This commit comes as a continuation of the discussion that has led to
d522b05, as \v was handled inconsistently when parsing array values or
anything going through the parsers, and changing a parser behavior in
stable branches is a scary thing to do. The parsing of array values now
uses the more central scanner_isspace() and array_isspace() is removed.
As pointing out by Peter Eisentraut, fix a confusing reference to
horizontal space in the parsers with the term "horiz_space". \f was
included in this set since 3cfdd8f from 2000, but it is not horizontal.
"horiz_space" is renamed to "non_newline_space", to refer to all
whitespace characters except newlines.
The changes impact the parsers for the backend, psql, seg, cube, ecpg
and replication commands. Note that JSON should not escape \v, as per
RFC 7159, so these are not touched.
Reviewed-by: Peter Eisentraut, Tom Lane
Discussion: https://postgr.es/m/ZJKcjNwWHHvw9ksQ@paquier.xyz
This removes md5() function calls from these test suites:
- bloom
- test_decoding
- isolation
- recovery
- subscription
This covers all remaining test suites where md5() calls were just used
to generate some random data and can be replaced by appropriately
adapted sha256() calls. This will eventually allow these tests to
pass in OpenSSL FIPS mode (which does not allow MD5 use). See also
208bf364a9. Unlike for the main regression tests, I didn't write a
fipshash() wrapper here, because that would have been too repetitive
and wouldn't really save much here. In some cases it was easier to
remove one layer of indirection by changing column types from text to
bytea.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/f9b480b5-e473-d2d1-223a-4b9db30a229a@eisentraut.org
The tests of unaccent rely on UTF8 characters, and unlike any other test
suite in the tree (fuzzystrmatch, citext, hstore, etc.), they would fail
if run on a database that does not support UTF8 encoding.
This commit fixes the tests of unaccent so as these are skipped when run
on a database without UTF8 support, using the same method as the other
test suits based on \if, getdatabaseencoding() and an alternate output
file.
This has been broken for a long time, but nobody has complained about
that either, so no backpatch is done. This can be reproduced with
something like REGRESS_OPTS="--no-locale --encoding=sql_ascii", for
instance. To defend against that, this module's Makefile and
meson.build enforced a UTF8 encoding without locales, but it did not
offer protection for options given by REGRESS_OPTS. This switch makes
this regression test suite more consistent with all the others, as
well.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/ZIq1HUnIV2ksW85x@paquier.xyz
The test inserted 70k rows into a foreign table, in order to verify
correct behavior with more than 65535 parameters, and was added in
response to a bug report.
However, this is rather expensive, especially when running the tests
under valgrind, CLOBBER_CACHE_ALWAYS etc. It doesn't seem worth it to
keep running the test, so remove it from all branches (14+).
Backpatch-through: 14
Discussion: https://postgr.es/m/2131017.1623451468@sss.pgh.pa.us
The following changes are done:
- Addition of WaitEventBufferPin and WaitEventExtension, that hold a
list of wait events related to each category.
- Addition of two functions that encapsulate the list of wait events for
each category.
- Rename BUFFER_PIN to BUFFERPIN (only this wait event class used an
underscore, requiring a specific rule in the automation script).
These changes make a bit easier the automatic generation of all the code
and documentation related to wait events, as all the wait event
categories are now controlled by consistent structures and functions.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/c6f35117-4b20-4c78-1df5-d3056010dcf5@gmail.com
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
a316a3bc fixed the code in build_simpl_rel() that propagates
RelOptInfo.userid from parent to child rels so that it works
correctly for the child rels of a UNION ALL subquery rel, though
no tests were added in that commit. So do so here.
As noted in the discussion, coming up with a test case in the core
regression suite for this fix has turned out to be tricky, so the
test case is added to the postgres_fdw's suite instead.
postgresGetForeignRelSize()'s use of user mapping for the user
specified in RelOptInfo.userid makes it relatively easier to craft
a test case around.
Discussion: https://postgr.es/m/CA%2BHiwqH91GaFNXcXbLAM9L%3DzBwUmSyv699Mtv3i1_xtk9Xec_A%40mail.gmail.com
Backpatch-through: 16
Specify --no-locale and --encoding=UTF8 to be consistent with the
Makefile, which specifies NO_LOCALE=1. Fixes test for some locales
when meson is used and ICU is disabled. May have been an oversight in
e6927270cd.
