5983a4cff added CompactAttribute as an abbreviated alternative to
FormData_pg_attribute to allow more cache-friendly processing in tasks
related to TupleDescs. That commit contained some assert-only code to
check that the CompactAttribute had been populated correctly, however,
the method used to do that checking caused the TupleDesc's
CompactAttribute to be zeroed before it was repopulated and compared to
the snapshot taken before the memset call. This caused issues as the type
cache caches TupleDescs in shared memory which can be used by multiple
backend processes at the same time. There was a window of time between
the zero and repopulation of the CompactAttribute where another process
would mistakenly think that the CompactAttribute is invalid due to the
memset.
To fix this, instead of taking a snapshot of the CompactAttribute and
calling populate_compact_attribute() and comparing the snapshot to the
freshly populated TupleDesc's CompactAttribute, refactor things so we
can just populate a temporary CompactAttribute on the stack. This way
we don't touch the TupleDesc's memory.
Reported-by: Alexander Lakhin, SQLsmith
Discussion: https://postgr.es/m/ca3a256a-5d12-42db-aabe-a75a030d9fb9@gmail.com
Here we convert CompactAttribute.attalign from a char, which is directly
derived from pg_attribute.attalign into a uint8, which stores the number
of bytes to align the column's value by in the tuple.
This allows tuple deformation and tuple size calculations to move away
from using the inefficient att_align_nominal() macro, which manually
checks each TYPALIGN_* char to translate that into the alignment bytes
for the given type. Effectively, this commit changes those to TYPEALIGN
calls, which are branchless and only perform some simple arithmetic with
some bit-twiddling.
The removed branches were often mispredicted by CPUs, especially so in
real-world tables which often contain a mishmash of different types
with different alignment requirements.
Author: David Rowley
Reviewed-by: Andres Freund, Victor Yegorov
Discussion: https://postgr.es/m/CAApHDvrBztXP3yx=NKNmo3xwFAFhEdyPnvrDg3=M0RhDs+4vYw@mail.gmail.com
The new compact_attrs array stores a few select fields from
FormData_pg_attribute in a more compact way, using only 16 bytes per
column instead of the 104 bytes that FormData_pg_attribute uses. Using
CompactAttribute allows performance-critical operations such as tuple
deformation to be performed without looking at the FormData_pg_attribute
element in TupleDesc which means fewer cacheline accesses.
For some workloads, tuple deformation can be the most CPU intensive part
of processing the query. Some testing with 16 columns on a table
where the first column is variable length showed around a 10% increase in
transactions per second for an OLAP type query performing aggregation on
the 16th column. However, in certain cases, the increases were much
higher, up to ~25% on one AMD Zen4 machine.
This also makes pg_attribute.attcacheoff redundant. A follow-on commit
will remove it, thus shrinking the FormData_pg_attribute struct by 4
bytes.
Author: David Rowley
Reviewed-by: Andres Freund, Victor Yegorov
Discussion: https://postgr.es/m/CAApHDvrBztXP3yx=NKNmo3xwFAFhEdyPnvrDg3=M0RhDs+4vYw@mail.gmail.com
The new compact_attrs array stores a few select fields from
FormData_pg_attribute in a more compact way, using only 16 bytes per
column instead of the 104 bytes that FormData_pg_attribute uses. Using
CompactAttribute allows performance-critical operations such as tuple
deformation to be performed without looking at the FormData_pg_attribute
element in TupleDesc which means fewer cacheline accesses. With this
change, NAMEDATALEN could be increased with a much smaller negative impact
on performance.
For some workloads, tuple deformation can be the most CPU intensive part
of processing the query. Some testing with 16 columns on a table
where the first column is variable length showed around a 10% increase in
transactions per second for an OLAP type query performing aggregation on
the 16th column. However, in certain cases, the increases were much
higher, up to ~25% on one AMD Zen4 machine.
This also makes pg_attribute.attcacheoff redundant. A follow-on commit
will remove it, thus shrinking the FormData_pg_attribute struct by 4
bytes.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvrBztXP3yx=NKNmo3xwFAFhEdyPnvrDg3=M0RhDs+4vYw@mail.gmail.com
Reviewed-by: Andres Freund, Victor Yegorov
This introduces a new function equalRowTypes() that is effectively a
subset of equalTupleDescs() but only compares the number of attributes
and attribute name, type, typmod, and collation. This is enough for
most existing uses of equalTupleDescs(), which are changed to use the
new function. The only remaining callers of equalTupleDescs() are
those that really want to check the full tuple descriptor as such,
without concern about record or row or record type semantics.
The existing function hashTupleDesc() is renamed to hashRowType(),
because it now corresponds more to equalRowTypes().
