There are two functions that can be used in event triggers to get more
details about a rewrite happening on a relation. Both had a limited
documentation:
- pg_event_trigger_table_rewrite_reason() and
pg_event_trigger_table_rewrite_oid() were not mentioned in the main
event trigger section in the paragraph dedicated to the event
table_rewrite.
- pg_event_trigger_table_rewrite_reason() returns an integer which is a
bitmap of the reasons why a rewrite happens. There was no explanation
about the meaning of these values, forcing the reader to look at the
code to find out that these are defined in event_trigger.h.
While on it, let's add a comment in event_trigger.h where the
AT_REWRITE_* are defined, telling to update the documentation when
these values are changed.
Backpatch down to 13 as a consequence of 1ad23335f3, where this area
of the documentation has been heavily reworked.
Author: Greg Sabino Mullane
Discussion: https://postgr.es/m/CAKAnmmL+Z6j-C8dAx1tVrnBmZJu+BSoc68WSg3sR+CVNjBCqbw@mail.gmail.com
Backpatch-through: 13
Disabling enable_indexscan has always also disabled Index Only Scans.
Here we make that more clear in the documentation in an attempt to
prevent future complaints complaining about this expected behavior.
Reported-by: Melanie Plageman
Author: David G. Johnston, David Rowley
Backpatch-through: 12, oldest supported version
Discussion: https://postgr.es/m/CAAKRu_atV=kovgpaLREyG68PB5+ncKvJ2UNoeRetEgyC3Yb5Sw@mail.gmail.com
The present wording about viewing shared_memory_size_in_huge_pages
seems to suggest that the parameter cannot be viewed after startup
at all, whereas the intent is to make it clear that you can't use
"postgres -C" to view this parameter while the server is running.
This commit rephrases this section to remove the ambiguity.
Author: Seino Yuki
Reviewed-by: Michael Paquier, David G. Johnston, Fujii Masao
Discussion: https://postgr.es/m/420584fd274f9ec4f337da55ffb3b790%40oss.nttdata.com
Backpatch-through: 15
The fork name is always separated with the block number by an underscore
in the names of the files generated, but the docs stuck them together
without a separator, which was confusing.
Author: Christoph Berg
Discussion: https://postgr.es/m/ZvxtSLiix9eceMRM@msg.df7cb.de
Backpatch-through: 16
There were unnecessary non-breaking spaces (nbsp, U+00A0, 0xc2a0 in
UTF-8) in the docs. This commit replaces them with ASCII spaces
(0x20).
config.sgml is backpatched through 17.
ref/drop_extension.sgml is backpatched through 13.
Discussion: https://postgr.es/m/20240930.153404.202479334310259810.ishii%40postgresql.org
Reviewed-by: Yugo Nagata, Daniel Gustafsson
Backpatch-through: 17, 13
FYI, during PDF builds, this link type generates a "Unresolved ID
reference found" warning because it is suppressed from the PDF output.
Backpatch-through: 12
Since we introduced unlogged sequences in v15, identity sequences
have defaulted to having the same persistence as their owning table.
However, it is possible to change that with ALTER SEQUENCE, and
pg_dump tries to preserve the logged-ness of sequences when it doesn't
match (as indeed it wouldn't for an unlogged table from before v15).
The fly in the ointment is that ALTER SEQUENCE SET [UN]LOGGED fails
in binary-upgrade mode, because it needs to assign a new relfilenode
which we cannot permit in that mode. Thus, trying to pg_upgrade a
database containing a mismatching identity sequence failed.
To fix, add syntax to ADD/ALTER COLUMN GENERATED AS IDENTITY to allow
the sequence's persistence to be set correctly at creation, and use
that instead of ALTER SEQUENCE SET [UN]LOGGED in pg_dump. (I tried to
make SET [UN]LOGGED work without any pg_dump modifications, but that
seems too fragile to be a desirable answer. This way should be
markedly faster anyhow.)
In passing, document the previously-undocumented SEQUENCE NAME option
that pg_dump also relies on for identity sequences; I see no value
in trying to pretend it doesn't exist.
Per bug #18618 from Anthony Hsu.
Back-patch to v15 where we invented this stuff.
Discussion: https://postgr.es/m/18618-d4eb26d669ed110a@postgresql.org
Historically we've used timezone "PST8PDT", but the recent release
2024b of tzdb changes the definition of that zone in a way that
breaks many test cases concerned with dates before 1970. Although
we've not yet adopted 2024b into our own tree, this is already
problematic for people using --with-system-tzdata if their platform
has already adopted 2024b. To work with both older and newer
versions of tzdb, switch to using "America/Los_Angeles", accepting
the ensuing changes in regression test results.
Back-patch to all supported branches.
Per report and patch from Wolfgang Walther.
Discussion: https://postgr.es/m/0a997455-5aba-4cf2-a354-d26d8bcbfae6@technowledgy.de
A few recent JSON aggregates have been added without much consideration
to the existing order. Put these back in alphabetical order (with the
exception of the JSONB variant of each JSON aggregate).