Also switch argument order in unaccent/meson.build to make it
consistent in style.
Discussion: https://postgr.es/m/CABwTF4Wz41pNMJ9q3tpH=6mnvg6aopDU5Lzvers5=6=WJVekww@mail.gmail.com
Author: Gurjeet Singh
Author: Jeff Davis
As gist__int_ops stands in intarray, it is possible to store GiST
entries for leaf pages that can cause corruptions when decompressed.
Leaf nodes are stored as decompressed all the time by the compression
method, and the decompression method should map with that, retrieving
the contents of the page without doing any decompression. However, the
code authorized the insertion of leaf page data with a higher number of
array items than what can be supported, generating a NOTICE message to
inform about this matter (199 for a 8k page, for reference). When
calling the decompression method, a decompression would be attempted on
this leaf node item but the contents should be retrieved as they are.
The NOTICE message generated when dealing with the compression of a leaf
page and too many elements in the input array for gist__int_ops has been
introduced by 08ee64e, removing the marker stored in the array to track
if this is actually a leaf node. However, it also missed the fact that
the decompression path should do nothing for a leaf page. Hence, as the
code stand, a too-large array would be stored as uncompressed but the
decompression path would attempt a decompression rather that retrieving
the contents as they are.
This leads to various problems. First, even if 08ee64e tried to address
that, it is possible to do out-of-bound chunk writes with a large input
array, with the backend informing about that with WARNINGs. On
decompression, retrieving the stored leaf data would lead to incorrect
memory reads, leading to crashes or even worse.
Perhaps somebody would be interested in expanding the number of array
items that can be handled in a leaf page for this operator in the
future, which would require revisiting the choice done in 08ee64e, but
based on the lack of reports about this problem since 2005 it does not
look so. For now, this commit prevents the insertion of data for leaf
pages when using more array items that the code can handle on
decompression, switching the NOTICE message to an ERROR. If one wishes
to use more array items, gist__intbig_ops is an optional choice.
While on it, use ERRCODE_PROGRAM_LIMIT_EXCEEDED as error code when a
limit is reached, because that's what the module is facing in such
cases.
Author: Ankit Kumar Pandey, Alexander Lakhin
Reviewed-by: Richard Guo, Michael Paquier
Discussion: https://postgr.es/m/796b65c3-57b7-bddf-b0d5-a8afafb8b627@gmail.com
Discussion: https://postgr.es/m/17888-f72930e6b5ce8c14@postgresql.org
Backpatch-through: 11
isspace() can be locale-sensitive depending on the platform, causing
hstore to consider as whitespaces characters it should not see as such.
For example, U+0105, being decoded as 0xC4 0x85 in UTF-8, would be
discarded from the input given.
This problem is similar to 9ae2661, though it was missed that hstore
can also manipulate non-ASCII inputs, so replace the existing isspace()
calls with scanner_isspace().
This problem exists for a long time, so backpatch all the way down.
Author: Evan Jones
Discussion: https://postgr.es/m/CA+HWA9awUW0+RV_gO9r1ABZwGoZxPztcJxPy8vMFSTbTfi4jig@mail.gmail.com
Backpatch-through: 11
Split nbtree's _bt_getbuf function is two: code that read locks or write
locks existing pages remains in _bt_getbuf, while code that deals with
allocating new pages is moved to a new, dedicated function called
_bt_allocbuf. This simplifies most _bt_getbuf callers, since it is no
longer necessary for them to pass a heaprel argument. Many of the
changes to nbtree from commit 61b313e4 can be reverted. This minimizes
the divergence between HEAD/PostgreSQL 16 and earlier release branches.
_bt_allocbuf replaces the previous nbtree idiom of passing P_NEW to
_bt_getbuf. There are only 3 affected call sites, all of which continue
to pass a heaprel for recovery conflict purposes. Note that nbtree's
use of P_NEW was superficial; nbtree never actually relied on the P_NEW
code paths in bufmgr.c, so this change is strictly mechanical.
