If you take a base backup from a standby server with "pg_basebackup -X
fetch", and the timeline switches while the backup is being taken, the
backup used to fail with an error "requested WAL segment %s has already
been removed". This is because the server-side code that sends over the
required WAL files would not construct the WAL filename with the correct
timeline after a switch.
Fix that by using readdir() to scan pg_xlog for all the WAL segments in the
range, regardless of timeline.
Also, include all timeline history files in the backup, if taken with
"-X fetch". That fixes another related bug: If a timeline switch happened
just before the backup was initiated in a standby, the WAL segment
containing the initial checkpoint record contains WAL from the older
timeline too. Recovery will not accept that without a timeline history file
that lists the older timeline.
Backpatch to 9.2. Versions prior to that were not affected as you could not
take a base backup from a standby before 9.2.
Streaming replication can fetch any missing timeline history files from the
master, but recovery would read the timeline history file for the target
timeline before reading the checkpoint record, and before walreceiver has
had a chance to fetch it from the master. Delay reading it, and the sanity
checks involving timeline history, until after reading the checkpoint
record.
There is at least one scenario where this makes a difference: if you take
a base backup from a standby server right after a timeline switch, the
WAL segment containing the initial checkpoint record will begin with an
older timeline ID. Without the timeline history file, recovering that file
will fail as the older timeline ID is not recognized to be an ancestor of
the target timeline. If you try to recover from such a backup, using only
streaming replication to fetch the WAL, this patch is required for that to
work.
... not on auxiliary processes. I managed to overlook the fact that I
had disabled assertions on my HEAD checkout long ago.
Hopefully this will turn the buildfarm green again, and put an end to
today's silliness.
This makes it possible to include them only where they are used, so
we can avoid the conflict of the uid_t and gid_t datatypes that happened
in plperl (since plperl doesn't need the tar functions)
Commit da07a1e8 was broken for EXEC_BACKEND because I failed to realize
that the MaxBackends recomputation needed to be duplicated by
subprocesses in SubPostmasterMain. However, instead of having the value
be recomputed at all, it's better to assign the correct value at
postmaster initialization time, and have it be propagated to exec'ed
backends via BackendParameters.
MaxBackends stays as zero until after modules in
shared_preload_libraries have had a chance to register bgworkers, since
the value is going to be untrustworthy till that's finished.
Heikki Linnakangas and Álvaro Herrera
After receiving some WAL over streaming replication, try to open the file
from the timeline we're currently recieving, not recoveryTargetTLI. They
are usually the same, which is why wasn't noticed before, but you'd get
an error if there have been more than one timeline switch between the
current point in WAL and the recovery target.
Move some of the tar functionality that existed mostly duplicated
in both pg_dump and the walsender basebackup functionality into
port/tar.c instead, so it can be used from both. It will also be
used by pg_basebackup in the future, which would've caused a third
copy of it around.
Zoltan Boszormenyi and Magnus Hagander
In commit 11e131854f, we improved the
rule/view dumping code so that it would produce valid query representations
even if some of the tables involved in a query had been renamed since the
query was parsed. This patch extends that idea to fix problems that occur
when individual columns are renamed, or added or dropped. As before, the
core of the fix is to assign unique new aliases when a name conflict has
been created. This is complicated by the JOIN USING feature, which
requires the same column alias to be used in both input relations, but we
can handle that with a sufficiently complex approach to assigning aliases.
A fortiori, this patch takes care of situations where the query didn't have
unique column names to begin with, such as in a recent complaint from Bryan
Nuse. (Because of expansion of "SELECT *", re-parsing a dumped query can
require column name uniqueness even though the original text did not.)
The cascading standby patch in 9.2 changed the way WAL files are treated
when restored from the archive. Before, they were restored under a temporary
filename, and not kept in pg_xlog, but after the patch, they were copied
under pg_xlog. This is necessary for a cascading standby to find them, but
it also means that if the archive goes offline and a standby is restarted,
it can recover back to where it was using the files in pg_xlog. It also
means that if you take an offline backup from a standby server, it includes
all the required WAL files in pg_xlog.
However, the same change was not made to timeline history files, so if the
WAL segment containing the checkpoint record contains a timeline switch, you
will still get an error if you try to restart recovery without the archive,
or recover from an offline backup taken from the standby.
With this patch, timeline history files restored from archive are copied
into pg_xlog like WAL files are, so that pg_xlog contains all the files
required to recover. This is a corner-case pre-existing issue in 9.2, but
even more important in master where it's possible for a standby to follow a
timeline switch through streaming replication. To make that possible, the
timeline history files must be present in pg_xlog.
This is again intended to support extensions to the event trigger
functionality. This may go a bit further than we need for that
purpose, but there's some value in being consistent, and the OID
may be useful for other purposes also.
Dimitri Fontaine
This gets rid of XLByteLT, XLByteLE, XLByteEQ and XLByteAdvance.