The purpose of this change is to be clearer about the semantics of the
equality asked for by each caller. (At least one caller had a comment
that questioned whether equalTupleDescs() was too restrictive.) For
example, 4f622503d6 removed attstattarget from the tuple descriptor
structure. It was not fully clear at the time how this should affect
equalTupleDescs(). Now the answer is clear: By their own definitions,
equalRowTypes() does not care, and equalTupleDescs() just compares
whatever is in the tuple descriptor but does not care why it is in
there.
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/f656d6d9-6660-4518-a006-2f65cafbebd1%40eisentraut.org
This changes the pg_attribute field attstattarget into a nullable
field in the variable-length part of the row. If no value is set by
the user for attstattarget, it is now null instead of previously -1.
This saves space in pg_attribute and tuple descriptors for most
practical scenarios. (ATTRIBUTE_FIXED_PART_SIZE is reduced from 108
to 104.) Also, null is the semantically more correct value.
The ANALYZE code internally continues to represent the default
statistics target by -1, so that that code can avoid having to deal
with null values. But that is now contained to the ANALYZE code.
Only the DDL code deals with attstattarget possibly null.
For system columns, the field is now always null. The ANALYZE code
skips system columns anyway.
To set a column's statistics target to the default value, the new
command form ALTER TABLE ... SET STATISTICS DEFAULT can be used. (SET
STATISTICS -1 still works.)
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/4da8d211-d54d-44b9-9847-f2a9f1184c76@eisentraut.org
Instead of having a separate array/hash for each resource kind, use a
single array and hash to hold all kinds of resources. This makes it
possible to introduce new resource "kinds" without having to modify
the ResourceOwnerData struct. In particular, this makes it possible
for extensions to register custom resource kinds.
The old approach was to have a small array of resources of each kind,
and if it fills up, switch to a hash table. The new approach also uses
an array and a hash, but now the array and the hash are used at the
same time. The array is used to hold the recently added resources, and
when it fills up, they are moved to the hash. This keeps the access to
recent entries fast, even when there are a lot of long-held resources.
All the resource-specific ResourceOwnerEnlarge*(),
ResourceOwnerRemember*(), and ResourceOwnerForget*() functions have
been replaced with three generic functions that take resource kind as
argument. For convenience, we still define resource-specific wrapper
macros around the generic functions with the old names, but they are
now defined in the source files that use those resource kinds.
The release callback no longer needs to call ResourceOwnerForget on
the resource being released. ResourceOwnerRelease unregisters the
resource from the owner before calling the callback. That needed some
changes in bufmgr.c and some other files, where releasing the
resources previously always called ResourceOwnerForget.
Each resource kind specifies a release priority, and
ResourceOwnerReleaseAll releases the resources in priority order. To
make that possible, we have to restrict what you can do between
phases. After calling ResourceOwnerRelease(), you are no longer
allowed to remember any more resources in it or to forget any
previously remembered resources by calling ResourceOwnerForget. There
was one case where that was done previously. At subtransaction commit,
AtEOSubXact_Inval() would handle the invalidation messages and call
RelationFlushRelation(), which temporarily increased the reference
count on the relation being flushed. We now switch to the parent
subtransaction's resource owner before calling AtEOSubXact_Inval(), so
that there is a valid ResourceOwner to temporarily hold that relcache
reference.
Other end-of-xact routines make similar calls to AtEOXact_Inval()
between release phases, but I didn't see any regression test failures
from those, so I'm not sure if they could reach a codepath that needs
remembering extra resources.
There were two exceptions to how the resource leak WARNINGs on commit
were printed previously: llvmjit silently released the context without
printing the warning, and a leaked buffer io triggered a PANIC. Now
everything prints a WARNING, including those cases.
Add tests in src/test/modules/test_resowner.
Reviewed-by: Aleksander Alekseev, Michael Paquier, Julien Rouhaud
Reviewed-by: Kyotaro Horiguchi, Hayato Kuroda, Álvaro Herrera, Zhihong Yu
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://www.postgresql.org/message-id/cbfabeb0-cd3c-e951-a572-19b365ed314d%40iki.fi
BuildDescForRelation() main job is to convert ColumnDef lists to
pg_attribute/tuple descriptor arrays, which is really mostly an
internal subroutine of DefineRelation() and some related functions,
which is more the remit of tablecmds.c and doesn't have much to do
with the basic tuple descriptor interfaces in tupdesc.c. This is also
supported by observing the header includes we can remove in tupdesc.c.
By moving it over, we can also (in the future) make
BuildDescForRelation() use more internals of tablecmds.c that are not
sensible to be exposed in tupdesc.c.
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da@eisentraut.org
This unifies some repetitive code.
