizarre
and unsafe scheme for disowning the process's latch. While at it, rename
the PGPROC latch field to procLatch for consistency with 9.2.
Issues noted while reviewing a patch by Peter Geoghegan.
The original definition had the problem that timeouts exceeding about 2100
seconds couldn't be specified on 32-bit machines. Milliseconds seem like
sufficient resolution, and finer grain than that would be fantasy anyway
on many platforms.
Back-patch to 9.1 so that this aspect of the latch API won't change between
9.1 and later releases.
Peter Geoghegan
Improve the documentation around weak-memory-ordering risks, and do a pass
of general editorialization on the comments in the latch code. Make the
Windows latch code more like the Unix latch code where feasible; in
particular provide the same Assert checks in both implementations.
Fix poorly-placed WaitLatch call in syncrep.c.
This patch resolves, for the moment, concerns around weak-memory-ordering
bugs in latch-related code: we have documented the restrictions and checked
that existing calls meet them. In 9.2 I hope that we will install suitable
memory barrier instructions in SetLatch/ResetLatch, so that their callers
don't need to be quite so careful.
Somebody thought it'd be cute to invent a set of Node tag numbers that were
defined independently of, and indeed conflicting with, the main tag-number
list. While this accidentally failed to fail so far, it would certainly
lead to trouble as soon as anyone wanted to, say, apply copyObject to these
node types. Clang was already complaining about the use of makeNode on
these tags, and I think quite rightly so. Fix by pushing these node
definitions into the mainstream, including putting replnodes.h where it
belongs.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
This means one less thing to configure when setting up synchronous
replication, and also avoids some ambiguity around what the behavior
should be when the settings of these variables conflict.
Fujii Masao, with additional hacking by me.
If a smart shutdown occurs just as a child is starting up, and the
child subsequently becomes a walsender, there is a race condition:
the postmaster might count the exstant backends, determine that there
is one normal backend, and wait for it to die off. Had the walsender
transition already occurred before the postmaster counted, it would
have proceeded with the shutdown.
To fix this, have each child that transforms into a walsender kick
the postmaster just after doing so, so that the state machine is
certain to advance.
Fujii Masao
than replication_timeout (a new GUC) milliseconds. The TCP timeout is often
too long, you want the master to notice a dead connection much sooner.
People complained about that in 9.0 too, but with synchronous replication
it's even more important to notice dead connections promptly.
Fujii Masao and Heikki Linnakangas
It originally worked this way, but was changed by commit
a8a8a3e096, since which time it's been impossible
for walreceiver to ever send a reply with write_location and flush_location
set to different values.
This is advantageous because the BG writer is alive until much later in
the shutdown sequence than WAL writer; we want to make sure that it's
possible to shut off synchronous replication during a smart shutdown,
else it might not be possible to complete the shutdown at all.
Per very reasonable gripes from Fujii Masao and Simon Riggs.
1. Don't ignore query cancel interrupts. Instead, if the user asks to
cancel the query after we've already committed it, but before it's on
the standby, just emit a warning and let the COMMIT finish.
2. Don't ignore die interrupts (pg_terminate_backend or fast shutdown).
Instead, emit a warning message and close the connection without
acknowledging the commit. Other backends will still see the effect of
the commit, but there's no getting around that; it's too late to abort
at this point, and ignoring die interrupts altogether doesn't seem like
a good idea.
3. If synchronous_standby_names becomes empty, wake up all backends
waiting for synchronous replication to complete. Without this, someone
attempting to shut synchronous replication off could easily wedge the
entire system instead.
4. Avoid depending on the assumption that if a walsender updates
MyProc->syncRepState, we'll see the change even if we read it without
holding the lock. The window for this appears to be quite narrow (and
probably doesn't exist at all on machines with strong memory ordering)
but protecting against it is practically free, so do that.
5. Remove useless state SYNC_REP_MUST_DISCONNECT, which isn't needed and
doesn't actually do anything.
There's still some further work needed here to make the behavior of fast
shutdown plausible, but that looks complex, so I'm leaving it for a
separate commit. Review by Fujii Masao.
It's not a good idea to kill the postmaster just because someone muffs
this, and it's not consistent with what we do for other, similar GUCs.
Fujii Masao, with a bit more hacking by me
SyncRepRequested() must check not only the value of the
synchronous_replication GUC but also whether max_wal_senders > 0.
Otherwise, we might end up waiting for sync rep even when there's no
possibility of a standby ever managing to connect. There are some
existing cross-checks to prevent this, but they're not quite sufficient:
the user can start the server with max_wal_senders=0,
synchronous_standby_names='', and synchronous_replication=off and then
subsequent make synchronous_standby_names not empty using pg_ctl reload,
and then SET synchronous_standby=on, leading to an indefinite hang.
Along the way, rename the global variable for the synchronous_replication
GUC to match the name of the GUC itself, for clarity.
Report by Fujii Masao, though I didn't use his patch.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
it a lot more useful for determining which standby is most up-to-date,
for example. There was long discussions on whether overwriting existing
existing WAL makes sense to begin with, and whether we should do some more
extensive variable renaming, but this change nevertheless seems quite
uncontroversial.
Fujii Masao, reviewed by Jeff Janes, Robert Haas, Stephen Frost.
Without this patch, when wal_receiver_status_interval=0, indicating that no
status messages should be sent, Hot Standby feedback messages are instead sent
extremely frequently.
Fujii Masao, with documentation changes by me.
Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
the standby has written, flushed, and applied the WAL. At the moment, this
is for informational purposes only, the values are only shown in
pg_stat_replication system view, but in the future they will also be needed
for synchronous replication.
Extracted from Simon riggs' synchronous replication patch by Robert Haas, with
some tweaking by me.
Specifying this option makes the server not wait for the
xlog to be archived, or emit a warning that it can't,
instead leaving the responsibility with the client.
This is useful when the log is being streamed using
the streaming protocol in parallel with the backup,
without having log archiving enabled.
Magnus Hagander