Author: Wolfgang Walther <walther@technowledgy.de>
Reviewed-by: Marlene Reiterer <marlene.reiterer.03@gmail.com>
Discussion: https://postgr.es/m/6a7b910c-3feb-4006-b817-9b4759cb6bb6%40technowledgy.de
Backpatch-through: 16, where these aggregates were added
This change improves the description of the
restrict_nonsystem_relation_kind parameter in guc_table.c and the
documentation for better clarity.
Backpatch to 12, where this GUC parameter was introduced.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/6a96f1af-22b4-4a80-8161-1f26606b9ee2%40eisentraut.org
Backpatch-through: 12
The descriptions for ProcArrayGroupUpdate and XactGroupUpdate claim
that these events mean we are waiting for the group leader "at end
of a parallel operation," but neither pertains to parallel
operations. This commit reverts these descriptions to their
wording before commit 3048898e73, i.e., "end of a parallel
operation" is changed to "transaction end."
Author: Sameer Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAGPeHmh6UMrKQHKCmX%2B5vV5TH9P%3DKw9en3k68qEem6J%3DyrZPUA%40mail.gmail.com
Backpatch-through: 13
This section claims we use CRC-32 for WAL records and two-phase
state files, but we've actually used CRC-32C since v9.5 (commit
5028f22f6e). Fix that.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/ZrUFpLP-w2zTAHqq%40nathan
Backpatch-through: 12
When pg_dump retrieves the list of database objects and performs the
data dump, there was possibility that objects are replaced with others
of the same name, such as views, and access them. This vulnerability
could result in code execution with superuser privileges during the
pg_dump process.
This issue can arise when dumping data of sequences, foreign
tables (only 13 or later), or tables registered with a WHERE clause in
the extension configuration table.
To address this, pg_dump now utilizes the newly introduced
restrict_nonsystem_relation_kind GUC parameter to restrict the
accesses to non-system views and foreign tables during the dump
process. This new GUC parameter is added to back branches too, but
these changes do not require cluster recreation.
Back-patch to all supported branches.
Reviewed-by: Noah Misch
Security: CVE-2024-7348
Backpatch-through: 12
Prior to this commit, the docs for enable_partitionwise_aggregate and
enable_partitionwise_join mentioned the additional overheads enabling
these causes for the query planner, but they mentioned nothing about the
possible surge in work_mem-consuming executor nodes that could end up in
the final plan. Dimitrios reported the OOM killer intervened on his
query as a result of using enable_partitionwise_aggregate=on.
Here we adjust the docs to mention the possible increase in the number of
work_mem-consuming executor nodes that can appear in the final plan as a
result of enabling these GUCs.
Reported-by: Dimitrios Apostolou
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/3603c380-d094-136e-e333-610914fb3e80%40gmx.net
Discussion: https://postgr.es/m/CAApHDvoZ0_yqwPFEpb6h261L76BUpmh5GxBQq0LeRzQ5Jh3zzg@mail.gmail.com
Backpatch-through: 12, oldest supported version
We were not being clear about which variants of the "direction"
clause are permitted in MOVE. Also, the text seemed to be
written with only the FETCH/MOVE NEXT case in mind, so it
didn't apply very well to other variants.
Also, document that "MOVE count IN cursor" only works if count
is a constant. This is not the whole truth, because some other
cases such as a parenthesized expression will also work, but
we want to push people to use "MOVE FORWARD count" instead.
The constant case is enough to cover what we allow in plain SQL,
and that seems sufficient to claim support for.
Update a comment in pl_gram.y claiming that we don't document
that point.
Per gripe from Philipp Salvisberg.
Discussion: https://postgr.es/m/172155553388.702.7932496598218792085@wrigleys.postgresql.org
The I/O timing information collected when track_io_timing is
enabled is now documented to appear in the pg_stat_io view,
which was previously not mentioned.
This commit also enhances the description of track_io_timing
to clarify that it monitors not only block read and write
but also block extend and fsync operations. Additionally,
the description of track_wal_io_timing has been improved
to mention both WAL write and WAL fsync monitoring.
Backpatch to v16 where pg_stat_io was added.
Author: Hajime Matsunaga
Reviewed-by: Melanie Plageman, Nazir Bilal Yavuz, Fujii Masao
Discussion: https://postgr.es/m/TYWPR01MB10742EE4A6F34C33061429D38A4D52@TYWPR01MB10742.jpnprd01.prod.outlook.com
State explicitly that the coordinates in our geometric data types are
float8. Also explain that polygons store their bounding box.
While here, fix the table of geometric data types to show type
"line"'s size correctly: it's 24 bytes not 32. This has somehow
escaped notice since that table was made in 1998.
Per suggestion from Sebastian Skałacki. The size error seems
important enough to justify back-patching.
Discussion: https://postgr.es/m/172000045661.706.1822177575291548794@wrigleys.postgresql.org
The ssl_prefer_server_ciphers setting is quite important from a
security point of view, so simply stating that older versions
doesn't have it isn't very helpful. This adds the version when
the GUC was added to help readers.