GiST already took the same approach; it has a dedicated function for
allocating new pages called gistNewBuffer(). That factor allowed commit
61b313e4 to make much more targeted changes to GiST.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wz=8Z9qY58bjm_7TAHgtW6RzZ5Ke62q5emdCEy9BAzwhmg@mail.gmail.com
While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
pg_base64_enc_len() and its clones overestimated the output
length by up to 2 bytes, as a result of sloppy thinking about
where to divide. No callers require a precise estimate, so
this has no consequences worse than palloc'ing a byte or two
more than necessary. We might as well get it right though.
This bug is very ancient, dating to commit 79d78bb26 which
added encode.c. (The other instances were presumably copied
from there.) Still, it doesn't quite seem worth back-patching.
Oleg Tselebrovskiy
Discussion: https://postgr.es/m/f94da55286a63022150bc266afdab754@postgrespro.ru
The GUC settings lc_collate and lc_ctype are from a time when those
locale settings were cluster-global. When those locale settings were
made per-database (PG 8.4), the settings were kept as read-only. As
of PG 15, you can use ICU as the per-database locale provider, so
examining these settings is already less meaningful and possibly
confusing, since you need to look into pg_database to find out what is
really happening, and they would likely become fully obsolete in the
future anyway.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://www.postgresql.org/message-id/696054d1-bc88-b6ab-129a-18b8bce6a6f0@enterprisedb.com
We've had multiple issues with the clause_is_computable_at logic that
I introduced in 2489d76c4: it's been known to accept more than one
clone of the same qual at the same plan node, and also to accept no
clones at all. It's looking impractical to get it 100% right on the
basis of the currently-stored information, so fix it by introducing a
new RestrictInfo field "incompatible_relids" that explicitly shows
which outer joins a given clone mustn't be pushed above.
In principle we could populate this field in every RestrictInfo, but
that would cost space and there doesn't presently seem to be a need
for it in general. Also, while deconstruct_distribute_oj_quals can
easily fill the field with the remaining members of the commutative
join set that it's considering, computing it in the general case
seems again pretty complicated. So for now, just fill it for
clone quals.
Along the way, fix a bug that may or may not be only latent:
equivclass.c was generating replacement clauses with is_pushed_down
and has_clone/is_clone markings that didn't match their
required_relids. This led me to conclude that leaving the clone flags
out of make_restrictinfo's purview wasn't such a great idea after all,
so add them.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs48EYi_9-pSd0ORes1kTmTeAjT4Q3gu49hJtYCbSn2JyeA@mail.gmail.com
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Non-leaf pages of GiST indexes contain key attributes, leaf pages
contain both key and non-key attributes, and gist_page_items() ignored
the handling of non-key attributes. This caused a few problems when
using gist_page_items() on a GiST index with INCLUDE:
- On a non-leaf page, the function would crash.
- On a leaf page, the function would work, but miss to display all the
values for included attributes.
This commit fixes gist_page_items() to handle such cases in a more
appropriate way, and now displays the values of key and non-key
attributes for each item separately in a style consistent with what
ruleutils.c would generate for the attribute list, depending on the page
type dealt with. In a way similar to how a record is displayed, values
would be double-quoted for key or non-key attributes if required.
ruleutils.c did not provide a routine able to control if non-key
attributes should be displayed, so an extended() routine for index
definitions is added to work around the leaf and non-leaf page
differences.
While on it, this commit fixes a third problem related to the amount of
data reported for key attributes. The code originally relied on
BuildIndexValueDescription() (used for error reports on constraints)
that would not print all the data stored in the index but the index
opclass's input type, so this limited the amount of information
available. This switch makes gist_page_items() much cheaper as there is
no need to run ACL checks for each item printed, which is not an issue
anyway as superuser rights are required to execute the functions of
pageinspect. Opclasses whose data cannot be displayed can rely on
gist_page_items_bytea().
The documentation of this function was slightly incorrect for the
output results generated on HEAD and v15, so adjust it on these
branches.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/17884-cb8c326522977acb@postgresql.org
Backpatch-through: 14
Commit 3581cbdcd6 added a flag to identify empty BRIN ranges. This adds
the new flag to brin_page_items() output.