Note: I didn't push the "not found" error message into the new
function, even though all existing callers would be able to make use
of it. Using the existing error handling as-is would probably require
exposing the Relation type via tupdesc.h, which doesn't seem
desirable. (Or even if we changed it to just report the OID, it would
inject the concept of a relation containing the tuple descriptor into
tupdesc.h, which might be a layering violation. Perhaps some further
improvements could be considered here separately.)
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da%40eisentraut.org
Change the columns attndims, attstattarget, and attinhcount from int32
to int16, and reorder a bit. This saves some space (currently 4
bytes) in pg_attribute and tuple descriptors, which translates into
small performance benefits and/or room for new columns in pg_attribute
needed by future features.
attndims and attinhcount are never realistically used with values
larger than int16. Just to be sure, add some overflow checks.
attstattarget is currently limited explicitly to 10000.
For consistency, pg_constraint.coninhcount is also changed like
attinhcount.
Discussion: https://www.postgresql.org/message-id/flat/d07ffc2b-e0e8-77f7-38fb-be921dff71af%40enterprisedb.com
Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Various places wanted to point out that tuple descriptors don't
contain the variable-length fields of pg_attribute. This started when
attacl was added, but more fields have been added since, and these
comments haven't been kept up to date consistently. Reword so that
the purpose is clearer and we don't have to keep updating them.
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
Now that attcompression is just a char, there's a lot of wasted
padding space after it. Move it into the group of char-wide
columns to save a net of 4 bytes per pg_attribute entry. While
we're at it, swap the order of attstorage and attalign to make for
a more logical grouping of these columns.
Also re-order actions in related code to match the new field ordering.
This patch also fixes one outright bug: equalTupleDescs() failed to
compare attcompression. That could, for example, cause relcache
reload to fail to adopt a new value following a change.
Michael Paquier and Tom Lane, per a gripe from Andres Freund.
Discussion: https://postgr.es/m/20210517204803.iyk5wwvwgtjcmc5w@alap3.anarazel.de
Andrew Gierth reported that it's possible to crash the backend if no
pg_attrdef record is found to match an attribute that has atthasdef set.
AttrDefaultFetch warns about this situation, but then leaves behind
a relation tupdesc that has null "adbin" pointer(s), which most places
don't guard against.
We considered promoting the warning to an error, but throwing errors
during relcache load is pretty drastic: it effectively locks one out
of using the relation at all. What seems better is to leave the
load-time behavior as a warning, but then throw an error in any code
path that wants to use a default and can't find it. This confines
the error to a subset of INSERT/UPDATE operations on the table, and
in particular will at least allow a pg_dump to succeed.
Also, we should fix AttrDefaultFetch to not leave any null pointers
in the tupdesc, because that just creates an untested bug hazard.
While at it, apply the same philosophy of "warn at load, throw error
only upon use of the known-missing info" to CHECK constraints.
CheckConstraintFetch is very nearly the same logic as AttrDefaultFetch,
but for reasons lost in the mists of time, it was throwing ERROR for
the same cases that AttrDefaultFetch treats as WARNING. Make the two
functions more nearly alike.
In passing, get rid of potentially-O(N^2) loops in equalTupleDesc
by making AttrDefaultFetch sort the entries after fetching them,
so that equalTupleDesc can assume that entries in two equal tupdescs
must be in matching order. (CheckConstraintFetch already was sorting
CHECK constraints, but equalTupleDesc hadn't been told about it.)
There's some argument for back-patching this, but with such a small
number of field reports, I'm content to fix it in HEAD.
Discussion: https://postgr.es/m/87pmzaq4gx.fsf@news-spur.riddles.org.uk
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
This is an SQL-standard feature that allows creating columns that are
computed from expressions rather than assigned, similar to a view or
materialized view but on a column basis.
This implements one kind of generated column: stored (computed on
write). Another kind, virtual (computed on read), is planned for the
future, and some room is left for it.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com
... as well as its implementation from backend/access/hash/hashfunc.c to
backend/utils/hash/hashfn.c.
access/hash is the place for the hash index AM, not really appropriate
for generic facilities, which is what hash_any is; having things the old
way meant that anything using hash_any had to include the AM's include
file, pointlessly polluting its namespace with unrelated, unnecessary
cruft.
Also move the HTEqual strategy number to access/stratnum.h from
access/hash.h.
To avoid breaking third-party extension code, add an #include
"utils/hashutils.h" to access/hash.h. (An easily removed line by
committers who enjoy their asbestos suits to protect them from angry
extension authors.)
Discussion: https://postgr.es/m/201901251935.ser5e4h6djt2@alvherre.pgsql
We have forboth() and forthree() macros that simplify iterating
through several parallel lists, but not everyplace that could
reasonably use those was doing so. Also invent forfour() and
forfive() macros to do the same for four or five parallel lists,
and use those where applicable.