Backpatch to all supported versions since this setting has been
around since 9.4.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/5D7E0F5E-E620-4D54-8788-66D421AC76F0@yesql.se
Backpatch-through: v12
If the CALL is within an atomic context (e.g. there's an outer
transaction block), _SPI_execute_plan should acquire a fresh snapshot
to execute any such functions with. We failed to do that and instead
passed them the Portal snapshot, which had been acquired at the start
of the current SQL command. This'd lead to seeing stale values of
rows modified since the start of the command.
This is arguably a bug in 84f5c2908: I failed to see that "are we in
non-atomic mode" needs to be defined the same way as it is further
down in _SPI_execute_plan, i.e. check !_SPI_current->atomic not just
options->allow_nonatomic. Alternatively the blame could be laid on
plpgsql, which is unconditionally passing allow_nonatomic = true
for CALL/DO even when it knows it's in an atomic context. However,
fixing it in spi.c seems like a better idea since that will also fix
the problem for any extensions that may have copied plpgsql's coding
pattern.
While here, update an obsolete comment about _SPI_execute_plan's
snapshot management.
Per report from Victor Yegorov. Back-patch to all supported versions.
Discussion: https://postgr.es/m/CAGnEboiRe+fG2QxuBO2390F7P8e2MQ6UyBjZSL_w1Cej+E4=Vw@mail.gmail.com
The documentation for POSIX semaphores is missing a reference to
max_wal_senders. This commit fixes that in the same way that
commit 4ebe51a5fb fixed the same issue in the documentation for
System V semaphores.
Discussion: https://postgr.es/m/20240517164452.GA1914161%40nathanxps13
Backpatch-through: 12
This HBA entry was using "local" while specifying an address, which was
incorrect. While in it, this adjusts the format of the entry to be
aligned with the surroundings.
Oversight in 8fea86830e.
Reported-by: Stéphane Schildknecht
Reviewed-by: David G. Johnston
Discussion: https://postgr.es/m/44662001-54c4-4bfd-be93-35e01ca25fa1@gmail.com
Backpatch-through: 16
The formulas for SEMMNI and SEMMNS do not include the archiver
process, which was converted to an auxiliary process in v14, and
the WAL summarizer process, which was introduced in v17. This
commit corrects these formulas and adds a missing reference to
max_wal_senders nearby. Since this section of the documentation
tends to be incorrect quite often, we should likely give up on
documenting the exact formulas in favor of something less fragile,
but that is left as a future exercise.
Reported-by: Sami Imseih
Reviewed-by: Sami Imseih
Discussion: https://postgr.es/m/20240517164452.GA1914161%40nathanxps13
Backpatch-through: 12
Parameter column_name must be an existing column because ALTER
MATERIALIZED VIEW cannot add new columns. The old description was
likely copied from ALTER TABLE.
Author: Erik Wienhold
Discussion: https://postgr.es/m/6880ca53-7961-4eeb-86d5-6bd05fc2027e@ewie.name
Backpatch-through: 12
Specifically, it terminates a background worker even if the caller
couldn't terminate the background worker with pg_terminate_backend().
Commit 3a9b18b309 neglected to update
this. Back-patch to v13, which introduced DROP DATABASE FORCE.
Reviewed by Amit Kapila. Reported by Kirill Reshke.
Discussion: https://postgr.es/m/20240429212756.60.nmisch@google.com
Presently, when this function is called for an unlogged sequence on
a standby server, it will error out with a message like
ERROR: could not open file "base/5/16388": No such file or directory
Since the pg_sequences system view uses pg_sequence_last_value(),
it can error similarly. To fix, modify the function to return NULL
for unlogged sequences on standby servers. Since this bug is
present on all versions since v15, this approach is preferable to
making the ERROR nicer because we need to repair the pg_sequences
view without modifying its definition on released versions. For
consistency, this commit also modifies the function to return NULL
for other sessions' temporary sequences. The pg_sequences view
already appropriately filters out such sequences, so there's no bug
there, but we might as well offer some defense in case someone
invokes this function directly.
Unlogged sequences were first introduced in v15, but temporary
sequences are much older, so while the fix for unlogged sequences
is only back-patched to v15, the temporary sequence portion is
back-patched to all supported versions.
We could also remove the privilege check in the pg_sequences view
definition in v18 if we modify this function to return NULL for
sequences for which the current user lacks privileges, but that is
left as a future exercise for when v18 development begins.
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20240501005730.GA594666%40nathanxps13
Backpatch-through: 12
The catalog view pg_stats_ext fails to consider privileges for
expression statistics. The catalog view pg_stats_ext_exprs fails
to consider privileges and row-level security policies. To fix,
restrict the data in these views to table owners or roles that
inherit privileges of the table owner. It may be possible to apply
less restrictive privilege checks in some cases, but that is left
as a future exercise. Furthermore, for pg_stats_ext_exprs, do not
return data for tables with row-level security enabled, as is
already done for pg_stats_ext.
On the back-branches, a fix-CVE-2024-4317.sql script is provided
that will install into the "share" directory. This file can be
used to apply the fix to existing clusters.
Bumps catversion on 'master' branch only.
Reported-by: Lukas Fittl
Reviewed-by: Noah Misch, Tomas Vondra, Tom Lane
Security: CVE-2024-4317
Backpatch-through: 14
Michael Paquier