These were useful for brevity when XLogRecPtrs were split in
xlogid/xrecoff; but now that they are simple uint64's, they are just
clutter. The only downside to making this change would be ease of
backporting patches, but that has been negated by other substantive
changes to the involved code anyway. The clarity of simpler expressions
makes the change worthwhile.
Most of the changes are mechanical, but in a couple of places, the patch
author chose to invert the operator sense, making the code flow more
logical (and more in line with preceding comments).
Author: Andres Freund
Eyeballed by Dimitri Fontaine and Alvaro Herrera
Code review for commit 2f582f76b1945929ff07116cd4639747ce9bb8a1: don't use
a static variable for what ought to be a deparse_context field, fix
non-multibyte-safe test for spaces, avoid useless and potentially O(N^2)
(though admittedly with a very small constant) calculations of wrap
positions when we aren't going to wrap.
Ensure comments accurately reflect state of code
given new understanding, and recent changes.
Include example code from Noah Misch to
illustrate how rd_newRelfilenodeSubid can be
reset deterministically. No code changes.
Teach RelationCacheInvalidate() to keep rd_newRelfilenodeSubid across rel cache
message overflows, so that behaviour is now fully deterministic.
Noah Misch
Extracted from a larger patch by Dimitri Fontaine. It is hoped that
this will provide infrastructure for enriching the new event trigger
functionality, but it seems possibly useful for other purposes as
well.
transformExpr() is required to cope with already-transformed expression
trees, for various ugly-but-not-quite-worth-cleaning-up reasons. However,
some of its newer subroutines hadn't gotten the memo. This accounts for
bug #7763 from Norbert Buchmuller: transformRowExpr() was overwriting the
previously determined type of a RowExpr during CREATE TABLE LIKE INCLUDING
INDEXES. Additional investigation showed that transformXmlExpr had the
same kind of problem, but all the other cases seem to be safe.
Andres Freund and Tom Lane
Here's another attempt at fixing the logic that decides how far the WAL can
be streamed, which was still broken if the timeline changed while streaming.
You would get an assertion failure. The way the logic is now written is more
readable, too.
Thom Brown reported the assertion failure.
If a relation file was removed when the server-side counterpart of
pg_basebackup was just about to open it to send it to the client, you'd
get a "could not open file" error. Fix that.
Backpatch to 9.1, this goes back to when pg_basebackup was introduced.
If pg_extension_config_dump() is executed again for a table already listed
in the extension's extconfig, the code was blindly making a new array entry.
This does not seem useful. Fix it to replace the existing array entry
instead, so that it's possible for extension update scripts to alter the
filter conditions for configuration tables.
In addition, teach ALTER EXTENSION DROP TABLE to check for an extconfig
entry for the target table, and remove it if present. This is not a 100%
solution because it's allowed for an extension update script to just
summarily DROP a member table, and that code path doesn't go through
ExecAlterExtensionContentsStmt. We could probably make that case clean
things up if we had to, but it would involve sticking a very ugly wart
somewhere in the guts of dependency.c. Since on the whole it seems quite
unlikely that extension updates would want to remove pre-existing
configuration tables, making the case possible with an explicit command
seems sufficient.
Per bug #7756 from Regina Obe. Back-patch to 9.1 where extensions were
introduced.
This was broken before, we would recycle old WAL segments on wrong timeline
after the recovery target timeline had changed, but my recent commit to
not initialize ThisTimeLineID at all in a standby's checkpointer process
broke this completely.
The problem is that when installing a recycled WAL segment as a future one,
ThisTimeLineID is used to construct the filename. To fix, always update
ThisTimeLineID to the current timeline being recovered, before recycling
WAL segments at a restartpoint.
This still leaves a small window where we might install WAL segments under
wrong timeline ID, if the timeline is changed just as we're about to start
recycling. Also, even if we're replaying timeline X at the momnent, there's
no guarantee that we'll need as many WAL segments on that timeline as we
recycle. We might be just about to reach the point where we switch to next
timeline, so might only need one more WAL segment on the current timeline.
We'll live with the waste in that situation.
Bug pointed out by Fujii Masao. 9.1 and 9.2 had the same issue, when
recovery target timeline was changed, but I committed a slightly different
version of this patch on those branches.
Because the client encoding might not match the server encoding,
pg_upgrade can't allocate NAMEDATALEN bytes for storage of database,
relation, and namespace identifiers. Instead pg_strdup() the memory and
free it.
Also add C comment in initdb.c about safe NAMEDATALEN usage.
Most of the time, the last replayed record comes from the recovery target
timeline, but there is a corner case where it makes a difference. When
the startup process scans for a new timeline, and decides to change recovery
target timeline, there is a window where the recovery target TLI has already
been bumped, but there are no WAL segments from the new timeline in pg_xlog
yet. For example, if we have just replayed up to point 0/30002D8, on
timeline 1, there is a WAL file called 000000010000000000000003 in pg_xlog
that contains the WAL up to that point. When recovery switches recovery
target timeline to 2, a walsender can immediately try to read WAL from
0/30002D8, from timeline 2, so it will try to open WAL file
000000020000000000000003. However, that doesn't exist yet - the startup
process hasn't copied that file from the archive yet nor has the walreceiver
streamed it yet, so walsender fails with error "requested WAL segment
000000020000000000000003 has already been removed". That's harmless, in that
the standby will try to reconnect later and by that time the segment is
already created, but error messages that should be ignored are not good.