The immediate motivation for doing this is to reduce the number
of ad-hoc lnext() calls, to reduce the footprint of a WIP patch.
However, it seems like good cleanup and error-proofing anyway;
the places that were combining forthree() with a manually iterated
loop seem particularly illegible and bug-prone.
There was some speculation about restructuring related parsetree
representations to reduce the need for parallel list chasing of
this sort. Perhaps that's a win, or perhaps not, but in any case
it would be considerably more invasive than this patch; and it's
not particularly related to my immediate goal of improving the
List infrastructure. So I'll leave that question for another day.
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
We usually don't change the name of structs between the struct name
itself and the name of the typedef. Additionally, structs that are
usually used via a typedef that hides being a pointer, are commonly
suffixed Data. Change tupdesc code to follow those convention.
This is triggered by a future patch that intends to forward declare
TupleDescData in another header - keeping with the naming scheme makes
that easier to understand.
Author: Andres Freund
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
Previously, it would just pass back a partially-uninitialized tupdesc,
which doesn't seem like a safe or useful behavior.
Backpatch to v10 where this code came in.
Discussion: https://postgr.es/m/30830.1544384975@sss.pgh.pa.us
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.
Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.
The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g. catalog relations) NULL can be passed for this
argument.
Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.
Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com
TupleDescCopy needs to have the same effects as CreateTupleDescCopy in
that, since it doesn't copy constraints, it should clear the per-attribute
fields associated with them. Oversight in commit cc5f81366.
Since TupleDescCopy has already established the presumption that it
can just flat-copy the entire attribute array in one go, propagate
that approach into CreateTupleDescCopy and CreateTupleDescCopyConstr.
(I'm suspicious that this would lead to valgrind complaints if we
had any trailing padding in the struct, but we do not, and anyway
fixing that seems like a job for a separate commit.)
Add some better comments.
Thomas Munro, reviewed by Vik Fearing, some additional hacking by me
Discussion: https://postgr.es/m/CAEepm=0NvOGZ8B6GbQyQe2C_c2m3LKJ9w=8OMBaYRLgZ_Gw6Nw@mail.gmail.com
Tuples can have type RECORDOID and a typmod number that identifies a blessed
TupleDesc in a backend-private cache. To support the sharing of such tuples
through shared memory and temporary files, provide a typmod registry in
shared memory.
To achieve that, introduce per-session DSM segments, created on demand when a
backend first runs a parallel query. The per-session DSM segment has a
table-of-contents just like the per-query DSM segment, and initially the
contents are a shared record typmod registry and a DSA area to provide the
space it needs to grow.
State relating to the current session is accessed via a Session object
reached through global variable CurrentSession that may require significant
redesign further down the road as we figure out what else needs to be shared
or remodelled.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Previously, tuple descriptors were stored in chains keyed by a fixed size
array of OIDs. That meant there were effectively two levels of collision
chain -- one inside and one outside the hash table. Instead, let dynahash.c
look after conflicts for us by supplying a proper hash and equal function
pair.
This is a nice cleanup on its own, but also simplifies followup
changes allowing blessed TupleDescs to be shared between backends
participating in parallel query.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm%3D34GVhOL%2BarUx56yx7OPk7%3DqpGsv3CpO54feqjAwQKm5g%40mail.gmail.com
TupleDesc's attributes were already stored in contiguous memory after the
struct. Go one step further and get rid of the array of pointers to
attributes so that they can be stored in shared memory mapped at different
addresses in each backend. This won't work for TupleDescs with contraints
and defaults, since those point to other objects, but for many purposes
only attributes are needed.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
This is the SQL standard-conforming variant of PostgreSQL's serial
columns. It fixes a few usability issues that serial columns have:
- CREATE TABLE / LIKE copies default but refers to same sequence
- cannot add/drop serialness with ALTER TABLE
- dropping default does not drop sequence
- need to grant separate privileges to sequence
- other slight weirdnesses because serial is some kind of special macro
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
This is useful infrastructure for an upcoming proposed patch to
allow the WAL segment size to be changed at initdb time; tools like
pg_basebackup need the ability to interrogate the server setting.
But it also doesn't seem like a bad thing to have independently of
that; it may find other uses in the future.
Robert Haas and Beena Emerson. (The original patch here was by
Beena, but I rewrote it to such a degree that most of the code
being committed here is mine.)
Discussion: http://postgr.es/m/CA+TgmobNo4qz06wHEmy9DszAre3dYx-WNhHSCbU9SAwf+9Ft6g@mail.gmail.com
Bruce Momjian