than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
(SIGUSR1, which we have not been using recently) instead of piggybacking
on SIGUSR2-driven NOTIFY processing. This has several good results:
the processing needed to drain the sinval queue is a lot less than the
processing needed to answer a NOTIFY; there's less contention since we
don't have a bunch of backends all trying to acquire exclusive lock on
pg_listener; backends that are sitting inside a transaction block can
still drain the queue, whereas NOTIFY processing can't run if there's
an open transaction block. (This last is a fairly serious issue that
I don't think we ever recognized before --- with clients like JDBC that
tend to sit with open transaction blocks, the sinval queue draining
mechanism never really worked as intended, probably resulting in a lot
of useless cache-reset overhead.) This is the last of several proposed
changes in response to Philip Warner's recent report of sinval-induced
performance problems.
of VACUUM cases so that VACUUM requests don't affect the ARC state at all,
avoid corner case where BufferSync would uselessly rewrite a buffer that
no longer contains the page that was to be flushed. Make some minor
other cleanups in and around the bufmgr as well, such as moving PinBuffer
and UnpinBuffer into bufmgr.c where they really belong.
* Changes incorrect CYGWIN defines to __CYGWIN__
* Some localtime returns NULL checks (when unchecked cause SEGVs under
Win32
regression tests)
* Rationalized CreateSharedMemoryAndSemaphores and
AttachSharedMemoryAndSemaphores (Bruce, I finally remembered to do it);
requires attention.
Claudio Natoli
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
Natoli and Bruce Momjian (and some cosmetic fixes from Neil Conway).
Changes:
- remove duplicate signal definitions from pqsignal.h
- replace pqkill() with kill() and redefine kill() in Win32
- use ereport() in place of fprintf() in some error handling in
pqsignal.c
- export pg_queue_signal() and make use of it where necessary
- add a console control handler for Ctrl-C and similar handling
on Win32
- do WaitForSingleObjectEx() in CHECK_FOR_INTERRUPTS() on Win32;
query cancelling should now work on Win32
- various other fixes and cleanups
against the latest shapshot. It also includes the replacement of kill()
with pqkill() and sigsetmask() with pqsigsetmask().
Passes all tests fine on my linux machine once applied. Still doesn't
link completely on Win32 - there are a few things still required. But
much closer than before.
At Bruce's request, I'm goint to write up a README file about the method
of signals delivery chosen and why the others were rejected (basically a
summary of the mailinglist discussions). I'll finish that up once/if the
patch is accepted.
Magnus Hagander
PostmasterPid variable, which gets set (early) in PostmasterMain
getppid would not be the postmaster?
[fork/exec] Implements processCancelRequest by keeping an array of
pid/cancel_key structs in shared mem
[fork/exec] Moves AttachSharedMemoryAndSemaphores call for backends into
SubPostmasterMain
[win32] Implements reaper/waitpid by keeping an arrays of children
pids,handles in postmaster local mem
- this item is largely untested, for reasons which should be
obvious, but appears sound
[win32/all] Added extern for pgpipe in Win32 case, and changed the second
pipe call (which seems to have been missed earlier) to pgpipe
[win32] #define'd ftruncate to chsize in the Win32 case
[win32] PG_USLEEP for Win32 has a misplaced paren. Fixed.
[win32] DLLIMPORT handling for MingW case
Claudio Natoli
call. You'd think this would cause some problems, but because of the
way hash_create is coded, the only side-effect was creation of a useless
memory context for the hashtable.
commit, but I am adding it now so it is in CVS.]
The patch basically is a slight rearrangement of the code to allow
fork/exec on Unix, with the ultimate goal of doing CreateProcess on
Win32. The changes are:
o Write out postmaster global variables and per-backend
variables to be read by the exec'ed backend
o Mark some static variables as global when exec is used so
then can be dumped from postmaster.c, marked NON_EXEC_STATIC
o Remove value passing with -p now that we have per-backend
file
o Move some pointer storage out of shared memory for easier
dumping.
o Modified pgsql_temp directory cleanup to handle per-database
directories and the backend exec directory under datadir.
Claudio Natoli
method control structure, or a table of control structures.
. Use type LOCKMASK where an int is not a counter.
. Get rid of INVALID_TABLEID, use INVALID_LOCKMETHOD instead.
. Use INVALID_LOCKMETHOD instead of (LOCKMETHOD) NULL, because
LOCKMETHOD is not a pointer.
. Define and use macro LockMethodIsValid.
. Rename LOCKMETHOD to LOCKMETHODID.
. Remove global variable LongTermTableId in lmgr.c, because it is
never used.
. Make LockTableId static in lmgr.c, because it is used nowhere else.
Why not remove it and use DEFAULT_LOCKMETHOD?