This is kept as a separate commit as it should not be backpatched.
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
fuzzystrmatch's difference() function assumes that _soundex()
always initializes its output buffer fully. This was not so for
the case of a string containing no alphabetic characters, resulting
in unstable output and Valgrind complaints.
Fix by using memset() to fill the whole buffer in the early-exit
case. Also make some cosmetic improvements (I didn't care for the
random switches between "instr[0]" and "*instr" notation).
Report and diagnosis by Alexander Lakhin (bug #17935).
Back-patch to all supported branches.
Discussion: https://postgr.es/m/17935-b99316aa79c18513@postgresql.org
The two methods don't cooperate, so set_config_option("search_path",
...) has been ineffective under non-empty overrideStack. This defect
enabled an attacker having database-level CREATE privilege to execute
arbitrary code as the bootstrap superuser. While that particular attack
requires v13+ for the trusted extension attribute, other attacks are
feasible in all supported versions.
Standardize on the combination of NewGUCNestLevel() and
set_config_option("search_path", ...). It is newer than
PushOverrideSearchPath(), more-prevalent, and has no known
disadvantages. The "override" mechanism remains for now, for
compatibility with out-of-tree code. Users should update such code,
which likely suffers from the same sort of vulnerability closed here.
Back-patch to v11 (all supported versions).
Alexander Lakhin. Reported by Alexander Lakhin.
Security: CVE-2023-2454
Python 3 changed the behavior of PyMapping_Check(), breaking the
test in plpython_to_hstore() that verifies whether a function result
to be transformed is acceptable. A backwards-compatible fix is to
first verify that the object doesn't pass PySequence_Check().
Perhaps accidentally, our other uses of PyMapping_Check() already
follow uses of PySequence_Check(), so that no other bugs were
created by this change.
Per bug #17908 from Alexander Lakhin. Back-patch to all supported
branches.
Dmitry Dolgov and Tom Lane
Discussion: https://postgr.es/m/17908-3f19a125d56a11d6@postgresql.org
The leak would show up when using batch inserts with foreign tables
included in a partition tree, as the slots used in the batch were not
reset once processed. In order to fix this problem, some
ExecClearTuple() are added to clean up the slots used once a batch is
filled and processed, mapping with the number of slots currently in use
as tracked by the counter ri_NumSlots.
This buffer refcount leak has been introduced in b676ac4 with the
addition of the executor facility to improve bulk inserts for FDWs, so
backpatch down to 14.
Alexander has provided the patch (slightly modified by me). The test
for postgres_fdw comes from me, based on the test case that the author
has sent in the report.
Author: Alexander Pyhalov
Discussion: https://postgr.es/m/b035780a740efd38dc30790c76927255@postgrespro.ru
Backpatch-through: 14
Unaligned siglen could lead to an unaligned access to subsequent key fields.
Backpatch to 13, where opclass options were introduced.
Reported-by: Alexander Lakhin
Bug: 17847
Discussion: https://postgr.es/m/17847-171232970bea406b%40postgresql.org
Reviewed-by: Tom Lane, Pavel Borisov, Alexander Lakhin
Backpatch-through: 13
a9c70b46 added the statistics view pg_stat_io which contained columns
"io_context" and "io_object". Given that the columns are in the
pg_stat_io view, the "io" prefix is somewhat redundant, so remove it.
The code variables referring to these fields are kept unchanged so as
they can keep their context about I/O.
Bump catalog version.
Author: Melanie Plageman
Reviewed-by: Kyotaro Horiguchi, Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CAAKRu_aAQoJWrvT2BYYQvJChFKra_O-5ra3jhzKJZqWsTR1CPQ@mail.gmail.com
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
Commit d6b5dee42 failed to suppress that warning from MSVC,
so let's just get rid of all non-ASCII glyphs in the comments.
The comment for iso8859_1_to_ascii_upper[] is not essential,
and the other cases can be handled by spelling out the
Unicode character names.
(I'm now really in the dark as to why MSVC doesn't complain
about predicate.c's comment. But whatever.)