To fix that, have walsender track the TLI of the last replayed record,
instead of the recovery target timeline. That way walsender will not try to
read anything from timeline 2, until the WAL segment has been created and at
least one record has been replayed from it. The recovery target timeline is
now xlog.c's internal affair, it doesn't need to be exposed in shared memory
anymore.
This fixes the error reported by Thom Brown. depesz the same error message,
but I'm not sure if this fixes his scenario.
We used to set it to the current recovery target timeline, but the recovery
target timeline can change during recovery, leaving ThisTimeLineID at an
old value. That seems worse than always leaving it at zero to begin with.
AFAICS there was no good reason to set it in the first place. ThisTimeLineID
is not needed in checkpointer or bgwriter process, until it's time to write
the end-of-recovery checkpoint, and at that point ThisTimeLineID is updated
anyway.
If you restored from a backup taken from a standby, and the last record in
the backup is the checkpoint record, ie. there is no redo required except
for the checkpoint record, we would fail to notice that we've reached the
end-of-backup point, and the database is consistent. The result was an
error "WAL ends before end of online backup". To fix, move the
have-we-reached-end-of-backup check into CheckRecoveryConsistency(), which
is already responsible for similar checks with minRecoveryPoint, and is
called in the right places.
Backpatch to 9.2, this check and bug did not exist before that.
This was used in a time when a shared libperl or libpython was difficult
to come by. That is obsolete, and the idea behind the flag was never
fully portable anyway and will likely fail on more modern CPU
architectures.
During crash recovery, we remove disk files belonging to temporary tables,
but the system catalog entries for such tables are intentionally not
cleaned up right away. Instead, the first backend that uses a temp schema
is expected to clean out any leftover objects therein. This approach
requires that we be careful to ignore leftover temp tables (since any
actual access attempt would fail), *even if their BackendId matches our
session*, if we have not yet established use of the session's corresponding
temp schema. That worked fine in the past, but was broken by commit
debcec7dc3 which incorrectly removed the
rd_islocaltemp relcache flag. Put it back, and undo various changes
that substituted tests like "rel->rd_backend == MyBackendId" for use
of a state-aware flag. Per trouble report from Heikki Linnakangas.
Back-patch to 9.1 where the erroneous change was made. In the back
branches, be careful to add rd_islocaltemp in a spot in the struct that
was alignment padding before, so as not to break existing add-on code.
We failed to ever fill the sixth line (LISTEN_ADDR), which caused the
attempt to fill the seventh line (SHMEM_KEY) to fail, so that the shared
memory key never got added to the file in standalone mode. This has been
broken since we added more content to our lock files in 9.1.
To fix, tweak the logic in CreateLockFile to add an empty LISTEN_ADDR
line in standalone mode. This is a tad grotty, but since that function
already knows almost everything there is to know about the contents of
lock files, it doesn't seem that it's any better to hack it elsewhere.
It's not clear how significant this bug really is, since a standalone
backend should never have any children and thus it seems not critical
to be able to check the nattch count of the shmem segment externally.
But I'm going to back-patch the fix anyway.
This problem had escaped notice because of an ancient (and in hindsight
pretty dubious) decision to suppress LOG-level messages by default in
standalone mode; so that the elog(LOG) complaint in AddToDataDirLockFile
that should have warned of the problem didn't do anything. Fixing that
is material for a separate patch though.
Before this patch, streaming replication would refuse to start replicating
if the timeline in the primary doesn't exactly match the standby. The
situation where it doesn't match is when you have a master, and two
standbys, and you promote one of the standbys to become new master.
Promoting bumps up the timeline ID, and after that bump, the other standby
would refuse to continue.
There's significantly more timeline related logic in streaming replication
now. First of all, when a standby connects to primary, it will ask the
primary for any timeline history files that are missing from the standby.
The missing files are sent using a new replication command TIMELINE_HISTORY,
and stored in standby's pg_xlog directory. Using the timeline history files,
the standby can follow the latest timeline present in the primary
(recovery_target_timeline='latest'), just as it can follow new timelines
appearing in an archive directory.
START_REPLICATION now takes a TIMELINE parameter, to specify exactly which
timeline to stream WAL from. This allows the standby to request the primary
to send over WAL that precedes the promotion. The replication protocol is
changed slightly (in a backwards-compatible way although there's little hope
of streaming replication working across major versions anyway), to allow
replication to stop when the end of timeline reached, putting the walsender
back into accepting a replication command.
Many thanks to Amit Kapila for testing and reviewing various versions of
this patch.
Heikki Linnakangas