. Rename the lock method control structure from LOCKMETHODTABLE to
LockMethodData. Introduce a pointer type named LockMethod.
. Remove elog(FATAL) after InitLockTable() call in
CreateSharedMemoryAndSemaphores(), because if something goes wrong,
there is elog(FATAL) in LockMethodTableInit(), and if this doesn't
help, an elog(ERROR) in InitLockTable() is promoted to FATAL.
. Make InitLockTable() void, because its only caller does not use its
return value any more.
. Rename variables in lock.c to avoid statements like
LockMethodTable[NumLockMethods] = lockMethodTable;
lockMethodTable = LockMethodTable[lockmethod];
. Change LOCKMETHODID type to uint16 to fit into struct LOCKTAG.
. Remove static variables BITS_OFF and BITS_ON from lock.c, because
I agree to this doubt:
* XXX is a fetch from a static array really faster than a shift?
. Define and use macros LOCKBIT_ON/OFF.
Manfred Koizar
memory say 'out of shared memory'; some were doing that and some just
said 'out of memory'. Also add a HINT about increasing max_locks_per_transaction
where relevant, per suggestion from Sean Chittenden. (The former change
does not break the strings freeze; the latter does, but I think it's
worth doing anyway.)
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
not just MAXALIGN boundaries. This makes a noticeable difference in
the speed of transfers to and from kernel space, at least on recent
Pentiums, and might help other CPUs too. We should look at making
this happen for local buffers and buffile.c too. Patch from Manfred Spraul.
free'd for every transaction or statement, respectively. This patch
puts these data structures into static memory, thus saving a few CPU
cycles and two malloc calls per transaction or (in isolation level
READ COMMITTED) per query.
Manfred Koizar
database access outside a transaction; revert bogus performance improvement
in SIBackendInit(); improve comments; add documentation (this part courtesy
Neil Conway).
connections by the superuser only.
This patch replaces the last patch I sent a couple of days ago.
It closes a connection that has not been authorised by a superuser if it would
leave less than the GUC variable ReservedBackends
(superuser_reserved_connections in postgres.conf) backend process slots free
in the SISeg. This differs to the first patch which only reserved the last
ReservedBackends slots in the procState array. This has made the free slot
test more expensive due to the use of a lock.
After thinking about a comment on the first patch I've also made it a fatal
error if the number of reserved slots is not less than the maximum number of
connections.
Nigel J. Andrews
copying into a fixed-size buffer (in this case, a buffer of
NAMEDATALEN bytes). AFAICT nothing to worry about here, but worth
fixing anyway...
Neil Conway
> Changes to avoid collisions with WIN32 & MFC names...
> 1. Renamed:
> a. PROC => PGPROC
> b. GetUserName() => GetUserNameFromId()
> c. GetCurrentTime() => GetCurrentDateTime()
> d. IGNORE => IGNORE_DTF in include/utils/datetime.h & utils/adt/datetim
>
> 2. Added _P to some lex/yacc tokens:
> CONST, CHAR, DELETE, FLOAT, GROUP, IN, OUT
Jan
transaction, so as to avoid returning them out of the index AM. Saves
repeated heap_fetch operations on frequently-updated rows. Also detect
queries on unique keys (equality to all columns of a unique index), and
don't bother continuing scan once we have found first match.
Killing is implemented in the btree and hash AMs, but not yet in rtree
or gist, because there isn't an equally convenient place to do it in
those AMs (the outer amgetnext routine can't do it without re-pinning
the index page).
Did some small cleanup on APIs of HeapTupleSatisfies, heap_fetch, and
index_insert to make this a little easier.
in snapshots, per my proposal of a few days ago. Also, tweak heapam.c
routines (heap_insert, heap_update, heap_delete, heap_mark4update) to
be passed the command ID to use, instead of doing GetCurrentCommandID.
For catalog updates they'll still get passed current command ID, but
for updates generated from the main executor they'll get passed the
command ID saved in the snapshot the query is using. This should fix
some corner cases associated with functions and triggers that advance
current command ID while an outer query is still in progress.
As proof of concept, provide an alternate implementation based on POSIX
semaphores. Also push the SysV shared-memory implementation into a
separate file so that it can be replaced conveniently.
for Solaris on SPARC. Scott Brunza (sbrunza@sonalysts.com) gets
credit for identifying the issue, making the change, and doing
the regression tests.
Earlier testing on 7.2rc2 and 7.2 showed performance gains of
1% to 10% on pgbench, osdb-pg, and some locally developed apps.
Solaris Intimate Shared Memory is described in "SOLARIS INTERNALS
Core Kernel Components" by Jim Mauro and Richard McDougall,
Copyright 2001 Sun Microsystem, Inc. ISBN 0-13-022496-0
P.J. "Josh" Rovero
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
Tom Lane