Discussion: https://postgr.es/m/1546512.1681495035@sss.pgh.pa.us
Buildfarm member hamerkop is unhappy that daitch_mokotoff.c "contains
a character that cannot be represented in the current code page
(932). Save the file in Unicode format to prevent data loss". There
are a lot of non-ASCII characters in comments, but I do not see any
outside a comment, so this is just cosmetic. Nonetheless the warning
is fairly scary and people might waste time trying to understand the
cause, so we ought to silence it.
We have only one other occurrence of a non-ASCII character in .c or .h
files in the tree: predicate.c mentions "Uwe Röhm". It's far from
clear why hamerkop isn't complaining about that too; but it isn't,
so maybe there is some special provision for accented Roman letters.
We can remove the non-letter symbols from the comment for
iso8859_1_to_ascii_upper without any real loss of usefulness,
so let's try that first to see if it silences the warning.
Discussion: https://postgr.es/m/1546512.1681495035@sss.pgh.pa.us
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
In order to have the option to use O_DIRECT/FILE_FLAG_NO_BUFFERING in a
later commit, we need the addresses of user space buffers to be well
aligned. The exact requirements vary by OS and file system (typically
sectors and/or memory pages). The address alignment size is set to
4096, which is enough for currently known systems: it matches modern
sectors and common memory page size. There is no standard governing
O_DIRECT's requirements so we might eventually have to reconsider this
with more information from the field or future systems.
Aligning I/O buffers on memory pages is also known to improve regular
buffered I/O performance.
Three classes of I/O buffers for regular data pages are adjusted:
(1) Heap buffers are now allocated with the new palloc_aligned() or
MemoryContextAllocAligned() functions introduced by commit 439f6175.
(2) Stack buffers now use a new struct PGIOAlignedBlock to respect
PG_IO_ALIGN_SIZE, if possible with this compiler. (3) The buffer
pool is also aligned in shared memory.
WAL buffers were already aligned on XLOG_BLCKSZ. It's possible for
XLOG_BLCKSZ to be configured smaller than PG_IO_ALIGNED_SIZE and thus
for O_DIRECT WAL writes to fail to be well aligned, but that's a
pre-existing condition and will be addressed by a later commit.
BufFiles are not yet addressed (there's no current plan to use O_DIRECT
for those, but they could potentially get some incidental speedup even
in plain buffered I/O operations through better alignment).
If we can't align stack objects suitably using the compiler extensions
we know about, we disable the use of O_DIRECT by setting PG_O_DIRECT to
0. This avoids the need to consider systems that have O_DIRECT but
can't align stack objects the way we want; such systems could in theory
be supported with more work but we don't currently know of any such
machines, so it's easier to pretend there is no O_DIRECT support
instead. That's an existing and tested class of system.
Add assertions that all buffers passed into smgrread(), smgrwrite() and
smgrextend() are correctly aligned, unless PG_O_DIRECT is 0 (= stack
alignment tricks may be unavailable) or the block size has been set too
small to allow arrays of buffers to be all aligned.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg@mail.gmail.com
Actually, the correct fix for this is "we don't need this at all",
because this program isn't dealing in any non-ASCII data. The
dependency on Data::Dumper seems to be a leftover too.
Discussion: https://postgr.es/m/3287943.1680922997@sss.pgh.pa.us
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
This modernized version of Soundex works significantly better than
the original, particularly for non-English names.
Dag Lem, reviewed by quite a few people along the way
Discussion: https://postgr.es/m/yger1atbgfy.fsf@sid.nimrod.no
This breaks out the background and interactive psql functionality into a
new class, PostgreSQL::Test::BackgroundPsql. Sessions are still initiated
via PostgreSQL::Test::Cluster, but once started they can be manipulated by
the new helper functions which intend to make querying easier. A sample
session for a command which can be expected to finish at a later time can
be seen below.
my $session = $node->background_psql('postgres');
$bsession->query_until(qr/start/, q(
\echo start
CREATE INDEX CONCURRENTLY idx ON t(a);
));
$bsession->quit;
Patch by Andres Freund with some additional hacking by me.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20230130194350.zj5v467x4jgqt3d6@awork3.anarazel.de
Michael Paquier